configs/brppt1_spi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_OMAP2PLUS=y
   3 CONFIG_SPL_GPIO_SUPPORT=y
   4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   6 CONFIG_SYS_MALLOC_F_LEN=0x4000
   7 CONFIG_AM33XX=y
   8 CONFIG_TARGET_BRPPT1=y
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_ENV_SIZE=0x10000
  11 CONFIG_ENV_OFFSET=0x20000
  12 CONFIG_NR_DRAM_BANKS=1
  13 CONFIG_SPL=y
  14 CONFIG_ENV_SECT_SIZE=0x10000
  15 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  16 CONFIG_SPL_SPI_SUPPORT=y
  17 CONFIG_TPL_SYS_MALLOC_F_LEN=0x0
  18 # CONFIG_EXPERT is not set
  19 # CONFIG_FIT is not set
  20 CONFIG_OF_BOARD_SETUP=y
  21 CONFIG_SPI_BOOT=y
  22 CONFIG_BOOTDELAY=0
  23 CONFIG_USE_BOOTCOMMAND=y
  24 CONFIG_BOOTCOMMAND="run b_default"
  25 CONFIG_USE_PREBOOT=y
  26 CONFIG_PREBOOT="run cfgscr; run brdefaultip"
  27 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  28 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
  29 CONFIG_SYS_CONSOLE_INFO_QUIET=y
  30 CONFIG_VERSION_VARIABLE=y
  31 # CONFIG_DISPLAY_CPUINFO is not set
  32 # CONFIG_DISPLAY_BOARDINFO is not set
  33 CONFIG_ARCH_MISC_INIT=y
  34 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  35 CONFIG_SPL_SEPARATE_BSS=y
  36 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
  37 CONFIG_SPL_I2C_SUPPORT=y
  38 # CONFIG_SPL_NAND_SUPPORT is not set
  39 CONFIG_SPL_POWER_SUPPORT=y
  40 CONFIG_SPL_SPI_LOAD=y
  41 CONFIG_SPL_WATCHDOG_SUPPORT=y
  42 CONFIG_SPL_YMODEM_SUPPORT=y
  43 CONFIG_HUSH_PARSER=y
  44 CONFIG_CMD_BOOTZ=y
  45 # CONFIG_CMD_IMI is not set
  46 # CONFIG_CMD_XIMG is not set
  47 # CONFIG_CMD_EDITENV is not set
  48 # CONFIG_CMD_CRC32 is not set
  49 # CONFIG_CMD_FLASH is not set
  50 CONFIG_CMD_GPIO=y
  51 CONFIG_CMD_I2C=y
  52 # CONFIG_CMD_LOADS is not set
  53 CONFIG_CMD_MMC=y
  54 CONFIG_CMD_PART=y
  55 CONFIG_CMD_SF=y
  56 CONFIG_CMD_USB=y
  57 # CONFIG_CMD_ITEST is not set
  58 CONFIG_CMD_DHCP=y
  59 # CONFIG_CMD_NFS is not set
  60 CONFIG_CMD_MII=y
  61 CONFIG_CMD_PING=y
  62 CONFIG_CMD_BOOTCOUNT=y
  63 CONFIG_CMD_BKOPS_ENABLE=y
  64 CONFIG_CMD_CACHE=y
  65 CONFIG_CMD_TIME=y
  66 CONFIG_CMD_EXT4=y
  67 CONFIG_CMD_EXT4_WRITE=y
  68 CONFIG_CMD_FAT=y
  69 CONFIG_CMD_FS_GENERIC=y
  70 # CONFIG_SPL_DOS_PARTITION is not set
  71 CONFIG_OF_CONTROL=y
  72 CONFIG_SPL_OF_CONTROL=y
  73 CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-spi"
  74 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
  75 CONFIG_ENV_IS_IN_SPI_FLASH=y
  76 CONFIG_NET_RANDOM_ETHADDR=y
  77 CONFIG_DM=y
  78 CONFIG_SPL_DM=y
  79 CONFIG_SPL_DM_SEQ_ALIAS=y
  80 # CONFIG_OF_TRANSLATE is not set
  81 CONFIG_BOOTCOUNT_LIMIT=y
  82 CONFIG_DM_GPIO=y
  83 CONFIG_DM_I2C=y
  84 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  85 CONFIG_MISC=y
  86 CONFIG_DM_MMC=y
  87 CONFIG_MMC_OMAP_HS=y
  88 CONFIG_MTD_DEVICE=y
  89 CONFIG_DM_SPI_FLASH=y
  90 CONFIG_SPI_FLASH=y
  91 CONFIG_SF_DEFAULT_SPEED=24000000
  92 CONFIG_SPI_FLASH_STMICRO=y
  93 CONFIG_SPI_FLASH_WINBOND=y
  94 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  95 CONFIG_PHY_NATSEMI=y
  96 CONFIG_DM_ETH=y
  97 CONFIG_DRIVER_TI_CPSW=y
  98 CONFIG_DM_SERIAL=y
  99 CONFIG_SPI=y
 100 CONFIG_DM_SPI=y
 101 CONFIG_OMAP3_SPI=y
 102 CONFIG_USB=y
 103 CONFIG_DM_USB=y
 104 CONFIG_USB_MUSB_HOST=y
 105 CONFIG_USB_MUSB_GADGET=y
 106 CONFIG_USB_MUSB_TI=y
 107 CONFIG_USB_STORAGE=y
 108 CONFIG_USB_GADGET=y
 109 CONFIG_FAT_WRITE=y
 110 CONFIG_LZO=y
 111 # CONFIG_OF_LIBFDT_OVERLAY is not set
 112 # CONFIG_EFI_LOADER is not set