arch/arm/dts/zynqmp-zcu111-revA.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * dts file for Xilinx ZynqMP ZCU111
   4  *
   5  * (C) Copyright 2017 - 2018, Xilinx, Inc.
   6  *
   7  * Michal Simek <michal.simek@xilinx.com>
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "zynqmp.dtsi"
  13 #include "zynqmp-clk-ccf.dtsi"
  14 #include <dt-bindings/input/input.h>
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/phy/phy.h>
  17
  18 / {
  19         model = "ZynqMP ZCU111 RevA";
  20         compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
  21
  22         aliases {
  23                 ethernet0 = &gem3;
  24                 gpio0 = &gpio;
  25                 i2c0 = &i2c0;
  26                 i2c1 = &i2c1;
  27                 mmc0 = &sdhci1;
  28                 rtc0 = &rtc;
  29                 serial0 = &uart0;
  30                 serial1 = &dcc;
  31                 spi0 = &qspi;
  32                 usb0 = &usb0;
  33         };
  34
  35         chosen {
  36                 bootargs = "earlycon";
  37                 stdout-path = "serial0:115200n8";
  38                 xlnx,eeprom = &eeprom;
  39         };
  40
  41         memory@0 {
  42                 device_type = "memory";
  43                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
  44                 /* Another 4GB connected to PL */
  45         };
  46
  47         gpio-keys {
  48                 compatible = "gpio-keys";
  49                 autorepeat;
  50                 sw19 {
  51                         label = "sw19";
  52                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  53                         linux,code = <KEY_DOWN>;
  54                         gpio-key,wakeup;
  55                         autorepeat;
  56                 };
  57         };
  58
  59         leds {
  60                 compatible = "gpio-leds";
  61                 heartbeat_led {
  62                         label = "heartbeat";
  63                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  64                         linux,default-trigger = "heartbeat";
  65                 };
  66         };
  67 };
  68
  69 &dcc {
  70         status = "okay";
  71 };
  72
  73 &fpd_dma_chan1 {
  74         status = "okay";
  75 };
  76
  77 &fpd_dma_chan2 {
  78         status = "okay";
  79 };
  80
  81 &fpd_dma_chan3 {
  82         status = "okay";
  83 };
  84
  85 &fpd_dma_chan4 {
  86         status = "okay";
  87 };
  88
  89 &fpd_dma_chan5 {
  90         status = "okay";
  91 };
  92
  93 &fpd_dma_chan6 {
  94         status = "okay";
  95 };
  96
  97 &fpd_dma_chan7 {
  98         status = "okay";
  99 };
 100
 101 &fpd_dma_chan8 {
 102         status = "okay";
 103 };
 104
 105 &gem3 {
 106         status = "okay";
 107         phy-handle = <&phy0>;
 108         phy-mode = "rgmii-id";
 109         phy0: phy@c {
 110                 reg = <0xc>;
 111                 ti,rx-internal-delay = <0x8>;
 112                 ti,tx-internal-delay = <0xa>;
 113                 ti,fifo-depth = <0x1>;
 114         };
 115 };
 116
 117 &gpio {
 118         status = "okay";
 119 };
 120
 121 &gpu {
 122         status = "okay";
 123 };
 124
 125 &i2c0 {
 126         status = "okay";
 127         clock-frequency = <400000>;
 128
 129         tca6416_u22: gpio@20 {
 130                 compatible = "ti,tca6416";
 131                 reg = <0x20>;
 132                 gpio-controller; /* interrupt not connected */
 133                 #gpio-cells = <2>;
 134                 /*
 135                  * IRQ not connected
 136                  * Lines:
 137                  * 0 - MAX6643_OT_B
 138                  * 1 - MAX6643_FANFAIL_B
 139                  * 2 - MIO26_PMU_INPUT_LS
 140                  * 4 - SFP_SI5382_INT_ALM
 141                  * 5 - IIC_MUX_RESET_B
 142                  * 6 - GEM3_EXP_RESET_B
 143                  * 10 - FMCP_HSPC_PRSNT_M2C_B
 144                  * 11 - CLK_SPI_MUX_SEL0
 145                  * 12 - CLK_SPI_MUX_SEL1
 146                  * 16 - IRPS5401_ALERT_B
 147                  * 17 - INA226_PMBUS_ALERT
 148                  * 3, 7, 13-15 - not connected
 149                  */
 150         };
 151
 152         i2c-mux@75 { /* u23 */
 153                 compatible = "nxp,pca9544";
 154                 #address-cells = <1>;
 155                 #size-cells = <0>;
 156                 reg = <0x75>;
 157                 i2c@0 {
 158                         #address-cells = <1>;
 159                         #size-cells = <0>;
 160                         reg = <0>;
 161                         /* PS_PMBUS */
 162                         /* PMBUS_ALERT done via pca9544 */
 163                         ina226@40 { /* u67 */
 164                                 compatible = "ti,ina226";
 165                                 reg = <0x40>;
 166                                 shunt-resistor = <2000>;
 167                         };
 168                         ina226@41 { /* u59 */
 169                                 compatible = "ti,ina226";
 170                                 reg = <0x41>;
 171                                 shunt-resistor = <5000>;
 172                         };
 173                         ina226@42 { /* u61 */
 174                                 compatible = "ti,ina226";
 175                                 reg = <0x42>;
 176                                 shunt-resistor = <5000>;
 177                         };
 178                         ina226@43 { /* u60 */
 179                                 compatible = "ti,ina226";
 180                                 reg = <0x43>;
 181                                 shunt-resistor = <5000>;
 182                         };
 183                         ina226@45 { /* u64 */
 184                                 compatible = "ti,ina226";
 185                                 reg = <0x45>;
 186                                 shunt-resistor = <5000>;
 187                         };
 188                         ina226@46 { /* u69 */
 189                                 compatible = "ti,ina226";
 190                                 reg = <0x46>;
 191                                 shunt-resistor = <2000>;
 192                         };
 193                         ina226@47 { /* u66 */
 194                                 compatible = "ti,ina226";
 195                                 reg = <0x47>;
 196                                 shunt-resistor = <5000>;
 197                         };
 198                         ina226@48 { /* u65 */
 199                                 compatible = "ti,ina226";
 200                                 reg = <0x48>;
 201                                 shunt-resistor = <5000>;
 202                         };
 203                         ina226@49 { /* u63 */
 204                                 compatible = "ti,ina226";
 205                                 reg = <0x49>;
 206                                 shunt-resistor = <5000>;
 207                         };
 208                         ina226@4a { /* u3 */
 209                                 compatible = "ti,ina226";
 210                                 reg = <0x4a>;
 211                                 shunt-resistor = <5000>;
 212                         };
 213                         ina226@4b { /* u71 */
 214                                 compatible = "ti,ina226";
 215                                 reg = <0x4b>;
 216                                 shunt-resistor = <5000>;
 217                         };
 218                         ina226@4c { /* u77 */
 219                                 compatible = "ti,ina226";
 220                                 reg = <0x4c>;
 221                                 shunt-resistor = <5000>;
 222                         };
 223                         ina226@4d { /* u73 */
 224                                 compatible = "ti,ina226";
 225                                 reg = <0x4d>;
 226                                 shunt-resistor = <5000>;
 227                         };
 228                         ina226@4e { /* u79 */
 229                                 compatible = "ti,ina226";
 230                                 reg = <0x4e>;
 231                                 shunt-resistor = <5000>;
 232                         };
 233                 };
 234                 i2c@1 {
 235                         #address-cells = <1>;
 236                         #size-cells = <0>;
 237                         reg = <1>;
 238                         /* NC */
 239                 };
 240                 i2c@2 {
 241                         #address-cells = <1>;
 242                         #size-cells = <0>;
 243                         reg = <2>;
 244                         irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */
 245                                 #clock-cells = <0>;
 246                                 compatible = "infineon,irps5401";
 247                                 reg = <0x43>;
 248                         };
 249                         irps5401_44: irps54012@44 { /* IRPS5401 - u55 */
 250                                 #clock-cells = <0>;
 251                                 compatible = "infineon,irps5401";
 252                                 reg = <0x44>;
 253                         };
 254                         irps5401_45: irps54012@45 { /* IRPS5401 - u57 */
 255                                 #clock-cells = <0>;
 256                                 compatible = "infineon,irps5401";
 257                                 reg = <0x45>;
 258                         };
 259                         /* u68 IR38064 +0 */
 260                         /* u70 IR38060 +1 */
 261                         /* u74 IR38060 +2 */
 262                         /* u75 IR38060 +6 */
 263                         /* J19 header too */
 264
 265                 };
 266                 i2c@3 {
 267                         #address-cells = <1>;
 268                         #size-cells = <0>;
 269                         reg = <3>;
 270                         /* SYSMON */
 271                 };
 272         };
 273 };
 274
 275 &i2c1 {
 276         status = "okay";
 277         clock-frequency = <400000>;
 278
 279         i2c-mux@74 { /* u26 */
 280                 compatible = "nxp,pca9548";
 281                 #address-cells = <1>;
 282                 #size-cells = <0>;
 283                 reg = <0x74>;
 284                 i2c@0 {
 285                         #address-cells = <1>;
 286                         #size-cells = <0>;
 287                         reg = <0>;
 288                         /*
 289                          * IIC_EEPROM 1kB memory which uses 256B blocks
 290                          * where every block has different address.
 291                          *    0 - 256B address 0x54
 292                          * 256B - 512B address 0x55
 293                          * 512B - 768B address 0x56
 294                          * 768B - 1024B address 0x57
 295                          */
 296                         eeprom: eeprom@54 { /* u88 */
 297                                 compatible = "atmel,24c08";
 298                                 reg = <0x54>;
 299                         };
 300                 };
 301                 i2c@1 {
 302                         #address-cells = <1>;
 303                         #size-cells = <0>;
 304                         reg = <1>;
 305                         si5341: clock-generator@36 { /* SI5341 - u46 */
 306                                 compatible = "si5341";
 307                                 reg = <0x36>;
 308                         };
 309
 310                 };
 311                 i2c@2 {
 312                         #address-cells = <1>;
 313                         #size-cells = <0>;
 314                         reg = <2>;
 315                         si570_1: clock-generator@5d { /* USER SI570 - u47 */
 316                                 #clock-cells = <0>;
 317                                 compatible = "silabs,si570";
 318                                 reg = <0x5d>;
 319                                 temperature-stability = <50>;
 320                                 factory-fout = <300000000>;
 321                                 clock-frequency = <300000000>;
 322                                 clock-output-names = "si570_user";
 323                         };
 324                 };
 325                 i2c@3 {
 326                         #address-cells = <1>;
 327                         #size-cells = <0>;
 328                         reg = <3>;
 329                         si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
 330                                 #clock-cells = <0>;
 331                                 compatible = "silabs,si570";
 332                                 reg = <0x5d>;
 333                                 temperature-stability = <50>;
 334                                 factory-fout = <156250000>;
 335                                 clock-frequency = <148500000>;
 336                                 clock-output-names = "si570_mgt";
 337                         };
 338                 };
 339                 i2c@4 {
 340                         #address-cells = <1>;
 341                         #size-cells = <0>;
 342                         reg = <4>;
 343                         si5328: clock-generator@69 { /* SI5328 - u48 */
 344                                 compatible = "silabs,si5328";
 345                                 reg = <0x69>;
 346                         };
 347                 };
 348                 i2c@5 {
 349                         #address-cells = <1>;
 350                         #size-cells = <0>;
 351                         reg = <5>;
 352                                 sc18is603@2f { /* sc18is602 - u93 */
 353                                         compatible = "nxp,sc18is603";
 354                                         reg = <0x2f>;
 355                                         /* 4 gpios for CS not handled by driver */
 356                                         /*
 357                                          * USB2ANY cable or
 358                                          * LMK04208 - u90 or
 359                                          * LMX2594 - u102 or
 360                                          * LMX2594 - u103 or
 361                                          * LMX2594 - u104
 362                                          */
 363                                 };
 364                 };
 365                 i2c@6 {
 366                         #address-cells = <1>;
 367                         #size-cells = <0>;
 368                         reg = <6>;
 369                         /* FMC connector */
 370                 };
 371                 /* 7 NC */
 372         };
 373
 374         i2c-mux@75 {
 375                 compatible = "nxp,pca9548"; /* u27 */
 376                 #address-cells = <1>;
 377                 #size-cells = <0>;
 378                 reg = <0x75>;
 379
 380                 i2c@0 {
 381                         #address-cells = <1>;
 382                         #size-cells = <0>;
 383                         reg = <0>;
 384                         /* FMCP_HSPC_IIC */
 385                 };
 386                 i2c@1 {
 387                         #address-cells = <1>;
 388                         #size-cells = <0>;
 389                         reg = <1>;
 390                         /* NC */
 391                 };
 392                 i2c@2 {
 393                         #address-cells = <1>;
 394                         #size-cells = <0>;
 395                         reg = <2>;
 396                         /* SYSMON */
 397                 };
 398                 i2c@3 {
 399                         #address-cells = <1>;
 400                         #size-cells = <0>;
 401                         reg = <3>;
 402                         /* DDR4 SODIMM */
 403                 };
 404                 i2c@4 {
 405                         #address-cells = <1>;
 406                         #size-cells = <0>;
 407                         reg = <4>;
 408                         /* SFP3 */
 409                 };
 410                 i2c@5 {
 411                         #address-cells = <1>;
 412                         #size-cells = <0>;
 413                         reg = <5>;
 414                         /* SFP2 */
 415                 };
 416                 i2c@6 {
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419                         reg = <6>;
 420                         /* SFP1 */
 421                 };
 422                 i2c@7 {
 423                         #address-cells = <1>;
 424                         #size-cells = <0>;
 425                         reg = <7>;
 426                         /* SFP0 */
 427                 };
 428         };
 429 };
 430
 431 &qspi {
 432         status = "okay";
 433         is-dual = <1>;
 434         flash@0 {
 435                 compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
 436                 #address-cells = <1>;
 437                 #size-cells = <1>;
 438                 reg = <0x0>;
 439                 spi-tx-bus-width = <1>;
 440                 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 441                 spi-max-frequency = <108000000>; /* Based on DC1 spec */
 442                 partition@qspi-fsbl-uboot { /* for testing purpose */
 443                         label = "qspi-fsbl-uboot";
 444                         reg = <0x0 0x100000>;
 445                 };
 446                 partition@qspi-linux { /* for testing purpose */
 447                         label = "qspi-linux";
 448                         reg = <0x100000 0x500000>;
 449                 };
 450                 partition@qspi-device-tree { /* for testing purpose */
 451                         label = "qspi-device-tree";
 452                         reg = <0x600000 0x20000>;
 453                 };
 454                 partition@qspi-rootfs { /* for testing purpose */
 455                         label = "qspi-rootfs";
 456                         reg = <0x620000 0x5E0000>;
 457                 };
 458         };
 459 };
 460
 461 &rtc {
 462         status = "okay";
 463 };
 464
 465 &sata {
 466         status = "okay";
 467         /* SATA OOB timing settings */
 468         ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 469         ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 470         ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 471         ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 472         ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 473         ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 474         ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 475         ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 476         phy-names = "sata-phy";
 477         phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>;
 478 };
 479
 480 /* SD1 with level shifter */
 481 &sdhci1 {
 482         status = "okay";
 483         no-1-8-v;
 484         disable-wp;
 485         xlnx,mio_bank = <1>;
 486 };
 487
 488 &serdes {
 489         status = "okay";
 490 };
 491
 492 &uart0 {
 493         status = "okay";
 494 };
 495
 496 /* ULPI SMSC USB3320 */
 497 &usb0 {
 498         status = "okay";
 499 };
 500
 501 &dwc3_0 {
 502         status = "okay";
 503         dr_mode = "host";
 504         snps,usb3_lpm_capable;
 505         phy-names = "usb3-phy";
 506         phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
 507 };