board/freescale/ls2085ardb/ddr.c

   1 /*
   2  * Copyright 2015 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <fsl_ddr_sdram.h>
   9 #include <fsl_ddr_dimm_params.h>
  10 #include "ddr.h"
  11
  12 DECLARE_GLOBAL_DATA_PTR;
  13
  14 void fsl_ddr_board_options(memctl_options_t *popts,
  15                                 dimm_params_t *pdimm,
  16                                 unsigned int ctrl_num)
  17 {
  18         u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
  19         const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
  20         ulong ddr_freq;
  21         int slot;
  22
  23         if (ctrl_num > 2) {
  24                 printf("Not supported controller number %d\n", ctrl_num);
  25                 return;
  26         }
  27
  28         for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
  29                 if (pdimm[slot].n_ranks)
  30                         break;
  31         }
  32
  33         if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
  34                 return;
  35
  36         /*
  37          * we use identical timing for all slots. If needed, change the code
  38          * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
  39          */
  40         if (popts->registered_dimm_en)
  41                 pbsp = rdimms[ctrl_num];
  42         else
  43                 pbsp = udimms[ctrl_num];
  44
  45
  46         /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
  47          * freqency and n_banks specified in board_specific_parameters table.
  48          */
  49         ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
  50         while (pbsp->datarate_mhz_high) {
  51                 if (pbsp->n_ranks == pdimm[slot].n_ranks &&
  52                     (pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
  53                         if (ddr_freq <= pbsp->datarate_mhz_high) {
  54                                 popts->clk_adjust = pbsp->clk_adjust;
  55                                 popts->wrlvl_start = pbsp->wrlvl_start;
  56                                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  57                                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  58                                 goto found;
  59                         }
  60                         pbsp_highest = pbsp;
  61                 }
  62                 pbsp++;
  63         }
  64
  65         if (pbsp_highest) {
  66                 printf("Error: board specific timing not found for data rate %lu MT/s\n"
  67                         "Trying to use the highest speed (%u) parameters\n",
  68                         ddr_freq, pbsp_highest->datarate_mhz_high);
  69                 popts->clk_adjust = pbsp_highest->clk_adjust;
  70                 popts->wrlvl_start = pbsp_highest->wrlvl_start;
  71                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  72                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  73         } else {
  74                 panic("DIMM is not supported by this board");
  75         }
  76 found:
  77         debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
  78                 "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
  79                 pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
  80                 pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
  81                 pbsp->wrlvl_ctl_3);
  82
  83         if (ctrl_num == CONFIG_DP_DDR_CTRL) {
  84                 /* force DDR bus width to 32 bits */
  85                 popts->data_bus_width = 1;
  86                 popts->otf_burst_chop_en = 0;
  87                 popts->burst_length = DDR_BL8;
  88                 popts->bstopre = 0;     /* enable auto precharge */
  89                 /*
  90                  * Layout optimization results byte mapping
  91                  * Byte 0 -> Byte ECC
  92                  * Byte 1 -> Byte 3
  93                  * Byte 2 -> Byte 2
  94                  * Byte 3 -> Byte 1
  95                  * Byte ECC -> Byte 0
  96                  */
  97                 dq_mapping_0 = pdimm[slot].dq_mapping[0];
  98                 dq_mapping_2 = pdimm[slot].dq_mapping[2];
  99                 dq_mapping_3 = pdimm[slot].dq_mapping[3];
 100                 pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
 101                 pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
 102                 pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
 103                 pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
 104                 pdimm[slot].dq_mapping[6] = dq_mapping_2;
 105                 pdimm[slot].dq_mapping[7] = dq_mapping_3;
 106                 pdimm[slot].dq_mapping[8] = dq_mapping_0;
 107                 pdimm[slot].dq_mapping[9] = 0;
 108                 pdimm[slot].dq_mapping[10] = 0;
 109                 pdimm[slot].dq_mapping[11] = 0;
 110                 pdimm[slot].dq_mapping[12] = 0;
 111                 pdimm[slot].dq_mapping[13] = 0;
 112                 pdimm[slot].dq_mapping[14] = 0;
 113                 pdimm[slot].dq_mapping[15] = 0;
 114                 pdimm[slot].dq_mapping[16] = 0;
 115                 pdimm[slot].dq_mapping[17] = 0;
 116         }
 117         /* To work at higher than 1333MT/s */
 118         popts->half_strength_driver_enable = 0;
 119         /*
 120          * Write leveling override
 121          */
 122         popts->wrlvl_override = 1;
 123         popts->wrlvl_sample = 0x0;      /* 32 clocks */
 124
 125         /*
 126          * Rtt and Rtt_WR override
 127          */
 128         popts->rtt_override = 0;
 129
 130         /* Enable ZQ calibration */
 131         popts->zq_en = 1;
 132
 133         if (ddr_freq < 2350) {
 134                 popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
 135                                   DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
 136                 popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
 137                                   DDR_CDR2_VREF_RANGE_2;
 138         } else {
 139                 popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
 140                                   DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
 141                 popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
 142                                   DDR_CDR2_VREF_RANGE_2;
 143         }
 144 }
 145
 146 phys_size_t initdram(int board_type)
 147 {
 148         phys_size_t dram_size;
 149
 150 #if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
 151         return fsl_ddr_sdram_size();
 152 #else
 153         puts("Initializing DDR....using SPD\n");
 154
 155         dram_size = fsl_ddr_sdram();
 156 #endif
 157
 158         return dram_size;
 159 }
 160
 161 void dram_init_banksize(void)
 162 {
 163 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 164         phys_size_t dp_ddr_size;
 165 #endif
 166
 167         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 168         if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
 169                 gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
 170                 gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
 171                 gd->bd->bi_dram[1].size = gd->ram_size -
 172                                           CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
 173         } else {
 174                 gd->bd->bi_dram[0].size = gd->ram_size;
 175         }
 176
 177 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 178         /* initialize DP-DDR here */
 179         puts("DP-DDR:  ");
 180         /*
 181          * DDR controller use 0 as the base address for binding.
 182          * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
 183          */
 184         dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 185                                           CONFIG_DP_DDR_CTRL,
 186                                           CONFIG_DP_DDR_NUM_CTRLS,
 187                                           CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 188                                           NULL, NULL, NULL);
 189         if (dp_ddr_size) {
 190                 gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
 191                 gd->bd->bi_dram[2].size = dp_ddr_size;
 192         } else {
 193                 puts("Not detected");
 194         }
 195 #endif
 196 }