include/configs/omap3_evm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuration settings for the TI OMAP3 EVM board.
   4  *
   5  * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
   6  *
   7  * Author :
   8  *      Manikandan Pillai <mani.pillai@ti.com>
   9  * Derived from Beagle Board and 3430 SDP code by
  10  *      Richard Woodruff <r-woodruff2@ti.com>
  11  *      Syed Mohammed Khasim <khasim@ti.com>
  12  *
  13  * Manikandan Pillai <mani.pillai@ti.com>
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18
  19 #include <configs/ti_omap3_common.h>
  20
  21 /*
  22  * We are only ever GP parts and will utilize all of the "downloaded image"
  23  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  24  */
  25
  26 #define CONFIG_CMDLINE_TAG
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29 #define CONFIG_REVISION_TAG
  30
  31 /* NAND */
  32 #if defined(CONFIG_NAND)
  33 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
  34 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  35 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  36 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  37 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  38 #define CONFIG_SYS_NAND_OOBSIZE         64
  39 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  40 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  41 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
  42                                          10, 11, 12, 13}
  43 #define CONFIG_SYS_NAND_ECCSIZE         512
  44 #define CONFIG_SYS_NAND_ECCBYTES        3
  45 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
  46 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
  47 #define CONFIG_ENV_OFFSET               0x260000
  48 #define CONFIG_ENV_ADDR                 0x260000
  49 #define CONFIG_ENV_OVERWRITE
  50 /* NAND: SPL falcon mode configs */
  51 #if defined(CONFIG_SPL_OS_BOOT)
  52 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
  53 #endif /* CONFIG_SPL_OS_BOOT */
  54 #endif /* CONFIG_NAND */
  55
  56 /* Environment */
  57 #define CONFIG_ENV_SIZE                 SZ_128K
  58
  59 #define CONFIG_PREBOOT                  "usb start"
  60
  61 #define MEM_LAYOUT_ENV_SETTINGS \
  62         DEFAULT_LINUX_BOOT_ENV
  63
  64 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
  65         "bootcmd_" #devtypel #instance "=" \
  66         "setenv mmcdev " #instance "; " \
  67         "run mmcboot\0"
  68 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
  69         #devtypel #instance " "
  70
  71 #if defined(CONFIG_NAND)
  72
  73 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
  74         "bootcmd_" #devtypel #instance "=" \
  75         "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
  76                 "echo NAND boot disabled: No mtdids and/or mtdparts; " \
  77         "else " \
  78                 "run nandboot; " \
  79         "fi\0"
  80 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
  81         #devtypel #instance " "
  82
  83 #define BOOT_TARGET_DEVICES(func) \
  84         func(MMC, mmc, 0) \
  85         func(LEGACY_MMC, legacy_mmc, 0) \
  86         func(UBIFS, ubifs, 0) \
  87         func(NAND, nand, 0)
  88
  89 #else /* !CONFIG_NAND */
  90
  91 #define BOOT_TARGET_DEVICES(func) \
  92         func(MMC, mmc, 0) \
  93         func(LEGACY_MMC, legacy_mmc, 0)
  94
  95 #endif /* CONFIG_NAND */
  96
  97 #include <config_distro_bootcmd.h>
  98
  99 #define CONFIG_EXTRA_ENV_SETTINGS \
 100         MEM_LAYOUT_ENV_SETTINGS \
 101         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 102         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 103         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 104         "fdt_high=0xffffffff\0" \
 105         "console=ttyO0,115200n8\0" \
 106         "bootdir=/boot\0" \
 107         "bootenv=uEnv.txt\0" \
 108         "bootfile=zImage\0" \
 109         "bootpart=0:2\0" \
 110         "bootubivol=rootfs\0" \
 111         "bootubipart=rootfs\0" \
 112         "optargs=\0" \
 113         "mmcdev=0\0" \
 114         "mmcpart=2\0" \
 115         "mmcroot=/dev/mmcblk0p2 rw\0" \
 116         "mmcrootfstype=ext4 rootwait\0" \
 117         "mmcargs=setenv bootargs console=${console} " \
 118                 "${mtdparts} " \
 119                 "${optargs} " \
 120                 "root=${mmcroot} " \
 121                 "rootfstype=${mmcrootfstype}\0" \
 122         "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 123         "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
 124         "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 125                 "env import -t ${loadaddr} ${filesize}\0" \
 126         "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
 127                 "mmc dev ${mmcdev}; " \
 128                 "if mmc rescan; then " \
 129                         "run loadbootenv && run importbootenv; " \
 130                         "run ext4bootenv && run importbootenv; " \
 131                         "if test -n $uenvcmd; then " \
 132                                 "echo Running uenvcmd ...; " \
 133                                 "run uenvcmd; " \
 134                         "fi; " \
 135                 "fi\0" \
 136         "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 137         "loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 138         "mmcboot=run mmcbootenv; " \
 139                 "if run loadimage && run loaddtb; then " \
 140                         "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
 141                         "run mmcargs; " \
 142                         "if test ${bootfile} = uImage; then " \
 143                                 "bootm ${loadaddr} - ${fdtaddr}; " \
 144                         "fi; " \
 145                         "if test ${bootfile} = zImage; then " \
 146                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 147                         "fi; " \
 148                 "fi\0" \
 149         "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
 150         "nandrootfstype=ubifs rootwait\0" \
 151         "nandargs=setenv bootargs console=${console} " \
 152                 "${mtdparts} " \
 153                 "${optargs} " \
 154                 "root=${nandroot} " \
 155                 "rootfstype=${nandrootfstype}\0" \
 156         "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
 157                         "echo Booting uImage from NAND MTD 'kernel' partition ...; " \
 158                         "run nandargs; " \
 159                         "bootm ${loadaddr} - ${fdtaddr}; " \
 160                 "fi\0" \
 161         BOOTENV
 162
 163 #endif /* __CONFIG_H */