rtc: add Microcrystal RV-8803 driver
[oweals/u-boot.git] / drivers / rtc / mxsrtc.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Freescale i.MX28 RTC Driver
4  *
5  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
6  * on behalf of DENX Software Engineering GmbH
7  */
8
9 #include <common.h>
10 #include <rtc.h>
11 #include <asm/io.h>
12 #include <asm/arch/imx-regs.h>
13 #include <asm/arch/sys_proto.h>
14
15 #define MXS_RTC_MAX_TIMEOUT     1000000
16
17 /* Set time in seconds since 1970-01-01 */
18 int mxs_rtc_set_time(uint32_t secs)
19 {
20         struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
21         int ret;
22
23         writel(secs, &rtc_regs->hw_rtc_seconds);
24
25         /*
26          * The 0x80 here means seconds were copied to analog. This information
27          * is taken from the linux kernel driver for the STMP37xx RTC since
28          * documentation doesn't mention it.
29          */
30         ret = mxs_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
31                 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT);
32
33         if (ret)
34                 printf("MXS RTC: Timeout waiting for update\n");
35
36         return ret;
37 }
38
39 int rtc_get(struct rtc_time *time)
40 {
41         struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
42         uint32_t secs;
43
44         secs = readl(&rtc_regs->hw_rtc_seconds);
45         rtc_to_tm(secs, time);
46
47         return 0;
48 }
49
50 int rtc_set(struct rtc_time *time)
51 {
52         uint32_t secs;
53
54         secs = rtc_mktime(time);
55
56         return mxs_rtc_set_time(secs);
57 }
58
59 void rtc_reset(void)
60 {
61         struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
62         int ret;
63
64         /* Set time to 1970-01-01 */
65         mxs_rtc_set_time(0);
66
67         /* Reset the RTC block */
68         ret = mxs_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
69         if (ret)
70                 printf("MXS RTC: Block reset timeout\n");
71 }