include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T4240 RDB board configuration file
   8  */
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_FSL_SATA_V2
  13 #define CONFIG_PCIE4
  14
  15 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  19 #ifndef CONFIG_SDCARD
  20 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  22 #else
  23 #define CONFIG_SPL_FLUSH_IMAGE
  24 #define CONFIG_SPL_PAD_TO               0x40000
  25 #define CONFIG_SPL_MAX_SIZE             0x28000
  26 #define RESET_VECTOR_OFFSET             0x27FFC
  27 #define BOOT_PAGE_OFFSET                0x27000
  28
  29 #ifdef  CONFIG_SDCARD
  30 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  31 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  32 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  33 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  34 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  35 #ifndef CONFIG_SPL_BUILD
  36 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  37 #endif
  38 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
  39 #endif
  40
  41 #ifdef CONFIG_SPL_BUILD
  42 #define CONFIG_SPL_SKIP_RELOCATE
  43 #define CONFIG_SPL_COMMON_INIT_DDR
  44 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  45 #endif
  46
  47 #endif
  48 #endif /* CONFIG_RAMBOOT_PBL */
  49
  50 #define CONFIG_DDR_ECC
  51
  52 /* High Level Configuration Options */
  53 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  54
  55 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  56 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  57 #endif
  58
  59 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  60 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  61 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  62 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  63 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 /*
  69  * These can be toggled for performance analysis, otherwise use default.
  70  */
  71 #define CONFIG_SYS_CACHE_STASHING
  72 #define CONFIG_BTB                      /* toggle branch predition */
  73 #ifdef CONFIG_DDR_ECC
  74 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  75 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  76 #endif
  77
  78 #define CONFIG_ENABLE_36BIT_PHYS
  79
  80 #define CONFIG_ADDR_MAP
  81 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  82
  83 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  84 #define CONFIG_SYS_MEMTEST_END          0x00400000
  85
  86 /*
  87  *  Config the L3 Cache as L3 SRAM
  88  */
  89 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  90 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  91 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  92 #ifdef CONFIG_RAMBOOT_PBL
  93 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
  94 #endif
  95 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
  96 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
  97 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
  98
  99 #define CONFIG_SYS_DCSRBAR              0xf0000000
 100 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 101
 102 /*
 103  * DDR Setup
 104  */
 105 #define CONFIG_VERY_BIG_RAM
 106 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 107 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 108
 109 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 110 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 111
 112 #define CONFIG_DDR_SPD
 113
 114 /*
 115  * IFC Definitions
 116  */
 117 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 118 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 119
 120 #ifdef CONFIG_SPL_BUILD
 121 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 122 #else
 123 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 124 #endif
 125
 126 #define CONFIG_HWCONFIG
 127
 128 /* define to use L1 as initial stack */
 129 #define CONFIG_L1_INIT_RAM
 130 #define CONFIG_SYS_INIT_RAM_LOCK
 131 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 132 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 133 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 134 /* The assembler doesn't like typecast */
 135 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 136         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 137           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 138 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 139
 140 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 141                                         GENERATED_GBL_DATA_SIZE)
 142 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 143
 144 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 145 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 146
 147 /* Serial Port - controlled on board with jumper J8
 148  * open - index 2
 149  * shorted - index 1
 150  */
 151 #define CONFIG_SYS_NS16550_SERIAL
 152 #define CONFIG_SYS_NS16550_REG_SIZE     1
 153 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 154
 155 #define CONFIG_SYS_BAUDRATE_TABLE       \
 156         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 157
 158 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 159 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 160 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 161 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 162
 163 /* I2C */
 164 #define CONFIG_SYS_I2C
 165 #define CONFIG_SYS_I2C_FSL
 166 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 167 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 168 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 169 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 170
 171 /*
 172  * General PCI
 173  * Memory space is mapped 1-1, but I/O space must start from 0.
 174  */
 175
 176 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 177 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 178 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 179 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 180 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 181
 182 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 183 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 184 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 185 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 186 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 187
 188 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 189 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 190 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 191 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 192 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 193
 194 /* controller 4, Base address 203000 */
 195 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 196 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 197 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 198
 199 #ifdef CONFIG_PCI
 200 #if !defined(CONFIG_DM_PCI)
 201 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 202 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 203 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 204 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 205 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 206 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 207 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 208 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 209 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 210 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 211 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 212 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 213 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 214 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 215 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 216 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 217 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 218 #define CONFIG_PCI_INDIRECT_BRIDGE
 219 #endif
 220
 221 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 222 #endif  /* CONFIG_PCI */
 223
 224 /* SATA */
 225 #ifdef CONFIG_FSL_SATA_V2
 226 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 227 #define CONFIG_SATA1
 228 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 229 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 230 #define CONFIG_SATA2
 231 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 232 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 233
 234 #define CONFIG_LBA48
 235 #endif
 236
 237 #ifdef CONFIG_FMAN_ENET
 238 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 239 #endif
 240
 241 /*
 242  * Environment
 243  */
 244 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 245 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 246
 247 /*
 248  * Command line configuration.
 249  */
 250
 251 /*
 252  * Miscellaneous configurable options
 253  */
 254 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 255
 256 /*
 257  * For booting Linux, the board info and command line data
 258  * have to be in the first 64 MB of memory, since this is
 259  * the maximum mapped by the Linux kernel during initialization.
 260  */
 261 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 262 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 263
 264 #ifdef CONFIG_CMD_KGDB
 265 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 266 #endif
 267
 268 /*
 269  * Environment Configuration
 270  */
 271 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 272 #define CONFIG_BOOTFILE         "uImage"
 273 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 274
 275 /* default location for tftp and bootm */
 276 #define CONFIG_LOADADDR         1000000
 277
 278 #define CONFIG_HVBOOT                                   \
 279         "setenv bootargs config-addr=0x60000000; "      \
 280         "bootm 0x01000000 - 0x00f00000"
 281
 282 #if defined(CONFIG_SPIFLASH)
 283 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 284 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 285 #define CONFIG_ENV_SECT_SIZE            0x10000
 286 #elif defined(CONFIG_SDCARD)
 287 #define CONFIG_SYS_MMC_ENV_DEV          0
 288 #define CONFIG_ENV_SIZE                 0x2000
 289 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 290 #elif defined(CONFIG_NAND)
 291 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 292 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 293 #elif defined(CONFIG_ENV_IS_NOWHERE)
 294 #define CONFIG_ENV_SIZE         0x2000
 295 #else
 296 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 297 #define CONFIG_ENV_SIZE         0x2000
 298 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 299 #endif
 300
 301 #define CONFIG_SYS_CLK_FREQ     66666666
 302 #define CONFIG_DDR_CLK_FREQ     133333333
 303
 304 #ifndef __ASSEMBLY__
 305 unsigned long get_board_sys_clk(void);
 306 unsigned long get_board_ddr_clk(void);
 307 #endif
 308
 309 /*
 310  * DDR Setup
 311  */
 312 #define CONFIG_SYS_SPD_BUS_NUM  0
 313 #define SPD_EEPROM_ADDRESS1     0x52
 314 #define SPD_EEPROM_ADDRESS2     0x54
 315 #define SPD_EEPROM_ADDRESS3     0x56
 316 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 317 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 318
 319 /*
 320  * IFC Definitions
 321  */
 322 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 323 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 324                                 + 0x8000000) | \
 325                                 CSPR_PORT_SIZE_16 | \
 326                                 CSPR_MSEL_NOR | \
 327                                 CSPR_V)
 328 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 329 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 330                                 CSPR_PORT_SIZE_16 | \
 331                                 CSPR_MSEL_NOR | \
 332                                 CSPR_V)
 333 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 334 /* NOR Flash Timing Params */
 335 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 336
 337 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 338                                 FTIM0_NOR_TEADC(0x5) | \
 339                                 FTIM0_NOR_TEAHC(0x5))
 340 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 341                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 342                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 343 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 344                                 FTIM2_NOR_TCH(0x4) | \
 345                                 FTIM2_NOR_TWPH(0x0E) | \
 346                                 FTIM2_NOR_TWP(0x1c))
 347 #define CONFIG_SYS_NOR_FTIM3    0x0
 348
 349 #define CONFIG_SYS_FLASH_QUIET_TEST
 350 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 351
 352 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 353 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 354 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 355 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 356
 357 #define CONFIG_SYS_FLASH_EMPTY_INFO
 358 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 359                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 360
 361 /* NAND Flash on IFC */
 362 #define CONFIG_NAND_FSL_IFC
 363 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 364 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 365 #define CONFIG_SYS_NAND_BASE            0xff800000
 366 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 367
 368 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 369 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 370                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 371                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 372                                 | CSPR_V)
 373 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 374
 375 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 376                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 377                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 378                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 379                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 380                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 381                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 382
 383 #define CONFIG_SYS_NAND_ONFI_DETECTION
 384
 385 /* ONFI NAND Flash mode0 Timing Params */
 386 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 387                                         FTIM0_NAND_TWP(0x18)   | \
 388                                         FTIM0_NAND_TWCHT(0x07) | \
 389                                         FTIM0_NAND_TWH(0x0a))
 390 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 391                                         FTIM1_NAND_TWBE(0x39)  | \
 392                                         FTIM1_NAND_TRR(0x0e)   | \
 393                                         FTIM1_NAND_TRP(0x18))
 394 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 395                                         FTIM2_NAND_TREH(0x0a) | \
 396                                         FTIM2_NAND_TWHRE(0x1e))
 397 #define CONFIG_SYS_NAND_FTIM3           0x0
 398
 399 #define CONFIG_SYS_NAND_DDR_LAW         11
 400 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 401 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 402
 403 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 404
 405 #if defined(CONFIG_NAND)
 406 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 407 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 408 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 409 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 410 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 411 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 412 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 413 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 414 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 415 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 416 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 417 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 418 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 419 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 420 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 421 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 422 #else
 423 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 424 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 425 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 426 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 427 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 428 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 429 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 430 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 431 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 432 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 433 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 434 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 435 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 436 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 437 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 438 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 439 #endif
 440 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 441 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 442 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 443 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 444 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 445 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 446 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 447 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 448
 449 /* CPLD on IFC */
 450 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 451 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 452 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 453 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 454                                 | CSPR_PORT_SIZE_8 \
 455                                 | CSPR_MSEL_GPCM \
 456                                 | CSPR_V)
 457
 458 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 459 #define CONFIG_SYS_CSOR3        0x0
 460
 461 /* CPLD Timing parameters for IFC CS3 */
 462 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 463                                         FTIM0_GPCM_TEADC(0x0e) | \
 464                                         FTIM0_GPCM_TEAHC(0x0e))
 465 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 466                                         FTIM1_GPCM_TRAD(0x1f))
 467 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 468                                         FTIM2_GPCM_TCH(0x8) | \
 469                                         FTIM2_GPCM_TWP(0x1f))
 470 #define CONFIG_SYS_CS3_FTIM3            0x0
 471
 472 #if defined(CONFIG_RAMBOOT_PBL)
 473 #define CONFIG_SYS_RAMBOOT
 474 #endif
 475
 476 /* I2C */
 477 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 478 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 479 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 480 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 481
 482 #define I2C_MUX_CH_DEFAULT      0x8
 483 #define I2C_MUX_CH_VOL_MONITOR  0xa
 484 #define I2C_MUX_CH_VSC3316_FS   0xc
 485 #define I2C_MUX_CH_VSC3316_BS   0xd
 486
 487 /* Voltage monitor on channel 2*/
 488 #define I2C_VOL_MONITOR_ADDR            0x40
 489 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 490 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 491 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 492
 493 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 494 #ifndef CONFIG_SPL_BUILD
 495 #define CONFIG_VID
 496 #endif
 497 #define CONFIG_VOL_MONITOR_IR36021_SET
 498 #define CONFIG_VOL_MONITOR_IR36021_READ
 499 /* The lowest and highest voltage allowed for T4240RDB */
 500 #define VDD_MV_MIN                      819
 501 #define VDD_MV_MAX                      1212
 502
 503 /*
 504  * eSPI - Enhanced SPI
 505  */
 506
 507 /* Qman/Bman */
 508 #ifndef CONFIG_NOBQFMAN
 509 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 510 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 511 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 512 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 513 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 514 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 515 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 516 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 517 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 518                                         CONFIG_SYS_BMAN_CENA_SIZE)
 519 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 520 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 521 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 522 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 523 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 524 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 525 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 526 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 527 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 528 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 529 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 530                                         CONFIG_SYS_QMAN_CENA_SIZE)
 531 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 532 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 533
 534 #define CONFIG_SYS_DPAA_FMAN
 535 #define CONFIG_SYS_DPAA_PME
 536 #define CONFIG_SYS_PMAN
 537 #define CONFIG_SYS_DPAA_DCE
 538 #define CONFIG_SYS_DPAA_RMAN
 539 #define CONFIG_SYS_INTERLAKEN
 540
 541 /* Default address of microcode for the Linux Fman driver */
 542 #if defined(CONFIG_SPIFLASH)
 543 /*
 544  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 545  * env, so we got 0x110000.
 546  */
 547 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 548 #elif defined(CONFIG_SDCARD)
 549 /*
 550  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 551  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 552  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 553  */
 554 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 555 #elif defined(CONFIG_NAND)
 556 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 557 #else
 558 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 559 #endif
 560 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 561 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 562 #endif /* CONFIG_NOBQFMAN */
 563
 564 #ifdef CONFIG_SYS_DPAA_FMAN
 565 #define CONFIG_PHYLIB_10G
 566 #define CONFIG_PHY_VITESSE
 567 #define CONFIG_PHY_CORTINA
 568 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 569 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 570 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 571 #define CONFIG_PHY_TERANETICS
 572 #define SGMII_PHY_ADDR1 0x0
 573 #define SGMII_PHY_ADDR2 0x1
 574 #define SGMII_PHY_ADDR3 0x2
 575 #define SGMII_PHY_ADDR4 0x3
 576 #define SGMII_PHY_ADDR5 0x4
 577 #define SGMII_PHY_ADDR6 0x5
 578 #define SGMII_PHY_ADDR7 0x6
 579 #define SGMII_PHY_ADDR8 0x7
 580 #define FM1_10GEC1_PHY_ADDR     0x10
 581 #define FM1_10GEC2_PHY_ADDR     0x11
 582 #define FM2_10GEC1_PHY_ADDR     0x12
 583 #define FM2_10GEC2_PHY_ADDR     0x13
 584 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 585 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 586 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 587 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 588 #endif
 589
 590 /* SATA */
 591 #ifdef CONFIG_FSL_SATA_V2
 592 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 593 #define CONFIG_SATA1
 594 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 595 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 596 #define CONFIG_SATA2
 597 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 598 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 599
 600 #define CONFIG_LBA48
 601 #endif
 602
 603 #ifdef CONFIG_FMAN_ENET
 604 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 605 #endif
 606
 607 /*
 608 * USB
 609 */
 610 #define CONFIG_USB_EHCI_FSL
 611 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 612 #define CONFIG_HAS_FSL_DR_USB
 613
 614 #ifdef CONFIG_MMC
 615 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 616 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 617 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 618 #endif
 619
 620
 621 #define __USB_PHY_TYPE  utmi
 622
 623 /*
 624  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 625  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 626  * interleaving. It can be cacheline, page, bank, superbank.
 627  * See doc/README.fsl-ddr for details.
 628  */
 629 #ifdef CONFIG_ARCH_T4240
 630 #define CTRL_INTLV_PREFERED 3way_4KB
 631 #else
 632 #define CTRL_INTLV_PREFERED cacheline
 633 #endif
 634
 635 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 636         "hwconfig=fsl_ddr:"                                     \
 637         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 638         "bank_intlv=auto;"                                      \
 639         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 640         "netdev=eth0\0"                                         \
 641         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 642         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 643         "tftpflash=tftpboot $loadaddr $uboot && "               \
 644         "protect off $ubootaddr +$filesize && "                 \
 645         "erase $ubootaddr +$filesize && "                       \
 646         "cp.b $loadaddr $ubootaddr $filesize && "               \
 647         "protect on $ubootaddr +$filesize && "                  \
 648         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 649         "consoledev=ttyS0\0"                                    \
 650         "ramdiskaddr=2000000\0"                                 \
 651         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 652         "fdtaddr=1e00000\0"                                     \
 653         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 654         "bdev=sda3\0"
 655
 656 #define CONFIG_HVBOOT                                   \
 657         "setenv bootargs config-addr=0x60000000; "      \
 658         "bootm 0x01000000 - 0x00f00000"
 659
 660 #define CONFIG_LINUX                                    \
 661         "setenv bootargs root=/dev/ram rw "             \
 662         "console=$consoledev,$baudrate $othbootargs;"   \
 663         "setenv ramdiskaddr 0x02000000;"                \
 664         "setenv fdtaddr 0x00c00000;"                    \
 665         "setenv loadaddr 0x1000000;"                    \
 666         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 667
 668 #define CONFIG_HDBOOT                                   \
 669         "setenv bootargs root=/dev/$bdev rw "           \
 670         "console=$consoledev,$baudrate $othbootargs;"   \
 671         "tftp $loadaddr $bootfile;"                     \
 672         "tftp $fdtaddr $fdtfile;"                       \
 673         "bootm $loadaddr - $fdtaddr"
 674
 675 #define CONFIG_NFSBOOTCOMMAND                   \
 676         "setenv bootargs root=/dev/nfs rw "     \
 677         "nfsroot=$serverip:$rootpath "          \
 678         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 679         "console=$consoledev,$baudrate $othbootargs;"   \
 680         "tftp $loadaddr $bootfile;"             \
 681         "tftp $fdtaddr $fdtfile;"               \
 682         "bootm $loadaddr - $fdtaddr"
 683
 684 #define CONFIG_RAMBOOTCOMMAND                           \
 685         "setenv bootargs root=/dev/ram rw "             \
 686         "console=$consoledev,$baudrate $othbootargs;"   \
 687         "tftp $ramdiskaddr $ramdiskfile;"               \
 688         "tftp $loadaddr $bootfile;"                     \
 689         "tftp $fdtaddr $fdtfile;"                       \
 690         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 691
 692 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 693
 694 #include <asm/fsl_secure_boot.h>
 695
 696 #endif  /* __CONFIG_H */