Merge tag 'u-boot-atmel-fixes-2020.07-a' of https://gitlab.denx.de/u-boot/custodians...
[oweals/u-boot.git] / arch / nds32 / cpu / n1213 / ag101 / timer.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2009 Faraday Technology
4  * Po-Yu Chuang <ratbert@faraday-tech.com>
5  *
6  * Copyright (C) 2011 Andes Technology Corporation
7  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
8  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
9  */
10 #ifndef CONFIG_TIMER
11 #include <common.h>
12 #include <init.h>
13 #include <irq_func.h>
14 #include <log.h>
15 #include <time.h>
16 #include <asm/io.h>
17 #include <faraday/fttmr010.h>
18 #include <linux/delay.h>
19
20 static ulong timestamp;
21 static ulong lastdec;
22
23 int timer_init(void)
24 {
25         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
26         unsigned int cr;
27
28         debug("%s()\n", __func__);
29
30         /* disable timers */
31         writel(0, &tmr->cr);
32
33 #ifdef CONFIG_FTTMR010_EXT_CLK
34         /* use 32768Hz oscillator for RTC, WDT, TIMER */
35         ftpmu010_32768osc_enable();
36 #endif
37
38         /* setup timer */
39         writel(TIMER_LOAD_VAL, &tmr->timer3_load);
40         writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
41         writel(0, &tmr->timer3_match1);
42         writel(0, &tmr->timer3_match2);
43
44         /* we don't want timer to issue interrupts */
45         writel(FTTMR010_TM3_MATCH1 |
46                FTTMR010_TM3_MATCH2 |
47                FTTMR010_TM3_OVERFLOW,
48                &tmr->interrupt_mask);
49
50         cr = readl(&tmr->cr);
51 #ifdef CONFIG_FTTMR010_EXT_CLK
52         cr |= FTTMR010_TM3_CLOCK;       /* use external clock */
53 #endif
54         cr |= FTTMR010_TM3_ENABLE;
55         writel(cr, &tmr->cr);
56
57         /* init the timestamp and lastdec value */
58         reset_timer_masked();
59
60         return 0;
61 }
62
63 /*
64  * timer without interrupts
65  */
66
67 /*
68  * reset time
69  */
70 void reset_timer_masked(void)
71 {
72         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
73
74         /* capure current decrementer value time */
75 #ifdef CONFIG_FTTMR010_EXT_CLK
76         lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
77 #else
78         lastdec = readl(&tmr->timer3_counter) /
79                         (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
80 #endif
81         timestamp = 0;          /* start "advancing" time stamp from 0 */
82
83         debug("%s(): lastdec = %lx\n", __func__, lastdec);
84 }
85
86 void reset_timer(void)
87 {
88         debug("%s()\n", __func__);
89         reset_timer_masked();
90 }
91
92 /*
93  * return timer ticks
94  */
95 ulong get_timer_masked(void)
96 {
97         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
98
99         /* current tick value */
100 #ifdef CONFIG_FTTMR010_EXT_CLK
101         ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
102 #else
103         ulong now = readl(&tmr->timer3_counter) /
104                         (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
105 #endif
106
107         debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
108
109         if (lastdec >= now) {
110                 /*
111                  * normal mode (non roll)
112                  * move stamp fordward with absoulte diff ticks
113                  */
114                 timestamp += lastdec - now;
115         } else {
116                 /*
117                  * we have overflow of the count down timer
118                  *
119                  * nts = ts + ld + (TLV - now)
120                  * ts=old stamp, ld=time that passed before passing through -1
121                  * (TLV-now) amount of time after passing though -1
122                  * nts = new "advancing time stamp"...it could also roll and
123                  * cause problems.
124                  */
125                 timestamp += lastdec + TIMER_LOAD_VAL - now;
126         }
127
128         lastdec = now;
129
130         debug("%s() returns %lx\n", __func__, timestamp);
131
132         return timestamp;
133 }
134
135 /*
136  * return difference between timer ticks and base
137  */
138 ulong get_timer(ulong base)
139 {
140         debug("%s(%lx)\n", __func__, base);
141         return get_timer_masked() - base;
142 }
143
144 void set_timer(ulong t)
145 {
146         debug("%s(%lx)\n", __func__, t);
147         timestamp = t;
148 }
149
150 /* delay x useconds AND preserve advance timestamp value */
151 void __udelay(unsigned long usec)
152 {
153         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
154
155 #ifdef CONFIG_FTTMR010_EXT_CLK
156         long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
157 #else
158         long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
159 #endif
160         unsigned long now, last = readl(&tmr->timer3_counter);
161
162         debug("%s(%lu)\n", __func__, usec);
163         while (tmo > 0) {
164                 now = readl(&tmr->timer3_counter);
165                 if (now > last) /* count down timer overflow */
166                         tmo -= TIMER_LOAD_VAL + last - now;
167                 else
168                         tmo -= last - now;
169                 last = now;
170         }
171 }
172
173 /*
174  * This function is derived from PowerPC code (read timebase as long long).
175  * On ARM it just returns the timer value.
176  */
177 unsigned long long get_ticks(void)
178 {
179         debug("%s()\n", __func__);
180         return get_timer(0);
181 }
182
183 /*
184  * This function is derived from PowerPC code (timebase clock frequency).
185  * On ARM it returns the number of timer ticks per second.
186  */
187 ulong get_tbclk(void)
188 {
189         debug("%s()\n", __func__);
190 #ifdef CONFIG_FTTMR010_EXT_CLK
191         return CONFIG_SYS_HZ;
192 #else
193         return CONFIG_SYS_CLK_FREQ;
194 #endif
195 }
196 #endif /* CONFIG_TIMER */