include/configs/acadia.h

   1 /*
   2  * (C) Copyright 2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /************************************************************************
   9  * acadia.h - configuration for AMCC Acadia (405EZ)
  10  ***********************************************************************/
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*-----------------------------------------------------------------------
  16  * High Level Configuration Options
  17  *----------------------------------------------------------------------*/
  18 #define CONFIG_ACADIA           1               /* Board is Acadia      */
  19 #define CONFIG_405EZ            1               /* Specifc 405EZ support*/
  20
  21 #ifndef CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  23 #endif
  24
  25 /*
  26  * Include common defines/options for all AMCC eval boards
  27  */
  28 #define CONFIG_HOSTNAME         acadia
  29 #include "amcc-common.h"
  30
  31 /* Detect Acadia PLL input clock automatically via CPLD bit             */
  32 #define CONFIG_SYS_CLK_FREQ    ((in8(CONFIG_SYS_CPLD_BASE + 0) == 0x0c) ? \
  33                                 66666666 : 33333000)
  34
  35 #define CONFIG_MISC_INIT_F      1               /* Call misc_init_f     */
  36
  37 #define CONFIG_NO_SERIAL_EEPROM
  38 /*#undef CONFIG_NO_SERIAL_EEPROM*/
  39
  40 #ifdef CONFIG_NO_SERIAL_EEPROM
  41 /*----------------------------------------------------------------------------
  42  * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
  43  * assuming a 66MHz input clock to the 405EZ.
  44  *---------------------------------------------------------------------------*/
  45 /* #define PLLMR0_100_100_12 */
  46 #define PLLMR0_200_133_66
  47 /* #define PLLMR0_266_160_80 */
  48 /* #define PLLMR0_333_166_83 */
  49 #endif
  50
  51 /*-----------------------------------------------------------------------
  52  * Base addresses -- Note these are effective addresses where the
  53  * actual resources get mapped (not physical addresses)
  54  *----------------------------------------------------------------------*/
  55 #define CONFIG_SYS_FLASH_BASE           0xfe000000
  56 #define CONFIG_SYS_CPLD_BASE            0x80000000
  57 #define CONFIG_SYS_NAND_ADDR            0xd0000000
  58 #define CONFIG_SYS_USB_HOST             0xef603000      /* USB OHCI 1.1 controller      */
  59
  60 /*-----------------------------------------------------------------------
  61  * Initial RAM & stack pointer
  62  *----------------------------------------------------------------------*/
  63 #define CONFIG_SYS_TEMP_STACK_OCM       1               /* OCM as init ram      */
  64
  65 /* On Chip Memory location */
  66 #define CONFIG_SYS_OCM_DATA_ADDR        0xf8000000
  67 #define CONFIG_SYS_OCM_DATA_SIZE        0x4000                  /* 16K of onchip SRAM           */
  68 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR        /* inside of SRAM               */
  69 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE        /* Size of used area in RAM     */
  70
  71 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  72 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  73
  74 /*-----------------------------------------------------------------------
  75  * Serial Port
  76  *----------------------------------------------------------------------*/
  77 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
  78 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK                     /* external serial clock */
  79 #define CONFIG_SYS_BASE_BAUD            691200
  80
  81 /*-----------------------------------------------------------------------
  82  * Environment
  83  *----------------------------------------------------------------------*/
  84 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
  85
  86 /*-----------------------------------------------------------------------
  87  * FLASH related
  88  *----------------------------------------------------------------------*/
  89 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
  90 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
  91
  92 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
  93 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
  94 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
  95
  96 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
  97 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
  98
  99 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 100 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 101
 102 #ifdef CONFIG_ENV_IS_IN_FLASH
 103 #define CONFIG_ENV_SECT_SIZE    0x40000 /* size of one complete sector  */
 104 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 105 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 106
 107 /* Address and size of Redundant Environment Sector     */
 108 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 109 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 110 #endif
 111
 112 /*-----------------------------------------------------------------------
 113  * RAM (CRAM)
 114  *----------------------------------------------------------------------*/
 115 #define CONFIG_SYS_MBYTES_RAM           64              /* 64MB                 */
 116
 117 /*-----------------------------------------------------------------------
 118  * I2C
 119  *----------------------------------------------------------------------*/
 120 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 121
 122 #define CONFIG_SYS_I2C_EEPROM_ADDR      (0xa8>>1)
 123 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 124 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 125 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 126
 127 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 128 #define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
 129 #define CONFIG_DTT_AD7414       1               /* use AD7414           */
 130 #define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
 131 #define CONFIG_SYS_DTT_MAX_TEMP 70
 132 #define CONFIG_SYS_DTT_LOW_TEMP -30
 133 #define CONFIG_SYS_DTT_HYSTERESIS       3
 134
 135 /*-----------------------------------------------------------------------
 136  * Ethernet
 137  *----------------------------------------------------------------------*/
 138 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
 139 #define CONFIG_HAS_ETH0         1
 140
 141 /*
 142  * Default environment variables
 143  */
 144 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 145         CONFIG_AMCC_DEF_ENV                                             \
 146         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 147         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
 148         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 149         "kernel_addr=fff10000\0"                                        \
 150         "ramdisk_addr=fff20000\0"                                       \
 151         "kozio=bootm ffc60000\0"                                        \
 152         ""
 153
 154 #define CONFIG_USB_OHCI
 155
 156 /* Partitions */
 157 #define CONFIG_ISO_PARTITION
 158
 159 #define CONFIG_SUPPORT_VFAT
 160
 161 /*
 162  * Commands additional to the ones defined in amcc-common.h
 163  */
 164 #define CONFIG_CMD_DTT
 165 #define CONFIG_CMD_NAND
 166
 167 /*-----------------------------------------------------------------------
 168  * NAND FLASH
 169  *----------------------------------------------------------------------*/
 170 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 171 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 172 #define CONFIG_SYS_NAND_SELECT_DEVICE  1        /* nand driver supports mutipl. chips   */
 173
 174 /*-----------------------------------------------------------------------
 175  * External Bus Controller (EBC) Setup
 176  *----------------------------------------------------------------------*/
 177 #define CONFIG_SYS_NAND_CS              3
 178 /* Memory Bank 0 (Flash) initialization                                         */
 179 #define CONFIG_SYS_EBC_PB0AP            0x03337200
 180 #define CONFIG_SYS_EBC_PB0CR            0xfe0bc000
 181
 182 /* Memory Bank 3 (NAND-FLASH) initialization                                    */
 183 #define CONFIG_SYS_EBC_PB3AP            0x018003c0
 184 #define CONFIG_SYS_EBC_PB3CR            (CONFIG_SYS_NAND_ADDR | 0x1c000)
 185
 186 /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
 187 /* Memory Bank 1 (CRAM) initialization                                          */
 188 #define CONFIG_SYS_EBC_PB1AP            0x030400c0
 189 #define CONFIG_SYS_EBC_PB1CR            0x000bc000
 190
 191 /* Memory Bank 2 (CRAM) initialization                                          */
 192 #define CONFIG_SYS_EBC_PB2AP            0x030400c0
 193 #define CONFIG_SYS_EBC_PB2CR            0x020bc000
 194
 195 /* Memory Bank 4 (CPLD) initialization                                          */
 196 #define CONFIG_SYS_EBC_PB4AP            0x04006000
 197 #define CONFIG_SYS_EBC_PB4CR            (CONFIG_SYS_CPLD_BASE | 0x18000)
 198
 199 #define CONFIG_SYS_EBC_CFG              0xf8400000
 200
 201 /*-----------------------------------------------------------------------
 202  * GPIO Setup
 203  *----------------------------------------------------------------------*/
 204 #define CONFIG_SYS_GPIO_CRAM_CLK        8
 205 #define CONFIG_SYS_GPIO_CRAM_WAIT       9               /* GPIO-In              */
 206 #define CONFIG_SYS_GPIO_CRAM_ADV        10
 207 #define CONFIG_SYS_GPIO_CRAM_CRE        (32 + 21)       /* GPIO-Out             */
 208
 209 /*-----------------------------------------------------------------------
 210  * Definitions for GPIO_0 setup (PPC405EZ specific)
 211  *
 212  * GPIO0[0-2]   - External Bus Controller CS_4 - CS_6 Outputs
 213  * GPIO0[3]     - NAND FLASH Controller CE3 (NFCE3) Output
 214  * GPIO0[4]     - External Bus Controller Hold Input
 215  * GPIO0[5]     - External Bus Controller Priority Input
 216  * GPIO0[6]     - External Bus Controller HLDA Output
 217  * GPIO0[7]     - External Bus Controller Bus Request Output
 218  * GPIO0[8]     - CRAM Clk Output
 219  * GPIO0[9]     - External Bus Controller Ready Input
 220  * GPIO0[10]    - CRAM Adv Output
 221  * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled
 222  * GPIO0[25]    - External DMA Request Input
 223  * GPIO0[26]    - External DMA EOT I/O
 224  * GPIO0[25]    - External DMA Ack_n Output
 225  * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
 226  * GPIO0[28-30] - Trace Outputs / PWM Inputs
 227  * GPIO0[31]    - PWM_8 I/O
 228  */
 229 #define CONFIG_SYS_GPIO0_TCR            0xC0A00000
 230 #define CONFIG_SYS_GPIO0_OSRL           0x50004400
 231 #define CONFIG_SYS_GPIO0_OSRH           0x02000055
 232 #define CONFIG_SYS_GPIO0_ISR1L          0x00001000
 233 #define CONFIG_SYS_GPIO0_ISR1H          0x00000055
 234 #define CONFIG_SYS_GPIO0_TSRL           0x02000000
 235 #define CONFIG_SYS_GPIO0_TSRH           0x00000055
 236
 237 /*-----------------------------------------------------------------------
 238  * Definitions for GPIO_1 setup (PPC405EZ specific)
 239  *
 240  * GPIO1[0-6]   - PWM_9 to PWM_15 I/O
 241  * GPIO1[7]     - PWM_DIV_CLK (Out) / IRQ4 Input
 242  * GPIO1[8]     - TS5 Output / DAC_IP_TRIG Input
 243  * GPIO1[9]     - TS6 Output / ADC_IP_TRIG Input
 244  * GPIO1[10-12] - UART0 Control Inputs
 245  * GPIO1[13]    - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
 246  * GPIO1[14]    - UART0_RTS_N Output/SPI_SS_2_N Output
 247  * GPIO1[15]    - SPI_SS_3_N Output/UART0_RI_N Input
 248  * GPIO1[16]    - SPI_SS_1_N Output
 249  * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
 250  */
 251 #define CONFIG_SYS_GPIO1_TCR            0xFFFF8414
 252 #define CONFIG_SYS_GPIO1_OSRL           0x40000110
 253 #define CONFIG_SYS_GPIO1_OSRH           0x55455555
 254 #define CONFIG_SYS_GPIO1_ISR1L          0x15555445
 255 #define CONFIG_SYS_GPIO1_ISR1H          0x00000000
 256 #define CONFIG_SYS_GPIO1_TSRL           0x00000000
 257 #define CONFIG_SYS_GPIO1_TSRH           0x00000000
 258
 259 #endif  /* __CONFIG_H */