board/seco/common/mx6.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   4  * Copyright (C) 2015 ECA Sinters
   5  *
   6  * Author: Fabio Estevam <fabio.estevam@freescale.com>
   7  * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com>
   8  */
   9
  10 #include <asm/arch/clock.h>
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/arch/iomux.h>
  13 #include <asm/arch/mx6-pins.h>
  14 #include <linux/errno.h>
  15 #include <asm/gpio.h>
  16 #include <asm/mach-imx/iomux-v3.h>
  17 #include <asm/mach-imx/boot_mode.h>
  18 #include <mmc.h>
  19 #include <fsl_esdhc_imx.h>
  20 #include <miiphy.h>
  21 #include <netdev.h>
  22 #include <asm/arch/mxc_hdmi.h>
  23 #include <asm/arch/crm_regs.h>
  24 #include <linux/fb.h>
  25 #include <ipu_pixfmt.h>
  26 #include <asm/io.h>
  27 #include <asm/arch/sys_proto.h>
  28 #include <micrel.h>
  29 #include <asm/mach-imx/mxc_i2c.h>
  30 #include <i2c.h>
  31
  32 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  33         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  34         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  35
  36 static iomux_v3_cfg_t const uart2_pads[] = {
  37         MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  38         MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  39 };
  40
  41 void seco_mx6_setup_uart_iomux(void)
  42 {
  43         imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
  44 }
  45
  46 #define ENET_PAD_CTRL   (PAD_CTL_PUS_47K_UP |   \
  47                          PAD_CTL_SPEED_MED |    \
  48                          PAD_CTL_DSE_40ohm |    \
  49                          PAD_CTL_HYS)
  50
  51 static iomux_v3_cfg_t const enet_pads[] = {
  52         MX6_PAD_ENET_MDIO__ENET_MDIO            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  53         MX6_PAD_ENET_MDC__ENET_MDC              | MUX_PAD_CTRL(ENET_PAD_CTRL),
  54         MX6_PAD_RGMII_TXC__RGMII_TXC            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  55         MX6_PAD_RGMII_TD0__RGMII_TD0            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  56         MX6_PAD_RGMII_TD1__RGMII_TD1            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  57         MX6_PAD_RGMII_TD2__RGMII_TD2            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  58         MX6_PAD_RGMII_TD3__RGMII_TD3            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  59         MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
  60         MX6_PAD_ENET_REF_CLK__ENET_TX_CLK       | MUX_PAD_CTRL(ENET_PAD_CTRL),
  61         MX6_PAD_RGMII_RXC__RGMII_RXC            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  62         MX6_PAD_RGMII_RD0__RGMII_RD0            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  63         MX6_PAD_RGMII_RD1__RGMII_RD1            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  64         MX6_PAD_RGMII_RD2__RGMII_RD2            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  65         MX6_PAD_RGMII_RD3__RGMII_RD3            | MUX_PAD_CTRL(ENET_PAD_CTRL),
  66         MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
  67 };
  68
  69 void seco_mx6_setup_enet_iomux(void)
  70 {
  71         imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
  72 }
  73
  74 int seco_mx6_rgmii_rework(struct phy_device *phydev)
  75 {
  76         /* control data pad skew - devaddr = 0x02, register = 0x04 */
  77         ksz9031_phy_extended_write(phydev, 0x02,
  78                                    MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
  79                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
  80         /* rx data pad skew - devaddr = 0x02, register = 0x05 */
  81         ksz9031_phy_extended_write(phydev, 0x02,
  82                                    MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
  83                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
  84         /* tx data pad skew - devaddr = 0x02, register = 0x05 */
  85         ksz9031_phy_extended_write(phydev, 0x02,
  86                                    MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
  87                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
  88
  89         /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
  90         ksz9031_phy_extended_write(phydev, 0x02,
  91                                    MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
  92                                    MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
  93         return 0;
  94 }
  95
  96 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |    \
  97                         PAD_CTL_SPEED_LOW |     \
  98                         PAD_CTL_DSE_80ohm |     \
  99                         PAD_CTL_SRE_FAST  |     \
 100                         PAD_CTL_HYS)
 101
 102 static iomux_v3_cfg_t const usdhc3_pads[] = {
 103         MX6_PAD_SD3_CLK__SD3_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 104         MX6_PAD_SD3_CMD__SD3_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 105         MX6_PAD_SD3_DAT0__SD3_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 106         MX6_PAD_SD3_DAT1__SD3_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 107         MX6_PAD_SD3_DAT2__SD3_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 108         MX6_PAD_SD3_DAT3__SD3_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 109 };
 110
 111 static iomux_v3_cfg_t const usdhc4_pads[] = {
 112         MX6_PAD_SD4_CLK__SD4_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 113         MX6_PAD_SD4_CMD__SD4_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 114         MX6_PAD_SD4_DAT0__SD4_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 115         MX6_PAD_SD4_DAT1__SD4_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 116         MX6_PAD_SD4_DAT2__SD4_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 117         MX6_PAD_SD4_DAT3__SD4_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 118 };
 119
 120 void seco_mx6_setup_usdhc_iomux(int id)
 121 {
 122         switch (id) {
 123         case 3:
 124                 imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
 125                                                  ARRAY_SIZE(usdhc3_pads));
 126                 break;
 127
 128         case 4:
 129                 imx_iomux_v3_setup_multiple_pads(usdhc4_pads,
 130                                                  ARRAY_SIZE(usdhc4_pads));
 131                 break;
 132
 133         default:
 134                 printf("Warning: invalid usdhc id (%d)\n", id);
 135                 break;
 136         }
 137 }