t210: pinmux: Remove pinmux/GPIO init from T210 boards
[oweals/u-boot.git] / board / nvidia / p2371-0000 / p2371-0000.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2013-2019
4  * NVIDIA Corporation <www.nvidia.com>
5  */
6
7 #include <common.h>
8 #include <i2c.h>
9 #include <asm/arch/gpio.h>
10 #include <asm/arch/pinmux.h>
11 #include "../p2571/max77620_init.h"
12
13 void pin_mux_mmc(void)
14 {
15         struct udevice *dev;
16         uchar val;
17         int ret;
18
19         /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
20         debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
21         ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
22         if (ret) {
23                 printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
24                 return;
25         }
26         /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
27         val = 0xF2;
28         ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
29         if (ret)
30                 printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
31 }