include/configs/mcx.h

   1 /*
   2  * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
   3  *
   4  * Based on omap3_evm_config.h
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Configuration Options
  14  */
  15 #define CONFIG_OMAP                     /* in a TI OMAP core */
  16 #define CONFIG_OMAP3_MCX                /* working with mcx */
  17 #define CONFIG_OMAP_GPIO
  18 /* Common ARM Erratas */
  19 #define CONFIG_ARM_ERRATA_454179
  20 #define CONFIG_ARM_ERRATA_430973
  21 #define CONFIG_ARM_ERRATA_621766
  22
  23 #define MACH_TYPE_MCX                   3656
  24 #define CONFIG_MACH_TYPE        MACH_TYPE_MCX
  25
  26 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  27
  28 #include <asm/arch/cpu.h>               /* get chip and board defs */
  29 #include <asm/arch/omap.h>
  30
  31 /*
  32  * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
  33  * and older u-boot.bin with the new U-Boot SPL.
  34  */
  35 #define CONFIG_SYS_TEXT_BASE            0x80008000
  36
  37 /* Clock Defines */
  38 #define V_OSCK                  26000000        /* Clock output from T2 */
  39 #define V_SCLK                  (V_OSCK >> 1)
  40
  41 #define CONFIG_MISC_INIT_R
  42
  43 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  44 #define CONFIG_SETUP_MEMORY_TAGS
  45 #define CONFIG_INITRD_TAG
  46 #define CONFIG_REVISION_TAG
  47
  48 /*
  49  * Size of malloc() pool
  50  */
  51 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  52 #define CONFIG_SYS_MALLOC_LEN           (1024 << 10)
  53 /*
  54  * DDR related
  55  */
  56 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  57
  58 /*
  59  * Hardware drivers
  60  */
  61
  62 /*
  63  * NS16550 Configuration
  64  */
  65 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  66
  67 #define CONFIG_SYS_NS16550_SERIAL
  68 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  69 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  70
  71 /*
  72  * select serial console configuration
  73  */
  74 #define CONFIG_CONS_INDEX               3
  75 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  76 #define CONFIG_SERIAL3                  3       /* UART3 */
  77
  78 /* allow to overwrite serial and ethaddr */
  79 #define CONFIG_ENV_OVERWRITE
  80 #define CONFIG_BAUDRATE                 115200
  81 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  82                                         115200}
  83 #define CONFIG_GENERIC_MMC
  84 #define CONFIG_DOS_PARTITION
  85
  86 /* EHCI */
  87 #define CONFIG_OMAP3_GPIO_2
  88 #define CONFIG_OMAP3_GPIO_5
  89 #define CONFIG_USB_EHCI
  90 #define CONFIG_USB_EHCI_OMAP
  91 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        57
  92 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
  93 #define CONFIG_USB_HOST_ETHER
  94 #define CONFIG_USB_ETHER_ASIX
  95 #define CONFIG_USB_ETHER_MCS7830
  96
  97 /* commands to include */
  98 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
  99
 100 #define CONFIG_CMD_DATE
 101 #define CONFIG_CMD_NAND         /* NAND support                 */
 102 #define CONFIG_CMD_UBIFS
 103 #define CONFIG_RBTREE
 104 #define CONFIG_LZO
 105 #define CONFIG_MTD_PARTITIONS
 106 #define CONFIG_MTD_DEVICE
 107 #define CONFIG_CMD_MTDPARTS
 108
 109 #define CONFIG_SYS_NO_FLASH
 110 #define CONFIG_SYS_I2C
 111 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 112 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 113 #define CONFIG_SYS_I2C_OMAP34XX
 114
 115 /* RTC */
 116 #define CONFIG_RTC_DS1337
 117 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 118
 119 /*
 120  * Board NAND Info.
 121  */
 122 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 123                                                         /* to access nand */
 124 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 125                                                         /* to access */
 126                                                         /* nand at CS0 */
 127
 128 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 129                                                         /* NAND devices */
 130 #define CONFIG_JFFS2_NAND
 131 /* nand device jffs2 lives on */
 132 #define CONFIG_JFFS2_DEV                "nand0"
 133 /* start of jffs2 partition */
 134 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 135 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
 136
 137 /* Environment information */
 138
 139 #define CONFIG_BOOTFILE         "uImage"
 140
 141 /* Setup MTD for NAND on the SOM */
 142 #define MTDIDS_DEFAULT          "nand0=omap2-nand.0"
 143 #define MTDPARTS_DEFAULT        "mtdparts=omap2-nand.0:512k(MLO),"      \
 144                                 "1m(u-boot),256k(env1),"                \
 145                                 "256k(env2),6m(kernel),6m(k_recovery)," \
 146                                 "8m(fs_recovery),-(common_data)"
 147
 148 #define CONFIG_HOSTNAME mcx
 149 #define CONFIG_EXTRA_ENV_SETTINGS \
 150         "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0"       \
 151         "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0"     \
 152         "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"       \
 153         "addfb=setenv bootargs ${bootargs} vram=6M "                    \
 154                 "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0"     \
 155         "addip_sta=setenv bootargs ${bootargs} "                        \
 156                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 157                 "${netmask}:${hostname}:eth0:off\0"                     \
 158         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 159         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 160                 "else run addip_sta;fi\0"                               \
 161         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 162         "addtty=setenv bootargs ${bootargs} "                           \
 163                 "console=${consoledev},${baudrate}\0"                   \
 164         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 165         "baudrate=115200\0"                                             \
 166         "consoledev=ttyO2\0"                                            \
 167         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 168         "loadaddr=0x82000000\0"                                         \
 169         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 170         "load_k=tftp ${loadaddr} ${bootfile}\0"                         \
 171         "loaduimage=fatload mmc 0 ${loadaddr} uImage\0"                 \
 172         "loadmlo=tftp ${loadaddr} ${mlo}\0"                             \
 173         "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0"                    \
 174         "mmcargs=root=/dev/mmcblk0p2 rw "                               \
 175                 "rootfstype=ext3 rootwait\0"                            \
 176         "mmcboot=echo Booting from mmc ...; "                           \
 177                 "run mmcargs; "                                         \
 178                 "run addip addtty addmtd addfb addeth addmisc;"         \
 179                 "run loaduimage; "                                      \
 180                 "bootm ${loadaddr}\0"                                   \
 181         "net_nfs=run load_k; "                                          \
 182                 "run nfsargs; "                                         \
 183                 "run addip addtty addmtd addfb addeth addmisc;"         \
 184                 "bootm ${loadaddr}\0"                                   \
 185         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 186                 "nfsroot=${serverip}:${rootpath}\0"                     \
 187         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0"          \
 188         "uboot_addr=0x80000\0"                                          \
 189         "update=nandecc sw;nand erase ${uboot_addr} 100000;"            \
 190                 "nand write ${loadaddr} ${uboot_addr} 80000\0"          \
 191         "updatemlo=nandecc hw;nand erase 0 20000;"                      \
 192                 "nand write ${loadaddr} 0 20000\0"                      \
 193         "upd=if run load;then echo Updating u-boot;if run update;"      \
 194                 "then echo U-Boot updated;"                             \
 195                         "else echo Error updating u-boot !;"            \
 196                         "echo Board without bootloader !!;"             \
 197                 "fi;"                                                   \
 198                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 199         "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0"           \
 200         "bootscript=echo Running bootscript from mmc ...; "             \
 201                 "source ${loadaddr}\0"                                  \
 202         "nandargs=setenv bootargs ubi.mtd=7 "                           \
 203                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 204         "nandboot=echo Booting from nand ...; "                         \
 205                 "run nandargs; "                                        \
 206                 "ubi part nand0,4;"                                     \
 207                 "ubi readvol ${loadaddr} kernel;"                       \
 208                 "run addtty addmtd addfb addeth addmisc;"               \
 209                 "bootm ${loadaddr}\0"                                   \
 210         "preboot=ubi part nand0,7;"                                     \
 211                 "ubi readvol ${loadaddr} splash;"                       \
 212                 "bmp display ${loadaddr};"                              \
 213                 "gpio set 55\0"                                         \
 214         "swupdate_args=setenv bootargs root=/dev/ram "                  \
 215                 "quiet loglevel=1 "                                     \
 216                 "consoleblank=0 ${swupdate_misc}\0"                     \
 217         "swupdate=echo Running Sw-Update...;"                           \
 218                 "if printenv mtdparts;then echo Starting SwUpdate...; " \
 219                 "else mtdparts default;fi; "                            \
 220                 "ubi part nand0,5;"                                     \
 221                 "ubi readvol 0x82000000 kernel_recovery;"               \
 222                 "ubi part nand0,6;"                                     \
 223                 "ubi readvol 0x84000000 fs_recovery;"                   \
 224                 "run swupdate_args; "                                   \
 225                 "setenv bootargs ${bootargs} "                          \
 226                         "${mtdparts} "                                  \
 227                         "vram=6M omapfb.vram=1:2M,2:2M,3:2M "           \
 228                         "omapdss.def_disp=lcd;"                         \
 229                 "bootm 0x82000000 0x84000000\0"                         \
 230         "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \
 231                 "then source 82000000;else run nandboot;fi\0"
 232
 233 #define CONFIG_AUTO_COMPLETE
 234 #define CONFIG_CMDLINE_EDITING
 235
 236 /*
 237  * Miscellaneous configurable options
 238  */
 239 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 240 #define CONFIG_SYS_CBSIZE               1024/* Console I/O Buffer Size */
 241 /* Print Buffer Size */
 242 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 243                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 244 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
 245                                                 /* args */
 246 /* Boot Argument Buffer Size */
 247 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 248 /* memtest works on */
 249 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 250 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 251                                         0x01F00000) /* 31MB */
 252
 253 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 254                                                                 /* address */
 255 #define CONFIG_PREBOOT
 256
 257 /*
 258  * AM3517 has 12 GP timers, they can be driven by the system clock
 259  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 260  * This rate is divided by a local divisor.
 261  */
 262 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 263 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 264
 265 /*
 266  * Physical Memory Map
 267  */
 268 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 269 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 270 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 271
 272 /*
 273  * FLASH and environment organization
 274  */
 275
 276 /* **** PISMO SUPPORT *** */
 277 #define CONFIG_NAND
 278 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 279 #define CONFIG_NAND_OMAP_GPMC
 280 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 281 #define CONFIG_ENV_IS_IN_NAND
 282 #define SMNAND_ENV_OFFSET               0x180000 /* environment starts here */
 283
 284 /* Redundant Environment */
 285 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 286 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 287 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 288 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 289                                                 2 * CONFIG_SYS_ENV_SECT_SIZE)
 290 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 291
 292 /* Flash banks JFFS2 should use */
 293 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 294                                         CONFIG_SYS_MAX_NAND_DEVICE)
 295 #define CONFIG_SYS_JFFS2_MEM_NAND
 296 /* use flash_info[2] */
 297 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 298 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 299
 300 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 301 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 302 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 303 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 304                                          CONFIG_SYS_INIT_RAM_SIZE - \
 305                                          GENERATED_GBL_DATA_SIZE)
 306
 307 /* Defines for SPL */
 308 #define CONFIG_SPL_FRAMEWORK
 309 #define CONFIG_SPL_BOARD_INIT
 310 #define CONFIG_SPL_NAND_SIMPLE
 311
 312 #define CONFIG_SPL_NAND_BASE
 313 #define CONFIG_SPL_NAND_DRIVERS
 314 #define CONFIG_SPL_NAND_ECC
 315 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 316
 317 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
 318 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)     /* 8 KB for stack */
 319 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 320
 321 /* move malloc and bss high to prevent clashing with the main image */
 322 #define CONFIG_SYS_SPL_MALLOC_START     0x8f000000
 323 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 324 #define CONFIG_SPL_BSS_START_ADDR       0x8f080000 /* end of RAM */
 325 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 326
 327 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 328 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 329
 330 /* NAND boot config */
 331 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 332 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 333 #define CONFIG_SYS_NAND_OOBSIZE         64
 334 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 335 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 336 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 337 #define CONFIG_SYS_NAND_ECCPOS          {40, 41, 42, 43, 44, 45, 46, 47,\
 338                                          48, 49, 50, 51, 52, 53, 54, 55,\
 339                                          56, 57, 58, 59, 60, 61, 62, 63}
 340 #define CONFIG_SYS_NAND_ECCSIZE         256
 341 #define CONFIG_SYS_NAND_ECCBYTES        3
 342 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
 343 #define CONFIG_SPL_NAND_SOFTECC
 344
 345 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 346
 347 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 348
 349 /*
 350  * ethernet support
 351  *
 352  */
 353 #if defined(CONFIG_CMD_NET)
 354 #define CONFIG_DRIVER_TI_EMAC
 355 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 356 #define CONFIG_MII
 357 #define CONFIG_BOOTP_DNS
 358 #define CONFIG_BOOTP_DNS2
 359 #define CONFIG_BOOTP_SEND_HOSTNAME
 360 #define CONFIG_NET_RETRY_COUNT 10
 361 #endif
 362
 363 #define CONFIG_SPLASH_SCREEN
 364 #define CONFIG_VIDEO_BMP_RLE8
 365 #define CONFIG_CMD_BMP
 366 #define CONFIG_VIDEO_OMAP3
 367
 368 #endif /* __CONFIG_H */