include/configs/MPC8569MDS.h

   1 /*
   2  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8569mds board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /* High Level Configuration Options */
  14 #define CONFIG_BOOKE            1       /* BOOKE */
  15 #define CONFIG_E500             1       /* BOOKE e500 family */
  16
  17 #define CONFIG_FSL_ELBC         1       /* Has Enhance localbus controller */
  18
  19 #define CONFIG_SYS_SRIO
  20 #define CONFIG_SRIO1                    /* SRIO port 1 */
  21
  22 #define CONFIG_PCIE1            1       /* PCIE controller */
  23 #define CONFIG_FSL_PCI_INIT     1       /* use common fsl pci init code */
  24 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  25 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  26 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  27 #define CONFIG_QE                       /* Enable QE */
  28 #define CONFIG_ENV_OVERWRITE
  29
  30 #ifndef __ASSEMBLY__
  31 extern unsigned long get_clock_freq(void);
  32 #endif
  33 /* Replace a call to get_clock_freq (after it is implemented)*/
  34 #define CONFIG_SYS_CLK_FREQ     66666666
  35 #define CONFIG_DDR_CLK_FREQ     CONFIG_SYS_CLK_FREQ
  36
  37 #ifdef CONFIG_ATM
  38 #define CONFIG_PQ_MDS_PIB
  39 #define CONFIG_PQ_MDS_PIB_ATM
  40 #endif
  41
  42 /*
  43  * These can be toggled for performance analysis, otherwise use default.
  44  */
  45 #define CONFIG_L2_CACHE                         /* toggle L2 cache      */
  46 #define CONFIG_BTB                              /* toggle branch predition */
  47
  48 #ifndef CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  50 #endif
  51
  52 #ifndef CONFIG_SYS_MONITOR_BASE
  53 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  54 #endif
  55
  56 /*
  57  * Only possible on E500 Version 2 or newer cores.
  58  */
  59 #define CONFIG_ENABLE_36BIT_PHYS        1
  60
  61 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  62 #define CONFIG_BOARD_EARLY_INIT_R       1
  63 #define CONFIG_HWCONFIG
  64
  65 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  66 #define CONFIG_SYS_MEMTEST_END          0x00400000
  67
  68 /*
  69  * Config the L2 Cache as L2 SRAM
  70  */
  71 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  72 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  73 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  74 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  75
  76 #define CONFIG_SYS_CCSRBAR              0xe0000000
  77 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  78
  79 #if defined(CONFIG_NAND_SPL)
  80 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  81 #endif
  82
  83 /* DDR Setup */
  84 #define CONFIG_SYS_FSL_DDR3
  85 #undef CONFIG_FSL_DDR_INTERACTIVE
  86 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
  87 #define CONFIG_DDR_SPD
  88 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  89
  90 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  91
  92 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  93                                         /* DDR is system memory*/
  94 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  95
  96 #define CONFIG_NUM_DDR_CONTROLLERS      1
  97 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  98 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  99
 100 /* I2C addresses of SPD EEPROMs */
 101 #define SPD_EEPROM_ADDRESS    0x51    /* CTLR 0 DIMM 0 */
 102
 103 /* These are used when DDR doesn't use SPD.  */
 104 #define CONFIG_SYS_SDRAM_SIZE           1024            /* DDR is 1024MB */
 105 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 106 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 107 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 108 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 109 #define CONFIG_SYS_DDR_TIMING_1         0x6F6B4644
 110 #define CONFIG_SYS_DDR_TIMING_2         0x002888D0
 111 #define CONFIG_SYS_DDR_SDRAM_CFG        0x47000000
 112 #define CONFIG_SYS_DDR_SDRAM_CFG_2      0x04401040
 113 #define CONFIG_SYS_DDR_SDRAM_MODE       0x40401521
 114 #define CONFIG_SYS_DDR_SDRAM_MODE_2     0x8000C000
 115 #define CONFIG_SYS_DDR_SDRAM_INTERVAL   0x03E00000
 116 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 117 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   0x01000000
 118 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 119 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 120 #define CONFIG_SYS_DDR_ZQ_CNTL          0x89080600
 121 #define CONFIG_SYS_DDR_WRLVL_CNTL       0x0655A604
 122 #define CONFIG_SYS_DDR_CDR_1            0x80040000
 123 #define CONFIG_SYS_DDR_CDR_2            0x00000000
 124 #define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
 125 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 126 #define CONFIG_SYS_DDR_CONTROL          0xc7000000      /* Type = DDR3 */
 127 #define CONFIG_SYS_DDR_CONTROL2         0x24400000
 128
 129 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 130 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 131 #define CONFIG_SYS_DDR_SBE              0x00010000
 132
 133 #undef CONFIG_CLOCKS_IN_MHZ
 134
 135 /*
 136  * Local Bus Definitions
 137  */
 138
 139 #define CONFIG_SYS_FLASH_BASE           0xfe000000      /* start of FLASH 32M */
 140 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 141
 142 #define CONFIG_SYS_BCSR_BASE            0xf8000000
 143 #define CONFIG_SYS_BCSR_BASE_PHYS       CONFIG_SYS_BCSR_BASE
 144
 145 /*Chip select 0 - Flash*/
 146 #define CONFIG_FLASH_BR_PRELIM          0xfe000801
 147 #define CONFIG_FLASH_OR_PRELIM          0xfe000ff7
 148
 149 /*Chip select 1 - BCSR*/
 150 #define CONFIG_SYS_BR1_PRELIM           0xf8000801
 151 #define CONFIG_SYS_OR1_PRELIM           0xffffe9f7
 152
 153 /*Chip select 4 - PIB*/
 154 #define CONFIG_SYS_BR4_PRELIM           0xf8008801
 155 #define CONFIG_SYS_OR4_PRELIM           0xffffe9f7
 156
 157 /*Chip select 5 - PIB*/
 158 #define CONFIG_SYS_BR5_PRELIM           0xf8010801
 159 #define CONFIG_SYS_OR5_PRELIM           0xffffe9f7
 160
 161 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 162 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 163 #undef  CONFIG_SYS_FLASH_CHECKSUM
 164 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 165 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 166
 167 #undef CONFIG_SYS_RAMBOOT
 168
 169 #define CONFIG_FLASH_CFI_DRIVER
 170 #define CONFIG_SYS_FLASH_CFI
 171 #define CONFIG_SYS_FLASH_EMPTY_INFO
 172
 173 /* Chip select 3 - NAND */
 174 #ifndef CONFIG_NAND_SPL
 175 #define CONFIG_SYS_NAND_BASE            0xFC000000
 176 #else
 177 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 178 #endif
 179
 180 /* NAND boot: 4K NAND loader config */
 181 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 182 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
 183 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 184 #define CONFIG_SYS_NAND_U_BOOT_START \
 185         (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 186 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 187 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 188 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 189
 190 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 191 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE, }
 192 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 193 #define CONFIG_CMD_NAND                 1
 194 #define CONFIG_NAND_FSL_ELBC            1
 195 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 196 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE_PHYS \
 197                                 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
 198                                 | BR_PS_8            /* Port Size = 8 bit */ \
 199                                 | BR_MS_FCM          /* MSEL = FCM */ \
 200                                 | BR_V)              /* valid */
 201 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000          /* length 256K */ \
 202                                 | OR_FCM_CSCT \
 203                                 | OR_FCM_CST \
 204                                 | OR_FCM_CHT \
 205                                 | OR_FCM_SCY_1 \
 206                                 | OR_FCM_TRLX \
 207                                 | OR_FCM_EHTR)
 208
 209 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 210 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 211 #define CONFIG_SYS_BR3_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 212 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 213
 214 #define CONFIG_SYS_LBC_LCRR     0x00000004      /* LB clock ratio reg */
 215 #define CONFIG_SYS_LBC_LBCR     0x00040000      /* LB config reg */
 216 #define CONFIG_SYS_LBC_LSRT     0x20000000      /* LB sdram refresh timer */
 217 #define CONFIG_SYS_LBC_MRTPR    0x00000000      /* LB refresh timer prescal*/
 218
 219 #define CONFIG_SYS_INIT_RAM_LOCK        1
 220 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000  /* Initial RAM address */
 221 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000      /* Size of used area in RAM */
 222
 223 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 224                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 225 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 226
 227 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)    /* Reserve 256 kB for Mon */
 228 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 229
 230 /* Serial Port */
 231 #define CONFIG_CONS_INDEX               1
 232 #define CONFIG_SYS_NS16550_SERIAL
 233 #define CONFIG_SYS_NS16550_REG_SIZE    1
 234 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 235 #ifdef CONFIG_NAND_SPL
 236 #define CONFIG_NS16550_MIN_FUNCTIONS
 237 #endif
 238
 239 #define CONFIG_SYS_BAUDRATE_TABLE  \
 240         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 241
 242 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 243 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 244
 245 /*
 246  * I2C
 247  */
 248 #define CONFIG_SYS_I2C
 249 #define CONFIG_SYS_I2C_FSL
 250 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 251 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 252 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 253 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 254 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 255 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 256 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 257
 258 /*
 259  * I2C2 EEPROM
 260  */
 261 #define CONFIG_ID_EEPROM
 262 #ifdef CONFIG_ID_EEPROM
 263 #define CONFIG_SYS_I2C_EEPROM_NXID
 264 #endif
 265 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 266 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 267 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 268
 269 #define PLPPAR1_I2C_BIT_MASK            0x0000000F
 270 #define PLPPAR1_I2C2_VAL                0x00000000
 271 #define PLPPAR1_ESDHC_VAL               0x0000000A
 272 #define PLPDIR1_I2C_BIT_MASK            0x0000000F
 273 #define PLPDIR1_I2C2_VAL                0x0000000F
 274 #define PLPDIR1_ESDHC_VAL               0x00000006
 275 #define PLPPAR1_UART0_BIT_MASK          0x00000fc0
 276 #define PLPPAR1_ESDHC_4BITS_VAL         0x00000a80
 277 #define PLPDIR1_UART0_BIT_MASK          0x00000fc0
 278 #define PLPDIR1_ESDHC_4BITS_VAL         0x00000a80
 279
 280 /*
 281  * General PCI
 282  * Memory Addresses are mapped 1-1. I/O is mapped from 0
 283  */
 284 #define CONFIG_SYS_PCIE1_NAME           "Slot"
 285 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 286 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 287 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 288 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 289 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe2800000
 290 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 291 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe2800000
 292 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 293
 294 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xC0000000
 295 #define CONFIG_SYS_SRIO1_MEM_BUS        0xC0000000
 296 #define CONFIG_SYS_SRIO1_MEM_PHYS       CONFIG_SYS_SRIO1_MEM_BUS
 297 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x20000000      /* 512M */
 298
 299 #ifdef CONFIG_QE
 300 /*
 301  * QE UEC ethernet configuration
 302  */
 303 #define CONFIG_SYS_UCC_RGMII_MODE       /* Set UCC work at RGMII by default */
 304 #undef CONFIG_SYS_UCC_RMII_MODE         /* Set UCC work at RMII mode */
 305
 306 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 307 #define CONFIG_UEC_ETH
 308 #define CONFIG_ETHPRIME         "UEC0"
 309 #define CONFIG_PHY_MODE_NEED_CHANGE
 310
 311 #define CONFIG_UEC_ETH1         /* GETH1 */
 312 #define CONFIG_HAS_ETH0
 313
 314 #ifdef CONFIG_UEC_ETH1
 315 #define CONFIG_SYS_UEC1_UCC_NUM        0       /* UCC1 */
 316 #define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE
 317 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 318 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
 319 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 320 #define CONFIG_SYS_UEC1_PHY_ADDR       7
 321 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 322 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 323 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 324 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16 /* CLK16 for RMII */
 325 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 326 #define CONFIG_SYS_UEC1_PHY_ADDR       8        /* 0x8 for RMII */
 327 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 328 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 329 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 330 #endif /* CONFIG_UEC_ETH1 */
 331
 332 #define CONFIG_UEC_ETH2         /* GETH2 */
 333 #define CONFIG_HAS_ETH1
 334
 335 #ifdef CONFIG_UEC_ETH2
 336 #define CONFIG_SYS_UEC2_UCC_NUM        1       /* UCC2 */
 337 #define CONFIG_SYS_UEC2_RX_CLK         QE_CLK_NONE
 338 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 339 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK17
 340 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 341 #define CONFIG_SYS_UEC2_PHY_ADDR       1
 342 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 343 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 344 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 345 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16 /* CLK 16 for RMII */
 346 #define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
 347 #define CONFIG_SYS_UEC2_PHY_ADDR       0x9      /* 0x9 for RMII */
 348 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 349 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 350 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 351 #endif /* CONFIG_UEC_ETH2 */
 352
 353 #define CONFIG_UEC_ETH3         /* GETH3 */
 354 #define CONFIG_HAS_ETH2
 355
 356 #ifdef CONFIG_UEC_ETH3
 357 #define CONFIG_SYS_UEC3_UCC_NUM        2       /* UCC3 */
 358 #define CONFIG_SYS_UEC3_RX_CLK         QE_CLK_NONE
 359 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 360 #define CONFIG_SYS_UEC3_TX_CLK         QE_CLK12
 361 #define CONFIG_SYS_UEC3_ETH_TYPE       GIGA_ETH
 362 #define CONFIG_SYS_UEC3_PHY_ADDR       2
 363 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 364 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
 365 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 366 #define CONFIG_SYS_UEC3_TX_CLK          QE_CLK16 /* CLK_16 for RMII */
 367 #define CONFIG_SYS_UEC3_ETH_TYPE        FAST_ETH
 368 #define CONFIG_SYS_UEC3_PHY_ADDR        0xA     /* 0xA for RMII */
 369 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 370 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
 371 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 372 #endif /* CONFIG_UEC_ETH3 */
 373
 374 #define CONFIG_UEC_ETH4         /* GETH4 */
 375 #define CONFIG_HAS_ETH3
 376
 377 #ifdef CONFIG_UEC_ETH4
 378 #define CONFIG_SYS_UEC4_UCC_NUM        3       /* UCC4 */
 379 #define CONFIG_SYS_UEC4_RX_CLK         QE_CLK_NONE
 380 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 381 #define CONFIG_SYS_UEC4_TX_CLK         QE_CLK17
 382 #define CONFIG_SYS_UEC4_ETH_TYPE       GIGA_ETH
 383 #define CONFIG_SYS_UEC4_PHY_ADDR       3
 384 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 385 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
 386 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 387 #define CONFIG_SYS_UEC4_TX_CLK          QE_CLK16 /* CLK16 for RMII */
 388 #define CONFIG_SYS_UEC4_ETH_TYPE        FAST_ETH
 389 #define CONFIG_SYS_UEC4_PHY_ADDR        0xB     /* 0xB for RMII */
 390 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 391 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
 392 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 393 #endif /* CONFIG_UEC_ETH4 */
 394
 395 #undef CONFIG_UEC_ETH6         /* GETH6 */
 396 #define CONFIG_HAS_ETH5
 397
 398 #ifdef CONFIG_UEC_ETH6
 399 #define CONFIG_SYS_UEC6_UCC_NUM        5       /* UCC6 */
 400 #define CONFIG_SYS_UEC6_RX_CLK         QE_CLK_NONE
 401 #define CONFIG_SYS_UEC6_TX_CLK         QE_CLK_NONE
 402 #define CONFIG_SYS_UEC6_ETH_TYPE       GIGA_ETH
 403 #define CONFIG_SYS_UEC6_PHY_ADDR       4
 404 #define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 405 #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
 406 #endif /* CONFIG_UEC_ETH6 */
 407
 408 #undef CONFIG_UEC_ETH8         /* GETH8 */
 409 #define CONFIG_HAS_ETH7
 410
 411 #ifdef CONFIG_UEC_ETH8
 412 #define CONFIG_SYS_UEC8_UCC_NUM        7       /* UCC8 */
 413 #define CONFIG_SYS_UEC8_RX_CLK         QE_CLK_NONE
 414 #define CONFIG_SYS_UEC8_TX_CLK         QE_CLK_NONE
 415 #define CONFIG_SYS_UEC8_ETH_TYPE       GIGA_ETH
 416 #define CONFIG_SYS_UEC8_PHY_ADDR       6
 417 #define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 418 #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
 419 #endif /* CONFIG_UEC_ETH8 */
 420
 421 #endif /* CONFIG_QE */
 422
 423 #if defined(CONFIG_PCI)
 424 #undef CONFIG_EEPRO100
 425 #undef CONFIG_TULIP
 426
 427 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 428
 429 #endif  /* CONFIG_PCI */
 430
 431 /*
 432  * Environment
 433  */
 434 #if defined(CONFIG_SYS_RAMBOOT)
 435 #else
 436 #define CONFIG_ENV_IS_IN_FLASH  1
 437 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 438 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 439 #define CONFIG_ENV_SIZE         0x2000
 440 #endif
 441
 442 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 443 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 444
 445 /* QE microcode/firmware address */
 446 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 447 #define CONFIG_SYS_QE_FW_ADDR   0xfff00000
 448
 449 /*
 450  * BOOTP options
 451  */
 452 #define CONFIG_BOOTP_BOOTFILESIZE
 453 #define CONFIG_BOOTP_BOOTPATH
 454 #define CONFIG_BOOTP_GATEWAY
 455 #define CONFIG_BOOTP_HOSTNAME
 456
 457 /*
 458  * Command line configuration.
 459  */
 460 #define CONFIG_CMD_IRQ
 461 #define CONFIG_CMD_REGINFO
 462
 463 #if defined(CONFIG_PCI)
 464     #define CONFIG_CMD_PCI
 465 #endif
 466
 467 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 468
 469 #define CONFIG_MMC     1
 470
 471 #ifdef CONFIG_MMC
 472 #define CONFIG_FSL_ESDHC
 473 #define CONFIG_FSL_ESDHC_PIN_MUX
 474 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 475 #define CONFIG_GENERIC_MMC
 476 #define CONFIG_DOS_PARTITION
 477 #endif
 478
 479 /*
 480  * Miscellaneous configurable options
 481  */
 482 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 483 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 484 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 485 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 486 #if defined(CONFIG_CMD_KGDB)
 487 #define CONFIG_SYS_CBSIZE       2048            /* Console I/O Buffer Size */
 488 #else
 489 #define CONFIG_SYS_CBSIZE       512             /* Console I/O Buffer Size */
 490 #endif
 491 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 492                                                 /* Print Buffer Size */
 493 #define CONFIG_SYS_MAXARGS      32              /* max number of command args */
 494 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 495                                                 /* Boot Argument Buffer Size */
 496
 497 /*
 498  * For booting Linux, the board info and command line data
 499  * have to be in the first 64 MB of memory, since this is
 500  * the maximum mapped by the Linux kernel during initialization.
 501  */
 502 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux*/
 503 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 504
 505 #if defined(CONFIG_CMD_KGDB)
 506 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 507 #endif
 508
 509 /*
 510  * Environment Configuration
 511  */
 512 #define CONFIG_HOSTNAME mpc8569mds
 513 #define CONFIG_ROOTPATH  "/nfsroot"
 514 #define CONFIG_BOOTFILE  "your.uImage"
 515
 516 #define CONFIG_SERVERIP  192.168.1.1
 517 #define CONFIG_GATEWAYIP 192.168.1.1
 518 #define CONFIG_NETMASK   255.255.255.0
 519
 520 #define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
 521
 522 #undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
 523
 524 #define CONFIG_BAUDRATE 115200
 525
 526 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 527         "netdev=eth0\0"                                                 \
 528         "consoledev=ttyS0\0"                                            \
 529         "ramdiskaddr=600000\0"                                          \
 530         "ramdiskfile=your.ramdisk.u-boot\0"                             \
 531         "fdtaddr=400000\0"                                              \
 532         "fdtfile=your.fdt.dtb\0"                                        \
 533         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 534         "nfsroot=$serverip:$rootpath "                                  \
 535         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 536         "console=$consoledev,$baudrate $othbootargs\0"                  \
 537         "ramargs=setenv bootargs root=/dev/ram rw "                     \
 538         "console=$consoledev,$baudrate $othbootargs\0"                  \
 539
 540 #define CONFIG_NFSBOOTCOMMAND                                           \
 541         "run nfsargs;"                                                  \
 542         "tftp $loadaddr $bootfile;"                                     \
 543         "tftp $fdtaddr $fdtfile;"                                       \
 544         "bootm $loadaddr - $fdtaddr"
 545
 546 #define CONFIG_RAMBOOTCOMMAND                                           \
 547         "run ramargs;"                                                  \
 548         "tftp $ramdiskaddr $ramdiskfile;"                               \
 549         "tftp $loadaddr $bootfile;"                                     \
 550         "bootm $loadaddr $ramdiskaddr"
 551
 552 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 553
 554 #endif  /* __CONFIG_H */