include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  14 #define CONFIG_SPL_MMC_SUPPORT
  15 #include "imx6_spl.h"
  16
  17 #define CONFIG_IMX6_THERMAL
  18
  19 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_BOARD_LATE_INIT
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_CMD_FUSE
  24 #define CONFIG_MXC_OCOTP
  25
  26 /* MMC Configs */
  27 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  28
  29 /* Ethernet Configuration */
  30 #define CONFIG_FEC_MXC
  31 #define CONFIG_CMD_PING
  32 #define CONFIG_CMD_DHCP
  33 #define CONFIG_CMD_MII
  34 #define CONFIG_CMD_NET
  35 #define CONFIG_MII
  36 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  37 #define CONFIG_FEC_XCV_TYPE             RGMII
  38 #define CONFIG_FEC_MXC_PHYADDR          0
  39 #define CONFIG_PHYLIB
  40 #define CONFIG_PHY_ATHEROS
  41
  42 /* Framebuffer */
  43 #define CONFIG_VIDEO
  44 #define CONFIG_VIDEO_IPUV3
  45 #define CONFIG_IPUV3_CLK                260000000
  46 #define CONFIG_CFB_CONSOLE
  47 #define CONFIG_VGA_AS_SINGLE_DEVICE
  48 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  49 #define CONFIG_VIDEO_BMP_RLE8
  50 #define CONFIG_SPLASH_SCREEN
  51 #define CONFIG_SPLASH_SCREEN_ALIGN
  52 #define CONFIG_BMP_16BPP
  53 #define CONFIG_VIDEO_LOGO
  54 #define CONFIG_VIDEO_BMP_LOGO
  55 #define CONFIG_IMX_HDMI
  56 #define CONFIG_CMD_HDMIDETECT
  57 #define CONFIG_IMX_VIDEO_SKIP
  58 #define CONFIG_CONSOLE_MUX
  59
  60 /* USB */
  61 #define CONFIG_CMD_USB
  62 #define CONFIG_USB_EHCI
  63 #define CONFIG_USB_EHCI_MX6
  64 #define CONFIG_USB_STORAGE
  65 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  66 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  67 #define CONFIG_MXC_USB_FLAGS            0
  68 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  69 #define CONFIG_USB_KEYBOARD
  70 #define CONFIG_SYS_USB_EVENT_POLL
  71 #define CONFIG_PREBOOT \
  72         "if hdmidet; then " \
  73                 "usb start; "                  \
  74                 "setenv stdin  serial,usbkbd; "\
  75                 "setenv stdout serial,vga; "   \
  76                 "setenv stderr serial,vga; "   \
  77         "else " \
  78                 "setenv stdin  serial; " \
  79                 "setenv stdout serial; " \
  80                 "setenv stderr serial; " \
  81         "fi;"
  82
  83 /* Command definition */
  84 #define CONFIG_CMD_SETEXPR
  85
  86 #define CONFIG_MXC_UART_BASE    UART1_BASE
  87 #define CONFIG_CONSOLE_DEV      "ttymxc0"
  88 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
  89 #define CONFIG_SYS_FSL_USDHC_NUM        1
  90 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
  91
  92 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  93 #define CONFIG_EXTRA_ENV_SETTINGS \
  94         "script=boot.scr\0" \
  95         "image=zImage\0" \
  96         "fdtfile=undefined\0" \
  97         "fdt_addr_r=0x18000000\0" \
  98         "boot_fdt=try\0" \
  99         "ip_dyn=yes\0" \
 100         "console=" CONFIG_CONSOLE_DEV "\0" \
 101         "bootm_size=0x10000000\0" \
 102         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 103         "mmcpart=1\0" \
 104         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 105         "update_sd_firmware=" \
 106                 "if test ${ip_dyn} = yes; then " \
 107                         "setenv get_cmd dhcp; " \
 108                 "else " \
 109                         "setenv get_cmd tftp; " \
 110                 "fi; " \
 111                 "if mmc dev ${mmcdev}; then "   \
 112                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 113                                 "setexpr fw_sz ${filesize} / 0x200; " \
 114                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 115                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 116                         "fi; "  \
 117                 "fi\0" \
 118         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 119                 "root=${mmcroot}\0" \
 120         "loadbootscript=" \
 121                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 122         "bootscript=echo Running bootscript from mmc ...; " \
 123                 "source\0" \
 124         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 125         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 126         "mmcboot=echo Booting from mmc ...; " \
 127                 "run mmcargs; " \
 128                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 129                         "if run loadfdt; then " \
 130                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 131                         "else " \
 132                                 "if test ${boot_fdt} = try; then " \
 133                                         "bootz; " \
 134                                 "else " \
 135                                         "echo WARN: Cannot load the DT; " \
 136                                 "fi; " \
 137                         "fi; " \
 138                 "else " \
 139                         "bootz; " \
 140                 "fi;\0" \
 141         "netargs=setenv bootargs console=${console},${baudrate} " \
 142                 "root=/dev/nfs " \
 143                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 144         "netboot=echo Booting from net ...; " \
 145                 "run netargs; " \
 146                 "if test ${ip_dyn} = yes; then " \
 147                         "setenv get_cmd dhcp; " \
 148                 "else " \
 149                         "setenv get_cmd tftp; " \
 150                 "fi; " \
 151                 "${get_cmd} ${image}; " \
 152                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 153                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 154                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 155                         "else " \
 156                                 "if test ${boot_fdt} = try; then " \
 157                                         "bootz; " \
 158                                 "else " \
 159                                         "echo WARN: Cannot load the DT; " \
 160                                 "fi; " \
 161                         "fi; " \
 162                 "else " \
 163                         "bootz; " \
 164                 "fi;\0" \
 165         "findfdt="\
 166                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 167                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 168                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 169                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 170                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 171                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 172                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 173                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 174                 "if test $fdtfile = undefined; then " \
 175                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 176
 177 #define CONFIG_BOOTCOMMAND \
 178         "run findfdt; " \
 179         "mmc dev ${mmcdev};" \
 180         "if mmc rescan; then " \
 181                 "if run loadbootscript; then " \
 182                 "run bootscript; " \
 183                 "else " \
 184                         "if run loadimage; then " \
 185                                 "run mmcboot; " \
 186                         "else run netboot; " \
 187                         "fi; " \
 188                 "fi; " \
 189         "else run netboot; fi"
 190
 191 /* Miscellaneous configurable options */
 192 #define CONFIG_SYS_LONGHELP
 193 #define CONFIG_SYS_HUSH_PARSER
 194 #define CONFIG_AUTO_COMPLETE
 195 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 196
 197 #define CONFIG_CMDLINE_EDITING
 198
 199 /* Physical Memory Map */
 200 #define CONFIG_NR_DRAM_BANKS           1
 201 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 202 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 203 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 204
 205 #define CONFIG_SYS_INIT_SP_OFFSET \
 206         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 207 #define CONFIG_SYS_INIT_SP_ADDR \
 208         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 209
 210 /* Environment organization */
 211 #define CONFIG_ENV_SIZE                 (8 * 1024)
 212 #define CONFIG_ENV_IS_IN_MMC
 213 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 214
 215 #endif                         /* __MX6CUBOXI_CONFIG_H */