board/amlogic/w400/README.w400

   1 U-Boot for Amlogic W400
   2 =======================
   3
   4 U200 is a reference board manufactured by Amlogic with the following
   5 specifications:
   6
   7  - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
   8  - 2GB DDR4 SDRAM
   9  - 10/100 Ethernet (Internal PHY)
  10  - 1 x USB 3.0 Host
  11  - eMMC
  12  - SDcard
  13  - Infrared receiver
  14  - SDIO WiFi Module
  15  - MIPI DSI Connector
  16  - Audio HAT Connector
  17  - PCI-E M.2 Connector
  18
  19 Schematics are available from Amlogic on demand.
  20
  21 Currently the u-boot port supports the following devices:
  22  - serial
  23  - Ethernet
  24  - Regulators
  25  - Clock controller
  26
  27 u-boot compilation
  28 ==================
  29
  30  > export CROSS_COMPILE=aarch64-none-elf-
  31  > make w400_defconfig
  32  > make
  33
  34 Image creation
  35 ==============
  36
  37 Amlogic doesn't provide sources for the firmware and for tools needed
  38 to create the bootloader image, so it is necessary to obtain them from
  39 the git tree published by the board vendor:
  40
  41  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  42  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  43  > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  44  > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  45  > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
  46  > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
  47  > cd amlogic-u-boot
  48  > make g12b_w400_v1_defconfig
  49  > make
  50  > export UBOOTDIR=$PWD
  51
  52 Download the latest Amlogic Buildroot package, and extract it :
  53  > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
  54  > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
  55  > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
  56  > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
  57
  58 Go back to mainline U-Boot source tree then :
  59  > mkdir fip
  60
  61  > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
  62  > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
  63  > cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/
  64  > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/
  65  > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/
  66  > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/
  67  > cp $FIPDIR/g12b/ddr3_1d.fw fip/
  68  > cp $FIPDIR/g12b/ddr4_1d.fw fip/
  69  > cp $FIPDIR/g12b/ddr4_2d.fw fip/
  70  > cp $FIPDIR/g12b/diag_lpddr4.fw fip/
  71  > cp $FIPDIR/g12b/lpddr4_1d.fw fip/
  72  > cp $FIPDIR/g12b/lpddr4_2d.fw fip/
  73  > cp $FIPDIR/g12b/piei.fw fip/
  74  > cp $FIPDIR/g12b/aml_ddr.fw fip/
  75  > cp u-boot.bin fip/bl33.bin
  76
  77  > sh fip/blx_fix.sh \
  78         fip/bl30.bin \
  79         fip/zero_tmp \
  80         fip/bl30_zero.bin \
  81         fip/bl301.bin \
  82         fip/bl301_zero.bin \
  83         fip/bl30_new.bin \
  84         bl30
  85
  86  > sh fip/blx_fix.sh \
  87         fip/bl2.bin \
  88         fip/zero_tmp \
  89         fip/bl2_zero.bin \
  90         fip/acs.bin \
  91         fip/bl21_zero.bin \
  92         fip/bl2_new.bin \
  93         bl2
  94
  95  > $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
  96                                         --output fip/bl30_new.bin.g12a.enc \
  97                                         --level v3
  98  > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
  99                                         --output fip/bl30_new.bin.enc \
 100                                         --level v3 --type bl30
 101  > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
 102                                         --output fip/bl31.img.enc \
 103                                         --level v3 --type bl31
 104  > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
 105                                         --output fip/bl33.bin.enc \
 106                                         --level v3 --type bl33
 107  > $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
 108                                         --output fip/bl2.n.bin.sig
 109  > $FIPDIR/g12b/aml_encrypt_g12b --bootmk \
 110                 --output fip/u-boot.bin \
 111                 --bl2 fip/bl2.n.bin.sig \
 112                 --bl30 fip/bl30_new.bin.enc \
 113                 --bl31 fip/bl31.img.enc \
 114                 --bl33 fip/bl33.bin.enc \
 115                 --ddrfw1 fip/ddr4_1d.fw \
 116                 --ddrfw2 fip/ddr4_2d.fw \
 117                 --ddrfw3 fip/ddr3_1d.fw \
 118                 --ddrfw4 fip/piei.fw \
 119                 --ddrfw5 fip/lpddr4_1d.fw \
 120                 --ddrfw6 fip/lpddr4_2d.fw \
 121                 --ddrfw7 fip/diag_lpddr4.fw \
 122                 --ddrfw8 fip/aml_ddr.fw \
 123                 --level v3
 124
 125 and then write the image to SD with:
 126
 127  > DEV=/dev/your_sd_device
 128  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
 129  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444