include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_BOOKE
  16 #define CONFIG_E500                     /* BOOKE e500 family */
  17 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  18 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  19 #define CONFIG_MP                       /* support multiple processors */
  20 #define CONFIG_ENABLE_36BIT_PHYS
  21
  22 #ifdef CONFIG_PHYS_64BIT
  23 #define CONFIG_ADDR_MAP         1
  24 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  25 #endif
  26
  27 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  28 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  29 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  30
  31 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  32 #define CONFIG_ENV_OVERWRITE
  33
  34 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  35
  36 /* support deep sleep */
  37 #ifdef CONFIG_PPC_T1024
  38 #define CONFIG_DEEP_SLEEP
  39 #endif
  40 #if defined(CONFIG_DEEP_SLEEP)
  41 #define CONFIG_BOARD_EARLY_INIT_F
  42 #endif
  43
  44 #ifdef CONFIG_RAMBOOT_PBL
  45 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  46 #define CONFIG_SPL_FLUSH_IMAGE
  47 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  48 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  49 #define CONFIG_SYS_TEXT_BASE            0x30001000
  50 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  51 #define CONFIG_SPL_PAD_TO               0x40000
  52 #define CONFIG_SPL_MAX_SIZE             0x28000
  53 #define RESET_VECTOR_OFFSET             0x27FFC
  54 #define BOOT_PAGE_OFFSET                0x27000
  55 #ifdef CONFIG_SPL_BUILD
  56 #define CONFIG_SPL_SKIP_RELOCATE
  57 #define CONFIG_SPL_COMMON_INIT_DDR
  58 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  59 #define CONFIG_SYS_NO_FLASH
  60 #endif
  61
  62 #ifdef CONFIG_NAND
  63 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  64 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  65 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  66 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  67 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  68 #if defined(CONFIG_T1024RDB)
  69 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  70 #elif defined(CONFIG_T1023RDB)
  71 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  72 #endif
  73 #define CONFIG_SPL_NAND_BOOT
  74 #endif
  75
  76 #ifdef CONFIG_SPIFLASH
  77 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  78 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  83 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  84 #ifndef CONFIG_SPL_BUILD
  85 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  86 #endif
  87 #if defined(CONFIG_T1024RDB)
  88 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  89 #elif defined(CONFIG_T1023RDB)
  90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  91 #endif
  92 #define CONFIG_SPL_SPI_BOOT
  93 #endif
  94
  95 #ifdef CONFIG_SDCARD
  96 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  97 #define CONFIG_SPL_MMC_MINIMAL
  98 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  99 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 100 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 101 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 102 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 103 #ifndef CONFIG_SPL_BUILD
 104 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 105 #endif
 106 #if defined(CONFIG_T1024RDB)
 107 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
 108 #elif defined(CONFIG_T1023RDB)
 109 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
 110 #endif
 111 #define CONFIG_SPL_MMC_BOOT
 112 #endif
 113
 114 #endif /* CONFIG_RAMBOOT_PBL */
 115
 116 #ifndef CONFIG_SYS_TEXT_BASE
 117 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 118 #endif
 119
 120 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 121 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 122 #endif
 123
 124 #ifndef CONFIG_SYS_NO_FLASH
 125 #define CONFIG_FLASH_CFI_DRIVER
 126 #define CONFIG_SYS_FLASH_CFI
 127 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 128 #endif
 129
 130 /* PCIe Boot - Master */
 131 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 132 /*
 133  * for slave u-boot IMAGE instored in master memory space,
 134  * PHYS must be aligned based on the SIZE
 135  */
 136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 138 #ifdef CONFIG_PHYS_64BIT
 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 140 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 141 #else
 142 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 143 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 144 #endif
 145 /*
 146  * for slave UCODE and ENV instored in master memory space,
 147  * PHYS must be aligned based on the SIZE
 148  */
 149 #ifdef CONFIG_PHYS_64BIT
 150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 152 #else
 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 154 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 155 #endif
 156 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 157 /* slave core release by master*/
 158 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 159 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 160
 161 /* PCIe Boot - Slave */
 162 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 164 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 165                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 166 /* Set 1M boot space for PCIe boot */
 167 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 168 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 169                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 170 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 171 #define CONFIG_SYS_NO_FLASH
 172 #endif
 173
 174 #if defined(CONFIG_SPIFLASH)
 175 #define CONFIG_SYS_EXTRA_ENV_RELOC
 176 #define CONFIG_ENV_IS_IN_SPI_FLASH
 177 #define CONFIG_ENV_SPI_BUS              0
 178 #define CONFIG_ENV_SPI_CS               0
 179 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 180 #define CONFIG_ENV_SPI_MODE             0
 181 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 182 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 183 #if defined(CONFIG_T1024RDB)
 184 #define CONFIG_ENV_SECT_SIZE            0x10000
 185 #elif defined(CONFIG_T1023RDB)
 186 #define CONFIG_ENV_SECT_SIZE            0x40000
 187 #endif
 188 #elif defined(CONFIG_SDCARD)
 189 #define CONFIG_SYS_EXTRA_ENV_RELOC
 190 #define CONFIG_ENV_IS_IN_MMC
 191 #define CONFIG_SYS_MMC_ENV_DEV          0
 192 #define CONFIG_ENV_SIZE                 0x2000
 193 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 194 #elif defined(CONFIG_NAND)
 195 #define CONFIG_SYS_EXTRA_ENV_RELOC
 196 #define CONFIG_ENV_IS_IN_NAND
 197 #define CONFIG_ENV_SIZE                 0x2000
 198 #if defined(CONFIG_T1024RDB)
 199 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 200 #elif defined(CONFIG_T1023RDB)
 201 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 202 #endif
 203 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 204 #define CONFIG_ENV_IS_IN_REMOTE
 205 #define CONFIG_ENV_ADDR         0xffe20000
 206 #define CONFIG_ENV_SIZE         0x2000
 207 #elif defined(CONFIG_ENV_IS_NOWHERE)
 208 #define CONFIG_ENV_SIZE         0x2000
 209 #else
 210 #define CONFIG_ENV_IS_IN_FLASH
 211 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 212 #define CONFIG_ENV_SIZE         0x2000
 213 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 214 #endif
 215
 216 #ifndef __ASSEMBLY__
 217 unsigned long get_board_sys_clk(void);
 218 unsigned long get_board_ddr_clk(void);
 219 #endif
 220
 221 #define CONFIG_SYS_CLK_FREQ     100000000
 222 #define CONFIG_DDR_CLK_FREQ     100000000
 223
 224 /*
 225  * These can be toggled for performance analysis, otherwise use default.
 226  */
 227 #define CONFIG_SYS_CACHE_STASHING
 228 #define CONFIG_BACKSIDE_L2_CACHE
 229 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 230 #define CONFIG_BTB                      /* toggle branch predition */
 231 #define CONFIG_DDR_ECC
 232 #ifdef CONFIG_DDR_ECC
 233 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 234 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 235 #endif
 236
 237 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 238 #define CONFIG_SYS_MEMTEST_END          0x00400000
 239 #define CONFIG_SYS_ALT_MEMTEST
 240 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 241
 242 /*
 243  *  Config the L3 Cache as L3 SRAM
 244  */
 245 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 246 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 247 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 248 #ifdef CONFIG_RAMBOOT_PBL
 249 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 250 #endif
 251 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 252 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 253 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 254 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 255
 256 #ifdef CONFIG_PHYS_64BIT
 257 #define CONFIG_SYS_DCSRBAR              0xf0000000
 258 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 259 #endif
 260
 261 /* EEPROM */
 262 #define CONFIG_ID_EEPROM
 263 #define CONFIG_SYS_I2C_EEPROM_NXID
 264 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 265 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 266 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 267 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 268 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 269
 270 /*
 271  * DDR Setup
 272  */
 273 #define CONFIG_VERY_BIG_RAM
 274 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 275 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 276 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 277 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 278 #define CONFIG_FSL_DDR_INTERACTIVE
 279 #if defined(CONFIG_T1024RDB)
 280 #define CONFIG_DDR_SPD
 281 #define CONFIG_SYS_FSL_DDR3
 282 #define CONFIG_SYS_SPD_BUS_NUM  0
 283 #define SPD_EEPROM_ADDRESS      0x51
 284 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 285 #elif defined(CONFIG_T1023RDB)
 286 #define CONFIG_SYS_FSL_DDR4
 287 #define CONFIG_SYS_DDR_RAW_TIMING
 288 #define CONFIG_SYS_SDRAM_SIZE   2048
 289 #endif
 290
 291 /*
 292  * IFC Definitions
 293  */
 294 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 295 #ifdef CONFIG_PHYS_64BIT
 296 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 297 #else
 298 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 299 #endif
 300
 301 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 302 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 303                                 CSPR_PORT_SIZE_16 | \
 304                                 CSPR_MSEL_NOR | \
 305                                 CSPR_V)
 306 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 307
 308 /* NOR Flash Timing Params */
 309 #if defined(CONFIG_T1024RDB)
 310 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 311 #elif defined(CONFIG_T1023RDB)
 312 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 313                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 314 #endif
 315 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 316                                 FTIM0_NOR_TEADC(0x5) | \
 317                                 FTIM0_NOR_TEAHC(0x5))
 318 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 319                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 320                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 321 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 322                                 FTIM2_NOR_TCH(0x4) | \
 323                                 FTIM2_NOR_TWPH(0x0E) | \
 324                                 FTIM2_NOR_TWP(0x1c))
 325 #define CONFIG_SYS_NOR_FTIM3    0x0
 326
 327 #define CONFIG_SYS_FLASH_QUIET_TEST
 328 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 329
 330 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 331 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 332 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 333 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 334
 335 #define CONFIG_SYS_FLASH_EMPTY_INFO
 336 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 337
 338 #ifdef CONFIG_T1024RDB
 339 /* CPLD on IFC */
 340 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 341 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 342 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 343 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 344                                                 | CSPR_PORT_SIZE_8 \
 345                                                 | CSPR_MSEL_GPCM \
 346                                                 | CSPR_V)
 347 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 348 #define CONFIG_SYS_CSOR2                0x0
 349
 350 /* CPLD Timing parameters for IFC CS2 */
 351 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 352                                                 FTIM0_GPCM_TEADC(0x0e) | \
 353                                                 FTIM0_GPCM_TEAHC(0x0e))
 354 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 355                                                 FTIM1_GPCM_TRAD(0x1f))
 356 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 357                                                 FTIM2_GPCM_TCH(0x8) | \
 358                                                 FTIM2_GPCM_TWP(0x1f))
 359 #define CONFIG_SYS_CS2_FTIM3            0x0
 360 #endif
 361
 362 /* NAND Flash on IFC */
 363 #define CONFIG_NAND_FSL_IFC
 364 #define CONFIG_SYS_NAND_BASE            0xff800000
 365 #ifdef CONFIG_PHYS_64BIT
 366 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 367 #else
 368 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 369 #endif
 370 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 371 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 372                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 373                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 374                                 | CSPR_V)
 375 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 376
 377 #if defined(CONFIG_T1024RDB)
 378 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 379                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 380                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 381                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 382                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 383                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 384                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 385 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 386 #elif defined(CONFIG_T1023RDB)
 387 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 388                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 389                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 390                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 391                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 392                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 393                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 394 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 395 #endif
 396
 397 #define CONFIG_SYS_NAND_ONFI_DETECTION
 398 /* ONFI NAND Flash mode0 Timing Params */
 399 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 400                                         FTIM0_NAND_TWP(0x18)   | \
 401                                         FTIM0_NAND_TWCHT(0x07) | \
 402                                         FTIM0_NAND_TWH(0x0a))
 403 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 404                                         FTIM1_NAND_TWBE(0x39)  | \
 405                                         FTIM1_NAND_TRR(0x0e)   | \
 406                                         FTIM1_NAND_TRP(0x18))
 407 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 408                                         FTIM2_NAND_TREH(0x0a) | \
 409                                         FTIM2_NAND_TWHRE(0x1e))
 410 #define CONFIG_SYS_NAND_FTIM3           0x0
 411
 412 #define CONFIG_SYS_NAND_DDR_LAW         11
 413 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 414 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 415 #define CONFIG_CMD_NAND
 416
 417 #if defined(CONFIG_NAND)
 418 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 419 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 420 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 421 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 422 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 423 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 424 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 425 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 426 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 427 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 428 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 429 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 430 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 431 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 432 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 433 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 434 #else
 435 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 436 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 437 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 438 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 439 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 440 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 441 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 442 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 443 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 444 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 445 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 446 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 447 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 448 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 449 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 450 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 451 #endif
 452
 453 #ifdef CONFIG_SPL_BUILD
 454 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 455 #else
 456 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 457 #endif
 458
 459 #if defined(CONFIG_RAMBOOT_PBL)
 460 #define CONFIG_SYS_RAMBOOT
 461 #endif
 462
 463 #define CONFIG_BOARD_EARLY_INIT_R
 464 #define CONFIG_MISC_INIT_R
 465
 466 #define CONFIG_HWCONFIG
 467
 468 /* define to use L1 as initial stack */
 469 #define CONFIG_L1_INIT_RAM
 470 #define CONFIG_SYS_INIT_RAM_LOCK
 471 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 472 #ifdef CONFIG_PHYS_64BIT
 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 475 /* The assembler doesn't like typecast */
 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 477         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 478           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 479 #else
 480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 481 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 483 #endif
 484 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 485
 486 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 487                                         GENERATED_GBL_DATA_SIZE)
 488 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 489
 490 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 491 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 492
 493 /* Serial Port */
 494 #define CONFIG_CONS_INDEX       1
 495 #define CONFIG_SYS_NS16550_SERIAL
 496 #define CONFIG_SYS_NS16550_REG_SIZE     1
 497 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 498
 499 #define CONFIG_SYS_BAUDRATE_TABLE       \
 500         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 501
 502 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 503 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 504 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 505 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 506
 507 /* Video */
 508 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 509 #ifdef CONFIG_FSL_DIU_FB
 510 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 511 #define CONFIG_CMD_BMP
 512 #define CONFIG_VIDEO_LOGO
 513 #define CONFIG_VIDEO_BMP_LOGO
 514 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 515 /*
 516  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 517  * disable empty flash sector detection, which is I/O-intensive.
 518  */
 519 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 520 #endif
 521
 522 /* I2C */
 523 #define CONFIG_SYS_I2C
 524 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 525 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 526 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 527 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 528 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 529 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 530 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 531
 532 #define I2C_PCA6408_BUS_NUM             1
 533 #define I2C_PCA6408_ADDR                0x20
 534
 535 /* I2C bus multiplexer */
 536 #define I2C_MUX_CH_DEFAULT      0x8
 537
 538 /*
 539  * RTC configuration
 540  */
 541 #define RTC
 542 #define CONFIG_RTC_DS1337       1
 543 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 544
 545 /*
 546  * eSPI - Enhanced SPI
 547  */
 548 #define CONFIG_SPI_FLASH_BAR
 549 #define CONFIG_SF_DEFAULT_SPEED 10000000
 550 #define CONFIG_SF_DEFAULT_MODE  0
 551
 552 /*
 553  * General PCIe
 554  * Memory space is mapped 1-1, but I/O space must start from 0.
 555  */
 556 #define CONFIG_PCI              /* Enable PCI/PCIE */
 557 #define CONFIG_PCIE1            /* PCIE controller 1 */
 558 #define CONFIG_PCIE2            /* PCIE controller 2 */
 559 #define CONFIG_PCIE3            /* PCIE controller 3 */
 560 #ifdef CONFIG_PPC_T1040
 561 #define CONFIG_PCIE4            /* PCIE controller 4 */
 562 #endif
 563 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 564 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 565 #define CONFIG_PCI_INDIRECT_BRIDGE
 566
 567 #ifdef CONFIG_PCI
 568 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 569 #ifdef CONFIG_PCIE1
 570 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 571 #ifdef CONFIG_PHYS_64BIT
 572 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 573 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 574 #else
 575 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 576 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 577 #endif
 578 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 579 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 580 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 581 #ifdef CONFIG_PHYS_64BIT
 582 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 583 #else
 584 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 585 #endif
 586 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 587 #endif
 588
 589 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 590 #ifdef CONFIG_PCIE2
 591 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 592 #ifdef CONFIG_PHYS_64BIT
 593 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 594 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 595 #else
 596 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 597 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 598 #endif
 599 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 600 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 601 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 602 #ifdef CONFIG_PHYS_64BIT
 603 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 604 #else
 605 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 606 #endif
 607 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 608 #endif
 609
 610 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 611 #ifdef CONFIG_PCIE3
 612 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 613 #ifdef CONFIG_PHYS_64BIT
 614 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 615 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 616 #else
 617 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 618 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 619 #endif
 620 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 621 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 622 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 623 #ifdef CONFIG_PHYS_64BIT
 624 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 625 #else
 626 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 627 #endif
 628 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 629 #endif
 630
 631 /* controller 4, Base address 203000, to be removed */
 632 #ifdef CONFIG_PCIE4
 633 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 634 #ifdef CONFIG_PHYS_64BIT
 635 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 636 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 637 #else
 638 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 639 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 640 #endif
 641 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 642 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 643 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 644 #ifdef CONFIG_PHYS_64BIT
 645 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 646 #else
 647 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 648 #endif
 649 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 650 #endif
 651
 652 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 653 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 654 #define CONFIG_DOS_PARTITION
 655 #endif  /* CONFIG_PCI */
 656
 657 /*
 658  * USB
 659  */
 660 #define CONFIG_HAS_FSL_DR_USB
 661
 662 #ifdef CONFIG_HAS_FSL_DR_USB
 663 #define CONFIG_USB_EHCI
 664 #define CONFIG_USB_EHCI_FSL
 665 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 666 #endif
 667
 668 /*
 669  * SDHC
 670  */
 671 #define CONFIG_MMC
 672 #ifdef CONFIG_MMC
 673 #define CONFIG_FSL_ESDHC
 674 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 675 #define CONFIG_GENERIC_MMC
 676 #define CONFIG_DOS_PARTITION
 677 #endif
 678
 679 /* Qman/Bman */
 680 #ifndef CONFIG_NOBQFMAN
 681 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 682 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 683 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 684 #ifdef CONFIG_PHYS_64BIT
 685 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 686 #else
 687 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 688 #endif
 689 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 690 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 691 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 692 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 693 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 694 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 695                                         CONFIG_SYS_BMAN_CENA_SIZE)
 696 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 697 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 698 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 699 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 700 #ifdef CONFIG_PHYS_64BIT
 701 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 702 #else
 703 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 704 #endif
 705 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 706 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 707 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 708 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 709 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 710 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 711                                         CONFIG_SYS_QMAN_CENA_SIZE)
 712 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 713 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 714
 715 #define CONFIG_SYS_DPAA_FMAN
 716
 717 #ifdef CONFIG_T1024RDB
 718 #define CONFIG_QE
 719 #define CONFIG_U_QE
 720 #endif
 721 /* Default address of microcode for the Linux FMan driver */
 722 #if defined(CONFIG_SPIFLASH)
 723 /*
 724  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 725  * env, so we got 0x110000.
 726  */
 727 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 728 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 729 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 730 #elif defined(CONFIG_SDCARD)
 731 /*
 732  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 733  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 734  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 735  */
 736 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 737 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 738 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 739 #elif defined(CONFIG_NAND)
 740 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 741 #if defined(CONFIG_T1024RDB)
 742 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 743 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 744 #elif defined(CONFIG_T1023RDB)
 745 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 746 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 747 #endif
 748 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 749 /*
 750  * Slave has no ucode locally, it can fetch this from remote. When implementing
 751  * in two corenet boards, slave's ucode could be stored in master's memory
 752  * space, the address can be mapped from slave TLB->slave LAW->
 753  * slave SRIO or PCIE outbound window->master inbound window->
 754  * master LAW->the ucode address in master's memory space.
 755  */
 756 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 757 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 758 #else
 759 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 760 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 761 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 762 #endif
 763 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 764 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 765 #endif /* CONFIG_NOBQFMAN */
 766
 767 #ifdef CONFIG_SYS_DPAA_FMAN
 768 #define CONFIG_FMAN_ENET
 769 #define CONFIG_PHYLIB_10G
 770 #define CONFIG_PHY_REALTEK
 771 #define CONFIG_PHY_AQUANTIA
 772 #if defined(CONFIG_T1024RDB)
 773 #define RGMII_PHY1_ADDR         0x2
 774 #define RGMII_PHY2_ADDR         0x6
 775 #define SGMII_AQR_PHY_ADDR      0x2
 776 #define FM1_10GEC1_PHY_ADDR     0x1
 777 #elif defined(CONFIG_T1023RDB)
 778 #define RGMII_PHY1_ADDR         0x1
 779 #define SGMII_RTK_PHY_ADDR      0x3
 780 #define SGMII_AQR_PHY_ADDR      0x2
 781 #endif
 782 #endif
 783
 784 #ifdef CONFIG_FMAN_ENET
 785 #define CONFIG_MII              /* MII PHY management */
 786 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 787 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 788 #endif
 789
 790 /*
 791  * Dynamic MTD Partition support with mtdparts
 792  */
 793 #ifndef CONFIG_SYS_NO_FLASH
 794 #define CONFIG_MTD_DEVICE
 795 #define CONFIG_MTD_PARTITIONS
 796 #define CONFIG_CMD_MTDPARTS
 797 #define CONFIG_FLASH_CFI_MTD
 798 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 799                         "spi0=spife110000.1"
 800 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 801                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 802                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 803                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 804 #endif
 805
 806 /*
 807  * Environment
 808  */
 809 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 810 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 811
 812 /*
 813  * Command line configuration.
 814  */
 815 #define CONFIG_CMD_DATE
 816 #define CONFIG_CMD_EEPROM
 817 #define CONFIG_CMD_ERRATA
 818 #define CONFIG_CMD_IRQ
 819 #define CONFIG_CMD_REGINFO
 820
 821 #ifdef CONFIG_PCI
 822 #define CONFIG_CMD_PCI
 823 #endif
 824
 825 /*
 826  * Miscellaneous configurable options
 827  */
 828 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 829 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 830 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 831 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 832 #ifdef CONFIG_CMD_KGDB
 833 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 834 #else
 835 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 836 #endif
 837 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 838 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 839 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 840
 841 /*
 842  * For booting Linux, the board info and command line data
 843  * have to be in the first 64 MB of memory, since this is
 844  * the maximum mapped by the Linux kernel during initialization.
 845  */
 846 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 847 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 848
 849 #ifdef CONFIG_CMD_KGDB
 850 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 851 #endif
 852
 853 /*
 854  * Environment Configuration
 855  */
 856 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 857 #define CONFIG_BOOTFILE         "uImage"
 858 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 859 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 860 #define CONFIG_BAUDRATE         115200
 861 #define __USB_PHY_TYPE          utmi
 862
 863 #ifdef CONFIG_PPC_T1024
 864 #define CONFIG_BOARDNAME t1024rdb
 865 #define BANK_INTLV cs0_cs1
 866 #else
 867 #define CONFIG_BOARDNAME t1023rdb
 868 #define BANK_INTLV  null
 869 #endif
 870
 871 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 872         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 873         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 874         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 875         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 876         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 877         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 878         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 879         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 880         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 881         "netdev=eth0\0"                                         \
 882         "tftpflash=tftpboot $loadaddr $uboot && "               \
 883         "protect off $ubootaddr +$filesize && "                 \
 884         "erase $ubootaddr +$filesize && "                       \
 885         "cp.b $loadaddr $ubootaddr $filesize && "               \
 886         "protect on $ubootaddr +$filesize && "                  \
 887         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 888         "consoledev=ttyS0\0"                                    \
 889         "ramdiskaddr=2000000\0"                                 \
 890         "fdtaddr=1e00000\0"                                     \
 891         "bdev=sda3\0"
 892
 893 #define CONFIG_LINUX                                    \
 894         "setenv bootargs root=/dev/ram rw "             \
 895         "console=$consoledev,$baudrate $othbootargs;"   \
 896         "setenv ramdiskaddr 0x02000000;"                \
 897         "setenv fdtaddr 0x00c00000;"                    \
 898         "setenv loadaddr 0x1000000;"                    \
 899         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 900
 901 #define CONFIG_NFSBOOTCOMMAND                   \
 902         "setenv bootargs root=/dev/nfs rw "     \
 903         "nfsroot=$serverip:$rootpath "          \
 904         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 905         "console=$consoledev,$baudrate $othbootargs;"   \
 906         "tftp $loadaddr $bootfile;"             \
 907         "tftp $fdtaddr $fdtfile;"               \
 908         "bootm $loadaddr - $fdtaddr"
 909
 910 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 911
 912 /* Hash command with SHA acceleration supported in hardware */
 913 #ifdef CONFIG_FSL_CAAM
 914 #define CONFIG_CMD_HASH
 915 #define CONFIG_SHA_HW_ACCEL
 916 #endif
 917
 918 #include <asm/fsl_secure_boot.h>
 919
 920 #endif  /* __T1024RDB_H */