include/configs/M52277EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF52277 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M52277EVB_H
  15 #define _M52277EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M52277EVB        /* M52277EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_BAUDRATE                 115200
  26
  27 #undef CONFIG_WATCHDOG
  28
  29 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35 #define CONFIG_BOOTP_BOOTPATH
  36 #define CONFIG_BOOTP_GATEWAY
  37 #define CONFIG_BOOTP_HOSTNAME
  38
  39 /* Command line configuration */
  40 #define CONFIG_CMD_CACHE
  41 #define CONFIG_CMD_DATE
  42 #define CONFIG_CMD_I2C
  43 #define CONFIG_CMD_JFFS2
  44 #define CONFIG_CMD_REGINFO
  45 #undef CONFIG_CMD_USB
  46 #undef CONFIG_CMD_BMP
  47 #define CONFIG_CMD_SPI
  48 #define CONFIG_CMD_SF
  49
  50 #define CONFIG_HOSTNAME                 M52277EVB
  51 #define CONFIG_SYS_UBOOT_END            0x3FFFF
  52 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
  53 #ifdef CONFIG_SYS_STMICRO_BOOT
  54 /* ST Micro serial flash */
  55 #define CONFIG_EXTRA_ENV_SETTINGS               \
  56         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  57         "loadaddr=0x40010000\0"                 \
  58         "uboot=u-boot.bin\0"                    \
  59         "load=loadb ${loadaddr} ${baudrate};"   \
  60         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  61         "upd=run load; run prog\0"              \
  62         "prog=sf probe 0:2 10000 1;"            \
  63         "sf erase 0 30000;"                     \
  64         "sf write ${loadaddr} 0 30000;"         \
  65         "save\0"                                \
  66         ""
  67 #endif
  68 #ifdef CONFIG_SYS_SPANSION_BOOT
  69 #define CONFIG_EXTRA_ENV_SETTINGS               \
  70         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  71         "loadaddr=0x40010000\0"                 \
  72         "uboot=u-boot.bin\0"                    \
  73         "load=loadb ${loadaddr} ${baudrate}\0"  \
  74         "upd=run load; run prog\0"              \
  75         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
  76         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
  77         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
  78         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
  79         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
  80         " ${filesize}; save\0"                  \
  81         "updsbf=run loadsbf; run progsbf\0"     \
  82         "loadsbf=loadb ${loadaddr} ${baudrate};"        \
  83         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  84         "progsbf=sf probe 0:2 10000 1;"         \
  85         "sf erase 0 30000;"                     \
  86         "sf write ${loadaddr} 0 30000;"         \
  87         ""
  88 #endif
  89
  90 #define CONFIG_BOOTDELAY                3       /* autoboot after 3 seconds */
  91 /* LCD */
  92 #ifdef CONFIG_CMD_BMP
  93 #define CONFIG_LCD
  94 #define CONFIG_SPLASH_SCREEN
  95 #define CONFIG_LCD_LOGO
  96 #define CONFIG_SHARP_LQ035Q7DH06
  97 #endif
  98
  99 /* USB */
 100 #ifdef CONFIG_CMD_USB
 101 #define CONFIG_USB_EHCI
 102 #define CONFIG_USB_STORAGE
 103 #define CONFIG_DOS_PARTITION
 104 #define CONFIG_MAC_PARTITION
 105 #define CONFIG_ISO_PARTITION
 106 #define CONFIG_SYS_USB_EHCI_REGS_BASE   0xFC0B0000
 107 #define CONFIG_SYS_USB_EHCI_CPU_INIT
 108 #endif
 109
 110 /* Realtime clock */
 111 #define CONFIG_MCFRTC
 112 #undef RTC_DEBUG
 113 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 114
 115 /* Timer */
 116 #define CONFIG_MCFTMR
 117 #undef CONFIG_MCFPIT
 118
 119 /* I2c */
 120 #define CONFIG_SYS_I2C
 121 #define CONFIG_SYS_I2C_FSL
 122 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 123 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 124 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 125 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 126
 127 /* DSPI and Serial Flash */
 128 #define CONFIG_CF_SPI
 129 #define CONFIG_CF_DSPI
 130 #define CONFIG_HARD_SPI
 131 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 132 #ifdef CONFIG_CMD_SPI
 133 #       define CONFIG_SYS_DSPI_CS2
 134
 135 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 136                                          DSPI_CTAR_PCSSCK_1CLK | \
 137                                          DSPI_CTAR_PASC(0) | \
 138                                          DSPI_CTAR_PDT(0) | \
 139                                          DSPI_CTAR_CSSCK(0) | \
 140                                          DSPI_CTAR_ASC(0) | \
 141                                          DSPI_CTAR_DT(1))
 142 #endif
 143
 144 /* Input, PCI, Flexbus, and VCO */
 145 #define CONFIG_EXTRA_CLOCK
 146
 147 #define CONFIG_SYS_INPUT_CLKSRC 16000000
 148
 149 #define CONFIG_PRAM             2048    /* 2048 KB */
 150
 151 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 152
 153 #if defined(CONFIG_CMD_KGDB)
 154 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 155 #else
 156 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 157 #endif
 158 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 159 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 160 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 161
 162 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 0x10000)
 163
 164 #define CONFIG_SYS_MBAR         0xFC000000
 165
 166 /*
 167  * Low Level Configuration Settings
 168  * (address mappings, register initial values, etc.)
 169  * You should know what you are doing if you make changes here.
 170  */
 171
 172 /*
 173  * Definitions for initial stack pointer and data area (in DPRAM)
 174  */
 175 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 176 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 177 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 178 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 179 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 32)
 180 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 181
 182 /*
 183  * Start addresses for the final memory configuration
 184  * (Set up by the startup code)
 185  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 186  */
 187 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 188 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 189 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 190 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 191 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 192 #define CONFIG_SYS_SDRAM_EMOD           0x81810000
 193 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 194 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0x00
 195
 196 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 197 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 198
 199 #ifdef CONFIG_CF_SBF
 200 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 201 #else
 202 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 203 #endif
 204 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 205 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 206 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 207
 208 /* Initial Memory map for Linux */
 209 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 210 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 211
 212 /*
 213  * Configuration for environment
 214  * Environment is not embedded in u-boot. First time runing may have env
 215  * crc error warning if there is no correct environment on the flash.
 216  */
 217 #ifdef CONFIG_CF_SBF
 218 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 219 #       define CONFIG_ENV_SPI_CS        2
 220 #else
 221 #       define CONFIG_ENV_IS_IN_FLASH   1
 222 #endif
 223 #define CONFIG_ENV_OVERWRITE            1
 224
 225 /*-----------------------------------------------------------------------
 226  * FLASH organization
 227  */
 228 #ifdef CONFIG_SYS_STMICRO_BOOT
 229 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 230 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 231 #       define CONFIG_ENV_OFFSET        0x30000
 232 #       define CONFIG_ENV_SIZE          0x1000
 233 #       define CONFIG_ENV_SECT_SIZE     0x10000
 234 #endif
 235 #ifdef CONFIG_SYS_SPANSION_BOOT
 236 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 237 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 238 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 239 #       define CONFIG_ENV_SIZE          0x1000
 240 #       define CONFIG_ENV_SECT_SIZE     0x8000
 241 #endif
 242
 243 #define CONFIG_SYS_FLASH_CFI
 244 #ifdef CONFIG_SYS_FLASH_CFI
 245 #       define CONFIG_FLASH_CFI_DRIVER  1
 246 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 247 #       define CONFIG_FLASH_SPANSION_S29WS_N    1
 248 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 249 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 250 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 251 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 252 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 253 #       define CONFIG_SYS_FLASH_CHECKSUM
 254 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
 255 #endif
 256
 257 #define LDS_BOARD_TEXT \
 258         arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
 259         arch/m68k/lib/built-in.o            (.text*)
 260
 261 /*
 262  * This is setting for JFFS2 support in u-boot.
 263  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 264  */
 265 #ifdef CONFIG_CMD_JFFS2
 266 #       define CONFIG_JFFS2_DEV         "nor0"
 267 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x40000)
 268 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000)
 269 #endif
 270
 271 /*-----------------------------------------------------------------------
 272  * Cache Configuration
 273  */
 274 #define CONFIG_SYS_CACHELINE_SIZE       16
 275
 276 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 277                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 278 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 279                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 280 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 281 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 282                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 283                                          CF_ACR_EN | CF_ACR_SM_ALL)
 284 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 285                                          CF_CACR_DISD | CF_CACR_INVI | \
 286                                          CF_CACR_CEIB | CF_CACR_DCM | \
 287                                          CF_CACR_EUSP)
 288
 289 /*-----------------------------------------------------------------------
 290  * Memory bank definitions
 291  */
 292 /*
 293  * CS0 - NOR Flash
 294  * CS1 - Available
 295  * CS2 - Available
 296  * CS3 - Available
 297  * CS4 - Available
 298  * CS5 - Available
 299  */
 300
 301 #ifdef CONFIG_CF_SBF
 302 #define CONFIG_SYS_CS0_BASE             0x04000000
 303 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 304 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 305 #else
 306 #define CONFIG_SYS_CS0_BASE             0x00000000
 307 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 308 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 309 #endif
 310
 311 #endif                          /* _M52277EVB_H */