board/amlogic/s400/README

   1 U-Boot for Amlogic S400
   2 =======================
   3
   4 S400 is a reference board manufactured by Amlogic with the following
   5 specifications:
   6
   7  - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz
   8  - 1GB DDR4 SDRAM
   9  - 10/100 Ethernet
  10  - 2 x USB 2.0 Host
  11  - eMMC
  12  - Infrared receiver
  13  - SDIO WiFi Module
  14  - MIPI DSI Connector
  15  - Audio HAT Connector
  16  - PCI-E M.2 Connectors
  17
  18 Schematics are available from Amlogic on demand.
  19
  20 Currently the u-boot port supports the following devices:
  21  - serial
  22  - eMMC
  23  - Ethernet
  24  - I2C
  25  - Regulators
  26  - Reset controller
  27  - Clock controller
  28  - USB Host
  29  - ADC
  30
  31 u-boot compilation
  32 ==================
  33
  34  > export ARCH=arm
  35  > export CROSS_COMPILE=aarch64-none-elf-
  36  > make s400_defconfig
  37  > make
  38
  39 Image creation
  40 ==============
  41
  42 Amlogic doesn't provide sources for the firmware and for tools needed
  43 to create the bootloader image, so it is necessary to obtain them from
  44 the git tree published by the board vendor:
  45
  46  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  47  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  48  > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  49  > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  50  > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
  51  > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
  52  > cd amlogic-u-boot
  53  > make axg_s400_v1_defconfig
  54  > make
  55  > export FIPDIR=$PWD/fip
  56
  57 Go back to mainline U-boot source tree then :
  58  > mkdir fip
  59
  60  > cp $FIPDIR/axg/bl2.bin fip/
  61  > cp $FIPDIR/axg/acs.bin fip/
  62  > cp $FIPDIR/axg/bl21.bin fip/
  63  > cp $FIPDIR/axg/bl30.bin fip/
  64  > cp $FIPDIR/axg/bl301.bin fip/
  65  > cp $FIPDIR/axg/bl31.img fip/
  66  > cp u-boot.bin fip/bl33.bin
  67
  68  > $FIPDIR/blx_fix.sh \
  69         fip/bl30.bin \
  70         fip/zero_tmp \
  71         fip/bl30_zero.bin \
  72         fip/bl301.bin \
  73         fip/bl301_zero.bin \
  74         fip/bl30_new.bin \
  75         bl30
  76
  77  > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
  78
  79  > $FIPDIR/blx_fix.sh \
  80         fip/bl2_acs.bin \
  81         fip/zero_tmp \
  82         fip/bl2_zero.bin \
  83         fip/bl21.bin \
  84         fip/bl21_zero.bin \
  85         fip/bl2_new.bin \
  86         bl2
  87
  88  > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
  89                                         --output fip/bl30_new.bin.enc \
  90                                         --level v3 --type bl30
  91  > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \
  92                                         --output fip/bl31.img.enc \
  93                                         --level v3 --type bl31
  94  > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
  95                                         --output fip/bl33.bin.enc \
  96                                         --level v3 --type bl33
  97  > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
  98                                         --output fip/bl2.n.bin.sig
  99  > $FIPDIR/axg/aml_encrypt_axg --bootmk \
 100                 --output fip/u-boot.bin \
 101                 --bl2 fip/bl2.n.bin.sig \
 102                 --bl30 fip/bl30_new.bin.enc \
 103                 --bl31 fip/bl31.img.enc \
 104                 --bl33 fip/bl33.bin.enc --level v3
 105
 106 and then write the image to SD with:
 107
 108  > DEV=/dev/your_sd_device
 109  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
 110  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444