drivers/qe/uec_phy.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2005,2010-2011 Freescale Semiconductor, Inc.
   4  *
   5  * Author: Shlomi Gridish
   6  *
   7  * Description: UCC GETH Driver -- PHY handling
   8  *              Driver for UEC on QE
   9  *              Based on 8260_io/fcc_enet.c
  10  */
  11
  12 #include <common.h>
  13 #include <net.h>
  14 #include <malloc.h>
  15 #include <linux/errno.h>
  16 #include <linux/immap_qe.h>
  17 #include <asm/io.h>
  18 #include "uccf.h"
  19 #include "uec.h"
  20 #include "uec_phy.h"
  21 #include "miiphy.h"
  22 #include <fsl_qe.h>
  23 #include <phy.h>
  24
  25 #define ugphy_printk(format, arg...)  \
  26         printf(format "\n", ## arg)
  27
  28 #define ugphy_dbg(format, arg...)            \
  29         ugphy_printk(format , ## arg)
  30 #define ugphy_err(format, arg...)            \
  31         ugphy_printk(format , ## arg)
  32 #define ugphy_info(format, arg...)           \
  33         ugphy_printk(format , ## arg)
  34 #define ugphy_warn(format, arg...)           \
  35         ugphy_printk(format , ## arg)
  36
  37 #ifdef UEC_VERBOSE_DEBUG
  38 #define ugphy_vdbg ugphy_dbg
  39 #else
  40 #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
  41 #endif /* UEC_VERBOSE_DEBUG */
  42
  43 /*--------------------------------------------------------------------+
  44  * Fixed PHY (PHY-less) support for Ethernet Ports.
  45  *
  46  * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
  47  *--------------------------------------------------------------------*/
  48
  49 /*
  50  * Some boards do not have a PHY for each ethernet port. These ports are known
  51  * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
  52  * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
  53  * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned
  54  * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network
  55  * speed and duplex should be for the port.
  56  *
  57  * Example board header configuration file:
  58  *     #define CONFIG_FIXED_PHY   0xFFFFFFFF
  59  *     #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address)
  60  *
  61  *     #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
  62  *     #define CONFIG_SYS_UEC2_PHY_ADDR 0x02
  63  *     #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
  64  *     #define CONFIG_SYS_UEC4_PHY_ADDR 0x04
  65  *
  66  *     #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \
  67  *                 {name, speed, duplex},
  68  *
  69  *     #define CONFIG_SYS_FIXED_PHY_PORTS \
  70  *                 CONFIG_SYS_FIXED_PHY_PORT("UEC0",SPEED_100,DUPLEX_FULL) \
  71  *                 CONFIG_SYS_FIXED_PHY_PORT("UEC2",SPEED_100,DUPLEX_HALF)
  72  */
  73
  74 #ifndef CONFIG_FIXED_PHY
  75 #define CONFIG_FIXED_PHY        0xFFFFFFFF /* Fixed PHY (PHY-less) */
  76 #endif
  77
  78 #ifndef CONFIG_SYS_FIXED_PHY_PORTS
  79 #define CONFIG_SYS_FIXED_PHY_PORTS      /* default is an empty array */
  80 #endif
  81
  82 struct fixed_phy_port {
  83         char name[16];  /* ethernet port name */
  84         unsigned int speed;     /* specified speed 10,100 or 1000 */
  85         unsigned int duplex;    /* specified duplex FULL or HALF */
  86 };
  87
  88 static const struct fixed_phy_port fixed_phy_port[] = {
  89         CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
  90 };
  91
  92 /*--------------------------------------------------------------------+
  93  * BitBang MII support for ethernet ports
  94  *
  95  * Based from MPC8560ADS implementation
  96  *--------------------------------------------------------------------*/
  97 /*
  98  * Example board header file to define bitbang ethernet ports:
  99  *
 100  * #define CONFIG_SYS_BITBANG_PHY_PORT(name) name,
 101  * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("UEC0")
 102 */
 103 #ifndef CONFIG_SYS_BITBANG_PHY_PORTS
 104 #define CONFIG_SYS_BITBANG_PHY_PORTS    /* default is an empty array */
 105 #endif
 106
 107 #if defined(CONFIG_BITBANGMII)
 108 static const char *bitbang_phy_port[] = {
 109         CONFIG_SYS_BITBANG_PHY_PORTS /* defined in board configuration file */
 110 };
 111 #endif /* CONFIG_BITBANGMII */
 112
 113 static void config_genmii_advert (struct uec_mii_info *mii_info);
 114 static void genmii_setup_forced (struct uec_mii_info *mii_info);
 115 static void genmii_restart_aneg (struct uec_mii_info *mii_info);
 116 static int gbit_config_aneg (struct uec_mii_info *mii_info);
 117 static int genmii_config_aneg (struct uec_mii_info *mii_info);
 118 static int genmii_update_link (struct uec_mii_info *mii_info);
 119 static int genmii_read_status (struct uec_mii_info *mii_info);
 120 u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
 121 void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
 122
 123 /* Write value to the PHY for this device to the register at regnum, */
 124 /* waiting until the write is done before it returns.  All PHY */
 125 /* configuration has to be done through the TSEC1 MIIM regs */
 126 void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
 127 {
 128         uec_private_t *ugeth = (uec_private_t *) dev->priv;
 129         uec_mii_t *ug_regs;
 130         enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 131         u32 tmp_reg;
 132
 133
 134 #if defined(CONFIG_BITBANGMII)
 135         u32 i = 0;
 136
 137         for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
 138                 if (strncmp(dev->name, bitbang_phy_port[i],
 139                         sizeof(dev->name)) == 0) {
 140                         (void)bb_miiphy_write(NULL, mii_id, regnum, value);
 141                         return;
 142                 }
 143         }
 144 #endif /* CONFIG_BITBANGMII */
 145
 146         ug_regs = ugeth->uec_mii_regs;
 147
 148         /* Stop the MII management read cycle */
 149         out_be32 (&ug_regs->miimcom, 0);
 150         /* Setting up the MII Mangement Address Register */
 151         tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
 152         out_be32 (&ug_regs->miimadd, tmp_reg);
 153
 154         /* Setting up the MII Mangement Control Register with the value */
 155         out_be32 (&ug_regs->miimcon, (u32) value);
 156         sync();
 157
 158         /* Wait till MII management write is complete */
 159         while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
 160 }
 161
 162 /* Reads from register regnum in the PHY for device dev, */
 163 /* returning the value.  Clears miimcom first.  All PHY */
 164 /* configuration has to be done through the TSEC1 MIIM regs */
 165 int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
 166 {
 167         uec_private_t *ugeth = (uec_private_t *) dev->priv;
 168         uec_mii_t *ug_regs;
 169         enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 170         u32 tmp_reg;
 171         u16 value;
 172
 173
 174 #if defined(CONFIG_BITBANGMII)
 175         u32 i = 0;
 176
 177         for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
 178                 if (strncmp(dev->name, bitbang_phy_port[i],
 179                         sizeof(dev->name)) == 0) {
 180                         (void)bb_miiphy_read(NULL, mii_id, regnum, &value);
 181                         return (value);
 182                 }
 183         }
 184 #endif /* CONFIG_BITBANGMII */
 185
 186         ug_regs = ugeth->uec_mii_regs;
 187
 188         /* Setting up the MII Mangement Address Register */
 189         tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
 190         out_be32 (&ug_regs->miimadd, tmp_reg);
 191
 192         /* clear MII management command cycle */
 193         out_be32 (&ug_regs->miimcom, 0);
 194         sync();
 195
 196         /* Perform an MII management read cycle */
 197         out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
 198
 199         /* Wait till MII management write is complete */
 200         while ((in_be32 (&ug_regs->miimind)) &
 201                (MIIMIND_NOT_VALID | MIIMIND_BUSY));
 202
 203         /* Read MII management status  */
 204         value = (u16) in_be32 (&ug_regs->miimstat);
 205         if (value == 0xffff)
 206                 ugphy_vdbg
 207                         ("read wrong value : mii_id %d,mii_reg %d, base %08x",
 208                          mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
 209
 210         return (value);
 211 }
 212
 213 void mii_clear_phy_interrupt (struct uec_mii_info *mii_info)
 214 {
 215         if (mii_info->phyinfo->ack_interrupt)
 216                 mii_info->phyinfo->ack_interrupt (mii_info);
 217 }
 218
 219 void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
 220                                   u32 interrupts)
 221 {
 222         mii_info->interrupts = interrupts;
 223         if (mii_info->phyinfo->config_intr)
 224                 mii_info->phyinfo->config_intr (mii_info);
 225 }
 226
 227 /* Writes MII_ADVERTISE with the appropriate values, after
 228  * sanitizing advertise to make sure only supported features
 229  * are advertised
 230  */
 231 static void config_genmii_advert (struct uec_mii_info *mii_info)
 232 {
 233         u32 advertise;
 234         u16 adv;
 235
 236         /* Only allow advertising what this PHY supports */
 237         mii_info->advertising &= mii_info->phyinfo->features;
 238         advertise = mii_info->advertising;
 239
 240         /* Setup standard advertisement */
 241         adv = uec_phy_read(mii_info, MII_ADVERTISE);
 242         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 243         if (advertise & ADVERTISED_10baseT_Half)
 244                 adv |= ADVERTISE_10HALF;
 245         if (advertise & ADVERTISED_10baseT_Full)
 246                 adv |= ADVERTISE_10FULL;
 247         if (advertise & ADVERTISED_100baseT_Half)
 248                 adv |= ADVERTISE_100HALF;
 249         if (advertise & ADVERTISED_100baseT_Full)
 250                 adv |= ADVERTISE_100FULL;
 251         uec_phy_write(mii_info, MII_ADVERTISE, adv);
 252 }
 253
 254 static void genmii_setup_forced (struct uec_mii_info *mii_info)
 255 {
 256         u16 ctrl;
 257         u32 features = mii_info->phyinfo->features;
 258
 259         ctrl = uec_phy_read(mii_info, MII_BMCR);
 260
 261         ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
 262                   BMCR_SPEED1000 | BMCR_ANENABLE);
 263         ctrl |= BMCR_RESET;
 264
 265         switch (mii_info->speed) {
 266         case SPEED_1000:
 267                 if (features & (SUPPORTED_1000baseT_Half
 268                                 | SUPPORTED_1000baseT_Full)) {
 269                         ctrl |= BMCR_SPEED1000;
 270                         break;
 271                 }
 272                 mii_info->speed = SPEED_100;
 273         case SPEED_100:
 274                 if (features & (SUPPORTED_100baseT_Half
 275                                 | SUPPORTED_100baseT_Full)) {
 276                         ctrl |= BMCR_SPEED100;
 277                         break;
 278                 }
 279                 mii_info->speed = SPEED_10;
 280         case SPEED_10:
 281                 if (features & (SUPPORTED_10baseT_Half
 282                                 | SUPPORTED_10baseT_Full))
 283                         break;
 284         default:                /* Unsupported speed! */
 285                 ugphy_err ("%s: Bad speed!", mii_info->dev->name);
 286                 break;
 287         }
 288
 289         uec_phy_write(mii_info, MII_BMCR, ctrl);
 290 }
 291
 292 /* Enable and Restart Autonegotiation */
 293 static void genmii_restart_aneg (struct uec_mii_info *mii_info)
 294 {
 295         u16 ctl;
 296
 297         ctl = uec_phy_read(mii_info, MII_BMCR);
 298         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 299         uec_phy_write(mii_info, MII_BMCR, ctl);
 300 }
 301
 302 static int gbit_config_aneg (struct uec_mii_info *mii_info)
 303 {
 304         u16 adv;
 305         u32 advertise;
 306
 307         if (mii_info->autoneg) {
 308                 /* Configure the ADVERTISE register */
 309                 config_genmii_advert (mii_info);
 310                 advertise = mii_info->advertising;
 311
 312                 adv = uec_phy_read(mii_info, MII_CTRL1000);
 313                 adv &= ~(ADVERTISE_1000FULL |
 314                          ADVERTISE_1000HALF);
 315                 if (advertise & SUPPORTED_1000baseT_Half)
 316                         adv |= ADVERTISE_1000HALF;
 317                 if (advertise & SUPPORTED_1000baseT_Full)
 318                         adv |= ADVERTISE_1000FULL;
 319                 uec_phy_write(mii_info, MII_CTRL1000, adv);
 320
 321                 /* Start/Restart aneg */
 322                 genmii_restart_aneg (mii_info);
 323         } else
 324                 genmii_setup_forced (mii_info);
 325
 326         return 0;
 327 }
 328
 329 static int marvell_config_aneg (struct uec_mii_info *mii_info)
 330 {
 331         /* The Marvell PHY has an errata which requires
 332          * that certain registers get written in order
 333          * to restart autonegotiation */
 334         uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 335
 336         uec_phy_write(mii_info, 0x1d, 0x1f);
 337         uec_phy_write(mii_info, 0x1e, 0x200c);
 338         uec_phy_write(mii_info, 0x1d, 0x5);
 339         uec_phy_write(mii_info, 0x1e, 0);
 340         uec_phy_write(mii_info, 0x1e, 0x100);
 341
 342         gbit_config_aneg (mii_info);
 343
 344         return 0;
 345 }
 346
 347 static int genmii_config_aneg (struct uec_mii_info *mii_info)
 348 {
 349         if (mii_info->autoneg) {
 350                 /* Speed up the common case, if link is already up, speed and
 351                    duplex match, skip auto neg as it already matches */
 352                 if (!genmii_read_status(mii_info) && mii_info->link)
 353                         if (mii_info->duplex == DUPLEX_FULL &&
 354                             mii_info->speed == SPEED_100)
 355                                 if (mii_info->advertising &
 356                                     ADVERTISED_100baseT_Full)
 357                                         return 0;
 358
 359                 config_genmii_advert (mii_info);
 360                 genmii_restart_aneg (mii_info);
 361         } else
 362                 genmii_setup_forced (mii_info);
 363
 364         return 0;
 365 }
 366
 367 static int genmii_update_link (struct uec_mii_info *mii_info)
 368 {
 369         u16 status;
 370
 371         /* Status is read once to clear old link state */
 372         uec_phy_read(mii_info, MII_BMSR);
 373
 374         /*
 375          * Wait if the link is up, and autonegotiation is in progress
 376          * (ie - we're capable and it's not done)
 377          */
 378         status = uec_phy_read(mii_info, MII_BMSR);
 379         if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
 380             && !(status & BMSR_ANEGCOMPLETE)) {
 381                 int i = 0;
 382
 383                 while (!(status & BMSR_ANEGCOMPLETE)) {
 384                         /*
 385                          * Timeout reached ?
 386                          */
 387                         if (i > UGETH_AN_TIMEOUT) {
 388                                 mii_info->link = 0;
 389                                 return 0;
 390                         }
 391
 392                         i++;
 393                         udelay(1000);   /* 1 ms */
 394                         status = uec_phy_read(mii_info, MII_BMSR);
 395                 }
 396                 mii_info->link = 1;
 397         } else {
 398                 if (status & BMSR_LSTATUS)
 399                         mii_info->link = 1;
 400                 else
 401                         mii_info->link = 0;
 402         }
 403
 404         return 0;
 405 }
 406
 407 static int genmii_read_status (struct uec_mii_info *mii_info)
 408 {
 409         u16 status;
 410         int err;
 411
 412         /* Update the link, but return if there
 413          * was an error */
 414         err = genmii_update_link (mii_info);
 415         if (err)
 416                 return err;
 417
 418         if (mii_info->autoneg) {
 419                 status = uec_phy_read(mii_info, MII_STAT1000);
 420
 421                 if (status & (LPA_1000FULL | LPA_1000HALF)) {
 422                         mii_info->speed = SPEED_1000;
 423                         if (status & LPA_1000FULL)
 424                                 mii_info->duplex = DUPLEX_FULL;
 425                         else
 426                                 mii_info->duplex = DUPLEX_HALF;
 427                 } else {
 428                         status = uec_phy_read(mii_info, MII_LPA);
 429
 430                         if (status & (LPA_10FULL | LPA_100FULL))
 431                                 mii_info->duplex = DUPLEX_FULL;
 432                         else
 433                                 mii_info->duplex = DUPLEX_HALF;
 434                         if (status & (LPA_100FULL | LPA_100HALF))
 435                                 mii_info->speed = SPEED_100;
 436                         else
 437                                 mii_info->speed = SPEED_10;
 438                 }
 439                 mii_info->pause = 0;
 440         }
 441         /* On non-aneg, we assume what we put in BMCR is the speed,
 442          * though magic-aneg shouldn't prevent this case from occurring
 443          */
 444
 445         return 0;
 446 }
 447
 448 static int bcm_init(struct uec_mii_info *mii_info)
 449 {
 450         struct eth_device *edev = mii_info->dev;
 451         uec_private_t *uec = edev->priv;
 452
 453         gbit_config_aneg(mii_info);
 454
 455         if ((uec->uec_info->enet_interface_type ==
 456                                 PHY_INTERFACE_MODE_RGMII_RXID) &&
 457                         (uec->uec_info->speed == SPEED_1000)) {
 458                 u16 val;
 459                 int cnt = 50;
 460
 461                 /* Wait for aneg to complete. */
 462                 do
 463                         val = uec_phy_read(mii_info, MII_BMSR);
 464                 while (--cnt && !(val & BMSR_ANEGCOMPLETE));
 465
 466                 /* Set RDX clk delay. */
 467                 uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12));
 468
 469                 val = uec_phy_read(mii_info, 0x18);
 470                 /* Set RDX-RXC skew. */
 471                 val |= (1 << 8);
 472                 val |= (7 | (7 << 12));
 473                 /* Write bits 14:0. */
 474                 val |= (1 << 15);
 475                 uec_phy_write(mii_info, 0x18, val);
 476         }
 477
 478          return 0;
 479 }
 480
 481 static int uec_marvell_init(struct uec_mii_info *mii_info)
 482 {
 483         struct eth_device *edev = mii_info->dev;
 484         uec_private_t *uec = edev->priv;
 485         phy_interface_t iface = uec->uec_info->enet_interface_type;
 486         int     speed = uec->uec_info->speed;
 487
 488         if ((speed == SPEED_1000) &&
 489            (iface == PHY_INTERFACE_MODE_RGMII_ID ||
 490             iface == PHY_INTERFACE_MODE_RGMII_RXID ||
 491             iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 492                 int temp;
 493
 494                 temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
 495                 if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
 496                         temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
 497                 } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
 498                         temp &= ~MII_M1111_TX_DELAY;
 499                         temp |= MII_M1111_RX_DELAY;
 500                 } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
 501                         temp &= ~MII_M1111_RX_DELAY;
 502                         temp |= MII_M1111_TX_DELAY;
 503                 }
 504                 uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
 505
 506                 temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR);
 507                 temp &= ~MII_M1111_HWCFG_MODE_MASK;
 508                 temp |= MII_M1111_HWCFG_MODE_RGMII;
 509                 uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
 510
 511                 uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 512         }
 513
 514         return 0;
 515 }
 516
 517 static int marvell_read_status (struct uec_mii_info *mii_info)
 518 {
 519         u16 status;
 520         int err;
 521
 522         /* Update the link, but return if there
 523          * was an error */
 524         err = genmii_update_link (mii_info);
 525         if (err)
 526                 return err;
 527
 528         /* If the link is up, read the speed and duplex */
 529         /* If we aren't autonegotiating, assume speeds
 530          * are as set */
 531         if (mii_info->autoneg && mii_info->link) {
 532                 int speed;
 533
 534                 status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
 535
 536                 /* Get the duplexity */
 537                 if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
 538                         mii_info->duplex = DUPLEX_FULL;
 539                 else
 540                         mii_info->duplex = DUPLEX_HALF;
 541
 542                 /* Get the speed */
 543                 speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
 544                 switch (speed) {
 545                 case MII_M1011_PHY_SPEC_STATUS_1000:
 546                         mii_info->speed = SPEED_1000;
 547                         break;
 548                 case MII_M1011_PHY_SPEC_STATUS_100:
 549                         mii_info->speed = SPEED_100;
 550                         break;
 551                 default:
 552                         mii_info->speed = SPEED_10;
 553                         break;
 554                 }
 555                 mii_info->pause = 0;
 556         }
 557
 558         return 0;
 559 }
 560
 561 static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
 562 {
 563         /* Clear the interrupts by reading the reg */
 564         uec_phy_read(mii_info, MII_M1011_IEVENT);
 565
 566         return 0;
 567 }
 568
 569 static int marvell_config_intr (struct uec_mii_info *mii_info)
 570 {
 571         if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
 572                 uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 573         else
 574                 uec_phy_write(mii_info, MII_M1011_IMASK,
 575                                 MII_M1011_IMASK_CLEAR);
 576
 577         return 0;
 578 }
 579
 580 static int dm9161_init (struct uec_mii_info *mii_info)
 581 {
 582         /* Reset the PHY */
 583         uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) |
 584                    BMCR_RESET);
 585         /* PHY and MAC connect */
 586         uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) &
 587                    ~BMCR_ISOLATE);
 588
 589         uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
 590
 591         config_genmii_advert (mii_info);
 592         /* Start/restart aneg */
 593         genmii_config_aneg (mii_info);
 594
 595         return 0;
 596 }
 597
 598 static int dm9161_config_aneg (struct uec_mii_info *mii_info)
 599 {
 600         return 0;
 601 }
 602
 603 static int dm9161_read_status (struct uec_mii_info *mii_info)
 604 {
 605         u16 status;
 606         int err;
 607
 608         /* Update the link, but return if there was an error */
 609         err = genmii_update_link (mii_info);
 610         if (err)
 611                 return err;
 612         /* If the link is up, read the speed and duplex
 613            If we aren't autonegotiating assume speeds are as set */
 614         if (mii_info->autoneg && mii_info->link) {
 615                 status = uec_phy_read(mii_info, MII_DM9161_SCSR);
 616                 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
 617                         mii_info->speed = SPEED_100;
 618                 else
 619                         mii_info->speed = SPEED_10;
 620
 621                 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
 622                         mii_info->duplex = DUPLEX_FULL;
 623                 else
 624                         mii_info->duplex = DUPLEX_HALF;
 625         }
 626
 627         return 0;
 628 }
 629
 630 static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
 631 {
 632         /* Clear the interrupt by reading the reg */
 633         uec_phy_read(mii_info, MII_DM9161_INTR);
 634
 635         return 0;
 636 }
 637
 638 static int dm9161_config_intr (struct uec_mii_info *mii_info)
 639 {
 640         if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
 641                 uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
 642         else
 643                 uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
 644
 645         return 0;
 646 }
 647
 648 static void dm9161_close (struct uec_mii_info *mii_info)
 649 {
 650 }
 651
 652 static int fixed_phy_aneg (struct uec_mii_info *mii_info)
 653 {
 654         mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
 655         return 0;
 656 }
 657
 658 static int fixed_phy_read_status (struct uec_mii_info *mii_info)
 659 {
 660         int i = 0;
 661
 662         for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
 663                 if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
 664                                 strlen(mii_info->dev->name)) == 0) {
 665                         mii_info->speed = fixed_phy_port[i].speed;
 666                         mii_info->duplex = fixed_phy_port[i].duplex;
 667                         mii_info->link = 1; /* Link is always UP */
 668                         mii_info->pause = 0;
 669                         break;
 670                 }
 671         }
 672         return 0;
 673 }
 674
 675 static int smsc_config_aneg (struct uec_mii_info *mii_info)
 676 {
 677         return 0;
 678 }
 679
 680 static int smsc_read_status (struct uec_mii_info *mii_info)
 681 {
 682         u16 status;
 683         int err;
 684
 685         /* Update the link, but return if there
 686          * was an error */
 687         err = genmii_update_link (mii_info);
 688         if (err)
 689                 return err;
 690
 691         /* If the link is up, read the speed and duplex */
 692         /* If we aren't autonegotiating, assume speeds
 693          * are as set */
 694         if (mii_info->autoneg && mii_info->link) {
 695                 int     val;
 696
 697                 status = uec_phy_read(mii_info, 0x1f);
 698                 val = (status & 0x1c) >> 2;
 699
 700                 switch (val) {
 701                         case 1:
 702                                 mii_info->duplex = DUPLEX_HALF;
 703                                 mii_info->speed = SPEED_10;
 704                                 break;
 705                         case 5:
 706                                 mii_info->duplex = DUPLEX_FULL;
 707                                 mii_info->speed = SPEED_10;
 708                                 break;
 709                         case 2:
 710                                 mii_info->duplex = DUPLEX_HALF;
 711                                 mii_info->speed = SPEED_100;
 712                                 break;
 713                         case 6:
 714                                 mii_info->duplex = DUPLEX_FULL;
 715                                 mii_info->speed = SPEED_100;
 716                                 break;
 717                 }
 718                 mii_info->pause = 0;
 719         }
 720
 721         return 0;
 722 }
 723
 724 static struct phy_info phy_info_dm9161 = {
 725         .phy_id = 0x0181b880,
 726         .phy_id_mask = 0x0ffffff0,
 727         .name = "Davicom DM9161E",
 728         .init = dm9161_init,
 729         .config_aneg = dm9161_config_aneg,
 730         .read_status = dm9161_read_status,
 731         .close = dm9161_close,
 732 };
 733
 734 static struct phy_info phy_info_dm9161a = {
 735         .phy_id = 0x0181b8a0,
 736         .phy_id_mask = 0x0ffffff0,
 737         .name = "Davicom DM9161A",
 738         .features = MII_BASIC_FEATURES,
 739         .init = dm9161_init,
 740         .config_aneg = dm9161_config_aneg,
 741         .read_status = dm9161_read_status,
 742         .ack_interrupt = dm9161_ack_interrupt,
 743         .config_intr = dm9161_config_intr,
 744         .close = dm9161_close,
 745 };
 746
 747 static struct phy_info phy_info_marvell = {
 748         .phy_id = 0x01410c00,
 749         .phy_id_mask = 0xffffff00,
 750         .name = "Marvell 88E11x1",
 751         .features = MII_GBIT_FEATURES,
 752         .init = &uec_marvell_init,
 753         .config_aneg = &marvell_config_aneg,
 754         .read_status = &marvell_read_status,
 755         .ack_interrupt = &marvell_ack_interrupt,
 756         .config_intr = &marvell_config_intr,
 757 };
 758
 759 static struct phy_info phy_info_bcm5481 = {
 760         .phy_id = 0x0143bca0,
 761         .phy_id_mask = 0xffffff0,
 762         .name = "Broadcom 5481",
 763         .features = MII_GBIT_FEATURES,
 764         .read_status = genmii_read_status,
 765         .init = bcm_init,
 766 };
 767
 768 static struct phy_info phy_info_fixedphy = {
 769         .phy_id = CONFIG_FIXED_PHY,
 770         .phy_id_mask = CONFIG_FIXED_PHY,
 771         .name = "Fixed PHY",
 772         .config_aneg = fixed_phy_aneg,
 773         .read_status = fixed_phy_read_status,
 774 };
 775
 776 static struct phy_info phy_info_smsclan8700 = {
 777         .phy_id = 0x0007c0c0,
 778         .phy_id_mask = 0xfffffff0,
 779         .name = "SMSC LAN8700",
 780         .features = MII_BASIC_FEATURES,
 781         .config_aneg = smsc_config_aneg,
 782         .read_status = smsc_read_status,
 783 };
 784
 785 static struct phy_info phy_info_genmii = {
 786         .phy_id = 0x00000000,
 787         .phy_id_mask = 0x00000000,
 788         .name = "Generic MII",
 789         .features = MII_BASIC_FEATURES,
 790         .config_aneg = genmii_config_aneg,
 791         .read_status = genmii_read_status,
 792 };
 793
 794 static struct phy_info *phy_info[] = {
 795         &phy_info_dm9161,
 796         &phy_info_dm9161a,
 797         &phy_info_marvell,
 798         &phy_info_bcm5481,
 799         &phy_info_smsclan8700,
 800         &phy_info_fixedphy,
 801         &phy_info_genmii,
 802         NULL
 803 };
 804
 805 u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
 806 {
 807         return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
 808 }
 809
 810 void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
 811 {
 812         mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
 813 }
 814
 815 /* Use the PHY ID registers to determine what type of PHY is attached
 816  * to device dev.  return a struct phy_info structure describing that PHY
 817  */
 818 struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 819 {
 820         u16 phy_reg;
 821         u32 phy_ID;
 822         int i;
 823         struct phy_info *theInfo = NULL;
 824
 825         /* Grab the bits from PHYIR1, and put them in the upper half */
 826         phy_reg = uec_phy_read(mii_info, MII_PHYSID1);
 827         phy_ID = (phy_reg & 0xffff) << 16;
 828
 829         /* Grab the bits from PHYIR2, and put them in the lower half */
 830         phy_reg = uec_phy_read(mii_info, MII_PHYSID2);
 831         phy_ID |= (phy_reg & 0xffff);
 832
 833         /* loop through all the known PHY types, and find one that */
 834         /* matches the ID we read from the PHY. */
 835         for (i = 0; phy_info[i]; i++)
 836                 if (phy_info[i]->phy_id ==
 837                     (phy_ID & phy_info[i]->phy_id_mask)) {
 838                         theInfo = phy_info[i];
 839                         break;
 840                 }
 841
 842         /* This shouldn't happen, as we have generic PHY support */
 843         if (theInfo == NULL) {
 844                 ugphy_info ("UEC: PHY id %x is not supported!", phy_ID);
 845                 return NULL;
 846         } else {
 847                 ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
 848         }
 849
 850         return theInfo;
 851 }
 852
 853 void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
 854                 int speed)
 855 {
 856         uec_private_t *uec = (uec_private_t *) dev->priv;
 857         struct uec_mii_info *mii_info;
 858         u16 status;
 859
 860         if (!uec->mii_info) {
 861                 printf ("%s: the PHY not initialized\n", __FUNCTION__);
 862                 return;
 863         }
 864         mii_info = uec->mii_info;
 865
 866         if (type == PHY_INTERFACE_MODE_RGMII) {
 867                 if (speed == SPEED_100) {
 868                         uec_phy_write(mii_info, 0x00, 0x9140);
 869                         uec_phy_write(mii_info, 0x1d, 0x001f);
 870                         uec_phy_write(mii_info, 0x1e, 0x200c);
 871                         uec_phy_write(mii_info, 0x1d, 0x0005);
 872                         uec_phy_write(mii_info, 0x1e, 0x0000);
 873                         uec_phy_write(mii_info, 0x1e, 0x0100);
 874                         uec_phy_write(mii_info, 0x09, 0x0e00);
 875                         uec_phy_write(mii_info, 0x04, 0x01e1);
 876                         uec_phy_write(mii_info, 0x00, 0x9140);
 877                         uec_phy_write(mii_info, 0x00, 0x1000);
 878                         mdelay(100);
 879                         uec_phy_write(mii_info, 0x00, 0x2900);
 880                         uec_phy_write(mii_info, 0x14, 0x0cd2);
 881                         uec_phy_write(mii_info, 0x00, 0xa100);
 882                         uec_phy_write(mii_info, 0x09, 0x0000);
 883                         uec_phy_write(mii_info, 0x1b, 0x800b);
 884                         uec_phy_write(mii_info, 0x04, 0x05e1);
 885                         uec_phy_write(mii_info, 0x00, 0xa100);
 886                         uec_phy_write(mii_info, 0x00, 0x2100);
 887                         mdelay(1000);
 888                 } else if (speed == SPEED_10) {
 889                         uec_phy_write(mii_info, 0x14, 0x8e40);
 890                         uec_phy_write(mii_info, 0x1b, 0x800b);
 891                         uec_phy_write(mii_info, 0x14, 0x0c82);
 892                         uec_phy_write(mii_info, 0x00, 0x8100);
 893                         mdelay(1000);
 894                 }
 895         }
 896
 897         /* handle 88e1111 rev.B2 erratum 5.6 */
 898         if (mii_info->autoneg) {
 899                 status = uec_phy_read(mii_info, MII_BMCR);
 900                 uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE);
 901         }
 902         /* now the B2 will correctly report autoneg completion status */
 903 }
 904
 905 void change_phy_interface_mode (struct eth_device *dev,
 906                                 phy_interface_t type, int speed)
 907 {
 908 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
 909         marvell_phy_interface_mode (dev, type, speed);
 910 #endif
 911 }