include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  14 #define CONFIG_SPL_MMC_SUPPORT
  15 #include "imx6_spl.h"
  16
  17 #define CONFIG_IMX_THERMAL
  18
  19 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_BOARD_LATE_INIT
  22 #define CONFIG_MXC_UART
  23
  24 /* MMC Configs */
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  26
  27 /* Ethernet Configuration */
  28 #define CONFIG_FEC_MXC
  29 #define CONFIG_CMD_PING
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_MII
  32 #define CONFIG_MII
  33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  34 #define CONFIG_FEC_XCV_TYPE             RGMII
  35 #define CONFIG_FEC_MXC_PHYADDR          0
  36 #define CONFIG_PHYLIB
  37 #define CONFIG_PHY_ATHEROS
  38
  39 /* Framebuffer */
  40 #define CONFIG_VIDEO
  41 #define CONFIG_VIDEO_IPUV3
  42 #define CONFIG_IPUV3_CLK                260000000
  43 #define CONFIG_CFB_CONSOLE
  44 #define CONFIG_VGA_AS_SINGLE_DEVICE
  45 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  46 #define CONFIG_VIDEO_BMP_RLE8
  47 #define CONFIG_SPLASH_SCREEN
  48 #define CONFIG_SPLASH_SCREEN_ALIGN
  49 #define CONFIG_BMP_16BPP
  50 #define CONFIG_VIDEO_LOGO
  51 #define CONFIG_VIDEO_BMP_LOGO
  52 #define CONFIG_IMX_HDMI
  53 #define CONFIG_CMD_HDMIDETECT
  54 #define CONFIG_IMX_VIDEO_SKIP
  55 #define CONFIG_CONSOLE_MUX
  56
  57 /* USB */
  58 #define CONFIG_CMD_USB
  59 #define CONFIG_USB_EHCI
  60 #define CONFIG_USB_EHCI_MX6
  61 #define CONFIG_USB_STORAGE
  62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  63 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  64 #define CONFIG_MXC_USB_FLAGS            0
  65 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  66 #define CONFIG_USB_KEYBOARD
  67 #define CONFIG_SYS_USB_EVENT_POLL
  68 #define CONFIG_PREBOOT \
  69         "if hdmidet; then " \
  70                 "usb start; "                  \
  71                 "setenv stdin  serial,usbkbd; "\
  72                 "setenv stdout serial,vga; "   \
  73                 "setenv stderr serial,vga; "   \
  74         "else " \
  75                 "setenv stdin  serial; " \
  76                 "setenv stdout serial; " \
  77                 "setenv stderr serial; " \
  78         "fi;"
  79
  80 /* Command definition */
  81
  82 #define CONFIG_MXC_UART_BASE    UART1_BASE
  83 #define CONFIG_CONSOLE_DEV      "ttymxc0"
  84 #define CONFIG_SYS_FSL_USDHC_NUM        1
  85 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
  86
  87 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  88 #ifndef CONFIG_SPL_BUILD
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         "fdtfile=undefined\0" \
  91         "fdt_addr_r=0x18000000\0" \
  92         "fdt_addr=0x18000000\0" \
  93         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
  94         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  95         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  96         "ramdisk_addr_r=0x13000000\0" \
  97         "ramdiskaddr=0x13000000\0" \
  98         "initrd_high=0xffffffff\0" \
  99         "fdt_high=0xffffffff\0" \
 100         "ip_dyn=yes\0" \
 101         "console=" CONFIG_CONSOLE_DEV "\0" \
 102         "bootm_size=0x10000000\0" \
 103         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 104         "update_sd_firmware=" \
 105                 "if test ${ip_dyn} = yes; then " \
 106                         "setenv get_cmd dhcp; " \
 107                 "else " \
 108                         "setenv get_cmd tftp; " \
 109                 "fi; " \
 110                 "if mmc dev ${mmcdev}; then "   \
 111                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 112                                 "setexpr fw_sz ${filesize} / 0x200; " \
 113                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 114                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 115                         "fi; "  \
 116                 "fi\0" \
 117         "findfdt="\
 118                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 119                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 120                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 121                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 122                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 123                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 124                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 125                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 126                 "if test $fdtfile = undefined; then " \
 127                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 128         BOOTENV
 129
 130 #define CONFIG_BOOTCOMMAND \
 131         "run findfdt; " \
 132         "run distro_bootcmd"
 133
 134 #define BOOT_TARGET_DEVICES(func) \
 135         func(MMC, mmc, 0) \
 136         func(USB, usb, 0) \
 137         func(PXE, pxe, na) \
 138         func(DHCP, dhcp, na)
 139
 140 #include <config_distro_defaults.h>
 141 #include <config_distro_bootcmd.h>
 142
 143 #else
 144 #define CONFIG_EXTRA_ENV_SETTINGS
 145 #endif /* CONFIG_SPL_BUILD */
 146
 147 /* Physical Memory Map */
 148 #define CONFIG_NR_DRAM_BANKS           1
 149 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 150 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 151 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 152
 153 #define CONFIG_SYS_INIT_SP_OFFSET \
 154         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 155 #define CONFIG_SYS_INIT_SP_ADDR \
 156         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 157
 158 /* Environment organization */
 159 #define CONFIG_ENV_SIZE                 (8 * 1024)
 160 #define CONFIG_ENV_IS_IN_MMC
 161 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 162
 163 #endif                         /* __MX6CUBOXI_CONFIG_H */