configs/pfla02_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX6=y
   3 CONFIG_SYS_TEXT_BASE=0x17800000
   4 CONFIG_SPL_GPIO_SUPPORT=y
   5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   7 CONFIG_TARGET_PFLA02=y
   8 CONFIG_SPL_MMC_SUPPORT=y
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_NR_DRAM_BANKS=1
  11 CONFIG_SPL=y
  12 CONFIG_SPL_LIBDISK_SUPPORT=y
  13 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  14 CONFIG_SPL_SPI_SUPPORT=y
  15 CONFIG_CMD_HDMIDETECT=y
  16 CONFIG_SPL_TEXT_BASE=0x00908000
  17 CONFIG_DISTRO_DEFAULTS=y
  18 CONFIG_FIT=y
  19 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
  20 CONFIG_BOOTDELAY=3
  21 # CONFIG_USE_BOOTCOMMAND is not set
  22 CONFIG_DISPLAY_BOARDINFO_LATE=y
  23 CONFIG_BOUNCE_BUFFER=y
  24 CONFIG_BOARD_EARLY_INIT_F=y
  25 CONFIG_SPL_DMA_SUPPORT=y
  26 CONFIG_SPL_FS_EXT4=y
  27 CONFIG_SPL_I2C_SUPPORT=y
  28 CONFIG_SPL_SPI_LOAD=y
  29 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
  30 CONFIG_SPL_WATCHDOG_SUPPORT=y
  31 CONFIG_SPL_YMODEM_SUPPORT=y
  32 # CONFIG_CMD_FLASH is not set
  33 CONFIG_CMD_GPIO=y
  34 CONFIG_CMD_I2C=y
  35 CONFIG_CMD_MMC=y
  36 # CONFIG_CMD_NAND is not set
  37 CONFIG_CMD_SF=y
  38 CONFIG_CMD_CACHE=y
  39 CONFIG_CMD_EXT4_WRITE=y
  40 CONFIG_CMD_MTDPARTS=y
  41 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
  42 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
  43 CONFIG_CMD_UBI=y
  44 # CONFIG_SPL_PARTITION_UUIDS is not set
  45 CONFIG_DM=y
  46 CONFIG_FSL_USDHC=y
  47 CONFIG_MTD=y
  48 CONFIG_NAND=y
  49 CONFIG_NAND_MXS=y
  50 CONFIG_SPI_FLASH=y
  51 CONFIG_SF_DEFAULT_BUS=2
  52 CONFIG_SF_DEFAULT_MODE=0
  53 CONFIG_SF_DEFAULT_SPEED=20000000
  54 CONFIG_SPI_FLASH_STMICRO=y
  55 CONFIG_PHYLIB=y
  56 CONFIG_PHY_MICREL=y
  57 CONFIG_PHY_MICREL_KSZ90X1=y
  58 CONFIG_FEC_MXC=y
  59 CONFIG_MII=y
  60 CONFIG_SPI=y
  61 CONFIG_MXC_SPI=y
  62 CONFIG_DM_THERMAL=y
  63 CONFIG_OF_LIBFDT=y