board/liebherr/display5/spl.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2017 DENX Software Engineering
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #include <common.h>
   8 #include <cpu_func.h>
   9 #include <env.h>
  10 #include <image.h>
  11 #include <init.h>
  12 #include <log.h>
  13 #include <serial.h>
  14 #include <spl.h>
  15 #include <linux/delay.h>
  16 #include <linux/libfdt.h>
  17 #include <asm/io.h>
  18 #include <asm/arch/clock.h>
  19 #include <asm/arch/mx6-ddr.h>
  20 #include <asm/arch/mx6-pins.h>
  21 #include "asm/arch/crm_regs.h"
  22 #include <asm/arch/sys_proto.h>
  23 #include <asm/arch/imx-regs.h>
  24 #include "asm/arch/iomux.h"
  25 #include <asm/mach-imx/iomux-v3.h>
  26 #include <asm/gpio.h>
  27 #include <fsl_esdhc_imx.h>
  28 #include <netdev.h>
  29 #include <bootcount.h>
  30 #include <watchdog.h>
  31 #include "common.h"
  32
  33 DECLARE_GLOBAL_DATA_PTR;
  34
  35 static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
  36         .dram_sdclk_0 = 0x00000030,
  37         .dram_sdclk_1 = 0x00000030,
  38         .dram_cas = 0x00000030,
  39         .dram_ras = 0x00000030,
  40         .dram_reset = 0x00000030,
  41         .dram_sdcke0 = 0x00003000,
  42         .dram_sdcke1 = 0x00003000,
  43         .dram_sdba2 = 0x00000000,
  44         .dram_sdodt0 = 0x00000030,
  45         .dram_sdodt1 = 0x00000030,
  46
  47         .dram_sdqs0 = 0x00000030,
  48         .dram_sdqs1 = 0x00000030,
  49         .dram_sdqs2 = 0x00000030,
  50         .dram_sdqs3 = 0x00000030,
  51         .dram_sdqs4 = 0x00000030,
  52         .dram_sdqs5 = 0x00000030,
  53         .dram_sdqs6 = 0x00000030,
  54         .dram_sdqs7 = 0x00000030,
  55
  56         .dram_dqm0 = 0x00000030,
  57         .dram_dqm1 = 0x00000030,
  58         .dram_dqm2 = 0x00000030,
  59         .dram_dqm3 = 0x00000030,
  60         .dram_dqm4 = 0x00000030,
  61         .dram_dqm5 = 0x00000030,
  62         .dram_dqm6 = 0x00000030,
  63         .dram_dqm7 = 0x00000030,
  64 };
  65
  66 static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
  67         .grp_ddr_type = 0x000c0000,
  68         .grp_ddrmode_ctl = 0x00020000,
  69         .grp_ddrpke = 0x00000000,
  70         .grp_addds = 0x00000030,
  71         .grp_ctlds = 0x00000030,
  72         .grp_ddrmode = 0x00020000,
  73         .grp_b0ds = 0x00000030,
  74         .grp_b1ds = 0x00000030,
  75         .grp_b2ds = 0x00000030,
  76         .grp_b3ds = 0x00000030,
  77         .grp_b4ds = 0x00000030,
  78         .grp_b5ds = 0x00000030,
  79         .grp_b6ds = 0x00000030,
  80         .grp_b7ds = 0x00000030,
  81 };
  82
  83 /* 4x128Mx16.cfg */
  84 static const struct mx6_mmdc_calibration mx6_4x256mx16_mmdc_calib = {
  85         .p0_mpwldectrl0 = 0x002D0028,
  86         .p0_mpwldectrl1 = 0x0032002D,
  87         .p1_mpwldectrl0 = 0x00210036,
  88         .p1_mpwldectrl1 = 0x0019002E,
  89         .p0_mpdgctrl0 = 0x4349035C,
  90         .p0_mpdgctrl1 = 0x0348033D,
  91         .p1_mpdgctrl0 = 0x43550362,
  92         .p1_mpdgctrl1 = 0x03520316,
  93         .p0_mprddlctl = 0x41393940,
  94         .p1_mprddlctl = 0x3F3A3C47,
  95         .p0_mpwrdlctl = 0x413A423A,
  96         .p1_mpwrdlctl = 0x4042483E,
  97 };
  98
  99 /* MT41K128M16JT-125 (2Gb density) */
 100 static const struct mx6_ddr3_cfg mt41k128m16jt_125 = {
 101         .mem_speed = 1600,
 102         .density = 2,
 103         .width = 16,
 104         .banks = 8,
 105         .rowaddr = 14,
 106         .coladdr = 10,
 107         .pagesz = 2,
 108         .trcd = 1375,
 109         .trcmin = 4875,
 110         .trasmin = 3500,
 111 };
 112
 113 iomux_v3_cfg_t const uart_console_pads[] = {
 114         /* UART5 */
 115         MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 116         MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 117         MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
 118         MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
 119 };
 120
 121 void displ5_set_iomux_uart_spl(void)
 122 {
 123         SETUP_IOMUX_PADS(uart_console_pads);
 124 }
 125
 126 iomux_v3_cfg_t const misc_pads_spl[] = {
 127         /* Emergency recovery pin */
 128         MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 129 };
 130
 131 void displ5_set_iomux_misc_spl(void)
 132 {
 133         SETUP_IOMUX_PADS(misc_pads_spl);
 134 }
 135
 136 #ifdef CONFIG_MXC_SPI
 137 iomux_v3_cfg_t const ecspi2_pads[] = {
 138         /* SPI2, NOR Flash nWP, CS0 */
 139         MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
 140         MX6_PAD_CSI0_DAT9__ECSPI2_MOSI  | MUX_PAD_CTRL(SPI_PAD_CTRL),
 141         MX6_PAD_CSI0_DAT8__ECSPI2_SCLK  | MUX_PAD_CTRL(SPI_PAD_CTRL),
 142         MX6_PAD_CSI0_DAT11__GPIO5_IO29  | MUX_PAD_CTRL(NO_PAD_CTRL),
 143         MX6_PAD_SD3_DAT5__GPIO7_IO00    | MUX_PAD_CTRL(NO_PAD_CTRL),
 144 };
 145
 146 int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
 147 {
 148         if (bus != 1 || cs != 0)
 149                 return -EINVAL;
 150
 151         return IMX_GPIO_NR(5, 29);
 152 }
 153
 154 void displ5_set_iomux_ecspi_spl(void)
 155 {
 156         SETUP_IOMUX_PADS(ecspi2_pads);
 157 }
 158
 159 #else
 160 void displ5_set_iomux_ecspi_spl(void) {}
 161 #endif
 162
 163 #ifdef CONFIG_FSL_ESDHC_IMX
 164 iomux_v3_cfg_t const usdhc4_pads[] = {
 165         MX6_PAD_SD4_CLK__SD4_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 166         MX6_PAD_SD4_CMD__SD4_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 167         MX6_PAD_SD4_DAT0__SD4_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 168         MX6_PAD_SD4_DAT1__SD4_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 169         MX6_PAD_SD4_DAT2__SD4_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 170         MX6_PAD_SD4_DAT3__SD4_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 171         MX6_PAD_SD4_DAT4__SD4_DATA4     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 172         MX6_PAD_SD4_DAT5__SD4_DATA5     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 173         MX6_PAD_SD4_DAT6__SD4_DATA6     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 174         MX6_PAD_SD4_DAT7__SD4_DATA7     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 175         MX6_PAD_NANDF_ALE__SD4_RESET    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 176 };
 177
 178 void displ5_set_iomux_usdhc_spl(void)
 179 {
 180         SETUP_IOMUX_PADS(usdhc4_pads);
 181 }
 182
 183 #else
 184 void displ5_set_iomux_usdhc_spl(void) {}
 185 #endif
 186
 187 static void ccgr_init(void)
 188 {
 189         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 190
 191         writel(0x00C03F3F, &ccm->CCGR0);
 192         writel(0x0030FC3F, &ccm->CCGR1);
 193         writel(0x0FFFCFC0, &ccm->CCGR2);
 194         writel(0x3FF00000, &ccm->CCGR3);
 195         writel(0x00FFF300, &ccm->CCGR4);
 196         writel(0x0F0000C3, &ccm->CCGR5);
 197         writel(0x000003FF, &ccm->CCGR6);
 198 }
 199
 200 #ifdef CONFIG_MX6_DDRCAL
 201 static void spl_dram_print_cal(struct mx6_ddr_sysinfo const *sysinfo)
 202 {
 203         struct mx6_mmdc_calibration calibration = {0};
 204
 205         mmdc_read_calibration(sysinfo, &calibration);
 206
 207         debug(".p0_mpdgctrl0\t= 0x%08X\n", calibration.p0_mpdgctrl0);
 208         debug(".p0_mpdgctrl1\t= 0x%08X\n", calibration.p0_mpdgctrl1);
 209         debug(".p0_mprddlctl\t= 0x%08X\n", calibration.p0_mprddlctl);
 210         debug(".p0_mpwrdlctl\t= 0x%08X\n", calibration.p0_mpwrdlctl);
 211         debug(".p0_mpwldectrl0\t= 0x%08X\n", calibration.p0_mpwldectrl0);
 212         debug(".p0_mpwldectrl1\t= 0x%08X\n", calibration.p0_mpwldectrl1);
 213         debug(".p1_mpdgctrl0\t= 0x%08X\n", calibration.p1_mpdgctrl0);
 214         debug(".p1_mpdgctrl1\t= 0x%08X\n", calibration.p1_mpdgctrl1);
 215         debug(".p1_mprddlctl\t= 0x%08X\n", calibration.p1_mprddlctl);
 216         debug(".p1_mpwrdlctl\t= 0x%08X\n", calibration.p1_mpwrdlctl);
 217         debug(".p1_mpwldectrl0\t= 0x%08X\n", calibration.p1_mpwldectrl0);
 218         debug(".p1_mpwldectrl1\t= 0x%08X\n", calibration.p1_mpwldectrl1);
 219 }
 220
 221 static void spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo)
 222 {
 223         int ret;
 224
 225         /* Perform DDR DRAM calibration */
 226         udelay(100);
 227         ret = mmdc_do_write_level_calibration(sysinfo);
 228         if (ret) {
 229                 printf("DDR: Write level calibration error [%d]\n", ret);
 230                 return;
 231         }
 232
 233         ret = mmdc_do_dqs_calibration(sysinfo);
 234         if (ret) {
 235                 printf("DDR: DQS calibration error [%d]\n", ret);
 236                 return;
 237         }
 238
 239         spl_dram_print_cal(sysinfo);
 240 }
 241 #endif /* CONFIG_MX6_DDRCAL */
 242
 243 static void spl_dram_init(void)
 244 {
 245         struct mx6_ddr_sysinfo sysinfo = {
 246                 /* width of data bus:0=16,1=32,2=64 */
 247                 .dsize = 2,
 248                 /* config for full 4GB range so that get_mem_size() works */
 249                 .cs_density = 32, /* 32Gb per CS */
 250                 /* single chip select */
 251                 .ncs = 1,
 252                 .cs1_mirror = 0,
 253                 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/,        /* RTT_Wr = RZQ/4 */
 254                 .rtt_nom = 2 /*DDR3_RTT_120_OHM*/,      /* RTT_Nom = RZQ/2 */
 255                 .walat = 1,     /* Write additional latency */
 256                 .ralat = 5,     /* Read additional latency */
 257                 .mif3_mode = 3, /* Command prediction working mode */
 258                 .bi_on = 1,     /* Bank interleaving enabled */
 259                 .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
 260                 .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
 261                 .pd_fast_exit = 1, /* enable precharge power-down fast exit */
 262                 .ddr_type = DDR_TYPE_DDR3,
 263                 .refsel = 1,    /* Refresh cycles at 32KHz */
 264                 .refr = 7,      /* 8 refresh commands per refresh cycle */
 265         };
 266
 267         mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
 268         mx6_dram_cfg(&sysinfo, &mx6_4x256mx16_mmdc_calib, &mt41k128m16jt_125);
 269
 270 #ifdef CONFIG_MX6_DDRCAL
 271         spl_dram_perform_cal(&sysinfo);
 272 #endif
 273 }
 274
 275 #ifdef CONFIG_SPL_SPI_SUPPORT
 276 static void displ5_init_ecspi(void)
 277 {
 278         displ5_set_iomux_ecspi_spl();
 279         enable_spi_clk(1, 1);
 280 }
 281 #else
 282 static inline void displ5_init_ecspi(void) { }
 283 #endif
 284
 285 #ifdef CONFIG_SPL_MMC_SUPPORT
 286 static struct fsl_esdhc_cfg usdhc_cfg = {
 287         .esdhc_base = USDHC4_BASE_ADDR,
 288         .max_bus_width = 8,
 289 };
 290
 291 int board_mmc_init(bd_t *bd)
 292 {
 293         displ5_set_iomux_usdhc_spl();
 294
 295         usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 296         gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
 297
 298         return fsl_esdhc_initialize(bd, &usdhc_cfg);
 299 }
 300 #endif
 301
 302 void board_init_f(ulong dummy)
 303 {
 304         ccgr_init();
 305
 306         arch_cpu_init();
 307
 308         gpr_init();
 309
 310         /* setup GP timer */
 311         timer_init();
 312
 313         displ5_set_iomux_uart_spl();
 314
 315         /* UART clocks enabled and gd valid - init serial console */
 316         preloader_console_init();
 317
 318         displ5_init_ecspi();
 319
 320         /* DDR initialization */
 321         spl_dram_init();
 322
 323         /* Clear the BSS. */
 324         memset(__bss_start, 0, __bss_end - __bss_start);
 325
 326         displ5_set_iomux_misc_spl();
 327
 328         /* Initialize and reset WDT in SPL */
 329         hw_watchdog_init();
 330         WATCHDOG_RESET();
 331
 332         /* load/boot image from boot device */
 333         board_init_r(NULL, 0);
 334 }
 335
 336 #define EM_PAD IMX_GPIO_NR(3, 29)
 337 int board_check_emergency_pad(void)
 338 {
 339         int ret;
 340
 341         ret = gpio_direction_input(EM_PAD);
 342         if (ret)
 343                 return ret;
 344
 345         return !gpio_get_value(EM_PAD);
 346 }
 347
 348 void board_boot_order(u32 *spl_boot_list)
 349 {
 350         /* Default boot sequence SPI -> MMC */
 351         spl_boot_list[0] = spl_boot_device();
 352         spl_boot_list[1] = BOOT_DEVICE_MMC1;
 353         spl_boot_list[2] = BOOT_DEVICE_UART;
 354         spl_boot_list[3] = BOOT_DEVICE_NONE;
 355
 356         /*
 357          * In case of emergency PAD pressed, we always boot
 358          * to proper u-boot and perform recovery tasks there.
 359          */
 360         if (board_check_emergency_pad())
 361                 return;
 362
 363 #ifdef CONFIG_SPL_ENV_SUPPORT
 364         /* 'fastboot' */
 365         const char *s;
 366
 367         if (env_init() || env_load())
 368                 return;
 369
 370         s = env_get("BOOT_FROM");
 371         if (s && !bootcount_error() && strcmp(s, "ACTIVE") == 0) {
 372                 spl_boot_list[0] = BOOT_DEVICE_MMC1;
 373                 spl_boot_list[1] = spl_boot_device();
 374         }
 375 #endif
 376 }
 377
 378 void reset_cpu(ulong addr) {}
 379
 380 #ifdef CONFIG_SPL_LOAD_FIT
 381 int board_fit_config_name_match(const char *name)
 382 {
 383         return 0;
 384 }
 385 #endif
 386
 387 #ifdef CONFIG_SPL_OS_BOOT
 388 /* Return: 1 - boot to U-Boot. 0 - boot OS (falcon mode) */
 389 int spl_start_uboot(void)
 390 {
 391         /* break into full u-boot on 'c' */
 392         if (serial_tstc() && serial_getc() == 'c')
 393                 return 1;
 394
 395 #ifdef CONFIG_SPL_ENV_SUPPORT
 396         if (env_get_yesno("boot_os") != 1)
 397                 return 1;
 398 #endif
 399         return 0;
 400 }
 401 #endif