board/freescale/t102xqds/t102xqds.c

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <command.h>
   9 #include <i2c.h>
  10 #include <netdev.h>
  11 #include <linux/compiler.h>
  12 #include <asm/mmu.h>
  13 #include <asm/processor.h>
  14 #include <asm/cache.h>
  15 #include <asm/immap_85xx.h>
  16 #include <asm/fsl_law.h>
  17 #include <asm/fsl_serdes.h>
  18 #include <asm/fsl_liodn.h>
  19 #include <fm_eth.h>
  20 #include <hwconfig.h>
  21 #include "../common/qixis.h"
  22 #include "t102xqds.h"
  23 #include "t102xqds_qixis.h"
  24 #include "../common/sleep.h"
  25
  26 DECLARE_GLOBAL_DATA_PTR;
  27
  28 int checkboard(void)
  29 {
  30         char buf[64];
  31         struct cpu_type *cpu = gd->arch.cpu;
  32         static const char *const freq[] = {"100", "125", "156.25", "100.0"};
  33         int clock;
  34         u8 sw = QIXIS_READ(arch);
  35
  36         printf("Board: %sQDS, ", cpu->name);
  37         printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
  38         printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
  39
  40 #ifdef CONFIG_SDCARD
  41         puts("SD/MMC\n");
  42 #elif CONFIG_SPIFLASH
  43         puts("SPI\n");
  44 #else
  45         sw = QIXIS_READ(brdcfg[0]);
  46         sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
  47
  48         if (sw < 0x8)
  49                 printf("vBank: %d\n", sw);
  50         else if (sw == 0x8)
  51                 puts("PromJet\n");
  52         else if (sw == 0x9)
  53                 puts("NAND\n");
  54         else if (sw == 0x15)
  55                 printf("IFC Card\n");
  56         else
  57                 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
  58 #endif
  59
  60         printf("FPGA: v%d (%s), build %d",
  61                (int)QIXIS_READ(scver), qixis_read_tag(buf),
  62                (int)qixis_read_minor());
  63         /* the timestamp string contains "\n" at the end */
  64         printf(" on %s", qixis_read_time(buf));
  65
  66         puts("SERDES Reference: ");
  67         sw = QIXIS_READ(brdcfg[2]);
  68         clock = (sw >> 6) & 3;
  69         printf("Clock1=%sMHz ", freq[clock]);
  70         clock = (sw >> 4) & 3;
  71         printf("Clock2=%sMHz\n", freq[clock]);
  72
  73         return 0;
  74 }
  75
  76 int select_i2c_ch_pca9547(u8 ch)
  77 {
  78         int ret;
  79
  80         ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
  81         if (ret) {
  82                 puts("PCA: failed to select proper channel\n");
  83                 return ret;
  84         }
  85
  86         return 0;
  87 }
  88
  89 static int board_mux_lane_to_slot(void)
  90 {
  91         ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  92         u32 srds_prtcl_s1;
  93         u8 brdcfg9;
  94
  95         srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
  96                                 FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
  97         srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
  98
  99
 100         brdcfg9 = QIXIS_READ(brdcfg[9]);
 101         QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
 102
 103         switch (srds_prtcl_s1) {
 104         case 0:
 105                 /* SerDes1 is not enabled */
 106                 break;
 107         case 0xd5:
 108         case 0x5b:
 109         case 0x6b:
 110         case 0x77:
 111         case 0x6f:
 112         case 0x7f:
 113                 QIXIS_WRITE(brdcfg[12], 0x8c);
 114                 break;
 115         case 0x40:
 116                 QIXIS_WRITE(brdcfg[12], 0xfc);
 117                 break;
 118         case 0xd6:
 119         case 0x5a:
 120         case 0x6a:
 121         case 0x56:
 122                 QIXIS_WRITE(brdcfg[12], 0x88);
 123                 break;
 124         case 0x47:
 125                 QIXIS_WRITE(brdcfg[12], 0xcc);
 126                 break;
 127         case 0x46:
 128                 QIXIS_WRITE(brdcfg[12], 0xc8);
 129                 break;
 130         case 0x95:
 131         case 0x99:
 132                 brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
 133                 QIXIS_WRITE(brdcfg[9], brdcfg9);
 134                 QIXIS_WRITE(brdcfg[12], 0x8c);
 135                 break;
 136         case 0x116:
 137                 QIXIS_WRITE(brdcfg[12], 0x00);
 138                 break;
 139         case 0x115:
 140         case 0x119:
 141         case 0x129:
 142         case 0x12b:
 143                 /* Aurora, PCIe, SGMII, SATA */
 144                 QIXIS_WRITE(brdcfg[12], 0x04);
 145                 break;
 146         default:
 147                 printf("WARNING: unsupported for SerDes Protocol %d\n",
 148                        srds_prtcl_s1);
 149                 return -1;
 150         }
 151
 152         return 0;
 153 }
 154
 155 #ifdef CONFIG_ARCH_T1024
 156 static void board_mux_setup(void)
 157 {
 158         u8 brdcfg15;
 159
 160         brdcfg15 = QIXIS_READ(brdcfg[15]);
 161         brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
 162
 163         if (hwconfig_arg_cmp("pin_mux", "tdm")) {
 164                 /* Route QE_TDM multiplexed signals to TDM Riser slot */
 165                 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
 166                 QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
 167                 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
 168                             ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
 169         } else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
 170                 /* to UCC (ProfiBus) interface */
 171                 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
 172         } else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
 173                 /* to DVI (HDMI) encoder */
 174                 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
 175         } else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
 176                 /* to DFP (LCD) encoder */
 177                 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
 178                             BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
 179         }
 180
 181         if (hwconfig_arg_cmp("adaptor", "sdxc"))
 182                 /* Route SPI_CS multiplexed signals to SD slot */
 183                 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
 184                             ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
 185 }
 186 #endif
 187
 188 void board_retimer_ds125df111_init(void)
 189 {
 190         u8 reg;
 191
 192         /* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
 193         reg = I2C_MUX_CH7;
 194         i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
 195         reg = I2C_MUX_CH5;
 196         i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
 197
 198         /* Access to Control/Shared register */
 199         reg = 0x0;
 200         i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
 201
 202         /* Read device revision and ID */
 203         i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
 204         debug("Retimer version id = 0x%x\n", reg);
 205
 206         /* Enable Broadcast */
 207         reg = 0x0c;
 208         i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
 209
 210         /* Reset Channel Registers */
 211         i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
 212         reg |= 0x4;
 213         i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
 214
 215         /* Enable override divider select and Enable Override Output Mux */
 216         i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
 217         reg |= 0x24;
 218         i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
 219
 220         /* Select VCO Divider to full rate (000) */
 221         i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
 222         reg &= 0x8f;
 223         i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
 224
 225         /* Select active PFD MUX input as re-timed data (001) */
 226         i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
 227         reg &= 0x3f;
 228         reg |= 0x20;
 229         i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
 230
 231         /* Set data rate as 10.3125 Gbps */
 232         reg = 0x0;
 233         i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
 234         reg = 0xb2;
 235         i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
 236         reg = 0x90;
 237         i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
 238         reg = 0xb3;
 239         i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
 240         reg = 0xcd;
 241         i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
 242 }
 243
 244 int board_early_init_f(void)
 245 {
 246 #if defined(CONFIG_DEEP_SLEEP)
 247         if (is_warm_boot())
 248                 fsl_dp_disable_console();
 249 #endif
 250
 251         return 0;
 252 }
 253
 254 int board_early_init_r(void)
 255 {
 256 #ifdef CONFIG_SYS_FLASH_BASE
 257         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 258         int flash_esel = find_tlb_idx((void *)flashbase, 1);
 259
 260         /*
 261          * Remap Boot flash + PROMJET region to caching-inhibited
 262          * so that flash can be erased properly.
 263          */
 264
 265         /* Flush d-cache and invalidate i-cache of any FLASH data */
 266         flush_dcache();
 267         invalidate_icache();
 268
 269         if (flash_esel == -1) {
 270                 /* very unlikely unless something is messed up */
 271                 puts("Error: Could not find TLB for FLASH BASE\n");
 272                 flash_esel = 2; /* give our best effort to continue */
 273         } else {
 274                 /* invalidate existing TLB entry for flash + promjet */
 275                 disable_tlb(flash_esel);
 276         }
 277
 278         set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
 279                 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 280                 0, flash_esel, BOOKE_PAGESZ_256M, 1);
 281 #endif
 282         select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 283         board_mux_lane_to_slot();
 284         board_retimer_ds125df111_init();
 285
 286         /* Increase IO drive strength to address FCS error on RGMII */
 287         out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
 288
 289         return 0;
 290 }
 291
 292 unsigned long get_board_sys_clk(void)
 293 {
 294         u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
 295
 296         switch (sysclk_conf & 0x0F) {
 297         case QIXIS_SYSCLK_64:
 298                 return 64000000;
 299         case QIXIS_SYSCLK_83:
 300                 return 83333333;
 301         case QIXIS_SYSCLK_100:
 302                 return 100000000;
 303         case QIXIS_SYSCLK_125:
 304                 return 125000000;
 305         case QIXIS_SYSCLK_133:
 306                 return 133333333;
 307         case QIXIS_SYSCLK_150:
 308                 return 150000000;
 309         case QIXIS_SYSCLK_160:
 310                 return 160000000;
 311         case QIXIS_SYSCLK_166:
 312                 return 166666666;
 313         }
 314         return 66666666;
 315 }
 316
 317 unsigned long get_board_ddr_clk(void)
 318 {
 319         u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
 320
 321         switch ((ddrclk_conf & 0x30) >> 4) {
 322         case QIXIS_DDRCLK_100:
 323                 return 100000000;
 324         case QIXIS_DDRCLK_125:
 325                 return 125000000;
 326         case QIXIS_DDRCLK_133:
 327                 return 133333333;
 328         }
 329         return 66666666;
 330 }
 331
 332 #define NUM_SRDS_PLL    2
 333 int misc_init_r(void)
 334 {
 335 #ifdef CONFIG_ARCH_T1024
 336         board_mux_setup();
 337 #endif
 338         return 0;
 339 }
 340
 341 void fdt_fixup_spi_mux(void *blob)
 342 {
 343         int nodeoff = 0;
 344
 345         if (hwconfig_arg_cmp("pin_mux", "tdm")) {
 346                 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 347                         "eon,en25s64")) >= 0) {
 348                         fdt_del_node(blob, nodeoff);
 349                 }
 350         } else {
 351                 /* remove tdm node */
 352                 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 353                         "maxim,ds26522")) >= 0) {
 354                         fdt_del_node(blob, nodeoff);
 355                 }
 356         }
 357 }
 358
 359 int ft_board_setup(void *blob, bd_t *bd)
 360 {
 361         phys_addr_t base;
 362         phys_size_t size;
 363
 364         ft_cpu_setup(blob, bd);
 365
 366         base = env_get_bootm_low();
 367         size = env_get_bootm_size();
 368
 369         fdt_fixup_memory(blob, (u64)base, (u64)size);
 370
 371 #ifdef CONFIG_PCI
 372         pci_of_setup(blob, bd);
 373 #endif
 374
 375         fdt_fixup_liodn(blob);
 376
 377 #ifdef CONFIG_HAS_FSL_DR_USB
 378         fsl_fdt_fixup_dr_usb(blob, bd);
 379 #endif
 380
 381 #ifdef CONFIG_SYS_DPAA_FMAN
 382         fdt_fixup_fman_ethernet(blob);
 383         fdt_fixup_board_enet(blob);
 384 #endif
 385         fdt_fixup_spi_mux(blob);
 386
 387         return 0;
 388 }
 389
 390 void qixis_dump_switch(void)
 391 {
 392         int i, nr_of_cfgsw;
 393
 394         QIXIS_WRITE(cms[0], 0x00);
 395         nr_of_cfgsw = QIXIS_READ(cms[1]);
 396
 397         puts("DIP switch settings dump:\n");
 398         for (i = 1; i <= nr_of_cfgsw; i++) {
 399                 QIXIS_WRITE(cms[0], i);
 400                 printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 401         }
 402 }