Blackfin: Remove
[oweals/u-boot.git] / include / configs / grsim.h
1 /* Configuration header file for LEON3 GRSIM, trying to be similar
2  * to Gaisler's GR-XC3S-1500 board.
3  *
4  * (C) Copyright 2003-2005
5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6  *
7  * (C) Copyright 2007
8  * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_H__
14 #define __CONFIG_H__
15
16 /*
17  * High Level Configuration Options
18  * (easy to change)
19  *
20  * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
21  *
22  * TSIM command:
23  * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
24  *
25  * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
26  * hard-coded to these values and need not be specified. (see below)
27  *
28  * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
29  */
30
31 #define CONFIG_GRSIM            0       /* ... not running on GRSIM */
32 #define CONFIG_TSIM             1       /* ... running on TSIM */
33
34 /* CPU / AMBA BUS configuration */
35 #define CONFIG_SYS_CLK_FREQ     40000000        /* 40MHz */
36
37 /*
38  * Serial console configuration
39  */
40 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
41
42 /* Partitions */
43
44 /*
45  * Supported commands
46  */
47 #define CONFIG_CMD_DIAG
48 #define CONFIG_CMD_FPGA_LOADMK
49 #define CONFIG_CMD_IRQ
50 #define CONFIG_CMD_REGINFO
51
52 /*
53  * Autobooting
54  */
55
56 #define CONFIG_PREBOOT  "echo;" \
57         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
58         "echo"
59
60 #undef  CONFIG_BOOTARGS
61
62 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
63         "netdev=eth0\0"                                                 \
64         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
65                 "nfsroot=${serverip}:${rootpath}\0"                     \
66         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
67         "addip=setenv bootargs ${bootargs} "                            \
68                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
69                 ":${hostname}:${netdev}:off panic=1\0"                  \
70         "flash_nfs=run nfsargs addip;"                                  \
71                 "bootm ${kernel_addr}\0"                                \
72         "flash_self=run ramargs addip;"                                 \
73                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
74         "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"   \
75         "rootpath=/export/roofs\0"                                      \
76         "scratch=40000000\0"                                    \
77         "getkernel=tftpboot $(scratch) $(bootfile)\0" \
78         "bootargs=console=ttyS0,38400" \
79         ""
80 #define CONFIG_NETMASK 255.255.255.0
81 #define CONFIG_GATEWAYIP 192.168.0.1
82 #define CONFIG_SERVERIP 192.168.0.81
83 #define CONFIG_IPADDR 192.168.0.80
84 #define CONFIG_ROOTPATH "/export/rootfs"
85 #define CONFIG_HOSTNAME  grxc3s1500
86 #define CONFIG_BOOTFILE "/uImage"
87
88 #define CONFIG_BOOTCOMMAND      "run flash_self"
89
90 /* Memory MAP
91  *
92  *  Flash:
93  *  |--------------------------------|
94  *  | 0x00000000 Text & Data & BSS   | *
95  *  |            for Monitor         | *
96  *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
97  *  | UNUSED / Growth                | * 256kb
98  *  |--------------------------------|
99  *  | 0x00050000 Base custom area    | *
100  *  |            kernel / FS         | *
101  *  |                                | * Rest of Flash
102  *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
103  *  | END-0x00008000 Environment     | * 32kb
104  *  |--------------------------------|
105  *
106  *
107  *
108  *  Main Memory:
109  *  |--------------------------------|
110  *  | UNUSED / scratch area          |
111  *  |                                |
112  *  |                                |
113  *  |                                |
114  *  |                                |
115  *  |--------------------------------|
116  *  | Monitor .Text / .DATA / .BSS   | * 256kb
117  *  | Relocated!                     | *
118  *  |--------------------------------|
119  *  | Monitor Malloc                 | * 128kb (contains relocated environment)
120  *  |--------------------------------|
121  *  | Monitor/kernel STACK           | * 64kb
122  *  |--------------------------------|
123  *  | Page Table for MMU systems     | * 2k
124  *  |--------------------------------|
125  *  | PROM Code accessed from Linux  | * 6kb-128b
126  *  |--------------------------------|
127  *  | Global data (avail from kernel)| * 128b
128  *  |--------------------------------|
129  *
130  */
131
132 /*
133  * Flash configuration (8,16 or 32 MB)
134  * TEXT base always at 0xFFF00000
135  * ENV_ADDR always at  0xFFF40000
136  * FLASH_BASE at 0xFC000000 for 64 MB
137  *               0xFE000000 for 32 MB
138  *               0xFF000000 for 16 MB
139  *               0xFF800000 for  8 MB
140  */
141 #define CONFIG_SYS_FLASH_BASE           0x00000000
142 #define CONFIG_SYS_FLASH_SIZE           0x00800000
143 #define CONFIG_ENV_SIZE         0x8000
144
145 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
146
147 #define PHYS_FLASH_SECT_SIZE    0x00020000      /* 128 KB sectors */
148 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* max num of sects on one chip */
149 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks      */
150
151 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
152 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
153 #define CONFIG_SYS_FLASH_LOCK_TOUT      5       /* Timeout for Flash Set Lock Bit (in ms) */
154 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000   /* Timeout for Flash Clear Lock Bits (in ms) */
155
156 #ifdef ENABLE_FLASH_SUPPORT
157 /* For use with grsim FLASH emulation extension */
158 #define CONFIG_SYS_FLASH_PROTECTION     /* "Real" (hardware) sectors protection */
159
160 #undef CONFIG_FLASH_8BIT        /* Flash is 32-bit */
161
162 /*** CFI CONFIG ***/
163 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_8BIT
164 #define CONFIG_FLASH_CFI_DRIVER
165 #define CONFIG_SYS_FLASH_CFI
166 #endif
167
168 /*
169  * Environment settings
170  */
171 #define CONFIG_ENV_IS_NOWHERE 1
172 /*#define CONFIG_ENV_IS_IN_FLASH*/
173 /*#define CONFIG_ENV_SIZE               0x8000*/
174 #define CONFIG_ENV_SECT_SIZE    0x40000
175 #define CONFIG_ENV_OVERWRITE    1
176
177 /*
178  * Memory map
179  */
180 #define CONFIG_SYS_SDRAM_BASE           0x60000000
181 #define CONFIG_SYS_SDRAM_SIZE           0x02000000 /* 32MiB SDRAM */
182 #define CONFIG_SYS_SDRAM_END            (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
183
184 #define CONFIG_SYS_SRAM_BASE            0x40000000
185 #define CONFIG_SYS_SRAM_SIZE            0x00400000 /* 4MiB SRAM */
186 #define CONFIG_SYS_SRAM_END             (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
187
188 /* Always Run U-Boot from SDRAM */
189 #define CONFIG_SYS_RAM_BASE             CONFIG_SYS_SDRAM_BASE
190 #define CONFIG_SYS_RAM_SIZE             CONFIG_SYS_SDRAM_SIZE
191 #define CONFIG_SYS_RAM_END              CONFIG_SYS_SDRAM_END
192
193 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
194
195 #define CONFIG_SYS_PROM_SIZE            (8192-GENERATED_GBL_DATA_SIZE)
196 #define CONFIG_SYS_PROM_OFFSET          (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
197
198 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_PROM_OFFSET-32)
199 #define CONFIG_SYS_STACK_SIZE           (0x10000-32)
200
201 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
202 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
203 #   define CONFIG_SYS_RAMBOOT           1
204 #endif
205
206 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
207 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
208 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
209
210 #define CONFIG_SYS_MALLOC_END           (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
211 #define CONFIG_SYS_MALLOC_BASE          (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
212
213 /* relocated monitor area */
214 #define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
215 #define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
216
217 /* make un relocated address from relocated address */
218 #define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
219
220 #ifdef CONFIG_CMD_NET
221 /*
222  * Ethernet configuration
223  */
224 #define CONFIG_GRETH    1
225
226 /*
227  * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
228  */
229 /* #define CONFIG_GRETH_10MBIT 1 */
230 #define CONFIG_PHY_ADDR         0x00
231
232 #endif /* CONFIG_CMD_NET */
233
234 /*
235  * Miscellaneous configurable options
236  */
237 #define CONFIG_SYS_LONGHELP             /* undef to save memory     */
238 #if defined(CONFIG_CMD_KGDB)
239 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
240 #else
241 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
242 #endif
243 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
244 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
245 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
246
247 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
248 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
249
250 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
251
252 /***** Gaisler GRLIB IP-Cores Config ********/
253
254 #define CONFIG_SYS_GRLIB_SDRAM     0
255
256 #define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
257
258 /* No SDRAM Configuration */
259 #undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
260
261 /* LEON2 MCTRL configuration */
262 #define CONFIG_SYS_GRLIB_ESA_MCTRL1
263 #define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
264 #if CONFIG_GRSIM
265 /* GRSIM configuration */
266 #define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
267 #else
268 /* TSIM configuration */
269 #define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x81805220
270 #endif
271 #define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
272
273 /* GRLIB FT-MCTRL configuration */
274 #define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
275 #define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
276 #define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
277 #define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
278
279 /* no DDR controller */
280 #undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
281
282 /* no DDR2 Controller */
283 #undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
284
285 /* default kernel command line */
286 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
287
288 /* TSIM command:
289  * $ ./tsim-leon3 -mmu -cas
290  *
291  *  This TSIM evaluation version will expire 2015-04-02
292  *
293  *
294  *  TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
295  *
296  *  Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
297  *  This software may only be used with a valid license.
298  *  For latest updates, go to http://www.gaisler.com/
299  *  Comments or bug-reports to support@gaisler.com
300  *
301  * serial port A on stdin/stdout
302  * allocated 4096 K SRAM memory, in 1 bank
303  * allocated 32 M SDRAM memory, in 1 bank
304  * allocated 2048 K ROM memory
305  * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
306  * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
307  * tsim> leon
308  * 0x80000000   Memory configuration register 1   0x000002ff
309  * 0x80000004   Memory configuration register 2   0x81805220
310  * 0x80000008   Memory configuration register 3   0x00000000
311  */
312
313 #endif                          /* __CONFIG_H */