arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 #include <common.h>
   7 #include <log.h>
   8 #include <asm/fsl_serdes.h>
   9 #include <asm/immap_85xx.h>
  10 #include <asm/io.h>
  11 #include <asm/processor.h>
  12 #include <asm/fsl_law.h>
  13 #include <linux/delay.h>
  14 #include <linux/errno.h>
  15 #include <fsl_errata.h>
  16 #include "fsl_corenet2_serdes.h"
  17
  18 #ifdef CONFIG_SYS_FSL_SRDS_1
  19 static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
  20 #endif
  21 #ifdef CONFIG_SYS_FSL_SRDS_2
  22 static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
  23 #endif
  24 #ifdef CONFIG_SYS_FSL_SRDS_3
  25 static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
  26 #endif
  27 #ifdef CONFIG_SYS_FSL_SRDS_4
  28 static u8 serdes4_prtcl_map[SERDES_PRCTL_COUNT];
  29 #endif
  30
  31 #ifdef DEBUG
  32 static const char *serdes_prtcl_str[] = {
  33         [NONE] = "NA",
  34         [PCIE1] = "PCIE1",
  35         [PCIE2] = "PCIE2",
  36         [PCIE3] = "PCIE3",
  37         [PCIE4] = "PCIE4",
  38         [SATA1] = "SATA1",
  39         [SATA2] = "SATA2",
  40         [SRIO1] = "SRIO1",
  41         [SRIO2] = "SRIO2",
  42         [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
  43         [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
  44         [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
  45         [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
  46         [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
  47         [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
  48         [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
  49         [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
  50         [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
  51         [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
  52         [XAUI_FM1] = "XAUI_FM1",
  53         [XAUI_FM2] = "XAUI_FM2",
  54         [AURORA] = "DEBUG",
  55         [CPRI1] = "CPRI1",
  56         [CPRI2] = "CPRI2",
  57         [CPRI3] = "CPRI3",
  58         [CPRI4] = "CPRI4",
  59         [CPRI5] = "CPRI5",
  60         [CPRI6] = "CPRI6",
  61         [CPRI7] = "CPRI7",
  62         [CPRI8] = "CPRI8",
  63         [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
  64         [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
  65         [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
  66         [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
  67         [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
  68         [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
  69         [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
  70         [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
  71         [QSGMII_FM1_A] = "QSGMII_FM1_A",
  72         [QSGMII_FM1_B] = "QSGMII_FM1_B",
  73         [QSGMII_FM2_A] = "QSGMII_FM2_A",
  74         [QSGMII_FM2_B] = "QSGMII_FM2_B",
  75         [XFI_FM1_MAC9] = "XFI_FM1_MAC9",
  76         [XFI_FM1_MAC10] = "XFI_FM1_MAC10",
  77         [XFI_FM2_MAC9] = "XFI_FM2_MAC9",
  78         [XFI_FM2_MAC10] = "XFI_FM2_MAC10",
  79         [INTERLAKEN] = "INTERLAKEN",
  80         [QSGMII_SW1_A] = "QSGMII_SW1_A",
  81         [QSGMII_SW1_B] = "QSGMII_SW1_B",
  82         [SGMII_SW1_MAC1] = "SGMII_SW1_MAC1",
  83         [SGMII_SW1_MAC2] = "SGMII_SW1_MAC2",
  84         [SGMII_SW1_MAC3] = "SGMII_SW1_MAC3",
  85         [SGMII_SW1_MAC4] = "SGMII_SW1_MAC4",
  86         [SGMII_SW1_MAC5] = "SGMII_SW1_MAC5",
  87         [SGMII_SW1_MAC6] = "SGMII_SW1_MAC6",
  88 };
  89 #endif
  90
  91 int is_serdes_configured(enum srds_prtcl device)
  92 {
  93         int ret = 0;
  94
  95 #ifdef CONFIG_SYS_FSL_SRDS_1
  96         if (!serdes1_prtcl_map[NONE])
  97                 fsl_serdes_init();
  98
  99         ret |= serdes1_prtcl_map[device];
 100 #endif
 101 #ifdef CONFIG_SYS_FSL_SRDS_2
 102         if (!serdes2_prtcl_map[NONE])
 103                 fsl_serdes_init();
 104
 105         ret |= serdes2_prtcl_map[device];
 106 #endif
 107 #ifdef CONFIG_SYS_FSL_SRDS_3
 108         if (!serdes3_prtcl_map[NONE])
 109                 fsl_serdes_init();
 110
 111         ret |= serdes3_prtcl_map[device];
 112 #endif
 113 #ifdef CONFIG_SYS_FSL_SRDS_4
 114         if (!serdes4_prtcl_map[NONE])
 115                 fsl_serdes_init();
 116
 117         ret |= serdes4_prtcl_map[device];
 118 #endif
 119
 120         return !!ret;
 121 }
 122
 123 int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 124 {
 125         const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 126         u32 cfg = in_be32(&gur->rcwsr[4]);
 127         int i;
 128
 129         switch (sd) {
 130 #ifdef CONFIG_SYS_FSL_SRDS_1
 131         case FSL_SRDS_1:
 132                 cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 133                 cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 134                 break;
 135 #endif
 136 #ifdef CONFIG_SYS_FSL_SRDS_2
 137         case FSL_SRDS_2:
 138                 cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 139                 cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 140                 break;
 141 #endif
 142 #ifdef CONFIG_SYS_FSL_SRDS_3
 143         case FSL_SRDS_3:
 144                 cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
 145                 cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
 146                 break;
 147 #endif
 148 #ifdef CONFIG_SYS_FSL_SRDS_4
 149         case FSL_SRDS_4:
 150                 cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
 151                 cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
 152                 break;
 153 #endif
 154         default:
 155                 printf("invalid SerDes%d\n", sd);
 156                 break;
 157         }
 158         /* Is serdes enabled at all? */
 159         if (unlikely(cfg == 0))
 160                 return -ENODEV;
 161
 162         for (i = 0; i < SRDS_MAX_LANES; i++) {
 163                 if (serdes_get_prtcl(sd, cfg, i) == device)
 164                         return i;
 165         }
 166
 167         return -ENODEV;
 168 }
 169
 170 #define BC3_SHIFT       9
 171 #define DC3_SHIFT       6
 172 #define FC3_SHIFT       0
 173 #define BC2_SHIFT       19
 174 #define DC2_SHIFT       16
 175 #define FC2_SHIFT       10
 176 #define BC1_SHIFT       29
 177 #define DC1_SHIFT       26
 178 #define FC1_SHIFT       20
 179 #define BC_MASK         0x1
 180 #define DC_MASK         0x7
 181 #define FC_MASK         0x3F
 182
 183 #define FUSE_VAL_MASK           0x00000003
 184 #define FUSE_VAL_SHIFT          30
 185 #define CR0_DCBIAS_SHIFT        5
 186 #define CR1_FCAP_SHIFT          15
 187 #define CR1_BCAP_SHIFT          29
 188 #define FCAP_MASK               0x001F8000
 189 #define BCAP_MASK               0x20000000
 190 #define BCAP_OVD_MASK           0x10000000
 191 #define BYP_CAL_MASK            0x02000000
 192
 193 void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 194                 u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
 195 {
 196         ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 197         u32 cfg;
 198         int lane;
 199
 200         if (serdes_prtcl_map[NONE])
 201                 return;
 202
 203         memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
 204 #ifdef CONFIG_SYS_FSL_ERRATUM_A007186
 205         struct ccsr_sfp_regs  __iomem *sfp_regs =
 206                         (struct ccsr_sfp_regs __iomem *)(CONFIG_SYS_SFP_ADDR);
 207         u32 pll_num, pll_status, bc, dc, fc, pll_cr_upd, pll_cr0, pll_cr1;
 208         u32 bc_status, fc_status, dc_status, pll_sr2;
 209         serdes_corenet_t  __iomem *srds_regs = (void *)sd_addr;
 210         u32 sfp_spfr0, sel;
 211 #endif
 212
 213         cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
 214
 215 /* Erratum A-007186
 216  * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0)
 217  * The workaround requires factory pre-set SerDes calibration values to be
 218  * read from a fuse block(Freescale Scratch Pad Fuse Register SFP_FSPFR0)
 219  * These values have been shown to work across the
 220  * entire temperature range for all SerDes. These values are then written into
 221  * the SerDes registers to calibrate the SerDes PLL.
 222  *
 223  * This workaround for the protocols and rates that only have the Ring VCO.
 224  */
 225 #ifdef CONFIG_SYS_FSL_ERRATUM_A007186
 226         sfp_spfr0 = in_be32(&sfp_regs->fsl_spfr0);
 227         debug("A007186: sfp_spfr0= %x\n", sfp_spfr0);
 228
 229         sel = (sfp_spfr0 >> FUSE_VAL_SHIFT) & FUSE_VAL_MASK;
 230
 231         if (has_erratum_a007186() && (sel == 0x01 || sel == 0x02)) {
 232                 for (pll_num = 0; pll_num < SRDS_MAX_BANK; pll_num++) {
 233                         pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0);
 234                         debug("A007186: pll_num=%x pllcr0=%x\n",
 235                               pll_num, pll_status);
 236                         /* STEP 1 */
 237                         /* Read factory pre-set SerDes calibration values
 238                          * from fuse block(SFP scratch register-sfp_spfr0)
 239                          */
 240                         switch (pll_status & SRDS_PLLCR0_FRATE_SEL_MASK) {
 241                         case SRDS_PLLCR0_FRATE_SEL_3_0:
 242                         case SRDS_PLLCR0_FRATE_SEL_3_072:
 243                                 debug("A007186: 3.0/3.072 protocol rate\n");
 244                                 bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK;
 245                                 dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK;
 246                                 fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK;
 247                                 break;
 248                         case SRDS_PLLCR0_FRATE_SEL_3_125:
 249                                 debug("A007186: 3.125 protocol rate\n");
 250                                 bc = (sfp_spfr0 >> BC2_SHIFT) & BC_MASK;
 251                                 dc = (sfp_spfr0 >> DC2_SHIFT) & DC_MASK;
 252                                 fc = (sfp_spfr0 >> FC2_SHIFT) & FC_MASK;
 253                                 break;
 254                         case SRDS_PLLCR0_FRATE_SEL_3_75:
 255                                 debug("A007186: 3.75 protocol rate\n");
 256                                 bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK;
 257                                 dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK;
 258                                 fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK;
 259                                 break;
 260                         default:
 261                                 continue;
 262                         }
 263
 264                         /* STEP 2 */
 265                         /* Write SRDSxPLLnCR1[11:16] = FC
 266                          * Write SRDSxPLLnCR1[2] = BC
 267                          */
 268                         pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1);
 269                         pll_cr_upd = (((bc << CR1_BCAP_SHIFT) & BCAP_MASK) |
 270                                       ((fc << CR1_FCAP_SHIFT) & FCAP_MASK));
 271                         out_be32(&srds_regs->bank[pll_num].pllcr1,
 272                                  (pll_cr_upd | pll_cr1));
 273                         debug("A007186: pll_num=%x Updated PLLCR1=%x\n",
 274                               pll_num, (pll_cr_upd | pll_cr1));
 275                         /* Write SRDSxPLLnCR0[24:26] = DC
 276                          */
 277                         pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0);
 278                         out_be32(&srds_regs->bank[pll_num].pllcr0,
 279                                  pll_cr0 | (dc << CR0_DCBIAS_SHIFT));
 280                         debug("A007186: pll_num=%x, Updated PLLCR0=%x\n",
 281                               pll_num, (pll_cr0 | (dc << CR0_DCBIAS_SHIFT)));
 282                         /* Write SRDSxPLLnCR1[3] = 1
 283                          * Write SRDSxPLLnCR1[6] = 1
 284                          */
 285                         pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1);
 286                         pll_cr_upd = (BCAP_OVD_MASK | BYP_CAL_MASK);
 287                         out_be32(&srds_regs->bank[pll_num].pllcr1,
 288                                  (pll_cr_upd | pll_cr1));
 289                         debug("A007186: pll_num=%x Updated PLLCR1=%x\n",
 290                               pll_num, (pll_cr_upd | pll_cr1));
 291
 292                         /* STEP 3 */
 293                         /* Read the status Registers */
 294                         /* Verify SRDSxPLLnSR2[8] = BC */
 295                         pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2);
 296                         debug("A007186: pll_num=%x pllsr2=%x\n",
 297                               pll_num, pll_sr2);
 298                         bc_status = (pll_sr2 >> 23) & BC_MASK;
 299                         if (bc_status != bc)
 300                                 debug("BC mismatch\n");
 301                         fc_status = (pll_sr2 >> 16) & FC_MASK;
 302                         if (fc_status != fc)
 303                                 debug("FC mismatch\n");
 304                         pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0);
 305                         out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 |
 306                                                                 0x02000000);
 307                         pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2);
 308                         dc_status = (pll_sr2 >> 17) & DC_MASK;
 309                         if (dc_status != dc)
 310                                 debug("DC mismatch\n");
 311                         pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0);
 312                         out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 &
 313                                                                 0xfdffffff);
 314
 315                         /* STEP 4 */
 316                         /* Wait 750us to verify the PLL is locked
 317                          * by checking SRDSxPLLnCR0[8] = 1.
 318                          */
 319                         udelay(750);
 320                         pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0);
 321                         debug("A007186: pll_num=%x pllcr0=%x\n",
 322                               pll_num, pll_status);
 323
 324                         if ((pll_status & SRDS_PLLCR0_PLL_LCK) == 0)
 325                                 printf("A007186 Serdes PLL not locked\n");
 326                         else
 327                                 debug("A007186 Serdes PLL locked\n");
 328                 }
 329         }
 330 #endif
 331
 332         cfg >>= sd_prctl_shift;
 333         printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
 334         if (!is_serdes_prtcl_valid(sd, cfg))
 335                 printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
 336
 337         for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 338                 enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
 339                 if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
 340                         debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
 341                 else
 342                         serdes_prtcl_map[lane_prtcl] = 1;
 343         }
 344
 345         /* Set the first element to indicate serdes has been initialized */
 346         serdes_prtcl_map[NONE] = 1;
 347 }
 348
 349 void fsl_serdes_init(void)
 350 {
 351
 352 #ifdef CONFIG_SYS_FSL_SRDS_1
 353         serdes_init(FSL_SRDS_1,
 354                     CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
 355                     FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
 356                     FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT,
 357                     serdes1_prtcl_map);
 358 #endif
 359 #ifdef CONFIG_SYS_FSL_SRDS_2
 360         serdes_init(FSL_SRDS_2,
 361                     CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
 362                     FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
 363                     FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT,
 364                     serdes2_prtcl_map);
 365 #endif
 366 #ifdef CONFIG_SYS_FSL_SRDS_3
 367         serdes_init(FSL_SRDS_3,
 368                     CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
 369                     FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
 370                     FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT,
 371                     serdes3_prtcl_map);
 372 #endif
 373 #ifdef CONFIG_SYS_FSL_SRDS_4
 374         serdes_init(FSL_SRDS_4,
 375                     CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
 376                     FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
 377                     FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT,
 378                     serdes4_prtcl_map);
 379 #endif
 380
 381 }
 382
 383 const char *serdes_clock_to_string(u32 clock)
 384 {
 385         switch (clock) {
 386         case SRDS_PLLCR0_RFCK_SEL_100:
 387                 return "100";
 388         case SRDS_PLLCR0_RFCK_SEL_125:
 389                 return "125";
 390         case SRDS_PLLCR0_RFCK_SEL_156_25:
 391                 return "156.25";
 392         case SRDS_PLLCR0_RFCK_SEL_161_13:
 393                 return "161.1328123";
 394         default:
 395 #if defined(CONFIG_TARGET_T4240QDS) || defined(CONFIG_TARGET_T4160QDS)
 396                 return "???";
 397 #else
 398                 return "122.88";
 399 #endif
 400         }
 401 }
 402