include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #define CONFIG_ARMV7_PSCI_1_0
  10
  11 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  12
  13 #define CONFIG_SYS_FSL_CLK
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT
  16 #define CONFIG_DEEP_SLEEP
  17
  18 /*
  19  * Size of malloc() pool
  20  */
  21 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  22
  23 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  24 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  25
  26 #define CONFIG_SYS_CLK_FREQ             100000000
  27 #define CONFIG_DDR_CLK_FREQ             100000000
  28
  29 #define DDR_SDRAM_CFG                   0x470c0008
  30 #define DDR_CS0_BNDS                    0x008000bf
  31 #define DDR_CS0_CONFIG                  0x80014302
  32 #define DDR_TIMING_CFG_0                0x50550004
  33 #define DDR_TIMING_CFG_1                0xbcb38c56
  34 #define DDR_TIMING_CFG_2                0x0040d120
  35 #define DDR_TIMING_CFG_3                0x010e1000
  36 #define DDR_TIMING_CFG_4                0x00000001
  37 #define DDR_TIMING_CFG_5                0x03401400
  38 #define DDR_SDRAM_CFG_2                 0x00401010
  39 #define DDR_SDRAM_MODE                  0x00061c60
  40 #define DDR_SDRAM_MODE_2                0x00180000
  41 #define DDR_SDRAM_INTERVAL              0x18600618
  42 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  43 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  44 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  45 #define DDR_DDR_CDR1                    0x80040000
  46 #define DDR_DDR_CDR2                    0x00000001
  47 #define DDR_SDRAM_CLK_CNTL              0x02000000
  48 #define DDR_DDR_ZQ_CNTL                 0x89080600
  49 #define DDR_CS0_CONFIG_2                0
  50 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  51 #define SDRAM_CFG2_D_INIT               0x00000010
  52 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  53 #define SDRAM_CFG2_FRC_SR               0x80000000
  54 #define SDRAM_CFG_BI                    0x00000001
  55
  56 #ifdef CONFIG_RAMBOOT_PBL
  57 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  58 #endif
  59
  60 #ifdef CONFIG_SD_BOOT
  61 #ifdef CONFIG_SD_BOOT_QSPI
  62 #define CONFIG_SYS_FSL_PBL_RCW  \
  63         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  64 #else
  65 #define CONFIG_SYS_FSL_PBL_RCW  \
  66         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
  67 #endif
  68
  69 #ifdef CONFIG_SECURE_BOOT
  70 /*
  71  * HDR would be appended at end of image and copied to DDR along
  72  * with U-Boot image.
  73  */
  74 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  75 #endif /* ifdef CONFIG_SECURE_BOOT */
  76
  77 #define CONFIG_SPL_MAX_SIZE             0x1a000
  78 #define CONFIG_SPL_STACK                0x1001d000
  79 #define CONFIG_SPL_PAD_TO               0x1c000
  80
  81 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  82                 CONFIG_SYS_MONITOR_LEN)
  83 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  84 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  85 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  86
  87 #ifdef CONFIG_U_BOOT_HDR_SIZE
  88 /*
  89  * HDR would be appended at end of image and copied to DDR along
  90  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  91  * size increases then increase this size in case of secure boot as
  92  * it uses raw u-boot image instead of fit image.
  93  */
  94 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  95 #else
  96 #define CONFIG_SYS_MONITOR_LEN          0x100000
  97 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  98 #endif
  99
 100 #define PHYS_SDRAM                      0x80000000
 101 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 102
 103 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 104 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 105
 106 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 107
 108 /*
 109  * IFC Definitions
 110  */
 111 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 112 #define CONFIG_FSL_IFC
 113 #define CONFIG_SYS_FLASH_BASE           0x60000000
 114 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 115
 116 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 117 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 118                                 CSPR_PORT_SIZE_16 | \
 119                                 CSPR_MSEL_NOR | \
 120                                 CSPR_V)
 121 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 122
 123 /* NOR Flash Timing Params */
 124 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 125                                         CSOR_NOR_TRHZ_80)
 126 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 127                                         FTIM0_NOR_TEADC(0x5) | \
 128                                         FTIM0_NOR_TAVDS(0x0) | \
 129                                         FTIM0_NOR_TEAHC(0x5))
 130 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 131                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 132                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 133 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 134                                         FTIM2_NOR_TCH(0x4) | \
 135                                         FTIM2_NOR_TWP(0x1c) | \
 136                                         FTIM2_NOR_TWPH(0x0e))
 137 #define CONFIG_SYS_NOR_FTIM3            0
 138
 139 #define CONFIG_SYS_FLASH_QUIET_TEST
 140 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 141
 142 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 143 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 144 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 145 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 146
 147 #define CONFIG_SYS_FLASH_EMPTY_INFO
 148 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 149
 150 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 151 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 152 #endif
 153
 154 /* CPLD */
 155
 156 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 157 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 158
 159 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 160 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 161                                         CSPR_PORT_SIZE_8 | \
 162                                         CSPR_MSEL_GPCM | \
 163                                         CSPR_V)
 164 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 165 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 166                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 167                                         CSOR_NOR_TRHZ_80)
 168
 169 /* CPLD Timing parameters for IFC GPCM */
 170 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 171                                         FTIM0_GPCM_TEADC(0xf) | \
 172                                         FTIM0_GPCM_TEAHC(0xf))
 173 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 174                                         FTIM1_GPCM_TRAD(0x3f))
 175 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 176                                         FTIM2_GPCM_TCH(0xf) | \
 177                                         FTIM2_GPCM_TWP(0xff))
 178 #define CONFIG_SYS_FPGA_FTIM3           0x0
 179 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 180 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 181 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 182 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 183 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 184 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 185 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 186 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 187 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 188 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 189 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 190 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 191 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 192 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 193 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 194 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 195
 196 /*
 197  * Serial Port
 198  */
 199 #ifdef CONFIG_LPUART
 200 #define CONFIG_LPUART_32B_REG
 201 #else
 202 #define CONFIG_SYS_NS16550_SERIAL
 203 #ifndef CONFIG_DM_SERIAL
 204 #define CONFIG_SYS_NS16550_REG_SIZE     1
 205 #endif
 206 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 207 #endif
 208
 209 /*
 210  * I2C
 211  */
 212 #define CONFIG_SYS_I2C
 213 #define CONFIG_SYS_I2C_MXC
 214 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 215 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 216 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 217
 218 /* EEPROM */
 219 #define CONFIG_ID_EEPROM
 220 #define CONFIG_SYS_I2C_EEPROM_NXID
 221 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 222 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 224 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 225 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 226
 227 /*
 228  * MMC
 229  */
 230
 231 /* SPI */
 232 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 233 /* QSPI */
 234 #define QSPI0_AMBA_BASE                 0x40000000
 235 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 236 #define FSL_QSPI_FLASH_NUM              2
 237
 238 /* DSPI */
 239 #endif
 240
 241 /* DM SPI */
 242 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 243 #define CONFIG_DM_SPI_FLASH
 244 #endif
 245
 246 /*
 247  * Video
 248  */
 249 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 250 #define CONFIG_VIDEO_LOGO
 251 #define CONFIG_VIDEO_BMP_LOGO
 252
 253 #define CONFIG_FSL_DCU_SII9022A
 254 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 255 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 256 #endif
 257
 258 /*
 259  * eTSEC
 260  */
 261
 262 #ifdef CONFIG_TSEC_ENET
 263 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 264 #endif
 265
 266 /* PCIe */
 267 #define CONFIG_PCIE1            /* PCIE controller 1 */
 268 #define CONFIG_PCIE2            /* PCIE controller 2 */
 269
 270 #ifdef CONFIG_PCI
 271 #define CONFIG_PCI_SCAN_SHOW
 272 #endif
 273
 274 #define CONFIG_CMDLINE_TAG
 275
 276 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 277 #define CONFIG_LAYERSCAPE_NS_ACCESS
 278 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 279 #define COUNTER_FREQUENCY               12500000
 280
 281 #define CONFIG_HWCONFIG
 282 #define HWCONFIG_BUFFER_SIZE            256
 283
 284 #define CONFIG_FSL_DEVICE_DISABLE
 285
 286 #define BOOT_TARGET_DEVICES(func) \
 287         func(MMC, mmc, 0) \
 288         func(USB, usb, 0) \
 289         func(DHCP, dhcp, na)
 290 #include <config_distro_bootcmd.h>
 291
 292 #ifdef CONFIG_LPUART
 293 #define CONFIG_EXTRA_ENV_SETTINGS       \
 294         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 295         "initrd_high=0xffffffff\0"      \
 296         "fdt_high=0xffffffff\0"         \
 297         "fdt_addr=0x64f00000\0"         \
 298         "kernel_addr=0x65000000\0"      \
 299         "scriptaddr=0x80000000\0"       \
 300         "scripthdraddr=0x80080000\0"    \
 301         "fdtheader_addr_r=0x80100000\0" \
 302         "kernelheader_addr_r=0x80200000\0"      \
 303         "kernel_addr_r=0x81000000\0"    \
 304         "fdt_addr_r=0x90000000\0"       \
 305         "ramdisk_addr_r=0xa0000000\0"   \
 306         "load_addr=0xa0000000\0"        \
 307         "kernel_size=0x2800000\0"       \
 308         "kernel_addr_sd=0x8000\0"       \
 309         "kernel_size_sd=0x14000\0"      \
 310         BOOTENV                         \
 311         "boot_scripts=ls1021atwr_boot.scr\0"    \
 312         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 313                 "scan_dev_for_boot_part="       \
 314                         "part list ${devtype} ${devnum} devplist; "     \
 315                         "env exists devplist || setenv devplist 1; "    \
 316                         "for distro_bootpart in ${devplist}; do "       \
 317                         "if fstype ${devtype} "                         \
 318                                 "${devnum}:${distro_bootpart} "         \
 319                                 "bootfstype; then "                     \
 320                                 "run scan_dev_for_boot; "               \
 321                         "fi; "                  \
 322                 "done\0"                        \
 323         "scan_dev_for_boot="                              \
 324                 "echo Scanning ${devtype} "               \
 325                                 "${devnum}:${distro_bootpart}...; "  \
 326                 "for prefix in ${boot_prefixes}; do "     \
 327                         "run scan_dev_for_scripts; "      \
 328                 "done;"                                   \
 329                 "\0"                                      \
 330         "boot_a_script="                                  \
 331                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 332                         "${scriptaddr} ${prefix}${script}; "    \
 333                 "env exists secureboot && load ${devtype} "     \
 334                         "${devnum}:${distro_bootpart} "         \
 335                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 336                         "env exists secureboot "        \
 337                         "&& esbc_validate ${scripthdraddr};"    \
 338                 "source ${scriptaddr}\0"          \
 339         "installer=load mmc 0:2 $load_addr "    \
 340                 "/flex_installer_arm32.itb; "           \
 341                 "bootm $load_addr#ls1021atwr\0" \
 342         "qspi_bootcmd=echo Trying load from qspi..;"    \
 343                 "sf probe && sf read $load_addr "       \
 344                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 345         "nor_bootcmd=echo Trying load from nor..;"      \
 346                 "cp.b $kernel_addr $load_addr "         \
 347                 "$kernel_size && bootm $load_addr#$board\0"
 348 #else
 349 #define CONFIG_EXTRA_ENV_SETTINGS       \
 350         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 351         "initrd_high=0xffffffff\0"      \
 352         "fdt_high=0xffffffff\0"         \
 353         "fdt_addr=0x64f00000\0"         \
 354         "kernel_addr=0x61000000\0"      \
 355         "kernelheader_addr=0x60800000\0"        \
 356         "scriptaddr=0x80000000\0"       \
 357         "scripthdraddr=0x80080000\0"    \
 358         "fdtheader_addr_r=0x80100000\0" \
 359         "kernelheader_addr_r=0x80200000\0"      \
 360         "kernel_addr_r=0x81000000\0"    \
 361         "kernelheader_size=0x40000\0"   \
 362         "fdt_addr_r=0x90000000\0"       \
 363         "ramdisk_addr_r=0xa0000000\0"   \
 364         "load_addr=0xa0000000\0"        \
 365         "kernel_size=0x2800000\0"       \
 366         "kernel_addr_sd=0x8000\0"       \
 367         "kernel_size_sd=0x14000\0"      \
 368         "kernelhdr_addr_sd=0x4000\0"            \
 369         "kernelhdr_size_sd=0x10\0"              \
 370         BOOTENV                         \
 371         "boot_scripts=ls1021atwr_boot.scr\0"    \
 372         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 373                 "scan_dev_for_boot_part="       \
 374                         "part list ${devtype} ${devnum} devplist; "     \
 375                         "env exists devplist || setenv devplist 1; "    \
 376                         "for distro_bootpart in ${devplist}; do "       \
 377                         "if fstype ${devtype} "                         \
 378                                 "${devnum}:${distro_bootpart} "         \
 379                                 "bootfstype; then "                     \
 380                                 "run scan_dev_for_boot; "               \
 381                         "fi; "                  \
 382                 "done\0"                        \
 383         "scan_dev_for_boot="                              \
 384                 "echo Scanning ${devtype} "               \
 385                                 "${devnum}:${distro_bootpart}...; "  \
 386                 "for prefix in ${boot_prefixes}; do "     \
 387                         "run scan_dev_for_scripts; "      \
 388                 "done;"                                   \
 389                 "\0"                                      \
 390         "boot_a_script="                                  \
 391                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 392                         "${scriptaddr} ${prefix}${script}; "    \
 393                 "env exists secureboot && load ${devtype} "     \
 394                         "${devnum}:${distro_bootpart} "         \
 395                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 396                         "&& esbc_validate ${scripthdraddr};"    \
 397                 "source ${scriptaddr}\0"          \
 398         "qspi_bootcmd=echo Trying load from qspi..;"    \
 399                 "sf probe && sf read $load_addr "       \
 400                 "$kernel_addr $kernel_size; env exists secureboot "     \
 401                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 402                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 403                 "bootm $load_addr#$board\0" \
 404         "nor_bootcmd=echo Trying load from nor..;"      \
 405                 "cp.b $kernel_addr $load_addr "         \
 406                 "$kernel_size; env exists secureboot "  \
 407                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 408                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 409                 "bootm $load_addr#$board\0"     \
 410         "sd_bootcmd=echo Trying load from SD ..;"       \
 411                 "mmcinfo && mmc read $load_addr "       \
 412                 "$kernel_addr_sd $kernel_size_sd && "   \
 413                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 414                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 415                 " && esbc_validate ${kernelheader_addr_r};"     \
 416                 "bootm $load_addr#$board\0"
 417 #endif
 418
 419 #undef CONFIG_BOOTCOMMAND
 420 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 421 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 422                            "env exists secureboot && esbc_halt"
 423 #elif defined(CONFIG_SD_BOOT)
 424 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 425                            "env exists secureboot && esbc_halt;"
 426 #else
 427 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 428                            "env exists secureboot && esbc_halt;"
 429 #endif
 430
 431 /*
 432  * Miscellaneous configurable options
 433  */
 434
 435 #define CONFIG_SYS_MEMTEST_START        0x80000000
 436 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 437
 438 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 439
 440 #define CONFIG_LS102XA_STREAM_ID
 441
 442 #define CONFIG_SYS_INIT_SP_OFFSET \
 443         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 444 #define CONFIG_SYS_INIT_SP_ADDR \
 445         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 446
 447 #ifdef CONFIG_SPL_BUILD
 448 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 449 #else
 450 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 451 #endif
 452
 453 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 454
 455 /*
 456  * Environment
 457  */
 458 #define CONFIG_ENV_OVERWRITE
 459
 460 #if defined(CONFIG_SD_BOOT)
 461 #define CONFIG_ENV_OFFSET               0x300000
 462 #define CONFIG_SYS_MMC_ENV_DEV          0
 463 #define CONFIG_ENV_SIZE                 0x20000
 464 #elif defined(CONFIG_QSPI_BOOT)
 465 #define CONFIG_ENV_SIZE                 0x2000
 466 #define CONFIG_ENV_OFFSET               0x300000
 467 #define CONFIG_ENV_SECT_SIZE            0x10000
 468 #else
 469 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
 470 #define CONFIG_ENV_SIZE                 0x20000
 471 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 472 #endif
 473
 474 #include <asm/fsl_secure_boot.h>
 475 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 476
 477 #endif