include/configs/colibri_imx7.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016-2018 Toradex AG
   4  *
   5  * Configuration settings for the Colibri iMX7 module.
   6  *
   7  * based on mx7dsabresd.h:
   8  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   9  */
  10
  11 #ifndef __COLIBRI_IMX7_CONFIG_H
  12 #define __COLIBRI_IMX7_CONFIG_H
  13
  14 #include "mx7_common.h"
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  18
  19 /* Network */
  20 #define CONFIG_FEC_MXC
  21 #define CONFIG_FEC_XCV_TYPE             RMII
  22 #define CONFIG_ETHPRIME                 "FEC"
  23 #define CONFIG_FEC_MXC_PHYADDR          0
  24
  25 #define CONFIG_TFTP_TSIZE
  26
  27 /* ENET1 */
  28 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  29
  30 /* MMC Config*/
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  32 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
  33 #define CONFIG_SYS_FSL_USDHC_NUM        1
  34 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
  35 #define CONFIG_SYS_FSL_USDHC_NUM        2
  36 #endif
  37
  38 #undef CONFIG_BOOTM_PLAN9
  39 #undef CONFIG_BOOTM_RTEMS
  40
  41 /* I2C configs */
  42 #define CONFIG_SYS_I2C_MXC
  43 #define CONFIG_SYS_I2C_SPEED            100000
  44
  45 #define CONFIG_IPADDR                   192.168.10.2
  46 #define CONFIG_NETMASK                  255.255.255.0
  47 #define CONFIG_SERVERIP                 192.168.10.1
  48
  49 #define EMMC_BOOTCMD \
  50         "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
  51                 "rootfstype=ext4 rootwait\0" \
  52         "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
  53                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
  54                 "${vidargs}; echo Booting from internal eMMC chip...; " \
  55                 "run m4boot && " \
  56                 "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
  57                 "${soc}-colibri-emmc-${fdt_board}.dtb && " \
  58                 "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
  59                 "${boot_file} && run fdt_fixup && " \
  60                 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  61         "emmcbootpart=1\0" \
  62         "emmcdev=0\0" \
  63         "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
  64         "emmcrootpart=2\0"
  65
  66
  67 #define MEM_LAYOUT_ENV_SETTINGS \
  68         "bootm_size=0x10000000\0" \
  69         "fdt_addr_r=0x82000000\0" \
  70         "fdt_high=0xffffffff\0" \
  71         "initrd_high=0xffffffff\0" \
  72         "kernel_addr_r=0x81000000\0" \
  73         "ramdisk_addr_r=0x82100000\0"
  74
  75 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
  76 #define SD_BOOTDEV 0
  77 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
  78 #define SD_BOOTDEV 1
  79 #endif
  80
  81 #define SD_BOOTCMD \
  82         "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
  83         "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
  84         "setenv bootargs ${defargs} ${sdargs} " \
  85         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  86         "run m4boot && " \
  87         "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
  88         "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
  89         "${soc}-colibri-${fdt_board}.dtb && " \
  90         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  91         "sdbootpart=1\0" \
  92         "sddev=" __stringify(SD_BOOTDEV) "\0" \
  93         "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
  94         "sdrootpart=2\0"
  95
  96
  97 #define NFS_BOOTCMD \
  98         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  99         "nfsboot=run setup; " \
 100                 "setenv bootargs ${defargs} ${nfsargs} " \
 101                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 102                 "dhcp ${kernel_addr_r} && " \
 103                 "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
 104                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 105
 106 #define UBI_BOOTCMD     \
 107         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 108                 "ubi.fm_autoconvert=1\0" \
 109         "ubiboot=run setup; " \
 110                 "setenv bootargs ${defargs} ${ubiargs} " \
 111                 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 112                 "ubi part ubi && run m4boot && " \
 113                 "ubi read ${kernel_addr_r} kernel && " \
 114                 "ubi read ${fdt_addr_r} dtb && " \
 115                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 116
 117 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 118 #define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
 119         "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
 120 #define MODULE_EXTRA_ENV_SETTINGS \
 121         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 122         UBI_BOOTCMD
 123 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 124 #define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
 125         "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
 126 #define MODULE_EXTRA_ENV_SETTINGS \
 127         "variant=-emmc\0" \
 128         EMMC_BOOTCMD
 129 #endif
 130
 131 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 132 #define BOOT_TARGET_DEVICES(func) \
 133         func(MMC, mmc, 0) \
 134         func(USB, usb, 0) \
 135         func(DHCP, dhcp, na)
 136 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 137 #define BOOT_TARGET_DEVICES(func) \
 138         func(MMC, mmc, 0) \
 139         func(MMC, mmc, 1) \
 140         func(USB, usb, 0) \
 141         func(DHCP, dhcp, na)
 142 #endif
 143 #include <config_distro_bootcmd.h>
 144
 145 #define CONFIG_EXTRA_ENV_SETTINGS \
 146         BOOTENV \
 147         MEM_LAYOUT_ENV_SETTINGS \
 148         NFS_BOOTCMD \
 149         SD_BOOTCMD \
 150         MODULE_EXTRA_ENV_SETTINGS \
 151         "boot_file=zImage\0" \
 152         "console=ttymxc0\0" \
 153         "defargs=\0" \
 154         "fdt_board=eval-v3\0" \
 155         "fdt_fixup=;\0" \
 156         "m4boot=;\0" \
 157         "ip_dyn=yes\0" \
 158         "kernel_file=zImage\0" \
 159         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 160                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 161                 "${board}/flash_eth.img && source ${loadaddr}\0" \
 162         "setsdupdate=mmc rescan && setenv interface mmc && " \
 163                 "fatload ${interface} 0:1 ${loadaddr} " \
 164                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 165         "setup=setenv setupargs " \
 166                 "console=tty1 console=${console}" \
 167                 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
 168         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 169         "setusbupdate=usb start && setenv interface usb && " \
 170                 "fatload ${interface} 0:1 ${loadaddr} " \
 171                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 172         "splashpos=m,m\0" \
 173         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 174         "updlevel=2\0"
 175
 176 /* Miscellaneous configurable options */
 177
 178 #define CONFIG_SYS_MEMTEST_START        0x80000000
 179 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x0c000000)
 180
 181 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 182 #define CONFIG_SYS_HZ                   1000
 183
 184 /* Physical Memory Map */
 185 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 186
 187 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 188 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 189 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 190
 191 #define CONFIG_SYS_INIT_SP_OFFSET \
 192         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 193 #define CONFIG_SYS_INIT_SP_ADDR \
 194         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 195
 196 /* environment organization */
 197
 198 #if defined(CONFIG_ENV_IS_IN_MMC)
 199 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 200 #define CONFIG_ENV_SIZE                 (8 * 1024)
 201 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 202                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 203 #define CONFIG_SYS_MMC_ENV_DEV          0
 204 #define CONFIG_SYS_MMC_ENV_PART         1
 205 #elif defined(CONFIG_ENV_IS_IN_NAND)
 206 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 207 #define CONFIG_ENV_OFFSET               (28 * CONFIG_ENV_SECT_SIZE)
 208 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 209 #endif
 210
 211 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 212 /* NAND stuff */
 213 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 214 #define CONFIG_SYS_NAND_BASE            0x40000000
 215 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 216 #define CONFIG_SYS_NAND_ONFI_DETECTION
 217 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 218 #endif
 219
 220 /* USB Configs */
 221 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 222
 223 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 224 #define CONFIG_MXC_USB_FLAGS            0
 225 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 226
 227 #define CONFIG_IMX_THERMAL
 228
 229 #define CONFIG_USBD_HS
 230
 231 /* USB Device Firmware Update support */
 232 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 233 #define DFU_DEFAULT_POLL_TIMEOUT        300
 234
 235 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 236 #define CONFIG_VIDEO_MXS
 237 #define CONFIG_VIDEO_LOGO
 238 #define CONFIG_SPLASH_SCREEN
 239 #define CONFIG_SPLASH_SCREEN_ALIGN
 240 #define CONFIG_BMP_16BPP
 241 #define CONFIG_VIDEO_BMP_RLE8
 242 #define CONFIG_VIDEO_BMP_LOGO
 243 #endif
 244
 245 #endif