include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_DISPLAY_CPUINFO
  22 #define CONFIG_SYS_FSL_CLK
  23
  24 /* Set TEXT at the beginning of the NOR flash */
  25 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  26
  27 #define CONFIG_BOARD_EARLY_INIT_F
  28 #define CONFIG_BOARD_LATE_INIT
  29
  30 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  31 #define CONFIG_REVISION_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34
  35 /*
  36  * Size of malloc() pool
  37  */
  38 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  39
  40 /*
  41  * Hardware drivers
  42  */
  43 #define CONFIG_SYS_I2C
  44 #define CONFIG_SYS_I2C_MXC
  45 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  46 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  48 #define CONFIG_MXC_SPI
  49 #define CONFIG_MXC_GPIO
  50
  51
  52 /*
  53  * PMIC Configs
  54  */
  55 #define CONFIG_POWER
  56 #define CONFIG_POWER_I2C
  57 #define CONFIG_POWER_FSL
  58 #define CONFIG_POWER_FSL_MC13892
  59 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  60 #define CONFIG_RTC_MC13XXX
  61
  62 /*
  63  * MFD MC9SDZ60
  64  */
  65 #define CONFIG_FSL_MC9SDZ60
  66 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  67
  68 /*
  69  * UART (console)
  70  */
  71 #define CONFIG_MXC_UART
  72 #define CONFIG_MXC_UART_BASE    UART1_BASE
  73
  74 /* allow to overwrite serial and ethaddr */
  75 #define CONFIG_ENV_OVERWRITE
  76 #define CONFIG_CONS_INDEX       1
  77 #define CONFIG_BAUDRATE         115200
  78
  79 /*
  80  * Command definition
  81  */
  82 #define CONFIG_CMD_BOOTZ
  83 #define CONFIG_BOOTP_SUBNETMASK
  84 #define CONFIG_BOOTP_GATEWAY
  85 #define CONFIG_BOOTP_DNS
  86
  87 #define CONFIG_CMD_NAND
  88 #define CONFIG_CMD_CACHE
  89
  90 #define CONFIG_CMD_MII
  91 #define CONFIG_NET_RETRY_COUNT  100
  92 #define CONFIG_CMD_DATE
  93
  94 #define CONFIG_USB_STORAGE
  95 #define CONFIG_CMD_MMC
  96 #define CONFIG_DOS_PARTITION
  97 #define CONFIG_EFI_PARTITION
  98 #define CONFIG_CMD_EXT2
  99 #define CONFIG_CMD_FAT
 100
 101 #define CONFIG_BOOTDELAY        1
 102
 103 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
 104
 105 /*
 106  * Ethernet on the debug board (SMC911)
 107  */
 108 #define CONFIG_SMC911X
 109 #define CONFIG_SMC911X_16_BIT 1
 110 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 111
 112 #define CONFIG_HAS_ETH1
 113 #define CONFIG_ETHPRIME
 114
 115 /*
 116  * Ethernet on SOC (FEC)
 117  */
 118 #define CONFIG_FEC_MXC
 119 #define IMX_FEC_BASE    FEC_BASE_ADDR
 120 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 121
 122 #define CONFIG_MII
 123
 124 #define CONFIG_ARP_TIMEOUT      200UL
 125
 126 /*
 127  * Miscellaneous configurable options
 128  */
 129 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 130 #define CONFIG_CMDLINE_EDITING
 131
 132 #define CONFIG_AUTO_COMPLETE
 133 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 134 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 135 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 136
 137 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 138 #define CONFIG_SYS_MEMTEST_END          0x10000
 139
 140 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 141
 142 /*
 143  * Physical Memory Map
 144  */
 145 #define CONFIG_NR_DRAM_BANKS    2
 146 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 147 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 148 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 149 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 150
 151 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 152 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 153 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 154 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 155                                         GENERATED_GBL_DATA_SIZE)
 156 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 157                                         CONFIG_SYS_GBL_DATA_OFFSET)
 158
 159 /*
 160  * MTD Command for mtdparts
 161  */
 162 #define CONFIG_CMD_MTDPARTS
 163 #define CONFIG_MTD_DEVICE
 164 #define CONFIG_FLASH_CFI_MTD
 165 #define CONFIG_MTD_PARTITIONS
 166 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 167 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 168                                 "96m(root),8m(cfg),1938m(user);"        \
 169                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 170
 171 /*
 172  * FLASH and environment organization
 173  */
 174 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 175 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 176 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 177 /* Monitor at beginning of flash */
 178 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 179 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 180
 181 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 182 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 183
 184 /* Address and size of Redundant Environment Sector     */
 185 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 186 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 187
 188 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 189                                 CONFIG_SYS_MONITOR_LEN)
 190
 191 #define CONFIG_ENV_IS_IN_FLASH
 192
 193 #if defined(CONFIG_FSL_ENV_IN_NAND)
 194         #define CONFIG_ENV_IS_IN_NAND
 195         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 196 #endif
 197
 198 /*
 199  * CFI FLASH driver setup
 200  */
 201 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 202 #define CONFIG_FLASH_CFI_DRIVER
 203
 204 /* A non-standard buffered write algorithm */
 205 #define CONFIG_FLASH_SPANSION_S29WS_N
 206 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 207 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 208
 209 /*
 210  * NAND FLASH driver setup
 211  */
 212 #define CONFIG_NAND_MXC
 213 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 214 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 215 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 216 #define CONFIG_MXC_NAND_HWECC
 217 #define CONFIG_SYS_NAND_LARGEPAGE
 218
 219 /* EHCI driver */
 220 #define CONFIG_USB_EHCI
 221 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      1
 222 #define CONFIG_EHCI_IS_TDI
 223 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 224 #define CONFIG_USB_EHCI_MXC
 225 #define CONFIG_MXC_USB_PORT     0
 226 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERFACE_DIFF_UNI | \
 227                                  MXC_EHCI_POWER_PINS_ENABLED | \
 228                                  MXC_EHCI_OC_PIN_ACTIVE_LOW)
 229 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 230
 231 /* mmc driver */
 232 #define CONFIG_MMC
 233 #define CONFIG_GENERIC_MMC
 234 #define CONFIG_FSL_ESDHC
 235 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 236 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 237
 238 /*
 239  * Default environment and default scripts
 240  * to update uboot and load kernel
 241  */
 242
 243 #define CONFIG_HOSTNAME "mx35pdk"
 244 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 245         "netdev=eth1\0"                                                 \
 246         "ethprime=smc911x\0"                                            \
 247         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 248                 "nfsroot=${serverip}:${rootpath}\0"                     \
 249         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 250         "addip_sta=setenv bootargs ${bootargs} "                        \
 251                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 252                 ":${hostname}:${netdev}:off panic=1\0"                  \
 253         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 254         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 255                 "else run addip_sta;fi\0"                               \
 256         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 257         "addtty=setenv bootargs ${bootargs}"                            \
 258                 " console=ttymxc0,${baudrate}\0"                        \
 259         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 260         "loadaddr=80800000\0"                                           \
 261         "kernel_addr_r=80800000\0"                                      \
 262         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 263         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 264         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 265         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 266                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 267         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 268                 "bootm ${kernel_addr}\0"                                \
 269         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 270                 "run nfsargs addip addtty addmtd addmisc;"              \
 271                 "bootm ${kernel_addr_r}\0"                              \
 272         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 273                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 274         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 275         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 276         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 277         "update=protect off ${uboot_addr} +80000;"                      \
 278                 "erase ${uboot_addr} +80000;"                           \
 279                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 280         "upd=if run load;then echo Updating u-boot;if run update;"      \
 281                 "then echo U-Boot updated;"                             \
 282                         "else echo Error updating u-boot !;"            \
 283                         "echo Board without bootloader !!;"             \
 284                 "fi;"                                                   \
 285                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 286         "bootcmd=run net_nfs\0"
 287
 288 #endif                          /* __CONFIG_H */