cmd/tsi148.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2009 Reinhard Arlt, reinhard.arlt@esd-electronics.com
   4  *
   5  * base on universe.h by
   6  *
   7  * (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
   8  */
   9
  10 #include <common.h>
  11 #include <command.h>
  12 #include <malloc.h>
  13 #include <asm/io.h>
  14 #include <pci.h>
  15
  16 #include <tsi148.h>
  17
  18 #define LPCI_VENDOR PCI_VENDOR_ID_TUNDRA
  19 #define LPCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148
  20
  21 typedef struct _TSI148_DEV TSI148_DEV;
  22
  23 struct _TSI148_DEV {
  24         int           bus;
  25         pci_dev_t     busdevfn;
  26         TSI148       *uregs;
  27         unsigned int  pci_bs;
  28 };
  29
  30 static TSI148_DEV *dev;
  31
  32 /*
  33  * Most of the TSI148 register are BIGENDIAN
  34  * This is the reason for the __raw_writel(htonl(x), x) usage!
  35  */
  36
  37 int tsi148_init(void)
  38 {
  39         int j, result;
  40         pci_dev_t busdevfn;
  41         unsigned int val;
  42
  43         busdevfn = pci_find_device(LPCI_VENDOR, LPCI_DEVICE, 0);
  44         if (busdevfn == -1) {
  45                 puts("Tsi148: No Tundra Tsi148 found!\n");
  46                 return -1;
  47         }
  48
  49         /* Lets turn Latency off */
  50         pci_write_config_dword(busdevfn, 0x0c, 0);
  51
  52         dev = malloc(sizeof(*dev));
  53         if (NULL == dev) {
  54                 puts("Tsi148: No memory!\n");
  55                 return -1;
  56         }
  57
  58         memset(dev, 0, sizeof(*dev));
  59         dev->busdevfn = busdevfn;
  60
  61         pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
  62         val &= ~0xf;
  63         dev->uregs = (TSI148 *)val;
  64
  65         debug("Tsi148: Base    : %p\n", dev->uregs);
  66
  67         /* check mapping */
  68         debug("Tsi148: Read via mapping, PCI_ID = %08X\n",
  69               readl(&dev->uregs->pci_id));
  70         if (((LPCI_DEVICE << 16) | LPCI_VENDOR) != readl(&dev->uregs->pci_id)) {
  71                 printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n",
  72                        readl(&dev->uregs->pci_id));
  73                 result = -1;
  74                 goto break_30;
  75         }
  76
  77         debug("Tsi148: PCI_BS = %08X\n", readl(&dev->uregs->pci_mbarl));
  78
  79         dev->pci_bs = readl(&dev->uregs->pci_mbarl);
  80
  81         /* turn off windows */
  82         for (j = 0; j < 8; j++) {
  83                 __raw_writel(htonl(0x00000000), &dev->uregs->outbound[j].otat);
  84                 __raw_writel(htonl(0x00000000), &dev->uregs->inbound[j].itat);
  85         }
  86
  87         /* Tsi148 VME timeout etc */
  88         __raw_writel(htonl(0x00000084), &dev->uregs->vctrl);
  89
  90 #ifdef DEBUG
  91         if ((__raw_readl(&dev->uregs->vstat) & 0x00000100) != 0)
  92                 printf("Tsi148: System Controller!\n");
  93         else
  94                 printf("Tsi148: Not System Controller!\n");
  95 #endif
  96
  97         /*
  98          * Lets turn off interrupts
  99          */
 100         /* Disable interrupts in Tsi148 first */
 101         __raw_writel(htonl(0x00000000), &dev->uregs->inten);
 102         /* Disable interrupt out */
 103         __raw_writel(htonl(0x00000000), &dev->uregs->inteo);
 104         eieio();
 105         /* Reset all IRQ's */
 106         __raw_writel(htonl(0x03ff3f00), &dev->uregs->intc);
 107         /* Map all ints to 0 */
 108         __raw_writel(htonl(0x00000000), &dev->uregs->intm1);
 109         __raw_writel(htonl(0x00000000), &dev->uregs->intm2);
 110         eieio();
 111
 112         val = __raw_readl(&dev->uregs->vstat);
 113         val &= ~(0x00004000);
 114         __raw_writel(val, &dev->uregs->vstat);
 115         eieio();
 116
 117         debug("Tsi148: register struct size %08x\n", sizeof(TSI148));
 118
 119         return 0;
 120
 121  break_30:
 122         free(dev);
 123         dev = NULL;
 124
 125         return result;
 126 }
 127
 128 /*
 129  * Create pci slave window (access: pci -> vme)
 130  */
 131 int tsi148_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr,
 132                             int size, int vam, int vdw)
 133 {
 134         int result, i;
 135         unsigned int ctl = 0;
 136
 137         if (NULL == dev) {
 138                 result = -1;
 139                 goto exit_10;
 140         }
 141
 142         for (i = 0; i < 8; i++) {
 143                 if (0x00000000 == readl(&dev->uregs->outbound[i].otat))
 144                         break;
 145         }
 146
 147         if (i > 7) {
 148                 printf("Tsi148: No Image available\n");
 149                 result = -1;
 150                 goto exit_10;
 151         }
 152
 153         debug("Tsi148: Using image %d\n", i);
 154
 155         printf("Tsi148: Pci addr %08x\n", pciAddr);
 156
 157         __raw_writel(htonl(pciAddr), &dev->uregs->outbound[i].otsal);
 158         __raw_writel(0x00000000, &dev->uregs->outbound[i].otsau);
 159         __raw_writel(htonl(pciAddr + size), &dev->uregs->outbound[i].oteal);
 160         __raw_writel(0x00000000, &dev->uregs->outbound[i].oteau);
 161         __raw_writel(htonl(vmeAddr - pciAddr), &dev->uregs->outbound[i].otofl);
 162         __raw_writel(0x00000000, &dev->uregs->outbound[i].otofu);
 163
 164         switch (vam & VME_AM_Axx) {
 165         case VME_AM_A16:
 166                 ctl = 0x00000000;
 167                 break;
 168         case VME_AM_A24:
 169                 ctl = 0x00000001;
 170                 break;
 171         case VME_AM_A32:
 172                 ctl = 0x00000002;
 173                 break;
 174         }
 175
 176         switch (vam & VME_AM_Mxx) {
 177         case VME_AM_DATA:
 178                 ctl |= 0x00000000;
 179                 break;
 180         case VME_AM_PROG:
 181                 ctl |= 0x00000010;
 182                 break;
 183         }
 184
 185         if (vam & VME_AM_SUP)
 186                 ctl |= 0x00000020;
 187
 188         switch (vdw & VME_FLAG_Dxx) {
 189         case VME_FLAG_D16:
 190                 ctl |= 0x00000000;
 191                 break;
 192         case VME_FLAG_D32:
 193                 ctl |= 0x00000040;
 194                 break;
 195         }
 196
 197         ctl |= 0x80040000;      /* enable, no prefetch */
 198
 199         __raw_writel(htonl(ctl), &dev->uregs->outbound[i].otat);
 200
 201         debug("Tsi148: window-addr                =%p\n",
 202               &dev->uregs->outbound[i].otsau);
 203         debug("Tsi148: pci slave window[%d] attr  =%08x\n",
 204               i, ntohl(__raw_readl(&dev->uregs->outbound[i].otat)));
 205         debug("Tsi148: pci slave window[%d] start =%08x\n",
 206               i, ntohl(__raw_readl(&dev->uregs->outbound[i].otsal)));
 207         debug("Tsi148: pci slave window[%d] end   =%08x\n",
 208               i, ntohl(__raw_readl(&dev->uregs->outbound[i].oteal)));
 209         debug("Tsi148: pci slave window[%d] offset=%08x\n",
 210               i, ntohl(__raw_readl(&dev->uregs->outbound[i].otofl)));
 211
 212         return 0;
 213
 214  exit_10:
 215         return -result;
 216 }
 217
 218 unsigned int tsi148_eval_vam(int vam)
 219 {
 220         unsigned int ctl = 0;
 221
 222         switch (vam & VME_AM_Axx) {
 223         case VME_AM_A16:
 224                 ctl = 0x00000000;
 225                 break;
 226         case VME_AM_A24:
 227                 ctl = 0x00000010;
 228                 break;
 229         case VME_AM_A32:
 230                 ctl = 0x00000020;
 231                 break;
 232         }
 233         switch (vam & VME_AM_Mxx) {
 234         case VME_AM_DATA:
 235                 ctl |= 0x00000001;
 236                 break;
 237         case VME_AM_PROG:
 238                 ctl |= 0x00000002;
 239                 break;
 240         case (VME_AM_PROG | VME_AM_DATA):
 241                 ctl |= 0x00000003;
 242                 break;
 243         }
 244
 245         if (vam & VME_AM_SUP)
 246                 ctl |= 0x00000008;
 247         if (vam & VME_AM_USR)
 248                 ctl |= 0x00000004;
 249
 250         return ctl;
 251 }
 252
 253 /*
 254  * Create vme slave window (access: vme -> pci)
 255  */
 256 int tsi148_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr,
 257                             int size, int vam)
 258 {
 259         int result, i;
 260         unsigned int ctl = 0;
 261
 262         if (NULL == dev) {
 263                 result = -1;
 264                 goto exit_10;
 265         }
 266
 267         for (i = 0; i < 8; i++) {
 268                 if (0x00000000 == readl(&dev->uregs->inbound[i].itat))
 269                         break;
 270         }
 271
 272         if (i > 7) {
 273                 printf("Tsi148: No Image available\n");
 274                 result = -1;
 275                 goto exit_10;
 276         }
 277
 278         debug("Tsi148: Using image %d\n", i);
 279
 280         __raw_writel(htonl(vmeAddr), &dev->uregs->inbound[i].itsal);
 281         __raw_writel(0x00000000, &dev->uregs->inbound[i].itsau);
 282         __raw_writel(htonl(vmeAddr + size), &dev->uregs->inbound[i].iteal);
 283         __raw_writel(0x00000000, &dev->uregs->inbound[i].iteau);
 284         __raw_writel(htonl(pciAddr - vmeAddr), &dev->uregs->inbound[i].itofl);
 285         if (vmeAddr > pciAddr)
 286                 __raw_writel(0xffffffff, &dev->uregs->inbound[i].itofu);
 287         else
 288                 __raw_writel(0x00000000, &dev->uregs->inbound[i].itofu);
 289
 290         ctl = tsi148_eval_vam(vam);
 291         ctl |= 0x80000000;      /* enable */
 292         __raw_writel(htonl(ctl), &dev->uregs->inbound[i].itat);
 293
 294         debug("Tsi148: window-addr                =%p\n",
 295               &dev->uregs->inbound[i].itsau);
 296         debug("Tsi148: vme slave window[%d] attr  =%08x\n",
 297               i, ntohl(__raw_readl(&dev->uregs->inbound[i].itat)));
 298         debug("Tsi148: vme slave window[%d] start =%08x\n",
 299               i, ntohl(__raw_readl(&dev->uregs->inbound[i].itsal)));
 300         debug("Tsi148: vme slave window[%d] end   =%08x\n",
 301               i, ntohl(__raw_readl(&dev->uregs->inbound[i].iteal)));
 302         debug("Tsi148: vme slave window[%d] offset=%08x\n",
 303               i, ntohl(__raw_readl(&dev->uregs->inbound[i].itofl)));
 304
 305         return 0;
 306
 307  exit_10:
 308         return -result;
 309 }
 310
 311 /*
 312  * Create vme slave window (access: vme -> gcsr)
 313  */
 314 int tsi148_vme_gcsr_window(unsigned int vmeAddr, int vam)
 315 {
 316         int result;
 317         unsigned int ctl;
 318
 319         result = 0;
 320
 321         if (NULL == dev) {
 322                 result = 1;
 323         } else {
 324                 __raw_writel(htonl(vmeAddr), &dev->uregs->gbal);
 325                 __raw_writel(0x00000000, &dev->uregs->gbau);
 326
 327                 ctl = tsi148_eval_vam(vam);
 328                 ctl |= 0x00000080;      /* enable */
 329                 __raw_writel(htonl(ctl), &dev->uregs->gcsrat);
 330         }
 331
 332         return result;
 333 }
 334
 335 /*
 336  * Create vme slave window (access: vme -> crcsr)
 337  */
 338 int tsi148_vme_crcsr_window(unsigned int vmeAddr)
 339 {
 340         int result;
 341         unsigned int ctl;
 342
 343         result = 0;
 344
 345         if (NULL == dev) {
 346                 result = 1;
 347         } else {
 348                 __raw_writel(htonl(vmeAddr), &dev->uregs->crol);
 349                 __raw_writel(0x00000000, &dev->uregs->crou);
 350
 351                 ctl = 0x00000080;       /* enable */
 352                 __raw_writel(htonl(ctl), &dev->uregs->crat);
 353         }
 354
 355         return result;
 356 }
 357
 358 /*
 359  * Create vme slave window (access: vme -> crg)
 360  */
 361 int tsi148_vme_crg_window(unsigned int vmeAddr, int vam)
 362 {
 363         int result;
 364         unsigned int ctl;
 365
 366         result = 0;
 367
 368         if (NULL == dev) {
 369                 result = 1;
 370         } else {
 371                 __raw_writel(htonl(vmeAddr), &dev->uregs->cbal);
 372                 __raw_writel(0x00000000, &dev->uregs->cbau);
 373
 374                 ctl = tsi148_eval_vam(vam);
 375                 ctl |= 0x00000080;      /* enable */
 376                 __raw_writel(htonl(ctl), &dev->uregs->crgat);
 377         }
 378
 379         return result;
 380 }
 381
 382 /*
 383  * Tundra Tsi148 configuration
 384  */
 385 int do_tsi148(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 386 {
 387         ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, vdw = 0;
 388         char cmd = 'x';
 389
 390         /* get parameter */
 391         if (argc > 1)
 392                 cmd = argv[1][0];
 393         if (argc > 2)
 394                 addr1 = simple_strtoul(argv[2], NULL, 16);
 395         if (argc > 3)
 396                 addr2 = simple_strtoul(argv[3], NULL, 16);
 397         if (argc > 4)
 398                 size = simple_strtoul(argv[4], NULL, 16);
 399         if (argc > 5)
 400                 vam = simple_strtoul(argv[5], NULL, 16);
 401         if (argc > 6)
 402                 vdw = simple_strtoul(argv[6], NULL, 16);
 403
 404         switch (cmd) {
 405         case 'c':
 406                 if (strcmp(argv[1], "crg") == 0) {
 407                         vam = addr2;
 408                         printf("Tsi148: Configuring VME CRG Window "
 409                                "(VME->CRG):\n");
 410                         printf("  vme=%08lx vam=%02lx\n", addr1, vam);
 411                         tsi148_vme_crg_window(addr1, vam);
 412                 } else {
 413                         printf("Tsi148: Configuring VME CR/CSR Window "
 414                                "(VME->CR/CSR):\n");
 415                         printf("  pci=%08lx\n", addr1);
 416                         tsi148_vme_crcsr_window(addr1);
 417                 }
 418                 break;
 419         case 'i':               /* init */
 420                 tsi148_init();
 421                 break;
 422         case 'g':
 423                 vam = addr2;
 424                 printf("Tsi148: Configuring VME GCSR Window (VME->GCSR):\n");
 425                 printf("  vme=%08lx vam=%02lx\n", addr1, vam);
 426                 tsi148_vme_gcsr_window(addr1, vam);
 427                 break;
 428         case 'v':               /* vme */
 429                 printf("Tsi148: Configuring VME Slave Window (VME->PCI):\n");
 430                 printf("  vme=%08lx pci=%08lx size=%08lx vam=%02lx\n",
 431                        addr1, addr2, size, vam);
 432                 tsi148_vme_slave_window(addr1, addr2, size, vam);
 433                 break;
 434         case 'p':               /* pci */
 435                 printf("Tsi148: Configuring PCI Slave Window (PCI->VME):\n");
 436                 printf("  pci=%08lx vme=%08lx size=%08lx vam=%02lx vdw=%02lx\n",
 437                        addr1, addr2, size, vam, vdw);
 438                 tsi148_pci_slave_window(addr1, addr2, size, vam, vdw);
 439                 break;
 440         default:
 441                 printf("Tsi148: Command %s not supported!\n", argv[1]);
 442         }
 443
 444         return 0;
 445 }
 446
 447 U_BOOT_CMD(
 448         tsi148, 7,      1,      do_tsi148,
 449         "initialize and configure Turndra Tsi148\n",
 450         "init\n"
 451         "    - initialize tsi148\n"
 452         "tsi148 vme   [vme_addr] [pci_addr] [size] [vam]\n"
 453         "    - create vme slave window (access: vme->pci)\n"
 454         "tsi148 pci   [pci_addr] [vme_addr] [size] [vam] [vdw]\n"
 455         "    - create pci slave window (access: pci->vme)\n"
 456         "tsi148 crg   [vme_addr] [vam]\n"
 457         "    - create vme slave window: (access vme->CRG\n"
 458         "tsi148 crcsr [pci_addr]\n"
 459         "    - create vme slave window: (access vme->CR/CSR\n"
 460         "tsi148 gcsr  [vme_addr] [vam]\n"
 461         "    - create vme slave window: (access vme->GCSR\n"
 462         "    [vam] = VMEbus Address-Modifier:  01 -> A16 Address Space\n"
 463         "                                      02 -> A24 Address Space\n"
 464         "                                      03 -> A32 Address Space\n"
 465         "                                      04 -> Usr        AM Code\n"
 466         "                                      08 -> Supervisor AM Code\n"
 467         "                                      10 -> Data AM Code\n"
 468         "                                      20 -> Program AM Code\n"
 469         "    [vdw] = VMEbus Maximum Datawidth: 02 -> D16 Data Width\n"
 470         "                                      03 -> D32 Data Width\n"
 471 );