configs: Finish migration of PHY_GIGE
[oweals/u-boot.git] / include / configs / dra7xx_evm.h
1 /*
2  * (C) Copyright 2013
3  * Texas Instruments Incorporated.
4  * Lokesh Vutla   <lokeshvutla@ti.com>
5  *
6  * Configuration settings for the TI DRA7XX board.
7  * See ti_omap5_common.h for omap5 common settings.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __CONFIG_DRA7XX_EVM_H
13 #define __CONFIG_DRA7XX_EVM_H
14
15 #include <environment/ti/dfu.h>
16
17 #ifdef CONFIG_SPL_BUILD
18 #define CONFIG_IODELAY_RECALIBRATION
19 #endif
20
21 #define CONFIG_VERY_BIG_RAM
22 #define CONFIG_NR_DRAM_BANKS            2
23 #define CONFIG_MAX_MEM_MAPPED           0x80000000
24
25 #ifndef CONFIG_QSPI_BOOT
26 /* MMC ENV related defines */
27 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
28 #define CONFIG_ENV_SIZE                 (128 << 10)
29 #define CONFIG_ENV_OFFSET               0x260000
30 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
31 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
32 #endif
33
34 #if (CONFIG_CONS_INDEX == 1)
35 #define CONSOLEDEV                      "ttyO0"
36 #elif (CONFIG_CONS_INDEX == 3)
37 #define CONSOLEDEV                      "ttyO2"
38 #endif
39 #define CONFIG_SYS_NS16550_COM1         UART1_BASE      /* Base EVM has UART0 */
40 #define CONFIG_SYS_NS16550_COM2         UART2_BASE      /* UART2 */
41 #define CONFIG_SYS_NS16550_COM3         UART3_BASE      /* UART3 */
42
43 #define CONFIG_ENV_EEPROM_IS_ON_I2C
44 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
45 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
46
47 #define CONFIG_SYS_OMAP_ABE_SYSCK
48
49 #ifndef CONFIG_SPL_BUILD
50 /* Define the default GPT table for eMMC */
51 #define PARTS_DEFAULT \
52         /* Linux partitions */ \
53         "uuid_disk=${uuid_gpt_disk};" \
54         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
55         /* Android partitions */ \
56         "partitions_android=" \
57         "uuid_disk=${uuid_gpt_disk};" \
58         "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
59         "name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
60         "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
61         "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
62         "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
63         "name=efs,size=16M,uuid=${uuid_gpt_efs};" \
64         "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
65         "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
66         "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
67         "name=system,size=768M,uuid=${uuid_gpt_system};" \
68         "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
69         "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
70         "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
71         "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
72
73 #define DFUARGS \
74         "dfu_bufsiz=0x10000\0" \
75         DFU_ALT_INFO_MMC \
76         DFU_ALT_INFO_EMMC \
77         DFU_ALT_INFO_RAM \
78         DFU_ALT_INFO_QSPI
79 #else
80 /* Discard fastboot in SPL build, to spare some space */
81 #undef CONFIG_FASTBOOT
82 #undef CONFIG_USB_FUNCTION_FASTBOOT
83 #undef CONFIG_CMD_FASTBOOT
84 #undef CONFIG_ANDROID_BOOT_IMAGE
85 #undef CONFIG_FASTBOOT_BUF_ADDR
86 #undef CONFIG_FASTBOOT_BUF_SIZE
87 #undef CONFIG_FASTBOOT_FLASH
88 #endif
89
90 #ifdef CONFIG_SPL_BUILD
91 #undef CONFIG_CMD_BOOTD
92 #ifdef CONFIG_SPL_DFU_SUPPORT
93 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
94 #define DFUARGS \
95         "dfu_bufsiz=0x10000\0" \
96         DFU_ALT_INFO_RAM
97 #endif
98 #endif
99
100 #include <configs/ti_omap5_common.h>
101
102 /* Enhance our eMMC support / experience. */
103 #define CONFIG_RANDOM_UUID
104 #define CONFIG_HSMMC2_8BIT
105
106 /* CPSW Ethernet */
107 #define CONFIG_BOOTP_DNS                /* Configurable parts of CMD_DHCP */
108 #define CONFIG_BOOTP_DNS2
109 #define CONFIG_BOOTP_SEND_HOSTNAME
110 #define CONFIG_BOOTP_GATEWAY
111 #define CONFIG_BOOTP_SUBNETMASK
112 #define CONFIG_NET_RETRY_COUNT          10
113 #define CONFIG_DRIVER_TI_CPSW           /* Driver for IP block */
114 #define CONFIG_MII                      /* Required in net/eth.c */
115 #define CONFIG_PHY_TI
116
117 /* SPI */
118 #undef  CONFIG_OMAP3_SPI
119 #define CONFIG_TI_SPI_MMAP
120 #define CONFIG_SF_DEFAULT_SPEED                76800000
121 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
122 #define CONFIG_QSPI_QUAD_SUPPORT
123
124 /*
125  * Default to using SPI for environment, etc.
126  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
127  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
128  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
129  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
130  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
131  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
132  * 0x9E0000 - 0x2000000 : USERLAND
133  */
134 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
135 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
136 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
137 #if defined(CONFIG_QSPI_BOOT)
138 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
139 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
140 #define CONFIG_ENV_SIZE                 (64 << 10)
141 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64 KB sectors */
142 #define CONFIG_ENV_OFFSET               0x1C0000
143 #define CONFIG_ENV_OFFSET_REDUND        0x1D0000
144 #endif
145
146 /* SPI SPL */
147 #define CONFIG_TI_EDMA3
148 #define CONFIG_SPL_SPI_LOAD
149 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
150
151 #define CONFIG_SUPPORT_EMMC_BOOT
152
153 /* USB xHCI HOST */
154 #define CONFIG_USB_XHCI_OMAP
155
156 #define CONFIG_OMAP_USB_PHY
157 #define CONFIG_OMAP_USB2PHY2_HOST
158
159 /* SATA */
160 #define CONFIG_LIBATA
161 #define CONFIG_SCSI_AHCI
162 #define CONFIG_SCSI_AHCI_PLAT
163 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
164 #define CONFIG_SYS_SCSI_MAX_LUN         1
165 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
166                                                 CONFIG_SYS_SCSI_MAX_LUN)
167
168 /* NAND support */
169 #ifdef CONFIG_NAND
170 /* NAND: device related configs */
171 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
172 #define CONFIG_SYS_NAND_OOBSIZE         64
173 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
174 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
175 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
176                                          CONFIG_SYS_NAND_PAGE_SIZE)
177 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
178 /* NAND: driver related configs */
179 #define CONFIG_NAND_OMAP_GPMC
180 #define CONFIG_NAND_OMAP_ELM
181 #define CONFIG_SYS_NAND_ONFI_DETECTION
182 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
183 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
184 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
185                                          10, 11, 12, 13, 14, 15, 16, 17, \
186                                          18, 19, 20, 21, 22, 23, 24, 25, \
187                                          26, 27, 28, 29, 30, 31, 32, 33, \
188                                          34, 35, 36, 37, 38, 39, 40, 41, \
189                                          42, 43, 44, 45, 46, 47, 48, 49, \
190                                          50, 51, 52, 53, 54, 55, 56, 57, }
191 #define CONFIG_SYS_NAND_ECCSIZE         512
192 #define CONFIG_SYS_NAND_ECCBYTES        14
193 #define MTDIDS_DEFAULT                  "nand0=nand.0"
194 #define MTDPARTS_DEFAULT                "mtdparts=nand.0:" \
195                                         "128k(NAND.SPL)," \
196                                         "128k(NAND.SPL.backup1)," \
197                                         "128k(NAND.SPL.backup2)," \
198                                         "128k(NAND.SPL.backup3)," \
199                                         "256k(NAND.u-boot-spl-os)," \
200                                         "1m(NAND.u-boot)," \
201                                         "128k(NAND.u-boot-env)," \
202                                         "128k(NAND.u-boot-env.backup1)," \
203                                         "8m(NAND.kernel)," \
204                                         "-(NAND.file-system)"
205 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
206 /* NAND: SPL related configs */
207 #ifdef CONFIG_SPL_NAND_SUPPORT
208 #define CONFIG_SPL_NAND_AM33XX_BCH
209 #endif
210 /* NAND: SPL falcon mode configs */
211 #ifdef CONFIG_SPL_OS_BOOT
212 #define CONFIG_CMD_SPL_NAND_OFS         0x00080000 /* os-boot params*/
213 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
214 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
215 #endif
216 #endif /* !CONFIG_NAND */
217
218 /* Parallel NOR Support */
219 #if defined(CONFIG_NOR)
220 /* NOR: device related configs */
221 #define CONFIG_SYS_MAX_FLASH_SECT       512
222 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
223 #define CONFIG_SYS_FLASH_SIZE           (64 * 1024 * 1024) /* 64 MB */
224 /* #define CONFIG_INIT_IGNORE_ERROR */
225 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
226 #define CONFIG_SYS_FLASH_PROTECTION
227 #define CONFIG_SYS_FLASH_CFI
228 #define CONFIG_FLASH_CFI_DRIVER
229 #define CONFIG_FLASH_CFI_MTD
230 #define CONFIG_SYS_MAX_FLASH_BANKS      1
231 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
232 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
233 /* Reduce SPL size by removing unlikey targets */
234 #ifdef CONFIG_NOR_BOOT
235 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)    /* 128 KiB */
236 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0"
237 #define MTDPARTS_DEFAULT                "mtdparts=physmap-flash.0:" \
238                                         "128k(NOR.SPL)," \
239                                         "128k(NOR.SPL.backup1)," \
240                                         "128k(NOR.SPL.backup2)," \
241                                         "128k(NOR.SPL.backup3)," \
242                                         "256k(NOR.u-boot-spl-os)," \
243                                         "1m(NOR.u-boot)," \
244                                         "128k(NOR.u-boot-env)," \
245                                         "128k(NOR.u-boot-env.backup1)," \
246                                         "8m(NOR.kernel)," \
247                                         "-(NOR.rootfs)"
248 #define CONFIG_ENV_OFFSET               0x001c0000
249 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
250 #endif
251 #endif  /* NOR support */
252
253 #endif /* __CONFIG_DRA7XX_EVM_H */