arch/arm/mach-imx/mx6/clock.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   4  */
   5
   6 #include <common.h>
   7 #include <command.h>
   8 #include <div64.h>
   9 #include <asm/io.h>
  10 #include <linux/errno.h>
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/arch/crm_regs.h>
  13 #include <asm/arch/clock.h>
  14 #include <asm/arch/sys_proto.h>
  15
  16 enum pll_clocks {
  17         PLL_SYS,        /* System PLL */
  18         PLL_BUS,        /* System Bus PLL*/
  19         PLL_USBOTG,     /* OTG USB PLL */
  20         PLL_ENET,       /* ENET PLL */
  21         PLL_AUDIO,      /* AUDIO PLL */
  22         PLL_VIDEO,      /* VIDEO PLL */
  23 };
  24
  25 struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
  26
  27 #ifdef CONFIG_MXC_OCOTP
  28 void enable_ocotp_clk(unsigned char enable)
  29 {
  30         u32 reg;
  31
  32         reg = __raw_readl(&imx_ccm->CCGR2);
  33         if (enable)
  34                 reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
  35         else
  36                 reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
  37         __raw_writel(reg, &imx_ccm->CCGR2);
  38 }
  39 #endif
  40
  41 #ifdef CONFIG_NAND_MXS
  42 void setup_gpmi_io_clk(u32 cfg)
  43 {
  44         /* Disable clocks per ERR007177 from MX6 errata */
  45         clrbits_le32(&imx_ccm->CCGR4,
  46                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  47                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  48                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  49                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
  50                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
  51
  52 #if defined(CONFIG_MX6SX)
  53         clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
  54
  55         clrsetbits_le32(&imx_ccm->cs2cdr,
  56                         MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
  57                         MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
  58                         MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK,
  59                         cfg);
  60
  61         setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
  62 #else
  63         clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
  64
  65         clrsetbits_le32(&imx_ccm->cs2cdr,
  66                         MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
  67                         MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
  68                         MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
  69                         cfg);
  70
  71         setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
  72 #endif
  73         setbits_le32(&imx_ccm->CCGR4,
  74                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  75                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  76                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  77                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
  78                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
  79 }
  80 #endif
  81
  82 void enable_usboh3_clk(unsigned char enable)
  83 {
  84         u32 reg;
  85
  86         reg = __raw_readl(&imx_ccm->CCGR6);
  87         if (enable)
  88                 reg |= MXC_CCM_CCGR6_USBOH3_MASK;
  89         else
  90                 reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK);
  91         __raw_writel(reg, &imx_ccm->CCGR6);
  92
  93 }
  94
  95 #if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
  96 void enable_enet_clk(unsigned char enable)
  97 {
  98         u32 mask, *addr;
  99
 100         if (is_mx6ull()) {
 101                 mask = MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK;
 102                 addr = &imx_ccm->CCGR0;
 103         } else if (is_mx6ul()) {
 104                 mask = MXC_CCM_CCGR3_ENET_MASK;
 105                 addr = &imx_ccm->CCGR3;
 106         } else {
 107                 mask = MXC_CCM_CCGR1_ENET_MASK;
 108                 addr = &imx_ccm->CCGR1;
 109         }
 110
 111         if (enable)
 112                 setbits_le32(addr, mask);
 113         else
 114                 clrbits_le32(addr, mask);
 115 }
 116 #endif
 117
 118 #ifdef CONFIG_MXC_UART
 119 void enable_uart_clk(unsigned char enable)
 120 {
 121         u32 mask;
 122
 123         if (is_mx6ul() || is_mx6ull())
 124                 mask = MXC_CCM_CCGR5_UART_MASK;
 125         else
 126                 mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
 127
 128         if (enable)
 129                 setbits_le32(&imx_ccm->CCGR5, mask);
 130         else
 131                 clrbits_le32(&imx_ccm->CCGR5, mask);
 132 }
 133 #endif
 134
 135 #ifdef CONFIG_MMC
 136 int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
 137 {
 138         u32 mask;
 139
 140         if (bus_num > 3)
 141                 return -EINVAL;
 142
 143         mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2);
 144         if (enable)
 145                 setbits_le32(&imx_ccm->CCGR6, mask);
 146         else
 147                 clrbits_le32(&imx_ccm->CCGR6, mask);
 148
 149         return 0;
 150 }
 151 #endif
 152
 153 #ifdef CONFIG_SYS_I2C_MXC
 154 /* i2c_num can be from 0 - 3 */
 155 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 156 {
 157         u32 reg;
 158         u32 mask;
 159         u32 *addr;
 160
 161         if (i2c_num > 3)
 162                 return -EINVAL;
 163         if (i2c_num < 3) {
 164                 mask = MXC_CCM_CCGR_CG_MASK
 165                         << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
 166                         + (i2c_num << 1));
 167                 reg = __raw_readl(&imx_ccm->CCGR2);
 168                 if (enable)
 169                         reg |= mask;
 170                 else
 171                         reg &= ~mask;
 172                 __raw_writel(reg, &imx_ccm->CCGR2);
 173         } else {
 174                 if (is_mx6sll())
 175                         return -EINVAL;
 176                 if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
 177                         mask = MXC_CCM_CCGR6_I2C4_MASK;
 178                         addr = &imx_ccm->CCGR6;
 179                 } else {
 180                         mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK;
 181                         addr = &imx_ccm->CCGR1;
 182                 }
 183                 reg = __raw_readl(addr);
 184                 if (enable)
 185                         reg |= mask;
 186                 else
 187                         reg &= ~mask;
 188                 __raw_writel(reg, addr);
 189         }
 190         return 0;
 191 }
 192 #endif
 193
 194 /* spi_num can be from 0 - SPI_MAX_NUM */
 195 int enable_spi_clk(unsigned char enable, unsigned spi_num)
 196 {
 197         u32 reg;
 198         u32 mask;
 199
 200         if (spi_num > SPI_MAX_NUM)
 201                 return -EINVAL;
 202
 203         mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1);
 204         reg = __raw_readl(&imx_ccm->CCGR1);
 205         if (enable)
 206                 reg |= mask;
 207         else
 208                 reg &= ~mask;
 209         __raw_writel(reg, &imx_ccm->CCGR1);
 210         return 0;
 211 }
 212 static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 213 {
 214         u32 div, test_div, pll_num, pll_denom;
 215
 216         switch (pll) {
 217         case PLL_SYS:
 218                 div = __raw_readl(&imx_ccm->analog_pll_sys);
 219                 div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
 220
 221                 return (infreq * div) >> 1;
 222         case PLL_BUS:
 223                 div = __raw_readl(&imx_ccm->analog_pll_528);
 224                 div &= BM_ANADIG_PLL_528_DIV_SELECT;
 225
 226                 return infreq * (20 + (div << 1));
 227         case PLL_USBOTG:
 228                 div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl);
 229                 div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;
 230
 231                 return infreq * (20 + (div << 1));
 232         case PLL_ENET:
 233                 div = __raw_readl(&imx_ccm->analog_pll_enet);
 234                 div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
 235
 236                 return 25000000 * (div + (div >> 1) + 1);
 237         case PLL_AUDIO:
 238                 div = __raw_readl(&imx_ccm->analog_pll_audio);
 239                 if (!(div & BM_ANADIG_PLL_AUDIO_ENABLE))
 240                         return 0;
 241                 /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
 242                 if (div & BM_ANADIG_PLL_AUDIO_BYPASS)
 243                         return MXC_HCLK;
 244                 pll_num = __raw_readl(&imx_ccm->analog_pll_audio_num);
 245                 pll_denom = __raw_readl(&imx_ccm->analog_pll_audio_denom);
 246                 test_div = (div & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT) >>
 247                         BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT;
 248                 div &= BM_ANADIG_PLL_AUDIO_DIV_SELECT;
 249                 if (test_div == 3) {
 250                         debug("Error test_div\n");
 251                         return 0;
 252                 }
 253                 test_div = 1 << (2 - test_div);
 254
 255                 return infreq * (div + pll_num / pll_denom) / test_div;
 256         case PLL_VIDEO:
 257                 div = __raw_readl(&imx_ccm->analog_pll_video);
 258                 if (!(div & BM_ANADIG_PLL_VIDEO_ENABLE))
 259                         return 0;
 260                 /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
 261                 if (div & BM_ANADIG_PLL_VIDEO_BYPASS)
 262                         return MXC_HCLK;
 263                 pll_num = __raw_readl(&imx_ccm->analog_pll_video_num);
 264                 pll_denom = __raw_readl(&imx_ccm->analog_pll_video_denom);
 265                 test_div = (div & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) >>
 266                         BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
 267                 div &= BM_ANADIG_PLL_VIDEO_DIV_SELECT;
 268                 if (test_div == 3) {
 269                         debug("Error test_div\n");
 270                         return 0;
 271                 }
 272                 test_div = 1 << (2 - test_div);
 273
 274                 return infreq * (div + pll_num / pll_denom) / test_div;
 275         default:
 276                 return 0;
 277         }
 278         /* NOTREACHED */
 279 }
 280 static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
 281 {
 282         u32 div;
 283         u64 freq;
 284
 285         switch (pll) {
 286         case PLL_BUS:
 287                 if (!is_mx6ul() && !is_mx6ull()) {
 288                         if (pfd_num == 3) {
 289                                 /* No PFD3 on PLL2 */
 290                                 return 0;
 291                         }
 292                 }
 293                 div = __raw_readl(&imx_ccm->analog_pfd_528);
 294                 freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
 295                 break;
 296         case PLL_USBOTG:
 297                 div = __raw_readl(&imx_ccm->analog_pfd_480);
 298                 freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
 299                 break;
 300         default:
 301                 /* No PFD on other PLL                                       */
 302                 return 0;
 303         }
 304
 305         return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
 306                               ANATOP_PFD_FRAC_SHIFT(pfd_num));
 307 }
 308
 309 static u32 get_mcu_main_clk(void)
 310 {
 311         u32 reg, freq;
 312
 313         reg = __raw_readl(&imx_ccm->cacrr);
 314         reg &= MXC_CCM_CACRR_ARM_PODF_MASK;
 315         reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET;
 316         freq = decode_pll(PLL_SYS, MXC_HCLK);
 317
 318         return freq / (reg + 1);
 319 }
 320
 321 u32 get_periph_clk(void)
 322 {
 323         u32 reg, div = 0, freq = 0;
 324
 325         reg = __raw_readl(&imx_ccm->cbcdr);
 326         if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
 327                 div = (reg & MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >>
 328                        MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET;
 329                 reg = __raw_readl(&imx_ccm->cbcmr);
 330                 reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
 331                 reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;
 332
 333                 switch (reg) {
 334                 case 0:
 335                         freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 336                         break;
 337                 case 1:
 338                 case 2:
 339                         freq = MXC_HCLK;
 340                         break;
 341                 default:
 342                         break;
 343                 }
 344         } else {
 345                 reg = __raw_readl(&imx_ccm->cbcmr);
 346                 reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK;
 347                 reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET;
 348
 349                 switch (reg) {
 350                 case 0:
 351                         freq = decode_pll(PLL_BUS, MXC_HCLK);
 352                         break;
 353                 case 1:
 354                         freq = mxc_get_pll_pfd(PLL_BUS, 2);
 355                         break;
 356                 case 2:
 357                         freq = mxc_get_pll_pfd(PLL_BUS, 0);
 358                         break;
 359                 case 3:
 360                         /* static / 2 divider */
 361                         freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
 362                         break;
 363                 default:
 364                         break;
 365                 }
 366         }
 367
 368         return freq / (div + 1);
 369 }
 370
 371 static u32 get_ipg_clk(void)
 372 {
 373         u32 reg, ipg_podf;
 374
 375         reg = __raw_readl(&imx_ccm->cbcdr);
 376         reg &= MXC_CCM_CBCDR_IPG_PODF_MASK;
 377         ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET;
 378
 379         return get_ahb_clk() / (ipg_podf + 1);
 380 }
 381
 382 static u32 get_ipg_per_clk(void)
 383 {
 384         u32 reg, perclk_podf;
 385
 386         reg = __raw_readl(&imx_ccm->cscmr1);
 387         if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
 388             is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
 389                 if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
 390                         return MXC_HCLK; /* OSC 24Mhz */
 391         }
 392
 393         perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
 394
 395         return get_ipg_clk() / (perclk_podf + 1);
 396 }
 397
 398 static u32 get_uart_clk(void)
 399 {
 400         u32 reg, uart_podf;
 401         u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
 402         reg = __raw_readl(&imx_ccm->cscdr1);
 403
 404         if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
 405             is_mx6sll() || is_mx6ull()) {
 406                 if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
 407                         freq = MXC_HCLK;
 408         }
 409
 410         reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
 411         uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
 412
 413         return freq / (uart_podf + 1);
 414 }
 415
 416 static u32 get_cspi_clk(void)
 417 {
 418         u32 reg, cspi_podf;
 419
 420         reg = __raw_readl(&imx_ccm->cscdr2);
 421         cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
 422                      MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 423
 424         if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
 425             is_mx6sll() || is_mx6ull()) {
 426                 if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
 427                         return MXC_HCLK / (cspi_podf + 1);
 428         }
 429
 430         return  decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
 431 }
 432
 433 static u32 get_axi_clk(void)
 434 {
 435         u32 root_freq, axi_podf;
 436         u32 cbcdr =  __raw_readl(&imx_ccm->cbcdr);
 437
 438         axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK;
 439         axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET;
 440
 441         if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
 442                 if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
 443                         root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
 444                 else
 445                         root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
 446         } else
 447                 root_freq = get_periph_clk();
 448
 449         return  root_freq / (axi_podf + 1);
 450 }
 451
 452 static u32 get_emi_slow_clk(void)
 453 {
 454         u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;
 455
 456         cscmr1 =  __raw_readl(&imx_ccm->cscmr1);
 457         emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
 458         emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
 459         emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
 460         emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;
 461
 462         switch (emi_clk_sel) {
 463         case 0:
 464                 root_freq = get_axi_clk();
 465                 break;
 466         case 1:
 467                 root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 468                 break;
 469         case 2:
 470                 root_freq =  mxc_get_pll_pfd(PLL_BUS, 2);
 471                 break;
 472         case 3:
 473                 root_freq =  mxc_get_pll_pfd(PLL_BUS, 0);
 474                 break;
 475         }
 476
 477         return root_freq / (emi_slow_podf + 1);
 478 }
 479
 480 static u32 get_mmdc_ch0_clk(void)
 481 {
 482         u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
 483         u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
 484
 485         u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
 486
 487         if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
 488             is_mx6sll()) {
 489                 podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
 490                         MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
 491                 if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
 492                         per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
 493                                 MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
 494                         if (is_mx6sl()) {
 495                                 if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
 496                                         freq = MXC_HCLK;
 497                                 else
 498                                         freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 499                         } else {
 500                                 if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
 501                                         freq = decode_pll(PLL_BUS, MXC_HCLK);
 502                                 else
 503                                         freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 504                         }
 505                 } else {
 506                         per2_clk2_podf = 0;
 507                         switch ((cbcmr &
 508                                 MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
 509                                 MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
 510                         case 0:
 511                                 freq = decode_pll(PLL_BUS, MXC_HCLK);
 512                                 break;
 513                         case 1:
 514                                 freq = mxc_get_pll_pfd(PLL_BUS, 2);
 515                                 break;
 516                         case 2:
 517                                 freq = mxc_get_pll_pfd(PLL_BUS, 0);
 518                                 break;
 519                         case 3:
 520                                 if (is_mx6sl()) {
 521                                         freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
 522                                         break;
 523                                 }
 524
 525                                 pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
 526                                 switch (pmu_misc2_audio_div) {
 527                                 case 0:
 528                                 case 2:
 529                                         pmu_misc2_audio_div = 1;
 530                                         break;
 531                                 case 1:
 532                                         pmu_misc2_audio_div = 2;
 533                                         break;
 534                                 case 3:
 535                                         pmu_misc2_audio_div = 4;
 536                                         break;
 537                                 }
 538                                 freq = decode_pll(PLL_AUDIO, MXC_HCLK) /
 539                                         pmu_misc2_audio_div;
 540                                 break;
 541                         }
 542                 }
 543                 return freq / (podf + 1) / (per2_clk2_podf + 1);
 544         } else {
 545                 podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
 546                         MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
 547                 return get_periph_clk() / (podf + 1);
 548         }
 549 }
 550
 551 #if defined(CONFIG_VIDEO_MXS)
 552 static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom,
 553                             u32 post_div)
 554 {
 555         u32 reg = 0;
 556         ulong start;
 557
 558         debug("pll5 div = %d, num = %d, denom = %d\n",
 559               pll_div, pll_num, pll_denom);
 560
 561         /* Power up PLL5 video */
 562         writel(BM_ANADIG_PLL_VIDEO_POWERDOWN |
 563                BM_ANADIG_PLL_VIDEO_BYPASS |
 564                BM_ANADIG_PLL_VIDEO_DIV_SELECT |
 565                BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
 566                &imx_ccm->analog_pll_video_clr);
 567
 568         /* Set div, num and denom */
 569         switch (post_div) {
 570         case 1:
 571                 writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
 572                        BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2),
 573                        &imx_ccm->analog_pll_video_set);
 574                 break;
 575         case 2:
 576                 writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
 577                        BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1),
 578                        &imx_ccm->analog_pll_video_set);
 579                 break;
 580         case 4:
 581                 writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
 582                        BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0),
 583                        &imx_ccm->analog_pll_video_set);
 584                 break;
 585         default:
 586                 puts("Wrong test_div!\n");
 587                 return -EINVAL;
 588         }
 589
 590         writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num),
 591                &imx_ccm->analog_pll_video_num);
 592         writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom),
 593                &imx_ccm->analog_pll_video_denom);
 594
 595         /* Wait PLL5 lock */
 596         start = get_timer(0);   /* Get current timestamp */
 597
 598         do {
 599                 reg = readl(&imx_ccm->analog_pll_video);
 600                 if (reg & BM_ANADIG_PLL_VIDEO_LOCK) {
 601                         /* Enable PLL out */
 602                         writel(BM_ANADIG_PLL_VIDEO_ENABLE,
 603                                &imx_ccm->analog_pll_video_set);
 604                         return 0;
 605                 }
 606         } while (get_timer(0) < (start + 10)); /* Wait 10ms */
 607
 608         puts("Lock PLL5 timeout\n");
 609
 610         return -ETIME;
 611 }
 612
 613 /*
 614  * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD
 615  *
 616  * 'freq' using KHz as unit, see driver/video/mxsfb.c.
 617  */
 618 void mxs_set_lcdclk(u32 base_addr, u32 freq)
 619 {
 620         u32 reg = 0;
 621         u32 hck = MXC_HCLK / 1000;
 622         /* DIV_SELECT ranges from 27 to 54 */
 623         u32 min = hck * 27;
 624         u32 max = hck * 54;
 625         u32 temp, best = 0;
 626         u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1;
 627         u32 pll_div, pll_num, pll_denom, post_div = 1;
 628
 629         debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
 630
 631         if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
 632             !is_mx6sll()) {
 633                 debug("This chip not support lcd!\n");
 634                 return;
 635         }
 636
 637         if (!is_mx6sl()) {
 638                 if (base_addr == LCDIF1_BASE_ADDR) {
 639                         reg = readl(&imx_ccm->cscdr2);
 640                         /* Can't change clocks when clock not from pre-mux */
 641                         if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
 642                                 return;
 643                 }
 644         }
 645
 646         if (is_mx6sx()) {
 647                 reg = readl(&imx_ccm->cscdr2);
 648                 /* Can't change clocks when clock not from pre-mux */
 649                 if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
 650                         return;
 651         }
 652
 653         temp = freq * max_pred * max_postd;
 654         if (temp < min) {
 655                 /*
 656                  * Register: PLL_VIDEO
 657                  * Bit Field: POST_DIV_SELECT
 658                  * 00 — Divide by 4.
 659                  * 01 — Divide by 2.
 660                  * 10 — Divide by 1.
 661                  * 11 — Reserved
 662                  * No need to check post_div(1)
 663                  */
 664                 for (post_div = 2; post_div <= 4; post_div <<= 1) {
 665                         if ((temp * post_div) > min) {
 666                                 freq *= post_div;
 667                                 break;
 668                         }
 669                 }
 670
 671                 if (post_div > 4) {
 672                         printf("Fail to set rate to %dkhz", freq);
 673                         return;
 674                 }
 675         }
 676
 677         /* Choose the best pred and postd to match freq for lcd */
 678         for (i = 1; i <= max_pred; i++) {
 679                 for (j = 1; j <= max_postd; j++) {
 680                         temp = freq * i * j;
 681                         if (temp > max || temp < min)
 682                                 continue;
 683                         if (best == 0 || temp < best) {
 684                                 best = temp;
 685                                 pred = i;
 686                                 postd = j;
 687                         }
 688                 }
 689         }
 690
 691         if (best == 0) {
 692                 printf("Fail to set rate to %dKHz", freq);
 693                 return;
 694         }
 695
 696         debug("best %d, pred = %d, postd = %d\n", best, pred, postd);
 697
 698         pll_div = best / hck;
 699         pll_denom = 1000000;
 700         pll_num = (best - hck * pll_div) * pll_denom / hck;
 701
 702         /*
 703          *                                  pll_num
 704          *             (24MHz * (pll_div + --------- ))
 705          *                                 pll_denom
 706          *freq KHz =  --------------------------------
 707          *             post_div * pred * postd * 1000
 708          */
 709
 710         if (base_addr == LCDIF1_BASE_ADDR) {
 711                 if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 712                         return;
 713
 714                 enable_lcdif_clock(base_addr, 0);
 715                 if (!is_mx6sl()) {
 716                         /* Select pre-lcd clock to PLL5 and set pre divider */
 717                         clrsetbits_le32(&imx_ccm->cscdr2,
 718                                         MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
 719                                         MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
 720                                         (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
 721                                         ((pred - 1) <<
 722                                          MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
 723
 724                         /* Set the post divider */
 725                         clrsetbits_le32(&imx_ccm->cbcmr,
 726                                         MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
 727                                         ((postd - 1) <<
 728                                         MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
 729                 } else {
 730                         /* Select pre-lcd clock to PLL5 and set pre divider */
 731                         clrsetbits_le32(&imx_ccm->cscdr2,
 732                                         MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
 733                                         MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
 734                                         (0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
 735                                         ((pred - 1) <<
 736                                          MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));
 737
 738                         /* Set the post divider */
 739                         clrsetbits_le32(&imx_ccm->cscmr1,
 740                                         MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
 741                                         (((postd - 1)^0x6) <<
 742                                          MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
 743                 }
 744
 745                 enable_lcdif_clock(base_addr, 1);
 746         } else if (is_mx6sx()) {
 747                 /* Setting LCDIF2 for i.MX6SX */
 748                 if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 749                         return;
 750
 751                 enable_lcdif_clock(base_addr, 0);
 752                 /* Select pre-lcd clock to PLL5 and set pre divider */
 753                 clrsetbits_le32(&imx_ccm->cscdr2,
 754                                 MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
 755                                 MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK,
 756                                 (0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) |
 757                                 ((pred - 1) <<
 758                                  MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET));
 759
 760                 /* Set the post divider */
 761                 clrsetbits_le32(&imx_ccm->cscmr1,
 762                                 MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
 763                                 ((postd - 1) <<
 764                                  MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));
 765
 766                 enable_lcdif_clock(base_addr, 1);
 767         }
 768 }
 769
 770 int enable_lcdif_clock(u32 base_addr, bool enable)
 771 {
 772         u32 reg = 0;
 773         u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
 774
 775         if (is_mx6sx()) {
 776                 if ((base_addr != LCDIF1_BASE_ADDR) &&
 777                     (base_addr != LCDIF2_BASE_ADDR)) {
 778                         puts("Wrong LCD interface!\n");
 779                         return -EINVAL;
 780                 }
 781                 /* Set to pre-mux clock at default */
 782                 lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ?
 783                         MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK :
 784                         MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
 785                 lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ?
 786                         (MXC_CCM_CCGR3_LCDIF2_PIX_MASK |
 787                          MXC_CCM_CCGR3_DISP_AXI_MASK) :
 788                         (MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
 789                          MXC_CCM_CCGR3_DISP_AXI_MASK);
 790         } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
 791                 if (base_addr != LCDIF1_BASE_ADDR) {
 792                         puts("Wrong LCD interface!\n");
 793                         return -EINVAL;
 794                 }
 795                 /* Set to pre-mux clock at default */
 796                 lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
 797                 lcdif_ccgr3_mask =  MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
 798         } else if (is_mx6sl()) {
 799                 if (base_addr != LCDIF1_BASE_ADDR) {
 800                         puts("Wrong LCD interface!\n");
 801                         return -EINVAL;
 802                 }
 803
 804                 reg = readl(&imx_ccm->CCGR3);
 805                 reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
 806                          MXC_CCM_CCGR3_LCDIF_PIX_MASK);
 807                 writel(reg, &imx_ccm->CCGR3);
 808
 809                 if (enable) {
 810                         reg = readl(&imx_ccm->cscdr3);
 811                         reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
 812                         reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
 813                         writel(reg, &imx_ccm->cscdr3);
 814
 815                         reg = readl(&imx_ccm->CCGR3);
 816                         reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
 817                                 MXC_CCM_CCGR3_LCDIF_PIX_MASK;
 818                         writel(reg, &imx_ccm->CCGR3);
 819                 }
 820
 821                 return 0;
 822         } else {
 823                 return 0;
 824         }
 825
 826         /* Gate LCDIF clock first */
 827         reg = readl(&imx_ccm->CCGR3);
 828         reg &= ~lcdif_ccgr3_mask;
 829         writel(reg, &imx_ccm->CCGR3);
 830
 831         reg = readl(&imx_ccm->CCGR2);
 832         reg &= ~MXC_CCM_CCGR2_LCD_MASK;
 833         writel(reg, &imx_ccm->CCGR2);
 834
 835         if (enable) {
 836                 /* Select pre-mux */
 837                 reg = readl(&imx_ccm->cscdr2);
 838                 reg &= ~lcdif_clk_sel_mask;
 839                 writel(reg, &imx_ccm->cscdr2);
 840
 841                 /* Enable the LCDIF pix clock */
 842                 reg = readl(&imx_ccm->CCGR3);
 843                 reg |= lcdif_ccgr3_mask;
 844                 writel(reg, &imx_ccm->CCGR3);
 845
 846                 reg = readl(&imx_ccm->CCGR2);
 847                 reg |= MXC_CCM_CCGR2_LCD_MASK;
 848                 writel(reg, &imx_ccm->CCGR2);
 849         }
 850
 851         return 0;
 852 }
 853 #endif
 854
 855 #ifdef CONFIG_FSL_QSPI
 856 /* qspi_num can be from 0 - 1 */
 857 void enable_qspi_clk(int qspi_num)
 858 {
 859         u32 reg = 0;
 860         /* Enable QuadSPI clock */
 861         switch (qspi_num) {
 862         case 0:
 863                 /* disable the clock gate */
 864                 clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
 865
 866                 /* set 50M  : (50 = 396 / 2 / 4) */
 867                 reg = readl(&imx_ccm->cscmr1);
 868                 reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK |
 869                          MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK);
 870                 reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) |
 871                         (2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET));
 872                 writel(reg, &imx_ccm->cscmr1);
 873
 874                 /* enable the clock gate */
 875                 setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
 876                 break;
 877         case 1:
 878                 /*
 879                  * disable the clock gate
 880                  * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate,
 881                  * disable both of them.
 882                  */
 883                 clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
 884                              MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
 885
 886                 /* set 50M  : (50 = 396 / 2 / 4) */
 887                 reg = readl(&imx_ccm->cs2cdr);
 888                 reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
 889                          MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
 890                          MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK);
 891                 reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) |
 892                         MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3));
 893                 writel(reg, &imx_ccm->cs2cdr);
 894
 895                 /*enable the clock gate*/
 896                 setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
 897                              MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
 898                 break;
 899         default:
 900                 break;
 901         }
 902 }
 903 #endif
 904
 905 #ifdef CONFIG_FEC_MXC
 906 int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
 907 {
 908         u32 reg = 0;
 909         s32 timeout = 100000;
 910
 911         struct anatop_regs __iomem *anatop =
 912                 (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
 913
 914         if (freq < ENET_25MHZ || freq > ENET_125MHZ)
 915                 return -EINVAL;
 916
 917         reg = readl(&anatop->pll_enet);
 918
 919         if (fec_id == 0) {
 920                 reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
 921                 reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
 922         } else if (fec_id == 1) {
 923                 /* Only i.MX6SX/UL support ENET2 */
 924                 if (!(is_mx6sx() || is_mx6ul() || is_mx6ull()))
 925                         return -EINVAL;
 926                 reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
 927                 reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
 928         } else {
 929                 return -EINVAL;
 930         }
 931
 932         if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
 933             (!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
 934                 reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
 935                 writel(reg, &anatop->pll_enet);
 936                 while (timeout--) {
 937                         if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
 938                                 break;
 939                 }
 940                 if (timeout < 0)
 941                         return -ETIMEDOUT;
 942         }
 943
 944         /* Enable FEC clock */
 945         if (fec_id == 0)
 946                 reg |= BM_ANADIG_PLL_ENET_ENABLE;
 947         else
 948                 reg |= BM_ANADIG_PLL_ENET2_ENABLE;
 949         reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
 950         writel(reg, &anatop->pll_enet);
 951
 952 #ifdef CONFIG_MX6SX
 953         /* Disable enet system clcok before switching clock parent */
 954         reg = readl(&imx_ccm->CCGR3);
 955         reg &= ~MXC_CCM_CCGR3_ENET_MASK;
 956         writel(reg, &imx_ccm->CCGR3);
 957
 958         /*
 959          * Set enet ahb clock to 200MHz
 960          * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
 961          */
 962         reg = readl(&imx_ccm->chsccdr);
 963         reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK
 964                  | MXC_CCM_CHSCCDR_ENET_PODF_MASK
 965                  | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK);
 966         /* PLL2 PFD2 */
 967         reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET);
 968         /* Div = 2*/
 969         reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET);
 970         reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET);
 971         writel(reg, &imx_ccm->chsccdr);
 972
 973         /* Enable enet system clock */
 974         reg = readl(&imx_ccm->CCGR3);
 975         reg |= MXC_CCM_CCGR3_ENET_MASK;
 976         writel(reg, &imx_ccm->CCGR3);
 977 #endif
 978         return 0;
 979 }
 980 #endif
 981
 982 static u32 get_usdhc_clk(u32 port)
 983 {
 984         u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
 985         u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
 986         u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
 987
 988         if (is_mx6ul() || is_mx6ull()) {
 989                 if (port > 1)
 990                         return 0;
 991         }
 992
 993         if (is_mx6sll()) {
 994                 if (port > 2)
 995                         return 0;
 996         }
 997
 998         switch (port) {
 999         case 0:
1000                 usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
1001                                         MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET;
1002                 clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL;
1003
1004                 break;
1005         case 1:
1006                 usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >>
1007                                         MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET;
1008                 clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL;
1009
1010                 break;
1011         case 2:
1012                 usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >>
1013                                         MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET;
1014                 clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL;
1015
1016                 break;
1017         case 3:
1018                 usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >>
1019                                         MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET;
1020                 clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL;
1021
1022                 break;
1023         default:
1024                 break;
1025         }
1026
1027         if (clk_sel)
1028                 root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
1029         else
1030                 root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
1031
1032         return root_freq / (usdhc_podf + 1);
1033 }
1034
1035 u32 imx_get_uartclk(void)
1036 {
1037         return get_uart_clk();
1038 }
1039
1040 u32 imx_get_fecclk(void)
1041 {
1042         return mxc_get_clock(MXC_IPG_CLK);
1043 }
1044
1045 #if defined(CONFIG_SATA) || defined(CONFIG_PCIE_IMX)
1046 static int enable_enet_pll(uint32_t en)
1047 {
1048         struct mxc_ccm_reg *const imx_ccm
1049                 = (struct mxc_ccm_reg *) CCM_BASE_ADDR;
1050         s32 timeout = 100000;
1051         u32 reg = 0;
1052
1053         /* Enable PLLs */
1054         reg = readl(&imx_ccm->analog_pll_enet);
1055         reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
1056         writel(reg, &imx_ccm->analog_pll_enet);
1057         reg |= BM_ANADIG_PLL_SYS_ENABLE;
1058         while (timeout--) {
1059                 if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
1060                         break;
1061         }
1062         if (timeout <= 0)
1063                 return -EIO;
1064         reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
1065         writel(reg, &imx_ccm->analog_pll_enet);
1066         reg |= en;
1067         writel(reg, &imx_ccm->analog_pll_enet);
1068         return 0;
1069 }
1070 #endif
1071
1072 #ifdef CONFIG_SATA
1073 static void ungate_sata_clock(void)
1074 {
1075         struct mxc_ccm_reg *const imx_ccm =
1076                 (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1077
1078         /* Enable SATA clock. */
1079         setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
1080 }
1081
1082 int enable_sata_clock(void)
1083 {
1084         ungate_sata_clock();
1085         return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
1086 }
1087
1088 void disable_sata_clock(void)
1089 {
1090         struct mxc_ccm_reg *const imx_ccm =
1091                 (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1092
1093         clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
1094 }
1095 #endif
1096
1097 #ifdef CONFIG_PCIE_IMX
1098 static void ungate_pcie_clock(void)
1099 {
1100         struct mxc_ccm_reg *const imx_ccm =
1101                 (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1102
1103         /* Enable PCIe clock. */
1104         setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
1105 }
1106
1107 int enable_pcie_clock(void)
1108 {
1109         struct anatop_regs *anatop_regs =
1110                 (struct anatop_regs *)ANATOP_BASE_ADDR;
1111         struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1112         u32 lvds1_clk_sel;
1113
1114         /*
1115          * Here be dragons!
1116          *
1117          * The register ANATOP_MISC1 is not documented in the Freescale
1118          * MX6RM. The register that is mapped in the ANATOP space and
1119          * marked as ANATOP_MISC1 is actually documented in the PMU section
1120          * of the datasheet as PMU_MISC1.
1121          *
1122          * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
1123          * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
1124          * for PCI express link that is clocked from the i.MX6.
1125          */
1126 #define ANADIG_ANA_MISC1_LVDSCLK1_IBEN          (1 << 12)
1127 #define ANADIG_ANA_MISC1_LVDSCLK1_OBEN          (1 << 10)
1128 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK     0x0000001F
1129 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
1130 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb
1131
1132         if (is_mx6sx())
1133                 lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
1134         else
1135                 lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
1136
1137         clrsetbits_le32(&anatop_regs->ana_misc1,
1138                         ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
1139                         ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
1140                         ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);
1141
1142         /* PCIe reference clock sourced from AXI. */
1143         clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
1144
1145         /* Party time! Ungate the clock to the PCIe. */
1146 #ifdef CONFIG_SATA
1147         ungate_sata_clock();
1148 #endif
1149         ungate_pcie_clock();
1150
1151         return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
1152                                BM_ANADIG_PLL_ENET_ENABLE_PCIE);
1153 }
1154 #endif
1155
1156 #ifdef CONFIG_IMX_HAB
1157 void hab_caam_clock_enable(unsigned char enable)
1158 {
1159         u32 reg;
1160
1161         if (is_mx6ull() || is_mx6sll()) {
1162                 /* CG5, DCP clock */
1163                 reg = __raw_readl(&imx_ccm->CCGR0);
1164                 if (enable)
1165                         reg |= MXC_CCM_CCGR0_DCP_CLK_MASK;
1166                 else
1167                         reg &= ~MXC_CCM_CCGR0_DCP_CLK_MASK;
1168                 __raw_writel(reg, &imx_ccm->CCGR0);
1169         } else {
1170                 /* CG4 ~ CG6, CAAM clocks */
1171                 reg = __raw_readl(&imx_ccm->CCGR0);
1172                 if (enable)
1173                         reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
1174                                 MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
1175                                 MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
1176                 else
1177                         reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
1178                                 MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
1179                                 MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
1180                 __raw_writel(reg, &imx_ccm->CCGR0);
1181         }
1182
1183         /* EMI slow clk */
1184         reg = __raw_readl(&imx_ccm->CCGR6);
1185         if (enable)
1186                 reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
1187         else
1188                 reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
1189         __raw_writel(reg, &imx_ccm->CCGR6);
1190 }
1191 #endif
1192
1193 static void enable_pll3(void)
1194 {
1195         struct anatop_regs __iomem *anatop =
1196                 (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
1197
1198         /* make sure pll3 is enabled */
1199         if ((readl(&anatop->usb1_pll_480_ctrl) &
1200                         BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
1201                 /* enable pll's power */
1202                 writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
1203                        &anatop->usb1_pll_480_ctrl_set);
1204                 writel(0x80, &anatop->ana_misc2_clr);
1205                 /* wait for pll lock */
1206                 while ((readl(&anatop->usb1_pll_480_ctrl) &
1207                         BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
1208                         ;
1209                 /* disable bypass */
1210                 writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
1211                        &anatop->usb1_pll_480_ctrl_clr);
1212                 /* enable pll output */
1213                 writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
1214                        &anatop->usb1_pll_480_ctrl_set);
1215         }
1216 }
1217
1218 void enable_thermal_clk(void)
1219 {
1220         enable_pll3();
1221 }
1222
1223 #ifdef CONFIG_MTD_NOR_FLASH
1224 void enable_eim_clk(unsigned char enable)
1225 {
1226         u32 reg;
1227
1228         reg = __raw_readl(&imx_ccm->CCGR6);
1229         if (enable)
1230                 reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
1231         else
1232                 reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
1233         __raw_writel(reg, &imx_ccm->CCGR6);
1234 }
1235 #endif
1236
1237 unsigned int mxc_get_clock(enum mxc_clock clk)
1238 {
1239         switch (clk) {
1240         case MXC_ARM_CLK:
1241                 return get_mcu_main_clk();
1242         case MXC_PER_CLK:
1243                 return get_periph_clk();
1244         case MXC_AHB_CLK:
1245                 return get_ahb_clk();
1246         case MXC_IPG_CLK:
1247                 return get_ipg_clk();
1248         case MXC_IPG_PERCLK:
1249         case MXC_I2C_CLK:
1250                 return get_ipg_per_clk();
1251         case MXC_UART_CLK:
1252                 return get_uart_clk();
1253         case MXC_CSPI_CLK:
1254                 return get_cspi_clk();
1255         case MXC_AXI_CLK:
1256                 return get_axi_clk();
1257         case MXC_EMI_SLOW_CLK:
1258                 return get_emi_slow_clk();
1259         case MXC_DDR_CLK:
1260                 return get_mmdc_ch0_clk();
1261         case MXC_ESDHC_CLK:
1262                 return get_usdhc_clk(0);
1263         case MXC_ESDHC2_CLK:
1264                 return get_usdhc_clk(1);
1265         case MXC_ESDHC3_CLK:
1266                 return get_usdhc_clk(2);
1267         case MXC_ESDHC4_CLK:
1268                 return get_usdhc_clk(3);
1269         case MXC_SATA_CLK:
1270                 return get_ahb_clk();
1271         default:
1272                 printf("Unsupported MXC CLK: %d\n", clk);
1273                 break;
1274         }
1275
1276         return 0;
1277 }
1278
1279 #ifndef CONFIG_MX6SX
1280 void enable_ipu_clock(void)
1281 {
1282         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1283
1284         setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);
1285
1286         if (is_mx6dqp()) {
1287                 setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
1288                 setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
1289         }
1290 }
1291
1292 void disable_ipu_clock(void)
1293 {
1294         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1295
1296         clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);
1297
1298         if (is_mx6dqp()) {
1299                 clrbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
1300                 clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
1301         }
1302 }
1303 #endif
1304
1305 #ifndef CONFIG_SPL_BUILD
1306 /*
1307  * Dump some core clockes.
1308  */
1309 int do_mx6_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
1310                       char *const argv[])
1311 {
1312         u32 freq;
1313         freq = decode_pll(PLL_SYS, MXC_HCLK);
1314         printf("PLL_SYS    %8d MHz\n", freq / 1000000);
1315         freq = decode_pll(PLL_BUS, MXC_HCLK);
1316         printf("PLL_BUS    %8d MHz\n", freq / 1000000);
1317         freq = decode_pll(PLL_USBOTG, MXC_HCLK);
1318         printf("PLL_OTG    %8d MHz\n", freq / 1000000);
1319         freq = decode_pll(PLL_ENET, MXC_HCLK);
1320         printf("PLL_NET    %8d MHz\n", freq / 1000000);
1321
1322         printf("\n");
1323         printf("ARM        %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000);
1324         printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
1325         printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
1326 #ifdef CONFIG_MXC_SPI
1327         printf("CSPI       %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
1328 #endif
1329         printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
1330         printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
1331         printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
1332         printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
1333         printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
1334         printf("USDHC3     %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
1335         printf("USDHC4     %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
1336         printf("EMI SLOW   %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
1337         printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
1338
1339         return 0;
1340 }
1341
1342 #if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
1343         defined(CONFIG_MX6S)
1344 static void disable_ldb_di_clock_sources(void)
1345 {
1346         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1347         int reg;
1348
1349         /* Make sure PFDs are disabled at boot. */
1350         reg = readl(&mxc_ccm->analog_pfd_528);
1351         /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
1352         if (is_mx6sdl())
1353                 reg |= 0x80008080;
1354         else
1355                 reg |= 0x80808080;
1356         writel(reg, &mxc_ccm->analog_pfd_528);
1357
1358         /* Disable PLL3 PFDs */
1359         reg = readl(&mxc_ccm->analog_pfd_480);
1360         reg |= 0x80808080;
1361         writel(reg, &mxc_ccm->analog_pfd_480);
1362
1363         /* Disable PLL5 */
1364         reg = readl(&mxc_ccm->analog_pll_video);
1365         reg &= ~(1 << 13);
1366         writel(reg, &mxc_ccm->analog_pll_video);
1367 }
1368
1369 static void enable_ldb_di_clock_sources(void)
1370 {
1371         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1372         int reg;
1373
1374         reg = readl(&mxc_ccm->analog_pfd_528);
1375         if (is_mx6sdl())
1376                 reg &= ~(0x80008080);
1377         else
1378                 reg &= ~(0x80808080);
1379         writel(reg, &mxc_ccm->analog_pfd_528);
1380
1381         reg = readl(&mxc_ccm->analog_pfd_480);
1382         reg &= ~(0x80808080);
1383         writel(reg, &mxc_ccm->analog_pfd_480);
1384 }
1385
1386 /*
1387  * Try call this function as early in the boot process as possible since the
1388  * function temporarily disables PLL2 PFD's, PLL3 PFD's and PLL5.
1389  */
1390 void select_ldb_di_clock_source(enum ldb_di_clock clk)
1391 {
1392         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
1393         int reg;
1394
1395         /*
1396          * Need to follow a strict procedure when changing the LDB
1397          * clock, else we can introduce a glitch. Things to keep in
1398          * mind:
1399          * 1. The current and new parent clocks must be disabled.
1400          * 2. The default clock for ldb_dio_clk is mmdc_ch1 which has
1401          * no CG bit.
1402          * 3. In the RTL implementation of the LDB_DI_CLK_SEL mux
1403          * the top four options are in one mux and the PLL3 option along
1404          * with another option is in the second mux. There is third mux
1405          * used to decide between the first and second mux.
1406          * The code below switches the parent to the bottom mux first
1407          * and then manipulates the top mux. This ensures that no glitch
1408          * will enter the divider.
1409          *
1410          * Need to disable MMDC_CH1 clock manually as there is no CG bit
1411          * for this clock. The only way to disable this clock is to move
1412          * it to pll3_sw_clk and then to disable pll3_sw_clk
1413          * Make sure periph2_clk2_sel is set to pll3_sw_clk
1414          */
1415
1416         /* Disable all ldb_di clock parents */
1417         disable_ldb_di_clock_sources();
1418
1419         /* Set MMDC_CH1 mask bit */
1420         reg = readl(&mxc_ccm->ccdr);
1421         reg |= MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
1422         writel(reg, &mxc_ccm->ccdr);
1423
1424         /* Set periph2_clk2_sel to be sourced from PLL3_sw_clk */
1425         reg = readl(&mxc_ccm->cbcmr);
1426         reg &= ~MXC_CCM_CBCMR_PERIPH2_CLK2_SEL;
1427         writel(reg, &mxc_ccm->cbcmr);
1428
1429         /*
1430          * Set the periph2_clk_sel to the top mux so that
1431          * mmdc_ch1 is from pll3_sw_clk.
1432          */
1433         reg = readl(&mxc_ccm->cbcdr);
1434         reg |= MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
1435         writel(reg, &mxc_ccm->cbcdr);
1436
1437         /* Wait for the clock switch */
1438         while (readl(&mxc_ccm->cdhipr))
1439                 ;
1440         /* Disable pll3_sw_clk by selecting bypass clock source */
1441         reg = readl(&mxc_ccm->ccsr);
1442         reg |= MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
1443         writel(reg, &mxc_ccm->ccsr);
1444
1445         /* Set the ldb_di0_clk and ldb_di1_clk to 111b */
1446         reg = readl(&mxc_ccm->cs2cdr);
1447         reg |= ((7 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
1448               | (7 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
1449         writel(reg, &mxc_ccm->cs2cdr);
1450
1451         /* Set the ldb_di0_clk and ldb_di1_clk to 100b */
1452         reg = readl(&mxc_ccm->cs2cdr);
1453         reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
1454               | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
1455         reg |= ((4 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
1456               | (4 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
1457         writel(reg, &mxc_ccm->cs2cdr);
1458
1459         /* Set the ldb_di0_clk and ldb_di1_clk to desired source */
1460         reg = readl(&mxc_ccm->cs2cdr);
1461         reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
1462               | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
1463         reg |= ((clk << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
1464               | (clk << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
1465         writel(reg, &mxc_ccm->cs2cdr);
1466
1467         /* Unbypass pll3_sw_clk */
1468         reg = readl(&mxc_ccm->ccsr);
1469         reg &= ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
1470         writel(reg, &mxc_ccm->ccsr);
1471
1472         /*
1473          * Set the periph2_clk_sel back to the bottom mux so that
1474          * mmdc_ch1 is from its original parent.
1475          */
1476         reg = readl(&mxc_ccm->cbcdr);
1477         reg &= ~MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
1478         writel(reg, &mxc_ccm->cbcdr);
1479
1480         /* Wait for the clock switch */
1481         while (readl(&mxc_ccm->cdhipr))
1482                 ;
1483         /* Clear MMDC_CH1 mask bit */
1484         reg = readl(&mxc_ccm->ccdr);
1485         reg &= ~MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
1486         writel(reg, &mxc_ccm->ccdr);
1487
1488         enable_ldb_di_clock_sources();
1489 }
1490 #endif
1491
1492 /***************************************************/
1493
1494 U_BOOT_CMD(
1495         clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks,
1496         "display clocks",
1497         ""
1498 );
1499 #endif