board/toradex/apalis_imx6/apalis_imx6.c

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
   4  * Copyright (C) 2014-2016, Toradex AG
   5  * copied from nitrogen6x
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <asm/arch/clock.h>
  12 #include <asm/arch/crm_regs.h>
  13 #include <asm/arch/mxc_hdmi.h>
  14 #include <asm/arch/imx-regs.h>
  15 #include <asm/arch/iomux.h>
  16 #include <asm/arch/sys_proto.h>
  17 #include <asm/arch/mx6-pins.h>
  18 #include <asm/arch/mx6-ddr.h>
  19 #include <asm/bootm.h>
  20 #include <asm/gpio.h>
  21 #include <asm/io.h>
  22 #include <asm/imx-common/iomux-v3.h>
  23 #include <asm/imx-common/mxc_i2c.h>
  24 #include <asm/imx-common/sata.h>
  25 #include <asm/imx-common/boot_mode.h>
  26 #include <asm/imx-common/video.h>
  27 #include <dm/platform_data/serial_mxc.h>
  28 #include <dm/platdata.h>
  29 #include <fsl_esdhc.h>
  30 #include <i2c.h>
  31 #include <imx_thermal.h>
  32 #include <linux/errno.h>
  33 #include <malloc.h>
  34 #include <mmc.h>
  35 #include <micrel.h>
  36 #include <miiphy.h>
  37 #include <netdev.h>
  38
  39 #include "../common/tdx-cfg-block.h"
  40 #ifdef CONFIG_TDX_CMD_IMX_MFGR
  41 #include "pf0100.h"
  42 #endif
  43
  44 DECLARE_GLOBAL_DATA_PTR;
  45
  46 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  47         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  48         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  49
  50 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                    \
  51         PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
  52         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  53
  54 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  55         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  56
  57 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED |         \
  58         PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
  59
  60 #define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP |                  \
  61         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  62
  63 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP |                  \
  64         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  65         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  66
  67 #define WEAK_PULLUP     (PAD_CTL_PUS_100K_UP |                  \
  68         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  69         PAD_CTL_SRE_SLOW)
  70
  71 #define NO_PULLUP       (                                       \
  72         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  73         PAD_CTL_SRE_SLOW)
  74
  75 #define WEAK_PULLDOWN   (PAD_CTL_PUS_100K_DOWN |                \
  76         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  77         PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
  78
  79 #define TRISTATE        (PAD_CTL_HYS | PAD_CTL_SPEED_MED)
  80
  81 #define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
  82
  83 #define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST)
  84
  85 int dram_init(void)
  86 {
  87         /* use the DDR controllers configured size */
  88         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
  89                                     (ulong)imx_ddr_size());
  90
  91         return 0;
  92 }
  93
  94 /* Apalis UART1 */
  95 iomux_v3_cfg_t const uart1_pads_dce[] = {
  96         MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  97         MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  98 };
  99 iomux_v3_cfg_t const uart1_pads_dte[] = {
 100         MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 101         MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 102 };
 103
 104 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 105 /* Apalis I2C1 */
 106 struct i2c_pads_info i2c_pad_info1 = {
 107         .scl = {
 108                 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
 109                 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
 110                 .gp = IMX_GPIO_NR(5, 27)
 111         },
 112         .sda = {
 113                 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
 114                 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
 115                 .gp = IMX_GPIO_NR(5, 26)
 116         }
 117 };
 118
 119 /* Apalis local, PMIC, SGTL5000, STMPE811 */
 120 struct i2c_pads_info i2c_pad_info_loc = {
 121         .scl = {
 122                 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
 123                 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
 124                 .gp = IMX_GPIO_NR(4, 12)
 125         },
 126         .sda = {
 127                 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
 128                 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
 129                 .gp = IMX_GPIO_NR(4, 13)
 130         }
 131 };
 132
 133 /* Apalis I2C3 / CAM */
 134 struct i2c_pads_info i2c_pad_info3 = {
 135         .scl = {
 136                 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
 137                 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
 138                 .gp = IMX_GPIO_NR(3, 17)
 139         },
 140         .sda = {
 141                 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
 142                 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
 143                 .gp = IMX_GPIO_NR(3, 18)
 144         }
 145 };
 146
 147 /* Apalis I2C2 / DDC */
 148 struct i2c_pads_info i2c_pad_info_ddc = {
 149         .scl = {
 150                 .i2c_mode = MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL | PC,
 151                 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
 152                 .gp = IMX_GPIO_NR(2, 30)
 153         },
 154         .sda = {
 155                 .i2c_mode = MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA | PC,
 156                 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
 157                 .gp = IMX_GPIO_NR(3, 16)
 158         }
 159 };
 160
 161 /* Apalis MMC1 */
 162 iomux_v3_cfg_t const usdhc1_pads[] = {
 163         MX6_PAD_SD1_CLK__SD1_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 164         MX6_PAD_SD1_CMD__SD1_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 165         MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 166         MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 167         MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 168         MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 169         MX6_PAD_NANDF_D0__SD1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 170         MX6_PAD_NANDF_D1__SD1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 171         MX6_PAD_NANDF_D2__SD1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 172         MX6_PAD_NANDF_D3__SD1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 173         MX6_PAD_DI0_PIN4__GPIO4_IO20   | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 174 #       define GPIO_MMC_CD IMX_GPIO_NR(4, 20)
 175 };
 176
 177 /* Apalis SD1 */
 178 iomux_v3_cfg_t const usdhc2_pads[] = {
 179         MX6_PAD_SD2_CLK__SD2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 180         MX6_PAD_SD2_CMD__SD2_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 181         MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 182         MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 183         MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 184         MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 185         MX6_PAD_NANDF_CS1__GPIO6_IO14  | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 186 #       define GPIO_SD_CD IMX_GPIO_NR(6, 14)
 187 };
 188
 189 /* eMMC */
 190 iomux_v3_cfg_t const usdhc3_pads[] = {
 191         MX6_PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 192         MX6_PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 193         MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 194         MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 195         MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 196         MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 197         MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 198         MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 199         MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 200         MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 201         MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
 202 };
 203
 204 int mx6_rgmii_rework(struct phy_device *phydev)
 205 {
 206         /* control data pad skew - devaddr = 0x02, register = 0x04 */
 207         ksz9031_phy_extended_write(phydev, 0x02,
 208                                    MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
 209                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 210         /* rx data pad skew - devaddr = 0x02, register = 0x05 */
 211         ksz9031_phy_extended_write(phydev, 0x02,
 212                                    MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
 213                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 214         /* tx data pad skew - devaddr = 0x02, register = 0x05 */
 215         ksz9031_phy_extended_write(phydev, 0x02,
 216                                    MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
 217                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 218         /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
 219         ksz9031_phy_extended_write(phydev, 0x02,
 220                                    MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
 221                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
 222         return 0;
 223 }
 224
 225 iomux_v3_cfg_t const enet_pads[] = {
 226         MX6_PAD_ENET_MDIO__ENET_MDIO            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 227         MX6_PAD_ENET_MDC__ENET_MDC              | MUX_PAD_CTRL(ENET_PAD_CTRL),
 228         MX6_PAD_RGMII_TXC__RGMII_TXC            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 229         MX6_PAD_RGMII_TD0__RGMII_TD0            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 230         MX6_PAD_RGMII_TD1__RGMII_TD1            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 231         MX6_PAD_RGMII_TD2__RGMII_TD2            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 232         MX6_PAD_RGMII_TD3__RGMII_TD3            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 233         MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
 234         MX6_PAD_ENET_REF_CLK__ENET_TX_CLK       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 235         MX6_PAD_RGMII_RXC__RGMII_RXC            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 236         MX6_PAD_RGMII_RD0__RGMII_RD0            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 237         MX6_PAD_RGMII_RD1__RGMII_RD1            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 238         MX6_PAD_RGMII_RD2__RGMII_RD2            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 239         MX6_PAD_RGMII_RD3__RGMII_RD3            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 240         MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
 241         /* KSZ9031 PHY Reset */
 242         MX6_PAD_ENET_CRS_DV__GPIO1_IO25         | MUX_PAD_CTRL(NO_PAD_CTRL),
 243 #       define GPIO_ENET_PHY_RESET IMX_GPIO_NR(1, 25)
 244 };
 245
 246 static void setup_iomux_enet(void)
 247 {
 248         imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 249 }
 250
 251 static int reset_enet_phy(struct mii_dev *bus)
 252 {
 253         /* Reset KSZ9031 PHY */
 254         gpio_direction_output(GPIO_ENET_PHY_RESET, 0);
 255         mdelay(10);
 256         gpio_set_value(GPIO_ENET_PHY_RESET, 1);
 257
 258         return 0;
 259 }
 260
 261 /* mux the Apalis GPIO pins, so they can be used from the U-Boot cmdline */
 262 iomux_v3_cfg_t const gpio_pads[] = {
 263         /* Apalis GPIO1 - GPIO8 */
 264         MX6_PAD_NANDF_D4__GPIO2_IO04    | MUX_PAD_CTRL(WEAK_PULLUP),
 265         MX6_PAD_NANDF_D5__GPIO2_IO05    | MUX_PAD_CTRL(WEAK_PULLUP),
 266         MX6_PAD_NANDF_D6__GPIO2_IO06    | MUX_PAD_CTRL(WEAK_PULLUP),
 267         MX6_PAD_NANDF_D7__GPIO2_IO07    | MUX_PAD_CTRL(WEAK_PULLUP),
 268         MX6_PAD_NANDF_RB0__GPIO6_IO10   | MUX_PAD_CTRL(WEAK_PULLUP),
 269         MX6_PAD_NANDF_WP_B__GPIO6_IO09  | MUX_PAD_CTRL(WEAK_PULLUP),
 270         MX6_PAD_GPIO_2__GPIO1_IO02      | MUX_PAD_CTRL(WEAK_PULLDOWN),
 271         MX6_PAD_GPIO_6__GPIO1_IO06      | MUX_PAD_CTRL(WEAK_PULLUP),
 272         MX6_PAD_GPIO_4__GPIO1_IO04      | MUX_PAD_CTRL(WEAK_PULLUP),
 273 };
 274
 275 static void setup_iomux_gpio(void)
 276 {
 277         imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
 278 }
 279
 280 iomux_v3_cfg_t const usb_pads[] = {
 281         /* USBH_EN */
 282         MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
 283 #       define GPIO_USBH_EN IMX_GPIO_NR(1, 0)
 284         /* USB_VBUS_DET */
 285         MX6_PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
 286 #       define GPIO_USB_VBUS_DET IMX_GPIO_NR(3, 28)
 287         /* USBO1_ID */
 288         MX6_PAD_ENET_RX_ER__USB_OTG_ID  | MUX_PAD_CTRL(WEAK_PULLUP),
 289         /* USBO1_EN */
 290         MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
 291 #       define GPIO_USBO_EN IMX_GPIO_NR(3, 22)
 292 };
 293
 294 /*
 295  * UARTs are used in DTE mode, switch the mode on all UARTs before
 296  * any pinmuxing connects a (DCE) output to a transceiver output.
 297  */
 298 #define UFCR            0x90    /* FIFO Control Register */
 299 #define UFCR_DCEDTE     (1<<6)  /* DCE=0 */
 300
 301 static void setup_dtemode_uart(void)
 302 {
 303         setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
 304         setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
 305         setbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE);
 306         setbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE);
 307 }
 308 static void setup_dcemode_uart(void)
 309 {
 310         clrbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
 311         clrbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
 312         clrbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE);
 313         clrbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE);
 314 }
 315
 316 static void setup_iomux_dte_uart(void)
 317 {
 318         setup_dtemode_uart();
 319         imx_iomux_v3_setup_multiple_pads(uart1_pads_dte,
 320                                          ARRAY_SIZE(uart1_pads_dte));
 321 }
 322
 323 static void setup_iomux_dce_uart(void)
 324 {
 325         setup_dcemode_uart();
 326         imx_iomux_v3_setup_multiple_pads(uart1_pads_dce,
 327                                          ARRAY_SIZE(uart1_pads_dce));
 328 }
 329
 330 #ifdef CONFIG_USB_EHCI_MX6
 331 int board_ehci_hcd_init(int port)
 332 {
 333         imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
 334         return 0;
 335 }
 336
 337 int board_ehci_power(int port, int on)
 338 {
 339         switch (port) {
 340         case 0:
 341                 /* control OTG power */
 342                 gpio_direction_output(GPIO_USBO_EN, on);
 343                 mdelay(100);
 344                 break;
 345         case 1:
 346                 /* Control MXM USBH */
 347                 gpio_direction_output(GPIO_USBH_EN, on);
 348                 mdelay(2);
 349                 /* Control onboard USB Hub VBUS */
 350                 gpio_direction_output(GPIO_USB_VBUS_DET, on);
 351                 mdelay(100);
 352                 break;
 353         default:
 354                 break;
 355         }
 356         return 0;
 357 }
 358 #endif
 359
 360 #ifdef CONFIG_FSL_ESDHC
 361 /* use the following sequence: eMMC, MMC, SD */
 362 struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
 363         {USDHC3_BASE_ADDR},
 364         {USDHC1_BASE_ADDR},
 365         {USDHC2_BASE_ADDR},
 366 };
 367
 368 int board_mmc_getcd(struct mmc *mmc)
 369 {
 370         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 371         int ret = true; /* default: assume inserted */
 372
 373         switch (cfg->esdhc_base) {
 374         case USDHC1_BASE_ADDR:
 375                 gpio_direction_input(GPIO_MMC_CD);
 376                 ret = !gpio_get_value(GPIO_MMC_CD);
 377                 break;
 378         case USDHC2_BASE_ADDR:
 379                 gpio_direction_input(GPIO_SD_CD);
 380                 ret = !gpio_get_value(GPIO_SD_CD);
 381                 break;
 382         }
 383
 384         return ret;
 385 }
 386
 387 int board_mmc_init(bd_t *bis)
 388 {
 389 #ifndef CONFIG_SPL_BUILD
 390         s32 status = 0;
 391         u32 index = 0;
 392
 393         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 394         usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 395         usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 396
 397         usdhc_cfg[0].max_bus_width = 8;
 398         usdhc_cfg[1].max_bus_width = 8;
 399         usdhc_cfg[2].max_bus_width = 4;
 400
 401         for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 402                 switch (index) {
 403                 case 0:
 404                         imx_iomux_v3_setup_multiple_pads(
 405                                 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 406                         break;
 407                 case 1:
 408                         imx_iomux_v3_setup_multiple_pads(
 409                                 usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
 410                         break;
 411                 case 2:
 412                         imx_iomux_v3_setup_multiple_pads(
 413                                 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 414                         break;
 415                 default:
 416                         printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
 417                                index + 1, CONFIG_SYS_FSL_USDHC_NUM);
 418                         return status;
 419                 }
 420
 421                 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
 422         }
 423
 424         return status;
 425 #else
 426         struct src *psrc = (struct src *)SRC_BASE_ADDR;
 427         unsigned reg = readl(&psrc->sbmr1) >> 11;
 428         /*
 429          * Upon reading BOOT_CFG register the following map is done:
 430          * Bit 11 and 12 of BOOT_CFG register can determine the current
 431          * mmc port
 432          * 0x1                  SD1
 433          * 0x2                  SD2
 434          * 0x3                  SD4
 435          */
 436
 437         switch (reg & 0x3) {
 438         case 0x0:
 439                 imx_iomux_v3_setup_multiple_pads(
 440                         usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
 441                 usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
 442                 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 443                 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
 444                 break;
 445         case 0x1:
 446                 imx_iomux_v3_setup_multiple_pads(
 447                         usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 448                 usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
 449                 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 450                 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
 451                 break;
 452         case 0x2:
 453                 imx_iomux_v3_setup_multiple_pads(
 454                         usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 455                 usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
 456                 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 457                 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
 458                 break;
 459         default:
 460                 puts("MMC boot device not available");
 461         }
 462
 463         return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 464 #endif
 465 }
 466 #endif
 467
 468 int board_phy_config(struct phy_device *phydev)
 469 {
 470         mx6_rgmii_rework(phydev);
 471         if (phydev->drv->config)
 472                 phydev->drv->config(phydev);
 473
 474         return 0;
 475 }
 476
 477 int board_eth_init(bd_t *bis)
 478 {
 479         uint32_t base = IMX_FEC_BASE;
 480         struct mii_dev *bus = NULL;
 481         struct phy_device *phydev = NULL;
 482         int ret;
 483
 484         setup_iomux_enet();
 485
 486 #ifdef CONFIG_FEC_MXC
 487         bus = fec_get_miibus(base, -1);
 488         if (!bus)
 489                 return 0;
 490         bus->reset = reset_enet_phy;
 491         /* scan PHY 4,5,6,7 */
 492         phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
 493         if (!phydev) {
 494                 free(bus);
 495                 puts("no PHY found\n");
 496                 return 0;
 497         }
 498         printf("using PHY at %d\n", phydev->addr);
 499         ret = fec_probe(bis, -1, base, bus, phydev);
 500         if (ret) {
 501                 printf("FEC MXC: %s:failed\n", __func__);
 502                 free(phydev);
 503                 free(bus);
 504         }
 505 #endif
 506         return 0;
 507 }
 508
 509 static iomux_v3_cfg_t const pwr_intb_pads[] = {
 510         /*
 511          * the bootrom sets the iomux to vselect, potentially connecting
 512          * two outputs. Set this back to GPIO
 513          */
 514         MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)
 515 };
 516
 517 #if defined(CONFIG_VIDEO_IPUV3)
 518
 519 static iomux_v3_cfg_t const backlight_pads[] = {
 520         /* Backlight on RGB connector: J15 */
 521         MX6_PAD_EIM_DA13__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
 522 #define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 13)
 523         /* additional CPU pin on BKL_PWM, keep in tristate */
 524         MX6_PAD_EIM_DA14__GPIO3_IO14 | MUX_PAD_CTRL(TRISTATE),
 525         /* Backlight PWM, used as GPIO in U-Boot */
 526         MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
 527 #define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 10)
 528         /* buffer output enable 0: buffer enabled */
 529         MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
 530 #define RGB_BACKLIGHTPWM_OE IMX_GPIO_NR(5, 2)
 531         /* PSAVE# integrated VDAC */
 532         MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
 533 #define VGA_PSAVE_NOT_GP IMX_GPIO_NR(6, 31)
 534 };
 535
 536 static iomux_v3_cfg_t const rgb_pads[] = {
 537         MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB),
 538         MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB),
 539         MX6_PAD_EIM_DA11__IPU1_DI1_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB),
 540         MX6_PAD_EIM_DA12__IPU1_DI1_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB),
 541         MX6_PAD_EIM_DA9__IPU1_DISP1_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB),
 542         MX6_PAD_EIM_DA8__IPU1_DISP1_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB),
 543         MX6_PAD_EIM_DA7__IPU1_DISP1_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB),
 544         MX6_PAD_EIM_DA6__IPU1_DISP1_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB),
 545         MX6_PAD_EIM_DA5__IPU1_DISP1_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB),
 546         MX6_PAD_EIM_DA4__IPU1_DISP1_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB),
 547         MX6_PAD_EIM_DA3__IPU1_DISP1_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB),
 548         MX6_PAD_EIM_DA2__IPU1_DISP1_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB),
 549         MX6_PAD_EIM_DA1__IPU1_DISP1_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB),
 550         MX6_PAD_EIM_DA0__IPU1_DISP1_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB),
 551         MX6_PAD_EIM_EB1__IPU1_DISP1_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB),
 552         MX6_PAD_EIM_EB0__IPU1_DISP1_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB),
 553         MX6_PAD_EIM_A17__IPU1_DISP1_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB),
 554         MX6_PAD_EIM_A18__IPU1_DISP1_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB),
 555         MX6_PAD_EIM_A19__IPU1_DISP1_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB),
 556         MX6_PAD_EIM_A20__IPU1_DISP1_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB),
 557         MX6_PAD_EIM_A21__IPU1_DISP1_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB),
 558         MX6_PAD_EIM_A22__IPU1_DISP1_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB),
 559         MX6_PAD_EIM_A23__IPU1_DISP1_DATA18 | MUX_PAD_CTRL(OUTPUT_RGB),
 560         MX6_PAD_EIM_A24__IPU1_DISP1_DATA19 | MUX_PAD_CTRL(OUTPUT_RGB),
 561         MX6_PAD_EIM_D26__IPU1_DISP1_DATA22 | MUX_PAD_CTRL(OUTPUT_RGB),
 562         MX6_PAD_EIM_D27__IPU1_DISP1_DATA23 | MUX_PAD_CTRL(OUTPUT_RGB),
 563         MX6_PAD_EIM_D30__IPU1_DISP1_DATA21 | MUX_PAD_CTRL(OUTPUT_RGB),
 564         MX6_PAD_EIM_D31__IPU1_DISP1_DATA20 | MUX_PAD_CTRL(OUTPUT_RGB),
 565 };
 566
 567 static iomux_v3_cfg_t const vga_pads[] = {
 568 #ifdef FOR_DL_SOLO
 569         /* DualLite/Solo doesn't have IPU2 */
 570         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
 571         MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
 572         MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
 573         MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
 574         MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
 575         MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
 576         MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
 577         MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
 578         MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
 579         MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
 580         MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
 581         MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
 582         MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
 583         MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
 584         MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
 585         MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
 586         MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
 587         MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
 588         MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
 589         MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
 590 #else
 591         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
 592         MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15,
 593         MX6_PAD_DI0_PIN2__IPU2_DI0_PIN02,
 594         MX6_PAD_DI0_PIN3__IPU2_DI0_PIN03,
 595         MX6_PAD_DISP0_DAT0__IPU2_DISP0_DATA00,
 596         MX6_PAD_DISP0_DAT1__IPU2_DISP0_DATA01,
 597         MX6_PAD_DISP0_DAT2__IPU2_DISP0_DATA02,
 598         MX6_PAD_DISP0_DAT3__IPU2_DISP0_DATA03,
 599         MX6_PAD_DISP0_DAT4__IPU2_DISP0_DATA04,
 600         MX6_PAD_DISP0_DAT5__IPU2_DISP0_DATA05,
 601         MX6_PAD_DISP0_DAT6__IPU2_DISP0_DATA06,
 602         MX6_PAD_DISP0_DAT7__IPU2_DISP0_DATA07,
 603         MX6_PAD_DISP0_DAT8__IPU2_DISP0_DATA08,
 604         MX6_PAD_DISP0_DAT9__IPU2_DISP0_DATA09,
 605         MX6_PAD_DISP0_DAT10__IPU2_DISP0_DATA10,
 606         MX6_PAD_DISP0_DAT11__IPU2_DISP0_DATA11,
 607         MX6_PAD_DISP0_DAT12__IPU2_DISP0_DATA12,
 608         MX6_PAD_DISP0_DAT13__IPU2_DISP0_DATA13,
 609         MX6_PAD_DISP0_DAT14__IPU2_DISP0_DATA14,
 610         MX6_PAD_DISP0_DAT15__IPU2_DISP0_DATA15,
 611 #endif
 612 };
 613
 614 static void do_enable_hdmi(struct display_info_t const *dev)
 615 {
 616         imx_enable_hdmi_phy();
 617 }
 618
 619 static int detect_i2c(struct display_info_t const *dev)
 620 {
 621         return (0 == i2c_set_bus_num(dev->bus)) &&
 622                (0 == i2c_probe(dev->addr));
 623 }
 624
 625 static void enable_lvds(struct display_info_t const *dev)
 626 {
 627         struct iomuxc *iomux = (struct iomuxc *)
 628                                 IOMUXC_BASE_ADDR;
 629         u32 reg = readl(&iomux->gpr[2]);
 630         reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
 631         writel(reg, &iomux->gpr[2]);
 632         gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 633         gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
 634         gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
 635 }
 636
 637 static void enable_rgb(struct display_info_t const *dev)
 638 {
 639         imx_iomux_v3_setup_multiple_pads(
 640                 rgb_pads,
 641                 ARRAY_SIZE(rgb_pads));
 642         gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 643         gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
 644         gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
 645 }
 646
 647 static int detect_default(struct display_info_t const *dev)
 648 {
 649         (void) dev;
 650         return 1;
 651 }
 652
 653 struct display_info_t const displays[] = {{
 654         .bus    = -1,
 655         .addr   = 0,
 656         .pixfmt = IPU_PIX_FMT_RGB24,
 657         .detect = detect_hdmi,
 658         .enable = do_enable_hdmi,
 659         .mode   = {
 660                 .name           = "HDMI",
 661                 .refresh        = 60,
 662                 .xres           = 1024,
 663                 .yres           = 768,
 664                 .pixclock       = 15385,
 665                 .left_margin    = 220,
 666                 .right_margin   = 40,
 667                 .upper_margin   = 21,
 668                 .lower_margin   = 7,
 669                 .hsync_len      = 60,
 670                 .vsync_len      = 10,
 671                 .sync           = FB_SYNC_EXT,
 672                 .vmode          = FB_VMODE_NONINTERLACED
 673 } }, {
 674         .bus    = -1,
 675         .addr   = 0,
 676         .di     = 1,
 677         .pixfmt = IPU_PIX_FMT_RGB24,
 678         .detect = detect_default,
 679         .enable = enable_rgb,
 680         .mode   = {
 681                 .name           = "vga-rgb",
 682                 .refresh        = 60,
 683                 .xres           = 640,
 684                 .yres           = 480,
 685                 .pixclock       = 33000,
 686                 .left_margin    = 48,
 687                 .right_margin   = 16,
 688                 .upper_margin   = 31,
 689                 .lower_margin   = 11,
 690                 .hsync_len      = 96,
 691                 .vsync_len      = 2,
 692                 .sync           = 0,
 693                 .vmode          = FB_VMODE_NONINTERLACED
 694 } }, {
 695         .bus    = -1,
 696         .addr   = 0,
 697         .di     = 1,
 698         .pixfmt = IPU_PIX_FMT_RGB24,
 699         .enable = enable_rgb,
 700         .mode   = {
 701                 .name           = "wvga-rgb",
 702                 .refresh        = 60,
 703                 .xres           = 800,
 704                 .yres           = 480,
 705                 .pixclock       = 25000,
 706                 .left_margin    = 40,
 707                 .right_margin   = 88,
 708                 .upper_margin   = 33,
 709                 .lower_margin   = 10,
 710                 .hsync_len      = 128,
 711                 .vsync_len      = 2,
 712                 .sync           = 0,
 713                 .vmode          = FB_VMODE_NONINTERLACED
 714 } }, {
 715         .bus    = -1,
 716         .addr   = 0,
 717         .pixfmt = IPU_PIX_FMT_LVDS666,
 718         .detect = detect_i2c,
 719         .enable = enable_lvds,
 720         .mode   = {
 721                 .name           = "wsvga-lvds",
 722                 .refresh        = 60,
 723                 .xres           = 1024,
 724                 .yres           = 600,
 725                 .pixclock       = 15385,
 726                 .left_margin    = 220,
 727                 .right_margin   = 40,
 728                 .upper_margin   = 21,
 729                 .lower_margin   = 7,
 730                 .hsync_len      = 60,
 731                 .vsync_len      = 10,
 732                 .sync           = FB_SYNC_EXT,
 733                 .vmode          = FB_VMODE_NONINTERLACED
 734 } } };
 735 size_t display_count = ARRAY_SIZE(displays);
 736
 737 static void setup_display(void)
 738 {
 739         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 740         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 741         int reg;
 742
 743         enable_ipu_clock();
 744         imx_setup_hdmi();
 745         /* Turn on LDB0,IPU,IPU DI0 clocks */
 746         reg = __raw_readl(&mxc_ccm->CCGR3);
 747         reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
 748         writel(reg, &mxc_ccm->CCGR3);
 749
 750         /* set LDB0, LDB1 clk select to 011/011 */
 751         reg = readl(&mxc_ccm->cs2cdr);
 752         reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 753                  |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 754         reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
 755               |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
 756         writel(reg, &mxc_ccm->cs2cdr);
 757
 758         reg = readl(&mxc_ccm->cscmr2);
 759         reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
 760         writel(reg, &mxc_ccm->cscmr2);
 761
 762         reg = readl(&mxc_ccm->chsccdr);
 763         reg |= (CHSCCDR_CLK_SEL_LDB_DI0
 764                 <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
 765         writel(reg, &mxc_ccm->chsccdr);
 766
 767         reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 768              |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
 769              |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
 770              |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
 771              |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
 772              |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 773              |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
 774              |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 775              |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 776         writel(reg, &iomux->gpr[2]);
 777
 778         reg = readl(&iomux->gpr[3]);
 779         reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
 780                         |IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
 781             | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 782                <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 783         writel(reg, &iomux->gpr[3]);
 784
 785         /* backlight unconditionally on for now */
 786         imx_iomux_v3_setup_multiple_pads(backlight_pads,
 787                                          ARRAY_SIZE(backlight_pads));
 788         /* use 0 for EDT 7", use 1 for LG fullHD panel */
 789         gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
 790         gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
 791         gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 792 }
 793 #endif /* defined(CONFIG_VIDEO_IPUV3) */
 794
 795 int board_early_init_f(void)
 796 {
 797         imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
 798                                          ARRAY_SIZE(pwr_intb_pads));
 799 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 800         setup_iomux_dte_uart();
 801 #else
 802         setup_iomux_dce_uart();
 803 #endif
 804
 805 #if defined(CONFIG_VIDEO_IPUV3)
 806         setup_display();
 807 #endif
 808         return 0;
 809 }
 810
 811 /*
 812  * Do not overwrite the console
 813  * Use always serial for U-Boot console
 814  */
 815 int overwrite_console(void)
 816 {
 817         return 1;
 818 }
 819
 820 int board_init(void)
 821 {
 822         /* address of boot parameters */
 823         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 824
 825         setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 826         setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
 827         setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
 828
 829 #ifdef CONFIG_TDX_CMD_IMX_MFGR
 830         (void) pmic_init();
 831 #endif
 832
 833 #ifdef CONFIG_CMD_SATA
 834         setup_sata();
 835 #endif
 836
 837         setup_iomux_gpio();
 838
 839         return 0;
 840 }
 841
 842 #ifdef CONFIG_BOARD_LATE_INIT
 843 int board_late_init(void)
 844 {
 845 #if defined(CONFIG_REVISION_TAG) && \
 846     defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
 847         char env_str[256];
 848         u32 rev;
 849
 850         rev = get_board_rev();
 851         snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
 852         setenv("board_rev", env_str);
 853
 854 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 855         if ((rev & 0xfff0) == 0x0100) {
 856                 char *fdt_env;
 857
 858                 /* reconfigure the UART to DCE mode dynamically if on V1.0 HW */
 859                 setup_iomux_dce_uart();
 860
 861                 /* if using the default device tree, use version for V1.0 HW */
 862                 fdt_env = getenv("fdt_file");
 863                 if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
 864                         setenv("fdt_file", FDT_FILE_V1_0);
 865                         printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
 866 #ifndef CONFIG_ENV_IS_NOWHERE
 867                         saveenv();
 868 #endif
 869                 }
 870         }
 871 #endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */
 872 #endif /* CONFIG_REVISION_TAG */
 873
 874         return 0;
 875 }
 876 #endif /* CONFIG_BOARD_LATE_INIT */
 877
 878 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP)
 879 int ft_system_setup(void *blob, bd_t *bd)
 880 {
 881         return 0;
 882 }
 883 #endif
 884
 885 int checkboard(void)
 886 {
 887         char it[] = " IT";
 888         int minc, maxc;
 889
 890         switch (get_cpu_temp_grade(&minc, &maxc)) {
 891         case TEMP_AUTOMOTIVE:
 892         case TEMP_INDUSTRIAL:
 893                 break;
 894         case TEMP_EXTCOMMERCIAL:
 895         default:
 896                 it[0] = 0;
 897         };
 898         printf("Model: Toradex Apalis iMX6 %s %s%s\n",
 899                is_cpu_type(MXC_CPU_MX6D) ? "Dual" : "Quad",
 900                (gd->ram_size == 0x80000000) ? "2GB" :
 901                (gd->ram_size == 0x40000000) ? "1GB" : "512MB", it);
 902         return 0;
 903 }
 904
 905 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 906 int ft_board_setup(void *blob, bd_t *bd)
 907 {
 908         return ft_common_board_setup(blob, bd);
 909 }
 910 #endif
 911
 912 #ifdef CONFIG_CMD_BMODE
 913 static const struct boot_mode board_boot_modes[] = {
 914         /* 4-bit bus width */
 915         {"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
 916         {"sd",  MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
 917         {NULL,  0},
 918 };
 919 #endif
 920
 921 int misc_init_r(void)
 922 {
 923 #ifdef CONFIG_CMD_BMODE
 924         add_board_boot_modes(board_boot_modes);
 925 #endif
 926         return 0;
 927 }
 928
 929 #ifdef CONFIG_LDO_BYPASS_CHECK
 930 /* TODO, use external pmic, for now always ldo_enable */
 931 void ldo_mode_set(int ldo_bypass)
 932 {
 933         return;
 934 }
 935 #endif
 936
 937 #ifdef CONFIG_SPL_BUILD
 938 #include <spl.h>
 939 #include <libfdt.h>
 940 #include "asm/arch/mx6q-ddr.h"
 941 #include "asm/arch/iomux.h"
 942 #include "asm/arch/crm_regs.h"
 943
 944 static int mx6_com_dcd_table[] = {
 945 /* ddr-setup.cfg */
 946 MX6_IOM_DRAM_SDQS0, 0x00000030,
 947 MX6_IOM_DRAM_SDQS1, 0x00000030,
 948 MX6_IOM_DRAM_SDQS2, 0x00000030,
 949 MX6_IOM_DRAM_SDQS3, 0x00000030,
 950 MX6_IOM_DRAM_SDQS4, 0x00000030,
 951 MX6_IOM_DRAM_SDQS5, 0x00000030,
 952 MX6_IOM_DRAM_SDQS6, 0x00000030,
 953 MX6_IOM_DRAM_SDQS7, 0x00000030,
 954
 955 MX6_IOM_GRP_B0DS, 0x00000030,
 956 MX6_IOM_GRP_B1DS, 0x00000030,
 957 MX6_IOM_GRP_B2DS, 0x00000030,
 958 MX6_IOM_GRP_B3DS, 0x00000030,
 959 MX6_IOM_GRP_B4DS, 0x00000030,
 960 MX6_IOM_GRP_B5DS, 0x00000030,
 961 MX6_IOM_GRP_B6DS, 0x00000030,
 962 MX6_IOM_GRP_B7DS, 0x00000030,
 963 MX6_IOM_GRP_ADDDS, 0x00000030,
 964 /* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
 965 MX6_IOM_GRP_CTLDS, 0x00000030,
 966
 967 MX6_IOM_DRAM_DQM0, 0x00020030,
 968 MX6_IOM_DRAM_DQM1, 0x00020030,
 969 MX6_IOM_DRAM_DQM2, 0x00020030,
 970 MX6_IOM_DRAM_DQM3, 0x00020030,
 971 MX6_IOM_DRAM_DQM4, 0x00020030,
 972 MX6_IOM_DRAM_DQM5, 0x00020030,
 973 MX6_IOM_DRAM_DQM6, 0x00020030,
 974 MX6_IOM_DRAM_DQM7, 0x00020030,
 975
 976 MX6_IOM_DRAM_CAS, 0x00020030,
 977 MX6_IOM_DRAM_RAS, 0x00020030,
 978 MX6_IOM_DRAM_SDCLK_0, 0x00020030,
 979 MX6_IOM_DRAM_SDCLK_1, 0x00020030,
 980
 981 MX6_IOM_DRAM_RESET, 0x00020030,
 982 MX6_IOM_DRAM_SDCKE0, 0x00003000,
 983 MX6_IOM_DRAM_SDCKE1, 0x00003000,
 984
 985 MX6_IOM_DRAM_SDODT0, 0x00003030,
 986 MX6_IOM_DRAM_SDODT1, 0x00003030,
 987
 988 /* (differential input) */
 989 MX6_IOM_DDRMODE_CTL, 0x00020000,
 990 /* (differential input) */
 991 MX6_IOM_GRP_DDRMODE, 0x00020000,
 992 /* disable ddr pullups */
 993 MX6_IOM_GRP_DDRPKE, 0x00000000,
 994 MX6_IOM_DRAM_SDBA2, 0x00000000,
 995 /* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
 996 MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
 997
 998 /* Read data DQ Byte0-3 delay */
 999 MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
1000 MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
1001 MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
1002 MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
1003 MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
1004 MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
1005 MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
1006 MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
1007
1008 /*
1009  * MDMISC       mirroring       interleaved (row/bank/col)
1010  */
1011 MX6_MMDC_P0_MDMISC, 0x00081740,
1012
1013 /*
1014  * MDSCR        con_req
1015  */
1016 MX6_MMDC_P0_MDSCR, 0x00008000,
1017
1018 /* 1066mhz_4x128mx16.cfg */
1019
1020 MX6_MMDC_P0_MDPDC, 0x00020036,
1021 MX6_MMDC_P0_MDCFG0, 0x555A7954,
1022 MX6_MMDC_P0_MDCFG1, 0xDB328F64,
1023 MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
1024 MX6_MMDC_P0_MDRWD, 0x000026D2,
1025 MX6_MMDC_P0_MDOR, 0x005A1023,
1026 MX6_MMDC_P0_MDOTC, 0x09555050,
1027 MX6_MMDC_P0_MDPDC, 0x00025576,
1028 MX6_MMDC_P0_MDASP, 0x00000027,
1029 MX6_MMDC_P0_MDCTL, 0x831A0000,
1030 MX6_MMDC_P0_MDSCR, 0x04088032,
1031 MX6_MMDC_P0_MDSCR, 0x00008033,
1032 MX6_MMDC_P0_MDSCR, 0x00428031,
1033 MX6_MMDC_P0_MDSCR, 0x19308030,
1034 MX6_MMDC_P0_MDSCR, 0x04008040,
1035 MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
1036 MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
1037 MX6_MMDC_P0_MDREF, 0x00005800,
1038 MX6_MMDC_P0_MPODTCTRL, 0x00000000,
1039 MX6_MMDC_P1_MPODTCTRL, 0x00000000,
1040
1041 MX6_MMDC_P0_MPDGCTRL0, 0x432A0338,
1042 MX6_MMDC_P0_MPDGCTRL1, 0x03260324,
1043 MX6_MMDC_P1_MPDGCTRL0, 0x43340344,
1044 MX6_MMDC_P1_MPDGCTRL1, 0x031E027C,
1045
1046 MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E,
1047 MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37,
1048
1049 MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C,
1050 MX6_MMDC_P1_MPWRDLCTL, 0x4336453F,
1051
1052 MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E,
1053 MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B,
1054 MX6_MMDC_P1_MPWLDECTRL0, 0x00060015,
1055 MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E,
1056
1057 MX6_MMDC_P0_MPMUR0, 0x00000800,
1058 MX6_MMDC_P1_MPMUR0, 0x00000800,
1059 MX6_MMDC_P0_MDSCR, 0x00000000,
1060 MX6_MMDC_P0_MAPSR, 0x00011006,
1061 };
1062
1063 static int mx6_it_dcd_table[] = {
1064 /* ddr-setup.cfg */
1065 MX6_IOM_DRAM_SDQS0, 0x00000030,
1066 MX6_IOM_DRAM_SDQS1, 0x00000030,
1067 MX6_IOM_DRAM_SDQS2, 0x00000030,
1068 MX6_IOM_DRAM_SDQS3, 0x00000030,
1069 MX6_IOM_DRAM_SDQS4, 0x00000030,
1070 MX6_IOM_DRAM_SDQS5, 0x00000030,
1071 MX6_IOM_DRAM_SDQS6, 0x00000030,
1072 MX6_IOM_DRAM_SDQS7, 0x00000030,
1073
1074 MX6_IOM_GRP_B0DS, 0x00000030,
1075 MX6_IOM_GRP_B1DS, 0x00000030,
1076 MX6_IOM_GRP_B2DS, 0x00000030,
1077 MX6_IOM_GRP_B3DS, 0x00000030,
1078 MX6_IOM_GRP_B4DS, 0x00000030,
1079 MX6_IOM_GRP_B5DS, 0x00000030,
1080 MX6_IOM_GRP_B6DS, 0x00000030,
1081 MX6_IOM_GRP_B7DS, 0x00000030,
1082 MX6_IOM_GRP_ADDDS, 0x00000030,
1083 /* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
1084 MX6_IOM_GRP_CTLDS, 0x00000030,
1085
1086 MX6_IOM_DRAM_DQM0, 0x00020030,
1087 MX6_IOM_DRAM_DQM1, 0x00020030,
1088 MX6_IOM_DRAM_DQM2, 0x00020030,
1089 MX6_IOM_DRAM_DQM3, 0x00020030,
1090 MX6_IOM_DRAM_DQM4, 0x00020030,
1091 MX6_IOM_DRAM_DQM5, 0x00020030,
1092 MX6_IOM_DRAM_DQM6, 0x00020030,
1093 MX6_IOM_DRAM_DQM7, 0x00020030,
1094
1095 MX6_IOM_DRAM_CAS, 0x00020030,
1096 MX6_IOM_DRAM_RAS, 0x00020030,
1097 MX6_IOM_DRAM_SDCLK_0, 0x00020030,
1098 MX6_IOM_DRAM_SDCLK_1, 0x00020030,
1099
1100 MX6_IOM_DRAM_RESET, 0x00020030,
1101 MX6_IOM_DRAM_SDCKE0, 0x00003000,
1102 MX6_IOM_DRAM_SDCKE1, 0x00003000,
1103
1104 MX6_IOM_DRAM_SDODT0, 0x00003030,
1105 MX6_IOM_DRAM_SDODT1, 0x00003030,
1106
1107 /* (differential input) */
1108 MX6_IOM_DDRMODE_CTL, 0x00020000,
1109 /* (differential input) */
1110 MX6_IOM_GRP_DDRMODE, 0x00020000,
1111 /* disable ddr pullups */
1112 MX6_IOM_GRP_DDRPKE, 0x00000000,
1113 MX6_IOM_DRAM_SDBA2, 0x00000000,
1114 /* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
1115 MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
1116
1117 /* Read data DQ Byte0-3 delay */
1118 MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
1119 MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
1120 MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
1121 MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
1122 MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
1123 MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
1124 MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
1125 MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
1126
1127 /*
1128  * MDMISC       mirroring       interleaved (row/bank/col)
1129  */
1130 MX6_MMDC_P0_MDMISC, 0x00081740,
1131
1132 /*
1133  * MDSCR        con_req
1134  */
1135 MX6_MMDC_P0_MDSCR, 0x00008000,
1136
1137 /* 1066mhz_4x256mx16.cfg */
1138
1139 MX6_MMDC_P0_MDPDC, 0x00020036,
1140 MX6_MMDC_P0_MDCFG0, 0x898E78f5,
1141 MX6_MMDC_P0_MDCFG1, 0xff328f64,
1142 MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
1143 MX6_MMDC_P0_MDRWD, 0x000026D2,
1144 MX6_MMDC_P0_MDOR, 0x008E1023,
1145 MX6_MMDC_P0_MDOTC, 0x09444040,
1146 MX6_MMDC_P0_MDPDC, 0x00025576,
1147 MX6_MMDC_P0_MDASP, 0x00000047,
1148 MX6_MMDC_P0_MDCTL, 0x841A0000,
1149 MX6_MMDC_P0_MDSCR, 0x02888032,
1150 MX6_MMDC_P0_MDSCR, 0x00008033,
1151 MX6_MMDC_P0_MDSCR, 0x00048031,
1152 MX6_MMDC_P0_MDSCR, 0x19408030,
1153 MX6_MMDC_P0_MDSCR, 0x04008040,
1154 MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
1155 MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
1156 MX6_MMDC_P0_MDREF, 0x00007800,
1157 MX6_MMDC_P0_MPODTCTRL, 0x00022227,
1158 MX6_MMDC_P1_MPODTCTRL, 0x00022227,
1159
1160 MX6_MMDC_P0_MPDGCTRL0, 0x03300338,
1161 MX6_MMDC_P0_MPDGCTRL1, 0x03240324,
1162 MX6_MMDC_P1_MPDGCTRL0, 0x03440350,
1163 MX6_MMDC_P1_MPDGCTRL1, 0x032C0308,
1164
1165 MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E,
1166 MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46,
1167
1168 MX6_MMDC_P0_MPWRDLCTL, 0x403E463E,
1169 MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46,
1170
1171 MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E,
1172 MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B,
1173 MX6_MMDC_P1_MPWLDECTRL0, 0x00060015,
1174 MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E,
1175
1176 MX6_MMDC_P0_MPMUR0, 0x00000800,
1177 MX6_MMDC_P1_MPMUR0, 0x00000800,
1178 MX6_MMDC_P0_MDSCR, 0x00000000,
1179 MX6_MMDC_P0_MAPSR, 0x00011006,
1180 };
1181
1182
1183 static void ccgr_init(void)
1184 {
1185         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1186
1187         writel(0x00C03F3F, &ccm->CCGR0);
1188         writel(0x0030FC03, &ccm->CCGR1);
1189         writel(0x0FFFFFF3, &ccm->CCGR2);
1190         writel(0x3FF0300F, &ccm->CCGR3);
1191         writel(0x00FFF300, &ccm->CCGR4);
1192         writel(0x0F0000F3, &ccm->CCGR5);
1193         writel(0x000003FF, &ccm->CCGR6);
1194
1195 /*
1196  * Setup CCM_CCOSR register as follows:
1197  *
1198  * cko1_en  = 1    --> CKO1 enabled
1199  * cko1_div = 111  --> divide by 8
1200  * cko1_sel = 1011 --> ahb_clk_root
1201  *
1202  * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
1203  */
1204         writel(0x000000FB, &ccm->ccosr);
1205 }
1206
1207 static void gpr_init(void)
1208 {
1209         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
1210
1211         /* enable AXI cache for VDOA/VPU/IPU */
1212         writel(0xF00000CF, &iomux->gpr[4]);
1213         /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
1214         writel(0x007F007F, &iomux->gpr[6]);
1215         writel(0x007F007F, &iomux->gpr[7]);
1216 }
1217
1218 static void ddr_init(int *table, int size)
1219 {
1220         int i;
1221
1222         for (i = 0; i < size / 2 ; i++)
1223                 writel(table[2 * i + 1], table[2 * i]);
1224 }
1225
1226 static void spl_dram_init(void)
1227 {
1228         int minc, maxc;
1229
1230         switch (get_cpu_temp_grade(&minc, &maxc)) {
1231         case TEMP_COMMERCIAL:
1232         case TEMP_EXTCOMMERCIAL:
1233                 puts("Commercial temperature grade DDR3 timings.\n");
1234                 ddr_init(mx6_com_dcd_table, ARRAY_SIZE(mx6_com_dcd_table));
1235                 break;
1236         case TEMP_INDUSTRIAL:
1237         case TEMP_AUTOMOTIVE:
1238         default:
1239                 puts("Industrial temperature grade DDR3 timings.\n");
1240                 ddr_init(mx6_it_dcd_table, ARRAY_SIZE(mx6_it_dcd_table));
1241                 break;
1242         };
1243         udelay(100);
1244 }
1245
1246 void board_init_f(ulong dummy)
1247 {
1248         /* setup AIPS and disable watchdog */
1249         arch_cpu_init();
1250
1251         ccgr_init();
1252         gpr_init();
1253
1254         /* iomux and setup of i2c */
1255         board_early_init_f();
1256
1257         /* setup GP timer */
1258         timer_init();
1259
1260         /* UART clocks enabled and gd valid - init serial console */
1261         preloader_console_init();
1262
1263 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
1264         /* Make sure we use dte mode */
1265         setup_dtemode_uart();
1266 #endif
1267
1268         /* DDR initialization */
1269         spl_dram_init();
1270
1271         /* Clear the BSS. */
1272         memset(__bss_start, 0, __bss_end - __bss_start);
1273
1274         /* load/boot image from boot device */
1275         board_init_r(NULL, 0);
1276 }
1277
1278 void reset_cpu(ulong addr)
1279 {
1280 }
1281
1282 #endif
1283
1284 static struct mxc_serial_platdata mxc_serial_plat = {
1285         .reg = (struct mxc_uart *)UART1_BASE,
1286         .use_dte = true,
1287 };
1288
1289 U_BOOT_DEVICE(mxc_serial) = {
1290         .name = "serial_mxc",
1291         .platdata = &mxc_serial_plat,
1292 };