board/logicpd/imx6/imx6logic.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2017 Logic PD, Inc.
   4  *
   5  * Author: Adam Ford <aford173@gmail.com>
   6  *
   7  * Based on SabreSD by Fabio Estevam <fabio.estevam@nxp.com>
   8  * and updates by Jagan Teki <jagan@amarulasolutions.com>
   9  */
  10
  11 #include <common.h>
  12 #include <miiphy.h>
  13 #include <input.h>
  14 #include <mmc.h>
  15 #include <fsl_esdhc_imx.h>
  16 #include <asm/io.h>
  17 #include <asm/gpio.h>
  18 #include <linux/sizes.h>
  19 #include <asm/arch/clock.h>
  20 #include <asm/arch/crm_regs.h>
  21 #include <asm/arch/iomux.h>
  22 #include <asm/arch/mxc_hdmi.h>
  23 #include <asm/arch/mx6-pins.h>
  24 #include <asm/arch/sys_proto.h>
  25 #include <asm/mach-imx/boot_mode.h>
  26 #include <asm/mach-imx/iomux-v3.h>
  27
  28 DECLARE_GLOBAL_DATA_PTR;
  29
  30 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
  31         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
  32         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  33
  34 #define NAND_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
  35         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |             \
  36         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  37
  38 int dram_init(void)
  39 {
  40         gd->ram_size = imx_ddr_size();
  41         return 0;
  42 }
  43
  44 static iomux_v3_cfg_t const uart1_pads[] = {
  45         MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  46         MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  47 };
  48
  49 static iomux_v3_cfg_t const uart2_pads[] = {
  50         MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  51         MX6_PAD_SD4_DAT5__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
  52         MX6_PAD_SD4_DAT6__UART2_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
  53         MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  54 };
  55
  56 static iomux_v3_cfg_t const uart3_pads[] = {
  57         MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
  58         MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  59         MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  60         MX6_PAD_EIM_EB3__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
  61 };
  62
  63 static void setup_iomux_uart(void)
  64 {
  65         imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
  66         imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
  67         imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
  68 }
  69
  70 static iomux_v3_cfg_t const nand_pads[] = {
  71         MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
  72         MX6_PAD_NANDF_ALE__NAND_ALE  | MUX_PAD_CTRL(NAND_PAD_CTRL),
  73         MX6_PAD_NANDF_CLE__NAND_CLE  | MUX_PAD_CTRL(NAND_PAD_CTRL),
  74         MX6_PAD_NANDF_WP_B__NAND_WP_B  | MUX_PAD_CTRL(NAND_PAD_CTRL),
  75         MX6_PAD_NANDF_RB0__NAND_READY_B   | MUX_PAD_CTRL(NAND_PAD_CTRL),
  76         MX6_PAD_NANDF_D0__NAND_DATA00    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  77         MX6_PAD_NANDF_D1__NAND_DATA01    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  78         MX6_PAD_NANDF_D2__NAND_DATA02    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  79         MX6_PAD_NANDF_D3__NAND_DATA03    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  80         MX6_PAD_NANDF_D4__NAND_DATA04    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  81         MX6_PAD_NANDF_D5__NAND_DATA05    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  82         MX6_PAD_NANDF_D6__NAND_DATA06    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  83         MX6_PAD_NANDF_D7__NAND_DATA07    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  84         MX6_PAD_SD4_CLK__NAND_WE_B    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  85         MX6_PAD_SD4_CMD__NAND_RE_B    | MUX_PAD_CTRL(NAND_PAD_CTRL),
  86 };
  87
  88 static void setup_nand_pins(void)
  89 {
  90         imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
  91 }
  92
  93 static int ar8031_phy_fixup(struct phy_device *phydev)
  94 {
  95         unsigned short val;
  96
  97         /* To enable AR8031 output a 125MHz clk from CLK_25M */
  98         phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
  99         phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
 100         phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
 101
 102         val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
 103         val &= 0xffe3;
 104         val |= 0x18;
 105         phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
 106
 107         /* introduce tx clock delay */
 108         phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
 109         val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
 110         val |= 0x0100;
 111         phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
 112
 113         return 0;
 114 }
 115
 116 int board_phy_config(struct phy_device *phydev)
 117 {
 118         ar8031_phy_fixup(phydev);
 119
 120         if (phydev->drv->config)
 121                 phydev->drv->config(phydev);
 122
 123         return 0;
 124 }
 125
 126 /*
 127  * Do not overwrite the console
 128  * Use always serial for U-Boot console
 129  */
 130 int overwrite_console(void)
 131 {
 132         return 1;
 133 }
 134
 135 int board_early_init_f(void)
 136 {
 137         setup_iomux_uart();
 138         setup_nand_pins();
 139         return 0;
 140 }
 141
 142 int board_init(void)
 143 {
 144         /* address of boot parameters */
 145         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 146         return 0;
 147 }
 148
 149 int board_late_init(void)
 150 {
 151         env_set("board_name", "imx6logic");
 152
 153         if (is_mx6dq()) {
 154                 env_set("board_rev", "MX6DQ");
 155                 if (!env_get("fdt_file"))
 156                         env_set("fdt_file", "imx6q-logicpd.dtb");
 157         }
 158
 159         return 0;
 160 }
 161
 162 #ifdef CONFIG_SPL_BUILD
 163 #include <asm/arch/mx6-ddr.h>
 164 #include <asm/arch/mx6q-ddr.h>
 165 #include <spl.h>
 166 #include <linux/libfdt.h>
 167
 168 #ifdef CONFIG_SPL_OS_BOOT
 169 int spl_start_uboot(void)
 170 {
 171         /* break into full u-boot on 'c' */
 172         if (serial_tstc() && serial_getc() == 'c')
 173                 return 1;
 174
 175         return 0;
 176 }
 177 #endif
 178
 179 /* SD interface */
 180 #define USDHC_PAD_CTRL                                                  \
 181         (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |   \
 182          PAD_CTL_SRE_FAST | PAD_CTL_HYS)
 183
 184 static iomux_v3_cfg_t const usdhc1_pads[] = {
 185         MX6_PAD_SD1_CLK__SD1_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 186         MX6_PAD_SD1_CMD__SD1_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 187         MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 188         MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 189         MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 190         MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 191 };
 192
 193 static iomux_v3_cfg_t const usdhc2_pads[] = {
 194         MX6_PAD_SD2_DAT0__SD2_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 195         MX6_PAD_SD2_DAT1__SD2_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 196         MX6_PAD_SD2_DAT2__SD2_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 197         MX6_PAD_SD2_DAT3__SD2_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 198         MX6_PAD_SD2_CLK__SD2_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 199         MX6_PAD_SD2_CMD__SD2_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 200         MX6_PAD_GPIO_4__GPIO1_IO04      | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 201 };
 202
 203 #ifdef CONFIG_FSL_ESDHC_IMX
 204 struct fsl_esdhc_cfg usdhc_cfg[] = {
 205         {USDHC1_BASE_ADDR}, /* SOM */
 206         {USDHC2_BASE_ADDR}  /* Baseboard */
 207 };
 208
 209 int board_mmc_init(bd_t *bis)
 210 {
 211         struct src *psrc = (struct src *)SRC_BASE_ADDR;
 212         unsigned int reg = readl(&psrc->sbmr1) >> 11;
 213         /*
 214          * Upon reading BOOT_CFG register the following map is done:
 215          * Bit 11 and 12 of BOOT_CFG register can determine the current
 216          * mmc port
 217          * 0x1                  SD1-SOM
 218          * 0x2                  SD2-Baseboard
 219          */
 220
 221         reg &= 0x3; /* Only care about bottom 2 bits */
 222
 223         switch (reg) {
 224         case 0:
 225                 SETUP_IOMUX_PADS(usdhc1_pads);
 226                 break;
 227         case 1:
 228                 SETUP_IOMUX_PADS(usdhc2_pads);
 229                 break;
 230         }
 231
 232         return 0;
 233 }
 234
 235 #endif
 236
 237 static void ccgr_init(void)
 238 {
 239         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 240
 241         writel(0x00C03F3F, &ccm->CCGR0);
 242         writel(0x0030FC03, &ccm->CCGR1);
 243         writel(0x0FFFC000, &ccm->CCGR2);
 244         writel(0x3FF00000, &ccm->CCGR3);
 245         writel(0xFFFFF300, &ccm->CCGR4);
 246         writel(0x0F0000F3, &ccm->CCGR5);
 247         writel(0x00000FFF, &ccm->CCGR6);
 248 }
 249
 250 static int mx6q_dcd_table[] = {
 251         MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
 252         MX6_IOM_GRP_DDRPKE, 0x00000000,
 253         MX6_IOM_DRAM_SDCLK_0, 0x00000030,
 254         MX6_IOM_DRAM_SDCLK_1, 0x00000030,
 255         MX6_IOM_DRAM_CAS, 0x00000030,
 256         MX6_IOM_DRAM_RAS, 0x00000030,
 257         MX6_IOM_GRP_ADDDS, 0x00000030,
 258         MX6_IOM_DRAM_RESET, 0x00000030,
 259         MX6_IOM_DRAM_SDBA2, 0x00000000,
 260         MX6_IOM_DRAM_SDODT0, 0x00000030,
 261         MX6_IOM_DRAM_SDODT1, 0x00000030,
 262         MX6_IOM_GRP_CTLDS, 0x00000030,
 263         MX6_IOM_DDRMODE_CTL, 0x00020000,
 264         MX6_IOM_DRAM_SDQS0, 0x00000030,
 265         MX6_IOM_DRAM_SDQS1, 0x00000030,
 266         MX6_IOM_DRAM_SDQS2, 0x00000030,
 267         MX6_IOM_DRAM_SDQS3, 0x00000030,
 268         MX6_IOM_GRP_DDRMODE, 0x00020000,
 269         MX6_IOM_GRP_B0DS, 0x00000030,
 270         MX6_IOM_GRP_B1DS, 0x00000030,
 271         MX6_IOM_GRP_B2DS, 0x00000030,
 272         MX6_IOM_GRP_B3DS, 0x00000030,
 273         MX6_IOM_DRAM_DQM0, 0x00000030,
 274         MX6_IOM_DRAM_DQM1, 0x00000030,
 275         MX6_IOM_DRAM_DQM2, 0x00000030,
 276         MX6_IOM_DRAM_DQM3, 0x00000030,
 277         MX6_MMDC_P0_MDSCR, 0x00008000,
 278         MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
 279         MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A,
 280         MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B,
 281         MX6_MMDC_P0_MPDGCTRL0, 0x03340338,
 282         MX6_MMDC_P0_MPDGCTRL1, 0x0334032C,
 283         MX6_MMDC_P0_MPRDDLCTL, 0x4036383C,
 284         MX6_MMDC_P0_MPWRDLCTL, 0x2E384038,
 285         MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
 286         MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
 287         MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
 288         MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
 289         MX6_MMDC_P0_MPMUR0, 0x00000800,
 290         MX6_MMDC_P0_MDPDC, 0x00020036,
 291         MX6_MMDC_P0_MDOTC, 0x09444040,
 292         MX6_MMDC_P0_MDCFG0, 0xB8BE7955,
 293         MX6_MMDC_P0_MDCFG1, 0xFF328F64,
 294         MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
 295         MX6_MMDC_P0_MDMISC, 0x00011740,
 296         MX6_MMDC_P0_MDSCR, 0x00008000,
 297         MX6_MMDC_P0_MDRWD, 0x000026D2,
 298         MX6_MMDC_P0_MDOR, 0x00BE1023,
 299         MX6_MMDC_P0_MDASP, 0x00000047,
 300         MX6_MMDC_P0_MDCTL, 0x85190000,
 301         MX6_MMDC_P0_MDSCR, 0x00888032,
 302         MX6_MMDC_P0_MDSCR, 0x00008033,
 303         MX6_MMDC_P0_MDSCR, 0x00008031,
 304         MX6_MMDC_P0_MDSCR, 0x19408030,
 305         MX6_MMDC_P0_MDSCR, 0x04008040,
 306         MX6_MMDC_P0_MDREF, 0x00007800,
 307         MX6_MMDC_P0_MPODTCTRL, 0x00000007,
 308         MX6_MMDC_P0_MDPDC, 0x00025576,
 309         MX6_MMDC_P0_MAPSR, 0x00011006,
 310         MX6_MMDC_P0_MDSCR, 0x00000000,
 311         /* enable AXI cache for VDOA/VPU/IPU */
 312
 313         MX6_IOMUXC_GPR4, 0xF00000CF,
 314         /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
 315         MX6_IOMUXC_GPR6, 0x007F007F,
 316         MX6_IOMUXC_GPR7, 0x007F007F,
 317 };
 318
 319 static void ddr_init(int *table, int size)
 320 {
 321         int i;
 322
 323         for (i = 0; i < size / 2 ; i++)
 324                 writel(table[2 * i + 1], table[2 * i]);
 325 }
 326
 327 static void spl_dram_init(void)
 328 {
 329         if (is_mx6dq())
 330                 ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
 331 }
 332
 333 void board_init_f(ulong dummy)
 334 {
 335         /* DDR initialization */
 336         spl_dram_init();
 337
 338         /* setup AIPS and disable watchdog */
 339         arch_cpu_init();
 340
 341         ccgr_init();
 342         gpr_init();
 343
 344         /* iomux and setup of uart and NAND pins */
 345         board_early_init_f();
 346
 347         /* setup GP timer */
 348         timer_init();
 349
 350         /* UART clocks enabled and gd valid - init serial console */
 351         preloader_console_init();
 352
 353         /* Clear the BSS. */
 354         memset(__bss_start, 0, __bss_end - __bss_start);
 355
 356         /* load/boot image from boot device */
 357         board_init_r(NULL, 0);
 358 }
 359 #endif