include/configs/nokia_rx51.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011-2012
   4  * Pali Rohár <pali.rohar@gmail.com>
   5  *
   6  * (C) Copyright 2010
   7  * Alistair Buxton <a.j.buxton@gmail.com>
   8  *
   9  * Derived from Beagle Board code:
  10  * (C) Copyright 2006-2008
  11  * Texas Instruments.
  12  * Richard Woodruff <r-woodruff2@ti.com>
  13  * Syed Mohammed Khasim <x0khasim@ti.com>
  14  *
  15  * Configuration settings for the Nokia RX-51 aka N900.
  16  */
  17
  18 #ifndef __CONFIG_H
  19 #define __CONFIG_H
  20
  21 /*
  22  * High Level Configuration Options
  23  */
  24 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
  25
  26 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
  27
  28 /*
  29  * Nokia X-Loader loading secondary image to address 0x80400000
  30  * NOLO loading boot image to random place, so it doesn't really
  31  * matter what we set this to. We have to copy u-boot to this address
  32  */
  33
  34 #include <asm/arch/cpu.h>               /* get chip and board defs */
  35 #include <asm/arch/omap.h>
  36 #include <asm/arch/mem.h>
  37 #include <linux/stringify.h>
  38
  39 /* Clock Defines */
  40 #define V_OSCK                  26000000        /* Clock output from T2 */
  41 #define V_SCLK                  (V_OSCK >> 1)
  42
  43 #define CONFIG_MISC_INIT_R
  44 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
  45
  46 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
  47 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
  48 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
  49 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
  50
  51 /*
  52  * Size of malloc() pool
  53  */
  54 #define CONFIG_ENV_SIZE                 (128 << 10)
  55 #define CONFIG_UBI_SIZE                 (512 << 10)
  56 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
  57                                         (128 << 10))
  58
  59 /*
  60  * Hardware drivers
  61  */
  62
  63 /*
  64  * NS16550 Configuration
  65  */
  66 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
  67
  68 #define CONFIG_SYS_NS16550_SERIAL
  69 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  70 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  71
  72 /*
  73  * select serial console configuration
  74  */
  75 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  76 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
  77
  78 /* allow to overwrite serial and ethaddr */
  79 #define CONFIG_ENV_OVERWRITE
  80 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
  81
  82 /* USB device configuration */
  83 #define CONFIG_USB_DEVICE
  84 #define CONFIG_USBD_VENDORID            0x0421
  85 #define CONFIG_USBD_PRODUCTID           0x01c8
  86 #define CONFIG_USBD_MANUFACTURER        "Nokia"
  87 #define CONFIG_USBD_PRODUCT_NAME        "N900"
  88
  89 /* commands to include */
  90
  91 #define CONFIG_SYS_I2C
  92
  93 /*
  94  * TWL4030
  95  */
  96 #define CONFIG_TWL4030_LED
  97 #define CONFIG_TWL4030_KEYPAD
  98
  99 #define GPIO_SLIDE                      71
 100
 101 /*
 102  * Board ONENAND Info.
 103  */
 104
 105 #define PART1_NAME                      "bootloader"
 106 #define PART1_SIZE                      128
 107 #define PART1_MULL                      1024
 108 #define PART1_SUFF                      "k"
 109 #define PART1_OFFS                      0x00000000
 110 #define PART1_MASK                      0x00000003
 111
 112 #define PART2_NAME                      "config"
 113 #define PART2_SIZE                      384
 114 #define PART2_MULL                      1024
 115 #define PART2_SUFF                      "k"
 116 #define PART2_OFFS                      0x00020000
 117 #define PART2_MASK                      0x00000000
 118
 119 #define PART3_NAME                      "log"
 120 #define PART3_SIZE                      256
 121 #define PART3_MULL                      1024
 122 #define PART3_SUFF                      "k"
 123 #define PART3_OFFS                      0x00080000
 124 #define PART3_MASK                      0x00000000
 125
 126 #define PART4_NAME                      "kernel"
 127 #define PART4_SIZE                      2
 128 #define PART4_MULL                      1024*1024
 129 #define PART4_SUFF                      "m"
 130 #define PART4_OFFS                      0x000c0000
 131 #define PART4_MASK                      0x00000000
 132
 133 #define PART5_NAME                      "initfs"
 134 #define PART5_SIZE                      2
 135 #define PART5_MULL                      1024*1024
 136 #define PART5_SUFF                      "m"
 137 #define PART5_OFFS                      0x002c0000
 138 #define PART5_MASK                      0x00000000
 139
 140 #define PART6_NAME                      "rootfs"
 141 #define PART6_SIZE                      257280
 142 #define PART6_MULL                      1024
 143 #define PART6_SUFF                      "k"
 144 #define PART6_OFFS                      0x004c0000
 145 #define PART6_MASK                      0x00000000
 146
 147 #ifdef ONENAND_SUPPORT
 148
 149 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 150 #define CONFIG_MTD_DEVICE
 151 #define CONFIG_MTD_PARTITIONS
 152
 153 #endif
 154
 155 /* Watchdog support */
 156 #define CONFIG_HW_WATCHDOG
 157
 158 /*
 159  * Framebuffer
 160  */
 161 /* Video console */
 162 #define CONFIG_VIDEO_LOGO
 163 #define VIDEO_FB_16BPP_PIXEL_SWAP
 164 #define VIDEO_FB_16BPP_WORD_SWAP
 165 #define CONFIG_SPLASH_SCREEN
 166
 167 /* functions for cfb_console */
 168 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
 169 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
 170 #define VIDEO_GETC_FCT                  rx51_kp_getc
 171 #ifndef __ASSEMBLY__
 172 struct stdio_dev;
 173 int rx51_kp_init(void);
 174 int rx51_kp_tstc(struct stdio_dev *sdev);
 175 int rx51_kp_getc(struct stdio_dev *sdev);
 176 #endif
 177
 178 /* Environment information */
 179 #ifdef CONFIG_MTDPARTS_DEFAULT
 180 #define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 181 #else
 182 #define MTDPARTS
 183 #endif
 184 #define CONFIG_EXTRA_ENV_SETTINGS \
 185         MTDPARTS \
 186         "usbtty=cdc_acm\0" \
 187         "stdin=vga\0" \
 188         "stdout=vga\0" \
 189         "stderr=vga\0" \
 190         "setcon=setenv stdin ${con};" \
 191                 "setenv stdout ${con};" \
 192                 "setenv stderr ${con}\0" \
 193         "sercon=setenv con serial; run setcon\0" \
 194         "usbcon=setenv con usbtty; run setcon\0" \
 195         "vgacon=setenv con vga; run setcon\0" \
 196         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 197         "switchmmc=mmc dev ${mmcnum}\0" \
 198         "kernaddr=0x82008000\0" \
 199         "initrdaddr=0x84008000\0" \
 200         "scriptaddr=0x86008000\0" \
 201         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
 202                 "${loadaddr} ${mmcfile}\0" \
 203         "kernload=setenv loadaddr ${kernaddr};" \
 204                 "setenv mmcfile ${mmckernfile};" \
 205                 "run fileload\0" \
 206         "initrdload=setenv loadaddr ${initrdaddr};" \
 207                 "setenv mmcfile ${mmcinitrdfile};" \
 208                 "run fileload\0" \
 209         "scriptload=setenv loadaddr ${scriptaddr};" \
 210                 "setenv mmcfile ${mmcscriptfile};" \
 211                 "run fileload\0" \
 212         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
 213                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
 214         "kernboot=echo Booting ${mmckernfile} from mmc " \
 215                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
 216         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
 217                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
 218         "attachboot=echo Booting attached kernel image ...;" \
 219                 "setenv setup_omap_atag 1;" \
 220                 "bootm ${attkernaddr};" \
 221                 "setenv setup_omap_atag\0" \
 222         "trymmcscriptboot=if run switchmmc; then " \
 223                         "if run scriptload; then " \
 224                                 "run scriptboot;" \
 225                         "fi;" \
 226                 "fi\0" \
 227         "trymmckernboot=if run switchmmc; then " \
 228                         "if run kernload; then " \
 229                                 "run kernboot;" \
 230                         "fi;" \
 231                 "fi\0" \
 232         "trymmckerninitrdboot=if run switchmmc; then " \
 233                         "if run initrdload; then " \
 234                                 "if run kernload; then " \
 235                                         "run kerninitrdboot;" \
 236                                 "fi;" \
 237                         "fi; " \
 238                 "fi\0" \
 239         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
 240                 "setenv mmckernfile uImage; run trymmckernboot\0" \
 241         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
 242                 "setenv mmcpart 2; run trymmcpartboot;" \
 243                 "setenv mmcpart 3; run trymmcpartboot;" \
 244                 "setenv mmcpart 4; run trymmcpartboot\0" \
 245         "trymmcboot=if run switchmmc; then " \
 246                         "setenv mmctype fat;" \
 247                         "run trymmcallpartboot;" \
 248                         "setenv mmctype ext2;" \
 249                         "run trymmcallpartboot;" \
 250                         "setenv mmctype ext4;" \
 251                         "run trymmcallpartboot;" \
 252                 "fi\0" \
 253         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
 254         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
 255         "menucmd=bootmenu\0" \
 256         "bootmenu_0=Attached kernel=run attachboot\0" \
 257         "bootmenu_1=Internal eMMC=run emmcboot\0" \
 258         "bootmenu_2=External SD card=run sdboot\0" \
 259         "bootmenu_3=U-Boot boot order=boot\0" \
 260         "bootmenu_delay=30\0" \
 261         ""
 262
 263 #define CONFIG_PREBOOT \
 264         "setenv mmcnum 1; setenv mmcpart 1;" \
 265         "setenv mmcscriptfile bootmenu.scr;" \
 266         "if run switchmmc; then " \
 267                 "setenv mmcdone true;" \
 268                 "setenv mmctype fat;" \
 269                 "if run scriptload; then true; else " \
 270                         "setenv mmctype ext2;" \
 271                         "if run scriptload; then true; else " \
 272                                 "setenv mmctype ext4;" \
 273                                 "if run scriptload; then true; else " \
 274                                         "setenv mmcdone false;" \
 275                                 "fi;" \
 276                         "fi;" \
 277                 "fi;" \
 278                 "if ${mmcdone}; then " \
 279                         "run scriptboot;" \
 280                 "fi;" \
 281         "fi;" \
 282         "if run slide; then true; else " \
 283                 "setenv bootmenu_delay 0;" \
 284                 "setenv bootdelay 0;" \
 285         "fi"
 286
 287 #define CONFIG_POSTBOOTMENU \
 288         "echo;" \
 289         "echo Extra commands:;" \
 290         "echo run sercon - Use serial port for control.;" \
 291         "echo run usbcon - Use usbtty for control.;" \
 292         "echo run vgacon - Use framebuffer/keyboard.;" \
 293         "echo run sdboot - Boot from SD card slot.;" \
 294         "echo run emmcboot - Boot internal eMMC memory.;" \
 295         "echo run attachboot - Boot attached kernel image.;" \
 296         "echo"
 297
 298 #define CONFIG_BOOTCOMMAND \
 299         "run sdboot;" \
 300         "run emmcboot;" \
 301         "run attachboot;" \
 302         "echo"
 303
 304 #define CONFIG_MENU_SHOW
 305
 306 /*
 307  * Miscellaneous configurable options
 308  */
 309
 310 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 311 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 312
 313 /* default load address */
 314 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
 315
 316 /*
 317  * OMAP3 has 12 GP timers, they can be driven by the system clock
 318  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 319  * This rate is divided by a local divisor.
 320  */
 321 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 322 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 323
 324 /*
 325  * Physical Memory Map
 326  */
 327 #define CONFIG_NR_DRAM_BANKS            2
 328 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 329
 330 /*
 331  * FLASH and environment organization
 332  */
 333
 334 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 335 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 336 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 337 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 338                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 339
 340 /*
 341  * Attached kernel image
 342  */
 343
 344 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
 345 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
 346
 347 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
 348 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
 349 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
 350 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
 351
 352 /* Reserve protected RAM for attached kernel */
 353 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
 354
 355 #endif /* __CONFIG_H */