include/configs/pcl063_ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Board configuration file for Phytec phyBOARD-i.MX6ULL-Segin SBC
   4  * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
   5  *
   6  * Based on include/configs/xpress.h:
   7  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
   8  */
   9 #ifndef __PCL063_ULL_H
  10 #define __PCL063_ULL_H
  11
  12 #include <linux/sizes.h>
  13 #include <linux/stringify.h>
  14 #include "mx6_common.h"
  15
  16 /* SPL options */
  17 #include "imx6_spl.h"
  18
  19 #define CONFIG_SYS_FSL_USDHC_NUM        2
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  23
  24 /* Environment settings */
  25
  26 /* Environment in SD */
  27 #define CONFIG_SYS_MMC_ENV_DEV          0
  28 #define CONFIG_SYS_MMC_ENV_PART         0
  29 #define MMC_ROOTFS_DEV          0
  30 #define MMC_ROOTFS_PART         2
  31
  32 /* Console configs */
  33 #define CONFIG_MXC_UART_BASE            UART1_BASE
  34
  35 /* MMC Configs */
  36
  37 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  38 #define CONFIG_SUPPORT_EMMC_BOOT
  39
  40 /* I2C configs */
  41 #ifdef CONFIG_CMD_I2C
  42 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  43 #define CONFIG_SYS_I2C_SPEED            100000
  44 #endif
  45
  46 /* Miscellaneous configurable options */
  47
  48 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  49 #define CONFIG_SYS_HZ                   1000
  50
  51 /* Physical Memory Map */
  52 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  53 #define PHYS_SDRAM_SIZE                 SZ_256M
  54
  55 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  56 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  57 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  58
  59 #define CONFIG_SYS_INIT_SP_OFFSET \
  60         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  61 #define CONFIG_SYS_INIT_SP_ADDR \
  62         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  63
  64 /* NAND */
  65 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  66 #define CONFIG_SYS_NAND_BASE            0x40000000
  67
  68 /* USB Configs */
  69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  70 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  71 #define CONFIG_MXC_USB_FLAGS            0
  72 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  73
  74 #define CONFIG_IMX_THERMAL
  75
  76 #define ENV_MMC \
  77         "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
  78         "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
  79         "fitpart=1\0" \
  80         "bootdelay=3\0" \
  81         "silent=1\0" \
  82         "optargs=rw rootwait\0" \
  83         "mmcautodetect=yes\0" \
  84         "mmcrootfstype=ext4\0" \
  85         "mmcfit_name=fitImage\0" \
  86         "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
  87                     "${mmcfit_name}\0" \
  88         "mmcargs=setenv bootargs " \
  89                 "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
  90                 "console=${console} rootfstype=${mmcrootfstype}\0" \
  91         "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
  92
  93 /* Default environment */
  94 #define CONFIG_EXTRA_ENV_SETTINGS \
  95         "fdt_high=0xffffffff\0" \
  96         "console=ttymxc0,115200n8\0" \
  97         "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
  98         "fit_addr=0x82000000\0" \
  99         ENV_MMC
 100
 101 #define CONFIG_BOOTCOMMAND              "run mmc_mmc_fit"
 102
 103 #define BOOT_TARGET_DEVICES(func) \
 104         func(MMC, mmc, 0) \
 105         func(MMC, mmc, 1) \
 106         func(DHCP, dhcp, na)
 107
 108 #include <config_distro_bootcmd.h>
 109
 110 #endif /* __PCL063_ULL_H */