drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definition
[oweals/u-boot.git] / include / configs / devkit8000.h
1 /*
2  * (C) Copyright 2006-2008
3  * Texas Instruments.
4  * Richard Woodruff <r-woodruff2@ti.com>
5  * Syed Mohammed Khasim <x0khasim@ti.com>
6  *
7  * (C) Copyright 2009
8  * Frederik Kriewitz <frederik@kriewitz.eu>
9  *
10  * Configuration settings for the DevKit8000 board.
11  *
12  * SPDX-License-Identifier:     GPL-2.0+
13  */
14
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17
18 /* High Level Configuration Options */
19 #define CONFIG_OMAP3_DEVKIT8000 1       /* working with DevKit8000 */
20 #define CONFIG_MACH_TYPE        MACH_TYPE_DEVKIT8000
21
22 /*
23  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
24  * 64 bytes before this address should be set aside for u-boot.img's
25  * header. That is 0x800FFFC0--0x80100000 should not be used for any
26  * other needs.
27  */
28 #define CONFIG_SYS_TEXT_BASE    0x80100000
29
30 #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
31 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
32
33 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
34 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
35
36 #define CONFIG_NAND
37
38 /*  Physical Memory Map  */
39 #define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
40
41 #include <configs/ti_omap3_common.h>
42
43 /* Display CPU and Board information */
44 #define CONFIG_DISPLAY_CPUINFO          1
45 #define CONFIG_DISPLAY_BOARDINFO        1
46
47 #define CONFIG_MISC_INIT_R
48
49 #define CONFIG_REVISION_TAG             1
50
51 /* Size of malloc() pool */
52 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
53                                                 /* Sector */
54 #undef CONFIG_SYS_MALLOC_LEN
55 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
56
57 /* Hardware drivers */
58 /* DM9000 */
59 #define CONFIG_NET_RETRY_COUNT          20
60 #define CONFIG_DRIVER_DM9000            1
61 #define CONFIG_DM9000_BASE              0x2c000000
62 #define DM9000_IO                       CONFIG_DM9000_BASE
63 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 0x400)
64 #define CONFIG_DM9000_USE_16BIT         1
65 #define CONFIG_DM9000_NO_SROM           1
66 #undef  CONFIG_DM9000_DEBUG
67
68 /* SPI */
69 #undef CONFIG_SPI
70 #undef CONFIG_OMAP3_SPI
71
72 /* I2C */
73 #undef CONFIG_SYS_I2C_OMAP24XX
74 #define CONFIG_SYS_I2C_OMAP34XX
75
76 /* TWL4030 */
77 #define CONFIG_TWL4030_LED              1
78
79 /* Board NAND Info */
80 #define MTDIDS_DEFAULT                  "nand0=nand"
81 #define MTDPARTS_DEFAULT                "mtdparts=nand:" \
82                                                 "512k(x-loader)," \
83                                                 "1920k(u-boot)," \
84                                                 "128k(u-boot-env)," \
85                                                 "4m(kernel)," \
86                                                 "-(fs)"
87
88 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
89                                                         /* to access nand */
90 #define CONFIG_JFFS2_NAND
91 /* nand device jffs2 lives on */
92 #define CONFIG_JFFS2_DEV                "nand0"
93 /* start of jffs2 partition */
94 #define CONFIG_JFFS2_PART_OFFSET        0x680000
95 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* size of jffs2 */
96                                                         /* partition */
97
98 /* commands to include */
99 #define CONFIG_CMD_DHCP                 /* DHCP support                 */
100 #define CONFIG_CMD_JFFS2                /* JFFS2 Support                */
101 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands       */
102
103 #undef CONFIG_CMD_SPI
104 #undef CONFIG_CMD_ASKENV
105 #undef CONFIG_CMD_BOOTZ
106 #undef CONFIG_SUPPORT_RAW_INITRD
107 #undef CONFIG_FAT_WRITE
108 #undef CONFIG_CMD_EXT4
109 #undef CONFIG_CMD_FS_GENERIC
110
111 /* BOOTP/DHCP options */
112 #define CONFIG_BOOTP_SUBNETMASK
113 #define CONFIG_BOOTP_GATEWAY
114 #define CONFIG_BOOTP_HOSTNAME
115 #define CONFIG_BOOTP_NISDOMAIN
116 #define CONFIG_BOOTP_BOOTPATH
117 #define CONFIG_BOOTP_BOOTFILESIZE
118 #define CONFIG_BOOTP_DNS
119 #define CONFIG_BOOTP_DNS2
120 #define CONFIG_BOOTP_SEND_HOSTNAME
121 #define CONFIG_BOOTP_NTPSERVER
122 #define CONFIG_BOOTP_TIMEOFFSET
123 #undef CONFIG_BOOTP_VENDOREX
124
125 /* Environment information */
126 #define CONFIG_EXTRA_ENV_SETTINGS \
127         "loadaddr=0x82000000\0" \
128         "console=ttyO2,115200n8\0" \
129         "mmcdev=0\0" \
130         "vram=12M\0" \
131         "dvimode=1024x768MR-16@60\0" \
132         "defaultdisplay=dvi\0" \
133         "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
134         "kernelopts=rw\0" \
135         "commonargs=" \
136                 "setenv bootargs console=${console} " \
137                 "vram=${vram} " \
138                 "omapfb.mode=dvi:${dvimode} " \
139                 "omapdss.def_disp=${defaultdisplay}\0" \
140         "mmcargs=" \
141                 "run commonargs; " \
142                 "setenv bootargs ${bootargs} " \
143                 "root=/dev/mmcblk0p2 " \
144                 "rootwait " \
145                 "${kernelopts}\0" \
146         "nandargs=" \
147                 "run commonargs; " \
148                 "setenv bootargs ${bootargs} " \
149                 "omapfb.mode=dvi:${dvimode} " \
150                 "omapdss.def_disp=${defaultdisplay} " \
151                 "root=/dev/mtdblock4 " \
152                 "rootfstype=jffs2 " \
153                 "${kernelopts}\0" \
154         "netargs=" \
155                 "run commonargs; " \
156                 "setenv bootargs ${bootargs} " \
157                 "root=/dev/nfs " \
158                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
159                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
160                 "${kernelopts} " \
161                 "dnsip1=${dnsip} " \
162                 "dnsip2=${dnsip2}\0" \
163         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
164         "bootscript=echo Running bootscript from mmc ...; " \
165                 "source ${loadaddr}\0" \
166         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
167         "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
168         "mmcboot=echo Booting from mmc ...; " \
169                 "run mmcargs; " \
170                 "bootm ${loadaddr}\0" \
171         "nandboot=echo Booting from nand ...; " \
172                 "run nandargs; " \
173                 "nand read ${loadaddr} 280000 400000; " \
174                 "bootm ${loadaddr}\0" \
175         "netboot=echo Booting from network ...; " \
176                 "dhcp ${loadaddr}; " \
177                 "run netargs; " \
178                 "bootm ${loadaddr}\0" \
179         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
180                         "if run loadbootscript; then " \
181                                 "run bootscript; " \
182                         "else " \
183                                 "if run loaduimage; then " \
184                                         "run mmcboot; " \
185                                 "else run nandboot; " \
186                                 "fi; " \
187                         "fi; " \
188                 "else run nandboot; fi\0"
189
190
191 #define CONFIG_BOOTCOMMAND "run autoboot"
192
193 /* Boot Argument Buffer Size */
194 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0 + 0x07000000)
195 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
196                                         0x01000000) /* 16MB */
197
198 /* NAND and environment organization  */
199 #define CONFIG_ENV_IS_IN_NAND           1
200 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
201
202 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
203
204 /* SRAM config */
205 #define CONFIG_SYS_SRAM_START              0x40200000
206 #define CONFIG_SYS_SRAM_SIZE               0x10000
207
208 /* Defines for SPL */
209 #undef CONFIG_SPL_MTD_SUPPORT
210
211 #undef CONFIG_SPL_TEXT_BASE
212 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
213
214 /* NAND boot config */
215 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
216 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
217 #define CONFIG_SYS_NAND_PAGE_COUNT      64
218 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
219 #define CONFIG_SYS_NAND_OOBSIZE         64
220 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
221 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
222 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
223                                                 10, 11, 12, 13}
224
225 #define CONFIG_SYS_NAND_ECCSIZE         512
226 #define CONFIG_SYS_NAND_ECCBYTES        3
227 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
228
229 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
230 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x200000
231
232 /* SPL OS boot options */
233 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400 /* 1024 byte */
234 #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
235                                         0x400000)
236 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
237
238 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
239 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
240 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
241 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
242 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x8   /* address 0x1000 */
243 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  8     /* 4KB */
244
245 #undef CONFIG_SYS_SPL_ARGS_ADDR
246 #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
247
248 #endif /* __CONFIG_H */