arch/powerpc/cpu/mpc85xx/fdt.c

   1 /*
   2  * Copyright 2007-2011 Freescale Semiconductor, Inc.
   3  *
   4  * (C) Copyright 2000
   5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <libfdt.h>
  12 #include <fdt_support.h>
  13 #include <asm/processor.h>
  14 #include <linux/ctype.h>
  15 #include <asm/io.h>
  16 #include <asm/fsl_fdt.h>
  17 #include <asm/fsl_portals.h>
  18 #include <hwconfig.h>
  19 #ifdef CONFIG_FSL_ESDHC
  20 #include <fsl_esdhc.h>
  21 #endif
  22 #ifdef CONFIG_SYS_DPAA_FMAN
  23 #include <fsl_fman.h>
  24 #endif
  25
  26 DECLARE_GLOBAL_DATA_PTR;
  27
  28 extern void ft_qe_setup(void *blob);
  29 extern void ft_fixup_num_cores(void *blob);
  30 extern void ft_srio_setup(void *blob);
  31
  32 #ifdef CONFIG_MP
  33 #include "mp.h"
  34
  35 void ft_fixup_cpu(void *blob, u64 memory_limit)
  36 {
  37         int off;
  38         phys_addr_t spin_tbl_addr = get_spin_phys_addr();
  39         u32 bootpg = determine_mp_bootpg(NULL);
  40         u32 id = get_my_id();
  41         const char *enable_method;
  42 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
  43         int ret;
  44         int tdm_hwconfig_enabled = 0;
  45         char buffer[HWCONFIG_BUFFER_SIZE] = {0};
  46 #endif
  47
  48         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
  49         while (off != -FDT_ERR_NOTFOUND) {
  50                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
  51
  52                 if (reg) {
  53                         u32 phys_cpu_id = thread_to_core(*reg);
  54                         u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
  55                         val = cpu_to_fdt64(val);
  56                         if (*reg == id) {
  57                                 fdt_setprop_string(blob, off, "status",
  58                                                                 "okay");
  59                         } else {
  60                                 fdt_setprop_string(blob, off, "status",
  61                                                                 "disabled");
  62                         }
  63
  64                         if (hold_cores_in_reset(0)) {
  65 #ifdef CONFIG_FSL_CORENET
  66                                 /* Cores held in reset, use BRR to release */
  67                                 enable_method = "fsl,brr-holdoff";
  68 #else
  69                                 /* Cores held in reset, use EEBPCR to release */
  70                                 enable_method = "fsl,eebpcr-holdoff";
  71 #endif
  72                         } else {
  73                                 /* Cores out of reset and in a spin-loop */
  74                                 enable_method = "spin-table";
  75
  76                                 fdt_setprop(blob, off, "cpu-release-addr",
  77                                                 &val, sizeof(val));
  78                         }
  79
  80                         fdt_setprop_string(blob, off, "enable-method",
  81                                                         enable_method);
  82                 } else {
  83                         printf ("cpu NULL\n");
  84                 }
  85                 off = fdt_node_offset_by_prop_value(blob, off,
  86                                 "device_type", "cpu", 4);
  87         }
  88
  89 #if defined(T1040_TDM_QUIRK_CCSR_BASE)
  90 #define CONFIG_MEM_HOLE_16M     0x1000000
  91         /*
  92          * Extract hwconfig from environment.
  93          * Search for tdm entry in hwconfig.
  94          */
  95         ret = getenv_f("hwconfig", buffer, sizeof(buffer));
  96         if (ret > 0)
  97                 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
  98
  99         /* Reserve the memory hole created by TDM LAW, so OSes dont use it */
 100         if (tdm_hwconfig_enabled) {
 101                 off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE,
 102                                       CONFIG_MEM_HOLE_16M);
 103                 if (off < 0)
 104                         printf("Failed  to reserve memory for tdm: %s\n",
 105                                fdt_strerror(off));
 106         }
 107 #endif
 108
 109         /* Reserve the boot page so OSes dont use it */
 110         if ((u64)bootpg < memory_limit) {
 111                 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
 112                 if (off < 0)
 113                         printf("Failed to reserve memory for bootpg: %s\n",
 114                                 fdt_strerror(off));
 115         }
 116
 117 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR
 118         /*
 119          * Reserve the default boot page so OSes dont use it.
 120          * The default boot page is always mapped to bootpg above using
 121          * boot page translation.
 122          */
 123         if (0xfffff000ull < memory_limit) {
 124                 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
 125                 if (off < 0) {
 126                         printf("Failed to reserve memory for 0xfffff000: %s\n",
 127                                 fdt_strerror(off));
 128                 }
 129         }
 130 #endif
 131
 132         /* Reserve spin table page */
 133         if (spin_tbl_addr < memory_limit) {
 134                 off = fdt_add_mem_rsv(blob,
 135                         (spin_tbl_addr & ~0xffful), 4096);
 136                 if (off < 0)
 137                         printf("Failed to reserve memory for spin table: %s\n",
 138                                 fdt_strerror(off));
 139         }
 140 #ifdef CONFIG_DEEP_SLEEP
 141 #ifdef CONFIG_SPL_MMC_BOOT
 142         off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START,
 143                 CONFIG_SYS_MMC_U_BOOT_SIZE);
 144         if (off < 0)
 145                 printf("Failed to reserve memory for SD deep sleep: %s\n",
 146                        fdt_strerror(off));
 147 #elif defined(CONFIG_SPL_SPI_BOOT)
 148         off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START,
 149                 CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE);
 150         if (off < 0)
 151                 printf("Failed to reserve memory for SPI deep sleep: %s\n",
 152                        fdt_strerror(off));
 153 #endif
 154 #endif
 155 }
 156 #endif
 157
 158 #ifdef CONFIG_SYS_FSL_CPC
 159 static inline void ft_fixup_l3cache(void *blob, int off)
 160 {
 161         u32 line_size, num_ways, size, num_sets;
 162         cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
 163         u32 cfg0 = in_be32(&cpc->cpccfg0);
 164
 165         size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
 166         num_ways = CPC_CFG0_NUM_WAYS(cfg0);
 167         line_size = CPC_CFG0_LINE_SZ(cfg0);
 168         num_sets = size / (line_size * num_ways);
 169
 170         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 171         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 172         fdt_setprop_cell(blob, off, "cache-size", size);
 173         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 174         fdt_setprop_cell(blob, off, "cache-level", 3);
 175 #ifdef CONFIG_SYS_CACHE_STASHING
 176         fdt_setprop_cell(blob, off, "cache-stash-id", 1);
 177 #endif
 178 }
 179 #else
 180 #define ft_fixup_l3cache(x, y)
 181 #endif
 182
 183 #if defined(CONFIG_L2_CACHE) || \
 184         defined(CONFIG_BACKSIDE_L2_CACHE) || \
 185         defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 186 static inline void ft_fixup_l2cache_compatible(void *blob, int off)
 187 {
 188         int len;
 189         struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
 190
 191         if (cpu) {
 192                 char buf[40];
 193
 194                 if (isdigit(cpu->name[0])) {
 195                         /* MPCxxxx, where xxxx == 4-digit number */
 196                         len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
 197                                 cpu->name) + 1;
 198                 } else {
 199                         /* Pxxxx or Txxxx, where xxxx == 4-digit number */
 200                         len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
 201                         tolower(cpu->name[0]), cpu->name + 1) + 1;
 202                 }
 203
 204                 /*
 205                  * append "cache" after the NULL character that the previous
 206                  * sprintf wrote.  This is how a device tree stores multiple
 207                  * strings in a property.
 208                  */
 209                 len += sprintf(buf + len, "cache") + 1;
 210
 211                 fdt_setprop(blob, off, "compatible", buf, len);
 212         }
 213 }
 214 #endif
 215
 216 #if defined(CONFIG_L2_CACHE)
 217 /* return size in kilobytes */
 218 static inline u32 l2cache_size(void)
 219 {
 220         volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 221         volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
 222         u32 ver = SVR_SOC_VER(get_svr());
 223
 224         switch (l2siz_field) {
 225         case 0x0:
 226                 break;
 227         case 0x1:
 228                 if (ver == SVR_8540 || ver == SVR_8560   ||
 229                     ver == SVR_8541 || ver == SVR_8555)
 230                         return 128;
 231                 else
 232                         return 256;
 233                 break;
 234         case 0x2:
 235                 if (ver == SVR_8540 || ver == SVR_8560   ||
 236                     ver == SVR_8541 || ver == SVR_8555)
 237                         return 256;
 238                 else
 239                         return 512;
 240                 break;
 241         case 0x3:
 242                 return 1024;
 243                 break;
 244         }
 245
 246         return 0;
 247 }
 248
 249 static inline void ft_fixup_l2cache(void *blob)
 250 {
 251         int off;
 252         u32 *ph;
 253
 254         const u32 line_size = 32;
 255         const u32 num_ways = 8;
 256         const u32 size = l2cache_size() * 1024;
 257         const u32 num_sets = size / (line_size * num_ways);
 258
 259         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 260         if (off < 0) {
 261                 debug("no cpu node fount\n");
 262                 return;
 263         }
 264
 265         ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 266
 267         if (ph == NULL) {
 268                 debug("no next-level-cache property\n");
 269                 return ;
 270         }
 271
 272         off = fdt_node_offset_by_phandle(blob, *ph);
 273         if (off < 0) {
 274                 printf("%s: %s\n", __func__, fdt_strerror(off));
 275                 return ;
 276         }
 277
 278         ft_fixup_l2cache_compatible(blob, off);
 279         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 280         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 281         fdt_setprop_cell(blob, off, "cache-size", size);
 282         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 283         fdt_setprop_cell(blob, off, "cache-level", 2);
 284
 285         /* we dont bother w/L3 since no platform of this type has one */
 286 }
 287 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
 288         defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 289 static inline void ft_fixup_l2cache(void *blob)
 290 {
 291         int off, l2_off, l3_off = -1;
 292         u32 *ph;
 293 #ifdef  CONFIG_BACKSIDE_L2_CACHE
 294         u32 l2cfg0 = mfspr(SPRN_L2CFG0);
 295 #else
 296         struct ccsr_cluster_l2 *l2cache =
 297                 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
 298         u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
 299 #endif
 300         u32 size, line_size, num_ways, num_sets;
 301         int has_l2 = 1;
 302
 303         /* P2040/P2040E has no L2, so dont set any L2 props */
 304         if (SVR_SOC_VER(get_svr()) == SVR_P2040)
 305                 has_l2 = 0;
 306
 307         size = (l2cfg0 & 0x3fff) * 64 * 1024;
 308         num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
 309         line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
 310         num_sets = size / (line_size * num_ways);
 311
 312         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 313
 314         while (off != -FDT_ERR_NOTFOUND) {
 315                 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 316
 317                 if (ph == NULL) {
 318                         debug("no next-level-cache property\n");
 319                         goto next;
 320                 }
 321
 322                 l2_off = fdt_node_offset_by_phandle(blob, *ph);
 323                 if (l2_off < 0) {
 324                         printf("%s: %s\n", __func__, fdt_strerror(off));
 325                         goto next;
 326                 }
 327
 328                 if (has_l2) {
 329 #ifdef CONFIG_SYS_CACHE_STASHING
 330                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 331 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 332                         /* Only initialize every eighth thread */
 333                         if (reg && !((*reg) % 8)) {
 334                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 335                                                  (*reg / 4) + 32 + 1);
 336                         }
 337 #else
 338                         if (reg) {
 339                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 340                                                  (*reg * 2) + 32 + 1);
 341                         }
 342 #endif
 343 #endif
 344
 345                         fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
 346                         fdt_setprop_cell(blob, l2_off, "cache-block-size",
 347                                                 line_size);
 348                         fdt_setprop_cell(blob, l2_off, "cache-size", size);
 349                         fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
 350                         fdt_setprop_cell(blob, l2_off, "cache-level", 2);
 351                         ft_fixup_l2cache_compatible(blob, l2_off);
 352                 }
 353
 354                 if (l3_off < 0) {
 355                         ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
 356
 357                         if (ph == NULL) {
 358                                 debug("no next-level-cache property\n");
 359                                 goto next;
 360                         }
 361                         l3_off = *ph;
 362                 }
 363 next:
 364                 off = fdt_node_offset_by_prop_value(blob, off,
 365                                 "device_type", "cpu", 4);
 366         }
 367         if (l3_off > 0) {
 368                 l3_off = fdt_node_offset_by_phandle(blob, l3_off);
 369                 if (l3_off < 0) {
 370                         printf("%s: %s\n", __func__, fdt_strerror(off));
 371                         return ;
 372                 }
 373                 ft_fixup_l3cache(blob, l3_off);
 374         }
 375 }
 376 #else
 377 #define ft_fixup_l2cache(x)
 378 #endif
 379
 380 static inline void ft_fixup_cache(void *blob)
 381 {
 382         int off;
 383
 384         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 385
 386         while (off != -FDT_ERR_NOTFOUND) {
 387                 u32 l1cfg0 = mfspr(SPRN_L1CFG0);
 388                 u32 l1cfg1 = mfspr(SPRN_L1CFG1);
 389                 u32 isize, iline_size, inum_sets, inum_ways;
 390                 u32 dsize, dline_size, dnum_sets, dnum_ways;
 391
 392                 /* d-side config */
 393                 dsize = (l1cfg0 & 0x7ff) * 1024;
 394                 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
 395                 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
 396                 dnum_sets = dsize / (dline_size * dnum_ways);
 397
 398                 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
 399                 fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 400                 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 401
 402 #ifdef CONFIG_SYS_CACHE_STASHING
 403                 {
 404                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 405                         if (reg)
 406                                 fdt_setprop_cell(blob, off, "cache-stash-id",
 407                                          (*reg * 2) + 32 + 0);
 408                 }
 409 #endif
 410
 411                 /* i-side config */
 412                 isize = (l1cfg1 & 0x7ff) * 1024;
 413                 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
 414                 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
 415                 inum_sets = isize / (iline_size * inum_ways);
 416
 417                 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
 418                 fdt_setprop_cell(blob, off, "i-cache-size", isize);
 419                 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 420
 421                 off = fdt_node_offset_by_prop_value(blob, off,
 422                                 "device_type", "cpu", 4);
 423         }
 424
 425         ft_fixup_l2cache(blob);
 426 }
 427
 428
 429 void fdt_add_enet_stashing(void *fdt)
 430 {
 431         do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
 432
 433         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
 434
 435         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
 436         do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
 437         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
 438         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
 439 }
 440
 441 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
 442 #ifdef CONFIG_SYS_DPAA_FMAN
 443 static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
 444                           unsigned long freq)
 445 {
 446         phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
 447         int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
 448
 449         if (off >= 0) {
 450                 off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
 451                 if (off > 0)
 452                         printf("WARNING enable to set clock-frequency "
 453                                 "for %s: %s\n", compat, fdt_strerror(off));
 454         }
 455 }
 456 #endif
 457
 458 static void ft_fixup_dpaa_clks(void *blob)
 459 {
 460         sys_info_t sysinfo;
 461
 462         get_sys_info(&sysinfo);
 463 #ifdef CONFIG_SYS_DPAA_FMAN
 464         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
 465                         sysinfo.freq_fman[0]);
 466
 467 #if (CONFIG_SYS_NUM_FMAN == 2)
 468         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
 469                         sysinfo.freq_fman[1]);
 470 #endif
 471 #endif
 472
 473 #ifdef CONFIG_SYS_DPAA_QBMAN
 474         do_fixup_by_compat_u32(blob, "fsl,qman",
 475                         "clock-frequency", sysinfo.freq_qman, 1);
 476 #endif
 477
 478 #ifdef CONFIG_SYS_DPAA_PME
 479         do_fixup_by_compat_u32(blob, "fsl,pme",
 480                 "clock-frequency", sysinfo.freq_pme, 1);
 481 #endif
 482 }
 483 #else
 484 #define ft_fixup_dpaa_clks(x)
 485 #endif
 486
 487 #ifdef CONFIG_QE
 488 static void ft_fixup_qe_snum(void *blob)
 489 {
 490         unsigned int svr;
 491
 492         svr = mfspr(SPRN_SVR);
 493         if (SVR_SOC_VER(svr) == SVR_8569) {
 494                 if(IS_SVR_REV(svr, 1, 0))
 495                         do_fixup_by_compat_u32(blob, "fsl,qe",
 496                                 "fsl,qe-num-snums", 46, 1);
 497                 else
 498                         do_fixup_by_compat_u32(blob, "fsl,qe",
 499                                 "fsl,qe-num-snums", 76, 1);
 500         }
 501 }
 502 #endif
 503
 504 #if defined(CONFIG_ARCH_P4080)
 505 static void fdt_fixup_usb(void *fdt)
 506 {
 507         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 508         u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
 509         int off;
 510
 511         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
 512         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
 513                                 FSL_CORENET_RCWSR11_EC1_FM1_USB1)
 514                 fdt_status_disabled(fdt, off);
 515
 516         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
 517         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
 518                                 FSL_CORENET_RCWSR11_EC2_USB2)
 519                 fdt_status_disabled(fdt, off);
 520 }
 521 #else
 522 #define fdt_fixup_usb(x)
 523 #endif
 524
 525 #if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \
 526         defined(CONFIG_ARCH_T4160)
 527 void fdt_fixup_dma3(void *blob)
 528 {
 529         /* the 3rd DMA is not functional if SRIO2 is chosen */
 530         int nodeoff;
 531         ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 532
 533 #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
 534 #if defined(CONFIG_ARCH_T2080)
 535         u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
 536                                     FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 537         srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 538
 539         switch (srds_prtcl_s2) {
 540         case 0x29:
 541         case 0x2d:
 542         case 0x2e:
 543 #elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
 544         u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
 545                                     FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
 546         srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
 547
 548         switch (srds_prtcl_s4) {
 549         case 6:
 550         case 8:
 551         case 14:
 552         case 16:
 553 #endif
 554                 nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma",
 555                                                         CONFIG_SYS_ELO3_DMA3);
 556                 if (nodeoff > 0)
 557                         fdt_status_disabled(blob, nodeoff);
 558                 else
 559                         printf("WARNING: unable to disable dma3\n");
 560                 break;
 561         default:
 562                 break;
 563         }
 564 }
 565 #else
 566 #define fdt_fixup_dma3(x)
 567 #endif
 568
 569 #if defined(CONFIG_ARCH_T1040)
 570 static void fdt_fixup_l2_switch(void *blob)
 571 {
 572         uchar l2swaddr[6];
 573         int node;
 574
 575         /* The l2switch node from device-tree has
 576          * compatible string "vitesse-9953" */
 577         node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
 578         if (node == -FDT_ERR_NOTFOUND)
 579                 /* no l2switch node has been found */
 580                 return;
 581
 582         /* Get MAC address for the l2switch from "l2switchaddr"*/
 583         if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) {
 584                 printf("Warning: MAC address for l2switch not found\n");
 585                 memset(l2swaddr, 0, sizeof(l2swaddr));
 586         }
 587
 588         /* Add MAC address to l2switch node */
 589         fdt_setprop(blob, node, "local-mac-address", l2swaddr,
 590                     sizeof(l2swaddr));
 591 }
 592 #else
 593 #define fdt_fixup_l2_switch(x)
 594 #endif
 595
 596 void ft_cpu_setup(void *blob, bd_t *bd)
 597 {
 598         int off;
 599         int val;
 600         int len;
 601         sys_info_t sysinfo;
 602
 603         /* delete crypto node if not on an E-processor */
 604         if (!IS_E_PROCESSOR(get_svr()))
 605                 fdt_fixup_crypto_node(blob, 0);
 606 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4
 607         else {
 608                 ccsr_sec_t __iomem *sec;
 609
 610                 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
 611                 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
 612         }
 613 #endif
 614
 615         fdt_fixup_ethernet(blob);
 616
 617         fdt_add_enet_stashing(blob);
 618
 619 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
 620 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1
 621 #endif
 622         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 623                 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
 624                 1);
 625         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 626                 "bus-frequency", bd->bi_busfreq, 1);
 627         get_sys_info(&sysinfo);
 628         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 629         while (off != -FDT_ERR_NOTFOUND) {
 630                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
 631                 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
 632                 fdt_setprop(blob, off, "clock-frequency", &val, 4);
 633                 off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 634                                                         "cpu", 4);
 635         }
 636         do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 637                 "bus-frequency", bd->bi_busfreq, 1);
 638
 639 #ifdef CONFIG_QE
 640         ft_qe_setup(blob);
 641         ft_fixup_qe_snum(blob);
 642 #endif
 643
 644 #ifdef CONFIG_SYS_DPAA_FMAN
 645         fdt_fixup_fman_firmware(blob);
 646 #endif
 647
 648 #ifdef CONFIG_SYS_NS16550
 649         do_fixup_by_compat_u32(blob, "ns16550",
 650                 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 651 #endif
 652
 653 #ifdef CONFIG_CPM2
 654         do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
 655                 "current-speed", gd->baudrate, 1);
 656
 657         do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
 658                 "clock-frequency", bd->bi_brgfreq, 1);
 659 #endif
 660
 661 #ifdef CONFIG_FSL_CORENET
 662         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
 663                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 664         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
 665                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 666         do_fixup_by_compat_u32(blob, "fsl,mpic",
 667                 "clock-frequency", get_bus_freq(0)/2, 1);
 668 #else
 669         do_fixup_by_compat_u32(blob, "fsl,mpic",
 670                 "clock-frequency", get_bus_freq(0), 1);
 671 #endif
 672
 673         fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 674
 675 #ifdef CONFIG_MP
 676         ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
 677         ft_fixup_num_cores(blob);
 678 #endif
 679
 680         ft_fixup_cache(blob);
 681
 682 #if defined(CONFIG_FSL_ESDHC)
 683         fdt_fixup_esdhc(blob, bd);
 684 #endif
 685
 686         ft_fixup_dpaa_clks(blob);
 687
 688 #if defined(CONFIG_SYS_BMAN_MEM_PHYS)
 689         fdt_portal(blob, "fsl,bman-portal", "bman-portals",
 690                         (u64)CONFIG_SYS_BMAN_MEM_PHYS,
 691                         CONFIG_SYS_BMAN_MEM_SIZE);
 692         fdt_fixup_bportals(blob);
 693 #endif
 694
 695 #if defined(CONFIG_SYS_QMAN_MEM_PHYS)
 696         fdt_portal(blob, "fsl,qman-portal", "qman-portals",
 697                         (u64)CONFIG_SYS_QMAN_MEM_PHYS,
 698                         CONFIG_SYS_QMAN_MEM_SIZE);
 699
 700         fdt_fixup_qportals(blob);
 701 #endif
 702
 703 #ifdef CONFIG_SYS_SRIO
 704         ft_srio_setup(blob);
 705 #endif
 706
 707         /*
 708          * system-clock = CCB clock/2
 709          * Here gd->bus_clk = CCB clock
 710          * We are using the system clock as 1588 Timer reference
 711          * clock source select
 712          */
 713         do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
 714                         "timer-frequency", gd->bus_clk/2, 1);
 715
 716         /*
 717          * clock-freq should change to clock-frequency and
 718          * flexcan-v1.0 should change to p1010-flexcan respectively
 719          * in the future.
 720          */
 721         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 722                         "clock_freq", gd->bus_clk/2, 1);
 723
 724         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 725                         "clock-frequency", gd->bus_clk/2, 1);
 726
 727         do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
 728                         "clock-frequency", gd->bus_clk/2, 1);
 729
 730         fdt_fixup_usb(blob);
 731
 732         fdt_fixup_l2_switch(blob);
 733
 734         fdt_fixup_dma3(blob);
 735 }
 736
 737 /*
 738  * For some CCSR devices, we only have the virtual address, not the physical
 739  * address.  This is because we map CCSR as a whole, so we typically don't need
 740  * a macro for the physical address of any device within CCSR.  In this case,
 741  * we calculate the physical address of that device using it's the difference
 742  * between the virtual address of the device and the virtual address of the
 743  * beginning of CCSR.
 744  */
 745 #define CCSR_VIRT_TO_PHYS(x) \
 746         (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
 747
 748 static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
 749 {
 750         printf("Warning: U-Boot configured %s at address %llx,\n"
 751                "but the device tree has it at %llx\n", name, uaddr, daddr);
 752 }
 753
 754 /*
 755  * Verify the device tree
 756  *
 757  * This function compares several CONFIG_xxx macros that contain physical
 758  * addresses with the corresponding nodes in the device tree, to see if
 759  * the physical addresses are all correct.  For example, if
 760  * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
 761  * of the first UART.  We convert this to a physical address and compare
 762  * that with the physical address of the first ns16550-compatible node
 763  * in the device tree.  If they don't match, then we display a warning.
 764  *
 765  * Returns 1 on success, 0 on failure
 766  */
 767 int ft_verify_fdt(void *fdt)
 768 {
 769         uint64_t addr = 0;
 770         int aliases;
 771         int off;
 772
 773         /* First check the CCSR base address */
 774         off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
 775         if (off > 0)
 776                 addr = fdt_get_base_address(fdt, off);
 777
 778         if (!addr) {
 779                 printf("Warning: could not determine base CCSR address in "
 780                        "device tree\n");
 781                 /* No point in checking anything else */
 782                 return 0;
 783         }
 784
 785         if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
 786                 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
 787                 /* No point in checking anything else */
 788                 return 0;
 789         }
 790
 791         /*
 792          * Check some nodes via aliases.  We assume that U-Boot and the device
 793          * tree enumerate the devices equally.  E.g. the first serial port in
 794          * U-Boot is the same as "serial0" in the device tree.
 795          */
 796         aliases = fdt_path_offset(fdt, "/aliases");
 797         if (aliases > 0) {
 798 #ifdef CONFIG_SYS_NS16550_COM1
 799                 if (!fdt_verify_alias_address(fdt, aliases, "serial0",
 800                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
 801                         return 0;
 802 #endif
 803
 804 #ifdef CONFIG_SYS_NS16550_COM2
 805                 if (!fdt_verify_alias_address(fdt, aliases, "serial1",
 806                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
 807                         return 0;
 808 #endif
 809         }
 810
 811         /*
 812          * The localbus node is typically a root node, even though the lbc
 813          * controller is part of CCSR.  If we were to put the lbc node under
 814          * the SOC node, then the 'ranges' property in the lbc node would
 815          * translate through the 'ranges' property of the parent SOC node, and
 816          * we don't want that.  Since it's a separate node, it's possible for
 817          * the 'reg' property to be wrong, so check it here.  For now, we
 818          * only check for "fsl,elbc" nodes.
 819          */
 820 #ifdef CONFIG_SYS_LBC_ADDR
 821         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
 822         if (off > 0) {
 823                 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
 824                 if (reg) {
 825                         uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
 826
 827                         addr = fdt_translate_address(fdt, off, reg);
 828                         if (uaddr != addr) {
 829                                 msg("the localbus", uaddr, addr);
 830                                 return 0;
 831                         }
 832                 }
 833         }
 834 #endif
 835
 836         return 1;
 837 }
 838
 839 void fdt_del_diu(void *blob)
 840 {
 841         int nodeoff = 0;
 842
 843         while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
 844                                 "fsl,diu")) >= 0) {
 845                 fdt_del_node(blob, nodeoff);
 846         }
 847 }