mx35: adjust default environment for flea3 board
[oweals/u-boot.git] / include / configs / rk3288_common.h
1 /*
2  * (C) Copyright 2015 Google, Inc
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_RK3288_COMMON_H
8 #define __CONFIG_RK3288_COMMON_H
9
10 #include <asm/arch/hardware.h>
11 #include "rockchip-common.h"
12
13 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
14 #define CONFIG_SYS_NO_FLASH
15 #define CONFIG_NR_DRAM_BANKS            1
16 #define CONFIG_ENV_SIZE                 0x2000
17 #define CONFIG_SYS_MAXARGS              16
18 #define CONFIG_BAUDRATE                 115200
19 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
20 #define CONFIG_SYS_CBSIZE               1024
21 #define CONFIG_SYS_THUMB_BUILD
22
23 #define CONFIG_SYS_TIMER_RATE           (24 * 1000 * 1000)
24 #define CONFIG_SYS_TIMER_BASE           0xff810020 /* TIMER7 */
25 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMER_BASE + 8)
26
27 #define CONFIG_SPL_FRAMEWORK
28 #define CONFIG_SYS_NS16550_MEM32
29 #define CONFIG_SPL_BOARD_INIT
30
31 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
32 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
33 #define CONFIG_SYS_TEXT_BASE            0x00000000
34 #else
35 #define CONFIG_SYS_TEXT_BASE            0x00100000
36 #endif
37 #define CONFIG_SYS_INIT_SP_ADDR         0x00100000
38 #define CONFIG_SYS_LOAD_ADDR            0x00800800
39 #define CONFIG_SPL_STACK                0xff718000
40 #define CONFIG_SPL_TEXT_BASE            0xff704004
41
42 /* MMC/SD IP block */
43 #define CONFIG_MMC
44 #define CONFIG_GENERIC_MMC
45 #define CONFIG_DWMMC
46 #define CONFIG_BOUNCE_BUFFER
47
48 #define CONFIG_FAT_WRITE
49 #define CONFIG_PARTITION_UUIDS
50 #define CONFIG_CMD_PART
51
52 /* RAW SD card / eMMC locations. */
53 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
54 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
55
56 /* FAT sd card locations. */
57 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
58 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
59
60 #define CONFIG_SYS_SDRAM_BASE           0
61 #define CONFIG_NR_DRAM_BANKS            1
62 #define SDRAM_BANK_SIZE                 (2UL << 30)
63
64 #define CONFIG_SPI_FLASH
65 #define CONFIG_SPI
66 #define CONFIG_SF_DEFAULT_SPEED 20000000
67
68 #ifndef CONFIG_SPL_BUILD
69 /* usb otg */
70 #define CONFIG_USB_GADGET
71 #define CONFIG_USB_GADGET_DUALSPEED
72 #define CONFIG_USB_GADGET_DWC2_OTG
73 #define CONFIG_ROCKCHIP_USB2_PHY
74 #define CONFIG_USB_GADGET_VBUS_DRAW     0
75
76 /* fastboot  */
77 #define CONFIG_CMD_FASTBOOT
78 #define CONFIG_USB_FUNCTION_FASTBOOT
79 #define CONFIG_FASTBOOT_FLASH
80 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1       /* eMMC */
81 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
82 #define CONFIG_FASTBOOT_BUF_SIZE        0x08000000
83
84 /* usb mass storage */
85 #define CONFIG_USB_FUNCTION_MASS_STORAGE
86 #define CONFIG_CMD_USB_MASS_STORAGE
87
88 #define CONFIG_USB_GADGET_DOWNLOAD
89 #define CONFIG_G_DNL_MANUFACTURER       "Rockchip"
90 #define CONFIG_G_DNL_VENDOR_NUM         0x2207
91 #define CONFIG_G_DNL_PRODUCT_NUM        0x320a
92
93 #define ENV_MEM_LAYOUT_SETTINGS \
94         "scriptaddr=0x00000000\0" \
95         "pxefile_addr_r=0x00100000\0" \
96         "fdt_addr_r=0x01f00000\0" \
97         "kernel_addr_r=0x02000000\0" \
98         "ramdisk_addr_r=0x04000000\0"
99
100 #include <config_distro_bootcmd.h>
101
102 /* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
103  * limit the fdt reallocation to that */
104 #define CONFIG_EXTRA_ENV_SETTINGS \
105         "fdt_high=0x0fffffff\0" \
106         "initrd_high=0x0fffffff\0" \
107         "partitions=" PARTS_DEFAULT \
108         ENV_MEM_LAYOUT_SETTINGS \
109         ROCKCHIP_DEVICE_SETTINGS \
110         BOOTENV
111 #endif
112
113 #define CONFIG_BOARD_LATE_INIT
114 #define CONFIG_PREBOOT
115
116 #endif