2 * Copyright (C) 2015 Samsung Electronics
3 * Przemyslaw Marczak <p.marczak@samsung.com>
5 * SPDX-License-Identifier: GPL-2.0+
13 #include <power/pmic.h>
14 #include <power/regulator.h>
15 #include <power/s2mps11.h>
16 #include <samsung/exynos5-dt-types.h>
17 #include <samsung/misc.h>
19 DECLARE_GLOBAL_DATA_PTR;
21 static const struct udevice_id board_ids[] = {
22 { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 },
23 { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC },
28 * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf):
31 * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
34 * 0.5 1016 XU4+Air0.1 (Passive cooling)
35 * 0.6 1308 XU4S 0.1 (HC1)
36 * Use +1% for ADC value tolerance in the array below, the code loops until
37 * the measured ADC value is lower than then ADCmax from the array.
39 struct odroid_rev_info odroid_info[] = {
40 { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
41 { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" },
42 { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" },
43 { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" },
44 { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
47 static unsigned int odroid_get_rev(void)
51 for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
52 if (odroid_info[i].board_type == gd->board_type)
53 return odroid_info[i].board_rev;
59 static int odroid_get_board_type(void)
64 ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval);
68 for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
69 /* ADC tolerance: +1% */
70 if (adcval < odroid_info[i].adc_val)
71 return odroid_info[i].board_type;
75 return EXYNOS5_BOARD_ODROID_XU3;
79 * odroid_get_type_str - returns pointer to one of the board type string.
80 * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be
81 * detected only when the i2c controller is ready to use. Fortunately,
82 * XU3 and XU3L are compatible, and the information about board lite
83 * revision is needed before booting the linux, to set proper environment
86 static const char *odroid_get_type_str(void)
88 const char *type_xu3l = "xu3-lite";
89 struct udevice *dev, *chip;
92 if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02)
95 ret = pmic_get("s2mps11", &dev);
99 /* Enable LDO26: 3.0V */
100 ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
101 S2MPS11_LDO26_ENABLE);
105 /* Check XU3Lite by probe INA231 I2C0:0x40 */
106 ret = uclass_get_device(UCLASS_I2C, 0, &dev);
110 ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
115 for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
116 if (odroid_info[i].board_type == gd->board_type)
117 return odroid_info[i].name;
123 bool board_is_odroidxu3(void)
125 if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 &&
126 gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02)
132 bool board_is_odroidxu4(void)
134 if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01)
140 bool board_is_odroidhc1(void)
142 if (gd->board_type == EXYNOS5_BOARD_ODROID_HC1_REV01)
148 bool board_is_generic(void)
150 if (gd->board_type == EXYNOS5_BOARD_GENERIC)
157 * get_board_rev() - return detected board revision.
159 * @return: return board revision number for XU3 or 0 for generic
161 u32 get_board_rev(void)
163 if (board_is_generic())
166 return odroid_get_rev();
170 * get_board_type() - returns board type string.
172 * @return: return board type string for XU3 or empty string for generic
174 const char *get_board_type(void)
176 const char *generic = "";
178 if (board_is_generic())
181 return odroid_get_type_str();
185 * set_board_type() - set board type in gd->board_type.
186 * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
187 * then set its proper type.
189 void set_board_type(void)
191 const struct udevice_id *of_match = board_ids;
194 gd->board_type = EXYNOS5_BOARD_GENERIC;
196 while (of_match->compatible) {
197 ret = fdt_node_check_compatible(gd->fdt_blob, 0,
198 of_match->compatible);
202 gd->board_type = of_match->data;
206 /* If Odroid, then check its revision */
207 if (board_is_odroidxu3())
208 gd->board_type = odroid_get_board_type();