include/configs/lsxl.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2012 Michael Walle
   4  * Michael Walle <michael@walle.cc>
   5  */
   6
   7 #ifndef _CONFIG_LSXL_H
   8 #define _CONFIG_LSXL_H
   9
  10 /*
  11  * Version number information
  12  */
  13 #if defined(CONFIG_LSCHLV2)
  14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  15 #define CONFIG_MACH_TYPE 3006
  16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  17 #elif defined(CONFIG_LSXHL)
  18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  19 #define CONFIG_MACH_TYPE 2663
  20 /* CONFIG_SYS_TCLK is 200000000 by default */
  21 #else
  22 #error "unknown board"
  23 #endif
  24
  25 /*
  26  * General configuration options
  27  */
  28 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  29 #define CONFIG_KW88F6281                /* SOC Name */
  30
  31 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  32 #define CONFIG_SHOW_BOOT_PROGRESS
  33
  34 #define CONFIG_KIRKWOOD_GPIO
  35
  36 /*
  37  * Commands configuration
  38  */
  39
  40 /*
  41  * mv-common.h should be defined after CMD configs since it used them
  42  * to enable certain macros
  43  */
  44 #include "mv-common.h"
  45
  46 /* loading initramfs images without uimage header */
  47
  48 /* ST M25P40 */
  49 #undef CONFIG_ENV_SPI_MAX_HZ
  50 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  51
  52 /*
  53  *  Environment variables configurations
  54  */
  55 #ifdef CONFIG_SPI_FLASH
  56 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  57 #define CONFIG_SYS_MAX_FLASH_SECT       8
  58 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  59 #endif
  60
  61 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
  62 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
  63
  64 /*
  65  * Default environment variables
  66  */
  67 #define CONFIG_LOADADDR         0x00800000
  68
  69 #if defined(CONFIG_LSXHL)
  70 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  71 #elif defined(CONFIG_LSCHLV2)
  72 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  73 #else
  74 #error "Unsupported board"
  75 #endif
  76
  77 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  78         "bootsource=legacy\0"                                           \
  79         "hdpart=0:1\0"                                                  \
  80         "kernel_addr=0x00800000\0"                                      \
  81         "ramdisk_addr=0x01000000\0"                                     \
  82         "fdt_addr=0x00ff0000\0"                                         \
  83         "bootcmd_legacy=ide reset "                                     \
  84                 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
  85                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
  86                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
  87         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
  88                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
  89                 "&& setenv ramdisk_len ${filesize} "                    \
  90                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
  91                 "&& bootz ${kernel_addr} "                              \
  92                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  93         "bootcmd_hdd=ide reset "                                        \
  94                 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
  95                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
  96                 "&& setenv ramdisk_len ${filesize} "                    \
  97                 "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
  98                 "&& bootz ${kernel_addr} "                              \
  99                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 100         "bootcmd_usb=usb start "                                        \
 101                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
 102                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
 103                 "&& setenv ramdisk_len ${filesize} "                    \
 104                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 105                 "&& bootz ${kernel_addr} "                              \
 106                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 107         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 108         "eraseenv=sf probe 0 "                                          \
 109                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 110                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 111         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 112                 "setenv autoload no "                                   \
 113                 "&& bootp "                                             \
 114                 "&& setenv ncip "                                       \
 115                 "&& setenv autoload ${autoload_old}; "                  \
 116                 "setenv autoload_old\0"                                 \
 117         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 118                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 119                 "setenv bootfile; setenv dnsip; "                       \
 120                 "setenv bootsource legacy; run ser\0"                   \
 121         "restore_env=run standard_env; saveenv; reset\0"                \
 122         "ser=setenv stdin serial; setenv stdout serial; "               \
 123                 "setenv stderr serial\0"                                \
 124         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 125         "stdin=serial\0"                                                \
 126         "stdout=serial\0"                                               \
 127         "stderr=serial\0"
 128
 129 /*
 130  * Ethernet Driver configuration
 131  */
 132 #ifdef CONFIG_CMD_NET
 133 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 134 #define CONFIG_PHY_BASE_ADR             7
 135 #undef CONFIG_RESET_PHY_R
 136 #endif /* CONFIG_CMD_NET */
 137
 138 #ifdef CONFIG_IDE
 139 #undef CONFIG_SYS_IDE_MAXBUS
 140 #define CONFIG_SYS_IDE_MAXBUS           1
 141 #undef CONFIG_SYS_IDE_MAXDEVICE
 142 #define CONFIG_SYS_IDE_MAXDEVICE        1
 143 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 144 #define CONFIG_SYS_64BIT_LBA
 145 #endif
 146
 147 #endif /* _CONFIG_LSXL_H */