Merge git://git.denx.de/u-boot-marvell
[oweals/u-boot.git] / include / configs / dra7xx_evm.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2013
4  * Texas Instruments Incorporated.
5  * Lokesh Vutla   <lokeshvutla@ti.com>
6  *
7  * Configuration settings for the TI DRA7XX board.
8  * See ti_omap5_common.h for omap5 common settings.
9  */
10
11 #ifndef __CONFIG_DRA7XX_EVM_H
12 #define __CONFIG_DRA7XX_EVM_H
13
14 #include <environment/ti/dfu.h>
15
16 #define CONFIG_IODELAY_RECALIBRATION
17
18 #define CONFIG_VERY_BIG_RAM
19 #define CONFIG_MAX_MEM_MAPPED           0x80000000
20
21 #ifndef CONFIG_QSPI_BOOT
22 /* MMC ENV related defines */
23 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
24 #define CONFIG_ENV_SIZE                 (128 << 10)
25 #define CONFIG_ENV_OFFSET               0x260000
26 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
27 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
28 #endif
29
30 #if (CONFIG_CONS_INDEX == 1)
31 #define CONSOLEDEV                      "ttyO0"
32 #elif (CONFIG_CONS_INDEX == 3)
33 #define CONSOLEDEV                      "ttyO2"
34 #endif
35 #define CONFIG_SYS_NS16550_COM1         UART1_BASE      /* Base EVM has UART0 */
36 #define CONFIG_SYS_NS16550_COM2         UART2_BASE      /* UART2 */
37 #define CONFIG_SYS_NS16550_COM3         UART3_BASE      /* UART3 */
38
39 #define CONFIG_ENV_EEPROM_IS_ON_I2C
40 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
41 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
42
43 #define CONFIG_SYS_OMAP_ABE_SYSCK
44
45 #ifndef CONFIG_SPL_BUILD
46 #define DFUARGS \
47         "dfu_bufsiz=0x10000\0" \
48         DFU_ALT_INFO_MMC \
49         DFU_ALT_INFO_EMMC \
50         DFU_ALT_INFO_RAM \
51         DFU_ALT_INFO_QSPI
52 #endif
53
54 #ifdef CONFIG_SPL_BUILD
55 #undef CONFIG_CMD_BOOTD
56 #ifdef CONFIG_SPL_DFU
57 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
58 #define DFUARGS \
59         "dfu_bufsiz=0x10000\0" \
60         DFU_ALT_INFO_RAM
61 #endif
62 #endif
63
64 #include <configs/ti_omap5_common.h>
65
66 /* Enhance our eMMC support / experience. */
67 #define CONFIG_HSMMC2_8BIT
68
69 /* CPSW Ethernet */
70 #define CONFIG_BOOTP_DNS2
71 #define CONFIG_BOOTP_SEND_HOSTNAME
72 #define CONFIG_NET_RETRY_COUNT          10
73 #define CONFIG_PHY_TI
74
75 /* SPI */
76 #define CONFIG_TI_SPI_MMAP
77 #define CONFIG_QSPI_QUAD_SUPPORT
78
79 /*
80  * Default to using SPI for environment, etc.
81  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
82  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
83  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
84  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
85  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
86  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
87  * 0x9E0000 - 0x2000000 : USERLAND
88  */
89 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
90 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
91 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
92 #if defined(CONFIG_QSPI_BOOT)
93 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
94 #define CONFIG_ENV_SIZE                 (64 << 10)
95 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64 KB sectors */
96 #define CONFIG_ENV_OFFSET               0x1C0000
97 #define CONFIG_ENV_OFFSET_REDUND        0x1D0000
98 #endif
99
100 /* SPI SPL */
101 #define CONFIG_TI_EDMA3
102 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
103
104 #define CONFIG_SUPPORT_EMMC_BOOT
105
106 /* USB xHCI HOST */
107 #define CONFIG_USB_XHCI_OMAP
108
109 #define CONFIG_OMAP_USB2PHY2_HOST
110
111 /* SATA */
112 #define CONFIG_SCSI_AHCI_PLAT
113
114 /* NAND support */
115 #ifdef CONFIG_NAND
116 /* NAND: device related configs */
117 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
118 #define CONFIG_SYS_NAND_OOBSIZE         64
119 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
120 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
121                                          CONFIG_SYS_NAND_PAGE_SIZE)
122 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
123 /* NAND: driver related configs */
124 #define CONFIG_SYS_NAND_ONFI_DETECTION
125 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
126 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
127 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
128                                          10, 11, 12, 13, 14, 15, 16, 17, \
129                                          18, 19, 20, 21, 22, 23, 24, 25, \
130                                          26, 27, 28, 29, 30, 31, 32, 33, \
131                                          34, 35, 36, 37, 38, 39, 40, 41, \
132                                          42, 43, 44, 45, 46, 47, 48, 49, \
133                                          50, 51, 52, 53, 54, 55, 56, 57, }
134 #define CONFIG_SYS_NAND_ECCSIZE         512
135 #define CONFIG_SYS_NAND_ECCBYTES        14
136 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x00140000
137 /* NAND: SPL related configs */
138 /* NAND: SPL falcon mode configs */
139 #ifdef CONFIG_SPL_OS_BOOT
140 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
141 #endif
142 #endif /* !CONFIG_NAND */
143
144 /* Parallel NOR Support */
145 #if defined(CONFIG_NOR)
146 /* NOR: device related configs */
147 #define CONFIG_SYS_MAX_FLASH_SECT       512
148 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
149 #define CONFIG_SYS_FLASH_SIZE           (64 * 1024 * 1024) /* 64 MB */
150 /* #define CONFIG_INIT_IGNORE_ERROR */
151 #define CONFIG_SYS_MAX_FLASH_BANKS      1
152 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
153 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
154 /* Reduce SPL size by removing unlikey targets */
155 #ifdef CONFIG_NOR_BOOT
156 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)    /* 128 KiB */
157 #define CONFIG_ENV_OFFSET               0x001c0000
158 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
159 #endif
160 #endif  /* NOR support */
161
162 #endif /* __CONFIG_DRA7XX_EVM_H */