include/configs/mx25pdk.h

   1 /*
   2  * (C) Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <asm/arch/imx-regs.h>
  11
  12 /* High Level Configuration Options */
  13
  14 #define CONFIG_MX25
  15 #define CONFIG_SYS_TEXT_BASE            0x81200000
  16 #define CONFIG_MXC_GPIO
  17 #define CONFIG_SYS_GENERIC_BOARD
  18
  19 #define CONFIG_SYS_TIMER_RATE           32768
  20 #define CONFIG_SYS_TIMER_COUNTER        \
  21         (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
  22
  23 #define CONFIG_DISPLAY_CPUINFO
  24 #define CONFIG_DISPLAY_BOARDINFO
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29
  30 #define CONFIG_MACH_TYPE        MACH_TYPE_MX25_3DS
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  34
  35 /* Physical Memory Map */
  36
  37 #define CONFIG_NR_DRAM_BANKS    1
  38 #define PHYS_SDRAM_1            0x80000000
  39 #define PHYS_SDRAM_1_SIZE       (64 * 1024 * 1024)
  40
  41 #define CONFIG_BOARD_EARLY_INIT_F
  42 #define CONFIG_BOARD_LATE_INIT
  43
  44 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  45 #define CONFIG_SYS_INIT_RAM_ADDR        IMX_RAM_BASE
  46 #define CONFIG_SYS_INIT_RAM_SIZE        IMX_RAM_SIZE
  47
  48 #define CONFIG_SYS_INIT_SP_OFFSET \
  49         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  50 #define CONFIG_SYS_INIT_SP_ADDR \
  51         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  52
  53 /* Memory Test */
  54 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
  55 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
  56
  57 /* Serial Info */
  58 #define CONFIG_MXC_UART
  59 #define CONFIG_MXC_UART_BASE    UART1_BASE
  60 #define CONFIG_CONS_INDEX       1       /* use UART0 for console */
  61 #define CONFIG_BAUDRATE         115200  /* Default baud rate */
  62
  63 /* No NOR flash present */
  64 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
  65 #define CONFIG_ENV_SIZE        (8 * 1024)
  66 #define CONFIG_SYS_MMC_ENV_DEV          0
  67
  68 #define CONFIG_SYS_NO_FLASH
  69 #define CONFIG_ENV_IS_IN_MMC
  70 #define CONFIG_SYS_MMC_ENV_DEV 0
  71
  72 /* U-Boot general configuration */
  73 #define CONFIG_AUTO_COMPLETE
  74 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size  */
  75 /* Print buffer sz */
  76 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  77                 sizeof(CONFIG_SYS_PROMPT) + 16)
  78 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
  79 /* Boot Argument Buffer Size */
  80 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  81 #define CONFIG_CMDLINE_EDITING
  82 #define CONFIG_SYS_LONGHELP
  83
  84 /* U-Boot commands */
  85 #define CONFIG_OF_LIBFDT
  86 #define CONFIG_CMD_BOOTZ
  87 #define CONFIG_CMD_CACHE
  88 #define CONFIG_CMD_MMC
  89 #define CONFIG_CMD_EXT2
  90 #define CONFIG_CMD_FAT
  91
  92 /* Ethernet */
  93 #define CONFIG_FEC_MXC
  94 #define CONFIG_FEC_MXC_PHYADDR          0x1f
  95 #define CONFIG_MII
  96 #define CONFIG_ENV_OVERWRITE
  97
  98 /* ESDHC driver */
  99 #define CONFIG_MMC
 100 #define CONFIG_GENERIC_MMC
 101 #define CONFIG_FSL_ESDHC
 102 #define CONFIG_SYS_FSL_ESDHC_ADDR       IMX_MMC_SDHC1_BASE
 103 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 104
 105 /* PMIC Configs */
 106 #define CONFIG_POWER
 107 #define CONFIG_POWER_I2C
 108 #define CONFIG_POWER_FSL
 109 #define CONFIG_POWER_FSL_MC34704
 110 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x54
 111
 112 #define CONFIG_DOS_PARTITION
 113
 114 /* I2C Configs */
 115 #define CONFIG_CMD_I2C
 116 #define CONFIG_SYS_I2C
 117 #define CONFIG_SYS_I2C_MXC
 118 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 119 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 120
 121 /* RTC */
 122 #define CONFIG_RTC_IMXDI
 123 #define CONFIG_CMD_DATE
 124
 125 /* Ethernet Configs */
 126
 127 #define CONFIG_CMD_PING
 128 #define CONFIG_CMD_DHCP
 129 #define CONFIG_CMD_MII
 130
 131 #define CONFIG_BOOTDELAY        1
 132
 133 #define CONFIG_LOADADDR         0x81000000      /* loadaddr env var */
 134 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 135
 136 #define CONFIG_DEFAULT_FDT_FILE         "imx25-pdk.dtb"
 137
 138 #define CONFIG_EXTRA_ENV_SETTINGS \
 139         "script=boot.scr\0" \
 140         "image=zImage\0" \
 141         "console=ttymxc0\0" \
 142         "splashpos=m,m\0" \
 143         "fdt_high=0xffffffff\0" \
 144         "initrd_high=0xffffffff\0" \
 145         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 146         "fdt_addr=0x82000000\0" \
 147         "boot_fdt=try\0" \
 148         "ip_dyn=yes\0" \
 149         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 150         "mmcpart=1\0" \
 151         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 152         "update_sd_firmware_filename=u-boot.imx\0" \
 153         "update_sd_firmware=" \
 154                 "if test ${ip_dyn} = yes; then " \
 155                         "setenv get_cmd dhcp; " \
 156                 "else " \
 157                         "setenv get_cmd tftp; " \
 158                 "fi; " \
 159                 "if mmc dev ${mmcdev}; then "   \
 160                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 161                                 "setexpr fw_sz ${filesize} / 0x200; " \
 162                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 163                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 164                         "fi; "  \
 165                 "fi\0" \
 166         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 167                 "root=${mmcroot}\0" \
 168         "loadbootscript=" \
 169                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 170         "bootscript=echo Running bootscript from mmc ...; " \
 171                 "source\0" \
 172         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 173         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 174         "mmcboot=echo Booting from mmc ...; " \
 175                 "run mmcargs; " \
 176                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 177                         "if run loadfdt; then " \
 178                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 179                         "else " \
 180                                 "if test ${boot_fdt} = try; then " \
 181                                         "bootz; " \
 182                                 "else " \
 183                                         "echo WARN: Cannot load the DT; " \
 184                                 "fi; " \
 185                         "fi; " \
 186                 "else " \
 187                         "bootz; " \
 188                 "fi;\0" \
 189         "netargs=setenv bootargs console=${console},${baudrate} " \
 190                 "root=/dev/nfs " \
 191         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 192                 "netboot=echo Booting from net ...; " \
 193                 "run netargs; " \
 194                 "if test ${ip_dyn} = yes; then " \
 195                         "setenv get_cmd dhcp; " \
 196                 "else " \
 197                         "setenv get_cmd tftp; " \
 198                 "fi; " \
 199                 "${get_cmd} ${image}; " \
 200                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 201                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 202                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 203                         "else " \
 204                                 "if test ${boot_fdt} = try; then " \
 205                                         "bootz; " \
 206                                 "else " \
 207                                         "echo WARN: Cannot load the DT; " \
 208                                 "fi; " \
 209                         "fi; " \
 210                 "else " \
 211                         "bootz; " \
 212                 "fi;\0"
 213
 214 #define CONFIG_BOOTCOMMAND \
 215            "mmc dev ${mmcdev}; if mmc rescan; then " \
 216                    "if run loadbootscript; then " \
 217                            "run bootscript; " \
 218                    "else " \
 219                            "if run loadimage; then " \
 220                                    "run mmcboot; " \
 221                            "else run netboot; " \
 222                            "fi; " \
 223                    "fi; " \
 224            "else run netboot; fi"
 225
 226 /* Miscellaneous configurable options */
 227 #define CONFIG_SYS_LONGHELP
 228 #define CONFIG_SYS_HUSH_PARSER
 229 #define CONFIG_AUTO_COMPLETE
 230
 231 #define CONFIG_SYS_MAXARGS             16
 232 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 233
 234 #endif /* __CONFIG_H */