include/configs/lsxl.h

   1 /*
   2  * Copyright (c) 2012 Michael Walle
   3  * Michael Walle <michael@walle.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_LSXL_H
   9 #define _CONFIG_LSXL_H
  10
  11
  12 /*
  13  * Version number information
  14  */
  15 #if defined(CONFIG_LSCHLV2)
  16 #define CONFIG_IDENT_STRING " LS-CHLv2"
  17 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  18 #define CONFIG_MACH_TYPE 3006
  19 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  20 #elif defined(CONFIG_LSXHL)
  21 #define CONFIG_IDENT_STRING " LS-XHL"
  22 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  23 #define CONFIG_MACH_TYPE 2663
  24 /* CONFIG_SYS_TCLK is 200000000 by default */
  25 #else
  26 #error "unknown board"
  27 #endif
  28
  29 /*
  30  * General configuration options
  31  */
  32 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  33 #define CONFIG_KW88F6281                /* SOC Name */
  34
  35 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  36 #define CONFIG_MISC_INIT_R
  37 #define CONFIG_SHOW_BOOT_PROGRESS
  38
  39 #define CONFIG_KIRKWOOD_GPIO
  40 #define CONFIG_OF_LIBFDT
  41
  42 #define CONFIG_SYS_NO_FLASH
  43 #define CONFIG_SYS_HUSH_PARSER
  44 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  45 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  46
  47 /*
  48  * Enable u-boot API for standalone programs.
  49  */
  50 #define CONFIG_API
  51
  52 /*
  53  * Commands configuration
  54  */
  55 #define CONFIG_CMD_BOOTZ
  56 #define CONFIG_CMD_DHCP
  57 #define CONFIG_CMD_ENV
  58 #define CONFIG_CMD_EXT2
  59 #define CONFIG_CMD_FAT
  60 #define CONFIG_CMD_IDE
  61 #define CONFIG_CMD_PING
  62 #define CONFIG_CMD_PING
  63 #define CONFIG_CMD_SF
  64 #define CONFIG_CMD_SPI
  65 #define CONFIG_CMD_USB
  66 #define CONFIG_CMD_FS_GENERIC
  67
  68 #define CONFIG_DOS_PARTITION
  69 #define CONFIG_EFI_PARTITION
  70
  71 /*
  72  * mv-common.h should be defined after CMD configs since it used them
  73  * to enable certain macros
  74  */
  75 #include "mv-common.h"
  76
  77 /* loading initramfs images without uimage header */
  78 #define CONFIG_SUPPORT_RAW_INITRD
  79
  80 /* ST M25P40 */
  81 #undef CONFIG_SPI_FLASH_MACRONIX
  82 #define CONFIG_SPI_FLASH_STMICRO
  83 #undef CONFIG_ENV_SPI_MAX_HZ
  84 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  85 #undef CONFIG_SF_DEFAULT_SPEED
  86 #define CONFIG_SF_DEFAULT_SPEED         25000000
  87
  88
  89 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  90
  91 /*
  92  *  Environment variables configurations
  93  */
  94 #ifdef CONFIG_SPI_FLASH
  95 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  96 #define CONFIG_SYS_MAX_FLASH_SECT       8
  97 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  98 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  99 #else
 100 #define CONFIG_ENV_IS_NOWHERE
 101 #endif
 102
 103 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
 104 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 105
 106 /*
 107  * Default environment variables
 108  */
 109 #define CONFIG_LOADADDR         0x00800000
 110 #define CONFIG_BOOTCOMMAND      "run bootcmd_${bootsource}"
 111 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/sda2"
 112
 113 #if defined(CONFIG_LSXHL)
 114 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
 115 #elif defined(CONFIG_LSCHLV2)
 116 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
 117 #else
 118 #error "Unsupported board"
 119 #endif
 120
 121 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 122         "bootsource=legacy\0"                                           \
 123         "hdpart=0:1\0"                                                  \
 124         "kernel_addr=0x00800000\0"                                      \
 125         "ramdisk_addr=0x01000000\0"                                     \
 126         "fdt_addr=0x00ff0000\0"                                         \
 127         "bootcmd_legacy=ide reset "                                     \
 128                 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
 129                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
 130                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
 131         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
 132                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
 133                 "&& setenv ramdisk_len ${filesize} "                    \
 134                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
 135                 "&& bootz ${kernel_addr} "                              \
 136                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 137         "bootcmd_hdd=ide reset "                                        \
 138                 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
 139                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
 140                 "&& setenv ramdisk_len ${filesize} "                    \
 141                 "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
 142                 "&& bootz ${kernel_addr} "                              \
 143                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 144         "bootcmd_usb=usb start "                                        \
 145                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
 146                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
 147                 "&& setenv ramdisk_len ${filesize} "                    \
 148                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 149                 "&& bootz ${kernel_addr} "                              \
 150                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 151         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 152         "eraseenv=sf probe 0 "                                          \
 153                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 154                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 155         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 156                 "setenv autoload no "                                   \
 157                 "&& bootp "                                             \
 158                 "&& setenv ncip "                                       \
 159                 "&& setenv autoload ${autoload_old}; "                  \
 160                 "setenv autoload_old\0"                                 \
 161         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 162                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 163                 "setenv bootfile; setenv dnsip; "                       \
 164                 "setenv bootsource legacy; run ser\0"                   \
 165         "restore_env=run standard_env; saveenv; reset\0"                \
 166         "ser=setenv stdin serial; setenv stdout serial; "               \
 167                 "setenv stderr serial\0"                                \
 168         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 169         "stdin=serial\0"                                                \
 170         "stdout=serial\0"                                               \
 171         "stderr=serial\0"
 172
 173 /*
 174  * Ethernet Driver configuration
 175  */
 176 #ifdef CONFIG_CMD_NET
 177 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 178 #define CONFIG_PHY_BASE_ADR             7
 179 #undef CONFIG_RESET_PHY_R
 180 #endif /* CONFIG_CMD_NET */
 181
 182 #ifdef CONFIG_CMD_IDE
 183 #undef CONFIG_IDE_LED
 184 #undef CONFIG_SYS_IDE_MAXBUS
 185 #define CONFIG_SYS_IDE_MAXBUS           1
 186 #undef CONFIG_SYS_IDE_MAXDEVICE
 187 #define CONFIG_SYS_IDE_MAXDEVICE        1
 188 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 189 #define CONFIG_SYS_64BIT_LBA
 190 #endif
 191
 192 #endif /* _CONFIG_LSXL_H */