include/configs/cyrus.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Based on corenet_ds.h
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #include <linux/stringify.h>
  10
  11 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  12 #error Must call Cyrus CONFIG with a specific CPU enabled.
  13 #endif
  14
  15 #define CONFIG_SDCARD
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE3
  18 #define CONFIG_PCIE4
  19 #ifdef CONFIG_ARCH_P5020
  20 #define CONFIG_SYS_FSL_RAID_ENGINE
  21 #define CONFIG_SYS_DPAA_RMAN
  22 #endif
  23 #define CONFIG_SYS_DPAA_PME
  24
  25 /*
  26  * Corenet DS style board configuration file
  27  */
  28 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  29 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  30 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  31 #if defined(CONFIG_ARCH_P5020)
  32 #define CONFIG_SYS_CLK_FREQ 133000000
  33 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  34 #elif defined(CONFIG_ARCH_P5040)
  35 #define CONFIG_SYS_CLK_FREQ 100000000
  36 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41
  42 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  43
  44 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  45 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  46 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  47 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  48 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  49 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  50
  51 #define CONFIG_ENV_OVERWRITE
  52
  53 #if defined(CONFIG_SDCARD)
  54 #define CONFIG_FSL_FIXED_MMC_LOCATION
  55 #define CONFIG_SYS_MMC_ENV_DEV          0
  56 #endif
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_SYS_CACHE_STASHING
  62 #define CONFIG_BACKSIDE_L2_CACHE
  63 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  64 #define CONFIG_BTB                      /* toggle branch predition */
  65 #define CONFIG_DDR_ECC
  66 #ifdef CONFIG_DDR_ECC
  67 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  68 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  69 #endif
  70
  71 #define CONFIG_ENABLE_36BIT_PHYS
  72
  73 #ifdef CONFIG_PHYS_64BIT
  74 #define CONFIG_ADDR_MAP
  75 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  76 #endif
  77
  78 /* test POST memory test */
  79 #undef CONFIG_POST
  80
  81 /*
  82  *  Config the L3 Cache as L3 SRAM
  83  */
  84 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  85 #ifdef CONFIG_PHYS_64BIT
  86 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  87 #else
  88 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  89 #endif
  90 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  91 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  92
  93 #ifdef CONFIG_PHYS_64BIT
  94 #define CONFIG_SYS_DCSRBAR              0xf0000000
  95 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  96 #endif
  97
  98 /*
  99  * DDR Setup
 100  */
 101 #define CONFIG_VERY_BIG_RAM
 102 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 103 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 104
 105 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 106 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 107
 108 #define CONFIG_DDR_SPD
 109
 110 #define CONFIG_SYS_SPD_BUS_NUM  1
 111 #define SPD_EEPROM_ADDRESS1     0x51
 112 #define SPD_EEPROM_ADDRESS2     0x52
 113 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 114
 115 /*
 116  * Local Bus Definitions
 117  */
 118
 119 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 120 #ifdef CONFIG_PHYS_64BIT
 121 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 122 #else
 123 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 124 #endif
 125
 126 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 127 #ifdef CONFIG_PHYS_64BIT
 128 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 129 #else
 130 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 131 #endif
 132
 133 /* Set the local bus clock 1/16 of platform clock */
 134 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 135
 136 #define CONFIG_SYS_BR0_PRELIM \
 137 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 138 #define CONFIG_SYS_BR1_PRELIM \
 139 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 140
 141 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 142 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 143
 144 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 145
 146 #if defined(CONFIG_RAMBOOT_PBL)
 147 #define CONFIG_SYS_RAMBOOT
 148 #endif
 149
 150 #define CONFIG_HWCONFIG
 151
 152 /* define to use L1 as initial stack */
 153 #define CONFIG_L1_INIT_RAM
 154 #define CONFIG_SYS_INIT_RAM_LOCK
 155 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 156 #ifdef CONFIG_PHYS_64BIT
 157 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 158 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 159 /* The assembler doesn't like typecast */
 160 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 161         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 162           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 163 #else
 164 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 165 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 166 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 167 #endif
 168 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 169
 170 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 171 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 172
 173 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 174 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 175
 176 /* Serial Port - controlled on board with jumper J8
 177  * open - index 2
 178  * shorted - index 1
 179  */
 180 #define CONFIG_SYS_NS16550_SERIAL
 181 #define CONFIG_SYS_NS16550_REG_SIZE     1
 182 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 183
 184 #define CONFIG_SYS_BAUDRATE_TABLE       \
 185 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 186
 187 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 188 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 189 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 190 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 191
 192 /* I2C */
 193 #define CONFIG_SYS_I2C
 194 #define CONFIG_SYS_I2C_FSL
 195 #define CONFIG_I2C_MULTI_BUS
 196 #define CONFIG_I2C_CMD_TREE
 197 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 198 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 199 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 200 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 201 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 202 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 203 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 204 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 205 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 206 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 207 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 208 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 209
 210 #define CONFIG_ID_EEPROM
 211 #define CONFIG_SYS_I2C_EEPROM_NXID
 212 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 213 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 214 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 215
 216 #define CONFIG_SYS_I2C_GENERIC_MAC
 217 #define CONFIG_SYS_I2C_MAC1_BUS 3
 218 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 219 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 220 #define CONFIG_SYS_I2C_MAC2_BUS 0
 221 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 222 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 223
 224 #define CONFIG_RTC_MCP79411             1
 225 #define CONFIG_SYS_RTC_BUS_NUM          3
 226 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 227
 228 /*
 229  * eSPI - Enhanced SPI
 230  */
 231
 232 /*
 233  * General PCI
 234  * Memory space is mapped 1-1, but I/O space must start from 0.
 235  */
 236
 237 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 238 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 239 #ifdef CONFIG_PHYS_64BIT
 240 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 241 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 242 #else
 243 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 244 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 245 #endif
 246 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 247 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 248 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 249 #ifdef CONFIG_PHYS_64BIT
 250 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 251 #else
 252 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 253 #endif
 254 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 255
 256 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 257 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 258 #ifdef CONFIG_PHYS_64BIT
 259 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 260 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 261 #else
 262 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 263 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 264 #endif
 265 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 266 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 267 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 268 #ifdef CONFIG_PHYS_64BIT
 269 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 270 #else
 271 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 272 #endif
 273 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 274
 275 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 276 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 277 #ifdef CONFIG_PHYS_64BIT
 278 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 279 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 280 #else
 281 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 282 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 283 #endif
 284 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 285 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 286 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 289 #else
 290 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 291 #endif
 292 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 293
 294 /* controller 4, Base address 203000 */
 295 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 296 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 297 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 298 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 299 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 300 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 301
 302 /* Qman/Bman */
 303 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 304 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 305 #ifdef CONFIG_PHYS_64BIT
 306 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 307 #else
 308 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 309 #endif
 310 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 311 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 312 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 313 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 314 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 315 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 316                                          CONFIG_SYS_BMAN_CENA_SIZE)
 317 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 318 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 319 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 320 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 321 #ifdef CONFIG_PHYS_64BIT
 322 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 323 #else
 324 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 325 #endif
 326 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 327 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 328 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 329 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 330 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 331 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 332                                           CONFIG_SYS_QMAN_CENA_SIZE)
 333 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 334 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 335
 336 #define CONFIG_SYS_DPAA_FMAN
 337 /* Default address of microcode for the Linux Fman driver */
 338 /*
 339  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 340  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 341  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 342  */
 343 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 344
 345 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 346 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 347
 348 #ifdef CONFIG_PCI
 349 #define CONFIG_PCI_INDIRECT_BRIDGE
 350
 351 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 352 #endif  /* CONFIG_PCI */
 353
 354 /* SATA */
 355 #ifdef CONFIG_FSL_SATA_V2
 356 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 357 #define CONFIG_SATA1
 358 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 359 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 360 #define CONFIG_SATA2
 361 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 362 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 363
 364 #define CONFIG_LBA48
 365 #endif
 366
 367 #ifdef CONFIG_FMAN_ENET
 368 #define CONFIG_SYS_TBIPA_VALUE  8
 369 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 370 #endif
 371
 372 /*
 373  * Environment
 374  */
 375 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 376 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 377
 378 /*
 379  * USB
 380  */
 381 #define CONFIG_HAS_FSL_DR_USB
 382 #define CONFIG_HAS_FSL_MPH_USB
 383
 384 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 385 #define CONFIG_USB_EHCI_FSL
 386 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 387 #define CONFIG_EHCI_IS_TDI
 388  /* _VIA_CONTROL_EP  */
 389 #endif
 390
 391 #ifdef CONFIG_MMC
 392 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 393 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 394 #endif
 395
 396 /*
 397  * Miscellaneous configurable options
 398  */
 399 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 400
 401 /*
 402  * For booting Linux, the board info and command line data
 403  * have to be in the first 64 MB of memory, since this is
 404  * the maximum mapped by the Linux kernel during initialization.
 405  */
 406 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 407 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 408
 409 #ifdef CONFIG_CMD_KGDB
 410 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 411 #endif
 412
 413 /*
 414  * Environment Configuration
 415  */
 416 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 417 #define CONFIG_BOOTFILE         "uImage"
 418 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 419
 420 /* default location for tftp and bootm */
 421 #define CONFIG_LOADADDR         1000000
 422
 423 #define __USB_PHY_TYPE  utmi
 424
 425 #define CONFIG_EXTRA_ENV_SETTINGS \
 426 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 427 "bank_intlv=cs0_cs1;"                                   \
 428 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 429 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 430 "netdev=eth0\0"                                         \
 431 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 432 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 433 "consoledev=ttyS0\0"                                    \
 434 "ramdiskaddr=2000000\0"                                 \
 435 "fdtaddr=1e00000\0"                                     \
 436 "bdev=sda3\0"
 437
 438 #define CONFIG_HDBOOT                                   \
 439 "setenv bootargs root=/dev/$bdev rw "           \
 440 "console=$consoledev,$baudrate $othbootargs;"   \
 441 "tftp $loadaddr $bootfile;"                     \
 442 "tftp $fdtaddr $fdtfile;"                       \
 443 "bootm $loadaddr - $fdtaddr"
 444
 445 #define CONFIG_NFSBOOTCOMMAND                   \
 446 "setenv bootargs root=/dev/nfs rw "     \
 447 "nfsroot=$serverip:$rootpath "          \
 448 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 449 "console=$consoledev,$baudrate $othbootargs;"   \
 450 "tftp $loadaddr $bootfile;"             \
 451 "tftp $fdtaddr $fdtfile;"               \
 452 "bootm $loadaddr - $fdtaddr"
 453
 454 #define CONFIG_RAMBOOTCOMMAND                           \
 455 "setenv bootargs root=/dev/ram rw "             \
 456 "console=$consoledev,$baudrate $othbootargs;"   \
 457 "tftp $ramdiskaddr $ramdiskfile;"               \
 458 "tftp $loadaddr $bootfile;"                     \
 459 "tftp $fdtaddr $fdtfile;"                       \
 460 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 461
 462 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 463
 464 #include <asm/fsl_secure_boot.h>
 465
 466 #endif  /* __CONFIG_H */