3336301815ff63a1513c09d20578631fbcf41399
[oweals/u-boot.git] / include / clk.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (c) 2015 Google, Inc
4  * Written by Simon Glass <sjg@chromium.org>
5  * Copyright (c) 2016, NVIDIA CORPORATION.
6  */
7
8 #ifndef _CLK_H_
9 #define _CLK_H_
10
11 #include <dm/ofnode.h>
12 #include <linux/errno.h>
13 #include <linux/types.h>
14
15 /**
16  * A clock is a hardware signal that oscillates autonomously at a specific
17  * frequency and duty cycle. Most hardware modules require one or more clock
18  * signal to drive their operation. Clock signals are typically generated
19  * externally to the HW module consuming them, by an entity this API calls a
20  * clock provider. This API provides a standard means for drivers to enable and
21  * disable clocks, and to set the rate at which they oscillate.
22  *
23  * A driver that implements UCLASS_CLK is a clock provider. A provider will
24  * often implement multiple separate clocks, since the hardware it manages
25  * often has this capability. clk-uclass.h describes the interface which
26  * clock providers must implement.
27  *
28  * Clock consumers/clients are the HW modules driven by the clock signals. This
29  * header file describes the API used by drivers for those HW modules.
30  */
31
32 struct udevice;
33
34 /**
35  * struct clk - A handle to (allowing control of) a single clock.
36  *
37  * Clients provide storage for clock handles. The content of the structure is
38  * managed solely by the clock API and clock drivers. A clock struct is
39  * initialized by "get"ing the clock struct. The clock struct is passed to all
40  * other clock APIs to identify which clock signal to operate upon.
41  *
42  * @dev: The device which implements the clock signal.
43  * @rate: The clock rate (in HZ).
44  * @flags: Flags used across common clock structure (e.g. CLK_)
45  *         Clock IP blocks specific flags (i.e. mux, div, gate, etc) are defined
46  *         in struct's for those devices (e.g. struct clk_mux).
47  * @id: The clock signal ID within the provider.
48  * @data: An optional data field for scenarios where a single integer ID is not
49  *        sufficient. If used, it can be populated through an .of_xlate op and
50  *        processed during the various clock ops.
51  *
52  * Should additional information to identify and configure any clock signal
53  * for any provider be required in the future, the struct could be expanded to
54  * either (a) add more fields to allow clock providers to store additional
55  * information, or (b) replace the id field with an opaque pointer, which the
56  * provider would dynamically allocated during its .of_xlate op, and process
57  * during is .request op. This may require the addition of an extra op to clean
58  * up the allocation.
59  */
60 struct clk {
61         struct udevice *dev;
62         long long rate; /* in HZ */
63         u32 flags;
64         int enable_count;
65         /*
66          * Written by of_xlate. In the future, we might add more fields here.
67          */
68         unsigned long id;
69         unsigned long data;
70 };
71
72 /**
73  * struct clk_bulk - A handle to (allowing control of) a bulk of clocks.
74  *
75  * Clients provide storage for the clock bulk. The content of the structure is
76  * managed solely by the clock API. A clock bulk struct is
77  * initialized by "get"ing the clock bulk struct.
78  * The clock bulk struct is passed to all other bulk clock APIs to apply
79  * the API to all the clock in the bulk struct.
80  *
81  * @clks: An array of clock handles.
82  * @count: The number of clock handles in the clks array.
83  */
84 struct clk_bulk {
85         struct clk *clks;
86         unsigned int count;
87 };
88
89 #if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK)
90 struct phandle_1_arg;
91 int clk_get_by_index_platdata(struct udevice *dev, int index,
92                               struct phandle_1_arg *cells, struct clk *clk);
93
94 /**
95  * clock_get_by_index - Get/request a clock by integer index.
96  *
97  * This looks up and requests a clock. The index is relative to the client
98  * device; each device is assumed to have n clocks associated with it somehow,
99  * and this function finds and requests one of them. The mapping of client
100  * device clock indices to provider clocks may be via device-tree properties,
101  * board-provided mapping tables, or some other mechanism.
102  *
103  * @dev:        The client device.
104  * @index:      The index of the clock to request, within the client's list of
105  *              clocks.
106  * @clock       A pointer to a clock struct to initialize.
107  * @return 0 if OK, or a negative error code.
108  */
109 int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);
110
111 /**
112  * clock_get_by_index_nodev - Get/request a clock by integer index
113  * without a device.
114  *
115  * This is a version of clk_get_by_index() that does not use a device.
116  *
117  * @node:       The client ofnode.
118  * @index:      The index of the clock to request, within the client's list of
119  *              clocks.
120  * @clock       A pointer to a clock struct to initialize.
121  * @return 0 if OK, or a negative error code.
122  */
123 int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk);
124
125 /**
126  * clock_get_bulk - Get/request all clocks of a device.
127  *
128  * This looks up and requests all clocks of the client device; each device is
129  * assumed to have n clocks associated with it somehow, and this function finds
130  * and requests all of them in a separate structure. The mapping of client
131  * device clock indices to provider clocks may be via device-tree properties,
132  * board-provided mapping tables, or some other mechanism.
133  *
134  * @dev:        The client device.
135  * @bulk        A pointer to a clock bulk struct to initialize.
136  * @return 0 if OK, or a negative error code.
137  */
138 int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk);
139
140 /**
141  * clock_get_by_name - Get/request a clock by name.
142  *
143  * This looks up and requests a clock. The name is relative to the client
144  * device; each device is assumed to have n clocks associated with it somehow,
145  * and this function finds and requests one of them. The mapping of client
146  * device clock names to provider clocks may be via device-tree properties,
147  * board-provided mapping tables, or some other mechanism.
148  *
149  * @dev:        The client device.
150  * @name:       The name of the clock to request, within the client's list of
151  *              clocks.
152  * @clock:      A pointer to a clock struct to initialize.
153  * @return 0 if OK, or a negative error code.
154  */
155 int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);
156
157 /**
158  * clk_get_by_name_nodev - Get/request a clock by name without a device.
159  *
160  * This is a version of clk_get_by_name() that does not use a device.
161  *
162  * @node:       The client ofnode.
163  * @name:       The name of the clock to request, within the client's list of
164  *              clocks.
165  * @clock:      A pointer to a clock struct to initialize.
166  * @return 0 if OK, or a negative error code.
167  */
168 int clk_get_by_name_nodev(ofnode node, const char *name, struct clk *clk);
169
170 /**
171  * clock_get_optional_nodev - Get/request an optinonal clock by name
172  *              without a device.
173  * @node:       The client ofnode.
174  * @name:       The name of the clock to request.
175  * @name:       The name of the clock to request, within the client's list of
176  *              clocks.
177  * @clock:      A pointer to a clock struct to initialize.
178  *
179  * Behaves the same as clk_get_by_name_nodev() except where there is
180  * no clock producer, in this case, skip the error number -ENODATA, and
181  * the function returns 0.
182  */
183 int clk_get_optional_nodev(ofnode node, const char *name, struct clk *clk);
184
185 /**
186  * devm_clk_get - lookup and obtain a managed reference to a clock producer.
187  * @dev: device for clock "consumer"
188  * @id: clock consumer ID
189  *
190  * Returns a struct clk corresponding to the clock producer, or
191  * valid IS_ERR() condition containing errno.  The implementation
192  * uses @dev and @id to determine the clock consumer, and thereby
193  * the clock producer.  (IOW, @id may be identical strings, but
194  * clk_get may return different clock producers depending on @dev.)
195  *
196  * Drivers must assume that the clock source is not enabled.
197  *
198  * devm_clk_get should not be called from within interrupt context.
199  *
200  * The clock will automatically be freed when the device is unbound
201  * from the bus.
202  */
203 struct clk *devm_clk_get(struct udevice *dev, const char *id);
204
205 /**
206  * devm_clk_get_optional - lookup and obtain a managed reference to an optional
207  *                         clock producer.
208  * @dev: device for clock "consumer"
209  * @id: clock consumer ID
210  *
211  * Behaves the same as devm_clk_get() except where there is no clock producer.
212  * In this case, instead of returning -ENOENT, the function returns NULL.
213  */
214 struct clk *devm_clk_get_optional(struct udevice *dev, const char *id);
215
216 /**
217  * clk_release_all() - Disable (turn off)/Free an array of previously
218  * requested clocks.
219  *
220  * For each clock contained in the clock array, this function will check if
221  * clock has been previously requested and then will disable and free it.
222  *
223  * @clk:        A clock struct array that was previously successfully
224  *              requested by clk_request/get_by_*().
225  * @count       Number of clock contained in the array
226  * @return zero on success, or -ve error code.
227  */
228 int clk_release_all(struct clk *clk, int count);
229
230 /**
231  * devm_clk_put - "free" a managed clock source
232  * @dev: device used to acquire the clock
233  * @clk: clock source acquired with devm_clk_get()
234  *
235  * Note: drivers must ensure that all clk_enable calls made on this
236  * clock source are balanced by clk_disable calls prior to calling
237  * this function.
238  *
239  * clk_put should not be called from within interrupt context.
240  */
241 void devm_clk_put(struct udevice *dev, struct clk *clk);
242
243 #else
244 static inline int clk_get_by_index(struct udevice *dev, int index,
245                                    struct clk *clk)
246 {
247         return -ENOSYS;
248 }
249
250 static inline int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk)
251 {
252         return -ENOSYS;
253 }
254
255 static inline int clk_get_by_name(struct udevice *dev, const char *name,
256                            struct clk *clk)
257 {
258         return -ENOSYS;
259 }
260
261 static inline int
262 clk_get_by_name_nodev(ofnode node, const char *name, struct clk *clk)
263 {
264         return -ENOSYS;
265 }
266
267 static inline int
268 clk_get_optional_nodev(ofnode node, const char *name, struct clk *clk)
269 {
270         return -ENOSYS;
271 }
272
273 static inline int clk_release_all(struct clk *clk, int count)
274 {
275         return -ENOSYS;
276 }
277 #endif
278
279 #if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) && \
280         CONFIG_IS_ENABLED(CLK)
281 /**
282  * clk_set_defaults - Process 'assigned-{clocks/clock-parents/clock-rates}'
283  *                    properties to configure clocks
284  *
285  * @dev:        A device to process (the ofnode associated with this device
286  *              will be processed).
287  * @stage:      A integer. 0 indicates that this is called before the device
288  *              is probed. 1 indicates that this is called just after the
289  *              device has been probed
290  */
291 int clk_set_defaults(struct udevice *dev, int stage);
292 #else
293 static inline int clk_set_defaults(struct udevice *dev, int stage)
294 {
295         return 0;
296 }
297 #endif
298
299 /**
300  * clk_release_bulk() - Disable (turn off)/Free an array of previously
301  * requested clocks in a clock bulk struct.
302  *
303  * For each clock contained in the clock bulk struct, this function will check
304  * if clock has been previously requested and then will disable and free it.
305  *
306  * @clk:        A clock bulk struct that was previously successfully
307  *              requested by clk_get_bulk().
308  * @return zero on success, or -ve error code.
309  */
310 static inline int clk_release_bulk(struct clk_bulk *bulk)
311 {
312         return clk_release_all(bulk->clks, bulk->count);
313 }
314
315 /**
316  * clk_request - Request a clock by provider-specific ID.
317  *
318  * This requests a clock using a provider-specific ID. Generally, this function
319  * should not be used, since clk_get_by_index/name() provide an interface that
320  * better separates clients from intimate knowledge of clock providers.
321  * However, this function may be useful in core SoC-specific code.
322  *
323  * @dev:        The clock provider device.
324  * @clock:      A pointer to a clock struct to initialize. The caller must
325  *              have already initialized any field in this struct which the
326  *              clock provider uses to identify the clock.
327  * @return 0 if OK, or a negative error code.
328  */
329 int clk_request(struct udevice *dev, struct clk *clk);
330
331 /**
332  * clock_free - Free a previously requested clock.
333  *
334  * @clock:      A clock struct that was previously successfully requested by
335  *              clk_request/get_by_*().
336  * @return 0 if OK, or a negative error code.
337  */
338 int clk_free(struct clk *clk);
339
340 /**
341  * clk_get_rate() - Get current clock rate.
342  *
343  * @clk:        A clock struct that was previously successfully requested by
344  *              clk_request/get_by_*().
345  * @return clock rate in Hz, or -ve error code.
346  */
347 ulong clk_get_rate(struct clk *clk);
348
349 /**
350  * clk_get_parent() - Get current clock's parent.
351  *
352  * @clk:        A clock struct that was previously successfully requested by
353  *              clk_request/get_by_*().
354  * @return pointer to parent's struct clk, or error code passed as pointer
355  */
356 struct clk *clk_get_parent(struct clk *clk);
357
358 /**
359  * clk_get_parent_rate() - Get parent of current clock rate.
360  *
361  * @clk:        A clock struct that was previously successfully requested by
362  *              clk_request/get_by_*().
363  * @return clock rate in Hz, or -ve error code.
364  */
365 long long clk_get_parent_rate(struct clk *clk);
366
367 /**
368  * clk_set_rate() - Set current clock rate.
369  *
370  * @clk:        A clock struct that was previously successfully requested by
371  *              clk_request/get_by_*().
372  * @rate:       New clock rate in Hz.
373  * @return new rate, or -ve error code.
374  */
375 ulong clk_set_rate(struct clk *clk, ulong rate);
376
377 /**
378  * clk_set_parent() - Set current clock parent.
379  *
380  * @clk:        A clock struct that was previously successfully requested by
381  *              clk_request/get_by_*().
382  * @parent:     A clock struct that was previously successfully requested by
383  *              clk_request/get_by_*().
384  * @return new rate, or -ve error code.
385  */
386 int clk_set_parent(struct clk *clk, struct clk *parent);
387
388 /**
389  * clk_enable() - Enable (turn on) a clock.
390  *
391  * @clk:        A clock struct that was previously successfully requested by
392  *              clk_request/get_by_*().
393  * @return zero on success, or -ve error code.
394  */
395 int clk_enable(struct clk *clk);
396
397 /**
398  * clk_enable_bulk() - Enable (turn on) all clocks in a clock bulk struct.
399  *
400  * @bulk:       A clock bulk struct that was previously successfully requested
401  *              by clk_get_bulk().
402  * @return zero on success, or -ve error code.
403  */
404 int clk_enable_bulk(struct clk_bulk *bulk);
405
406 /**
407  * clk_disable() - Disable (turn off) a clock.
408  *
409  * @clk:        A clock struct that was previously successfully requested by
410  *              clk_request/get_by_*().
411  * @return zero on success, or -ve error code.
412  */
413 int clk_disable(struct clk *clk);
414
415 /**
416  * clk_disable_bulk() - Disable (turn off) all clocks in a clock bulk struct.
417  *
418  * @bulk:       A clock bulk struct that was previously successfully requested
419  *              by clk_get_bulk().
420  * @return zero on success, or -ve error code.
421  */
422 int clk_disable_bulk(struct clk_bulk *bulk);
423
424 /**
425  * clk_is_match - check if two clk's point to the same hardware clock
426  * @p: clk compared against q
427  * @q: clk compared against p
428  *
429  * Returns true if the two struct clk pointers both point to the same hardware
430  * clock node.
431  *
432  * Returns false otherwise. Note that two NULL clks are treated as matching.
433  */
434 bool clk_is_match(const struct clk *p, const struct clk *q);
435
436 int soc_clk_dump(void);
437
438 /**
439  * clk_valid() - check if clk is valid
440  *
441  * @clk:        the clock to check
442  * @return true if valid, or false
443  */
444 static inline bool clk_valid(struct clk *clk)
445 {
446         return clk && !!clk->dev;
447 }
448
449 /**
450  * clk_get_by_id() - Get the clock by its ID
451  *
452  * @id: The clock ID to search for
453  *
454  * @clkp:       A pointer to clock struct that has been found among added clocks
455  *              to UCLASS_CLK
456  * @return zero on success, or -ENOENT on error
457  */
458 int clk_get_by_id(ulong id, struct clk **clkp);
459
460 /**
461  * clk_dev_binded() - Check whether the clk has a device binded
462  *
463  * @clk         A pointer to the clk
464  *
465  * @return true on binded, or false on no
466  */
467 bool clk_dev_binded(struct clk *clk);
468 #endif
469
470 #define clk_prepare_enable(clk) clk_enable(clk)
471 #define clk_disable_unprepare(clk) clk_disable(clk)