fdt: Fix alignment issue when reading 64-bits properties from fdt
[oweals/u-boot.git] / arch / arm / dts / sun50i-h6.dtsi
1 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
2 /*
3  * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
4  */
5
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/sun50i-h6-ccu.h>
8 #include <dt-bindings/clock/sun50i-h6-r-ccu.h>
9 #include <dt-bindings/clock/sun8i-de2.h>
10 #include <dt-bindings/clock/sun8i-tcon-top.h>
11 #include <dt-bindings/reset/sun50i-h6-ccu.h>
12 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
13 #include <dt-bindings/reset/sun8i-de2.h>
14
15 / {
16         interrupt-parent = <&gic>;
17         #address-cells = <1>;
18         #size-cells = <1>;
19
20         cpus {
21                 #address-cells = <1>;
22                 #size-cells = <0>;
23
24                 cpu0: cpu@0 {
25                         compatible = "arm,cortex-a53";
26                         device_type = "cpu";
27                         reg = <0>;
28                         enable-method = "psci";
29                 };
30
31                 cpu1: cpu@1 {
32                         compatible = "arm,cortex-a53";
33                         device_type = "cpu";
34                         reg = <1>;
35                         enable-method = "psci";
36                 };
37
38                 cpu2: cpu@2 {
39                         compatible = "arm,cortex-a53";
40                         device_type = "cpu";
41                         reg = <2>;
42                         enable-method = "psci";
43                 };
44
45                 cpu3: cpu@3 {
46                         compatible = "arm,cortex-a53";
47                         device_type = "cpu";
48                         reg = <3>;
49                         enable-method = "psci";
50                 };
51         };
52
53         de: display-engine {
54                 compatible = "allwinner,sun50i-h6-display-engine";
55                 allwinner,pipelines = <&mixer0>;
56                 status = "disabled";
57         };
58
59         iosc: internal-osc-clk {
60                 #clock-cells = <0>;
61                 compatible = "fixed-clock";
62                 clock-frequency = <16000000>;
63                 clock-accuracy = <300000000>;
64                 clock-output-names = "iosc";
65         };
66
67         osc24M: osc24M_clk {
68                 #clock-cells = <0>;
69                 compatible = "fixed-clock";
70                 clock-frequency = <24000000>;
71                 clock-output-names = "osc24M";
72         };
73
74         osc32k: osc32k_clk {
75                 #clock-cells = <0>;
76                 compatible = "fixed-clock";
77                 clock-frequency = <32768>;
78                 clock-output-names = "osc32k";
79         };
80
81         psci {
82                 compatible = "arm,psci-0.2";
83                 method = "smc";
84         };
85
86         timer {
87                 compatible = "arm,armv8-timer";
88                 interrupts = <GIC_PPI 13
89                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
90                              <GIC_PPI 14
91                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
92                              <GIC_PPI 11
93                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
94                              <GIC_PPI 10
95                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
96         };
97
98         soc {
99                 compatible = "simple-bus";
100                 #address-cells = <1>;
101                 #size-cells = <1>;
102                 ranges;
103
104                 display-engine@1000000 {
105                         compatible = "allwinner,sun50i-h6-de3",
106                                      "allwinner,sun50i-a64-de2";
107                         reg = <0x1000000 0x400000>;
108                         allwinner,sram = <&de2_sram 1>;
109                         #address-cells = <1>;
110                         #size-cells = <1>;
111                         ranges = <0 0x1000000 0x400000>;
112
113                         display_clocks: clock@0 {
114                                 compatible = "allwinner,sun50i-h6-de3-clk";
115                                 reg = <0x0 0x10000>;
116                                 clocks = <&ccu CLK_DE>,
117                                          <&ccu CLK_BUS_DE>;
118                                 clock-names = "mod",
119                                               "bus";
120                                 resets = <&ccu RST_BUS_DE>;
121                                 #clock-cells = <1>;
122                                 #reset-cells = <1>;
123                         };
124
125                         mixer0: mixer@100000 {
126                                 compatible = "allwinner,sun50i-h6-de3-mixer-0";
127                                 reg = <0x100000 0x100000>;
128                                 clocks = <&display_clocks CLK_BUS_MIXER0>,
129                                          <&display_clocks CLK_MIXER0>;
130                                 clock-names = "bus",
131                                               "mod";
132                                 resets = <&display_clocks RST_MIXER0>;
133
134                                 ports {
135                                         #address-cells = <1>;
136                                         #size-cells = <0>;
137
138                                         mixer0_out: port@1 {
139                                                 reg = <1>;
140
141                                                 mixer0_out_tcon_top_mixer0: endpoint {
142                                                         remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
143                                                 };
144                                         };
145                                 };
146                         };
147                 };
148
149                 video-codec@1c0e000 {
150                         compatible = "allwinner,sun50i-h6-video-engine";
151                         reg = <0x01c0e000 0x2000>;
152                         clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
153                                  <&ccu CLK_MBUS_VE>;
154                         clock-names = "ahb", "mod", "ram";
155                         resets = <&ccu RST_BUS_VE>;
156                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
157                         allwinner,sram = <&ve_sram 1>;
158                 };
159
160                 syscon: syscon@3000000 {
161                         compatible = "allwinner,sun50i-h6-system-control",
162                                      "allwinner,sun50i-a64-system-control";
163                         reg = <0x03000000 0x1000>;
164                         #address-cells = <1>;
165                         #size-cells = <1>;
166                         ranges;
167
168                         sram_c: sram@28000 {
169                                 compatible = "mmio-sram";
170                                 reg = <0x00028000 0x1e000>;
171                                 #address-cells = <1>;
172                                 #size-cells = <1>;
173                                 ranges = <0 0x00028000 0x1e000>;
174
175                                 de2_sram: sram-section@0 {
176                                         compatible = "allwinner,sun50i-h6-sram-c",
177                                                      "allwinner,sun50i-a64-sram-c";
178                                         reg = <0x0000 0x1e000>;
179                                 };
180                         };
181
182                         sram_c1: sram@1a00000 {
183                                 compatible = "mmio-sram";
184                                 reg = <0x01a00000 0x200000>;
185                                 #address-cells = <1>;
186                                 #size-cells = <1>;
187                                 ranges = <0 0x01a00000 0x200000>;
188
189                                 ve_sram: sram-section@0 {
190                                         compatible = "allwinner,sun50i-h6-sram-c1",
191                                                      "allwinner,sun4i-a10-sram-c1";
192                                         reg = <0x000000 0x200000>;
193                                 };
194                         };
195                 };
196
197                 ccu: clock@3001000 {
198                         compatible = "allwinner,sun50i-h6-ccu";
199                         reg = <0x03001000 0x1000>;
200                         clocks = <&osc24M>, <&osc32k>, <&iosc>;
201                         clock-names = "hosc", "losc", "iosc";
202                         #clock-cells = <1>;
203                         #reset-cells = <1>;
204                 };
205
206                 sid: sid@3006000 {
207                         compatible = "allwinner,sun50i-h6-sid";
208                         reg = <0x03006000 0x400>;
209                 };
210
211                 pio: pinctrl@300b000 {
212                         compatible = "allwinner,sun50i-h6-pinctrl";
213                         reg = <0x0300b000 0x400>;
214                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
215                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
216                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
217                                      <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
218                         clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
219                         clock-names = "apb", "hosc", "losc";
220                         gpio-controller;
221                         #gpio-cells = <3>;
222                         interrupt-controller;
223                         #interrupt-cells = <3>;
224
225                         ext_rgmii_pins: rgmii-pins {
226                                 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
227                                        "PD5", "PD7", "PD8", "PD9", "PD10",
228                                        "PD11", "PD12", "PD13", "PD19", "PD20";
229                                 function = "emac";
230                                 drive-strength = <40>;
231                         };
232
233                         hdmi_pins: hdmi-pins {
234                                 pins = "PH8", "PH9", "PH10";
235                                 function = "hdmi";
236                         };
237
238                         mmc0_pins: mmc0-pins {
239                                 pins = "PF0", "PF1", "PF2", "PF3",
240                                        "PF4", "PF5";
241                                 function = "mmc0";
242                                 drive-strength = <30>;
243                                 bias-pull-up;
244                         };
245
246                         mmc2_pins: mmc2-pins {
247                                 pins = "PC1", "PC4", "PC5", "PC6",
248                                        "PC7", "PC8", "PC9", "PC10",
249                                        "PC11", "PC12", "PC13", "PC14";
250                                 function = "mmc2";
251                                 drive-strength = <30>;
252                                 bias-pull-up;
253                         };
254
255                         uart0_ph_pins: uart0-ph-pins {
256                                 pins = "PH0", "PH1";
257                                 function = "uart0";
258                         };
259                 };
260
261                 gic: interrupt-controller@3021000 {
262                         compatible = "arm,gic-400";
263                         reg = <0x03021000 0x1000>,
264                               <0x03022000 0x2000>,
265                               <0x03024000 0x2000>,
266                               <0x03026000 0x2000>;
267                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
268                         interrupt-controller;
269                         #interrupt-cells = <3>;
270                 };
271
272                 mmc0: mmc@4020000 {
273                         compatible = "allwinner,sun50i-h6-mmc",
274                                      "allwinner,sun50i-a64-mmc";
275                         reg = <0x04020000 0x1000>;
276                         clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
277                         clock-names = "ahb", "mmc";
278                         resets = <&ccu RST_BUS_MMC0>;
279                         reset-names = "ahb";
280                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
281                         pinctrl-names = "default";
282                         pinctrl-0 = <&mmc0_pins>;
283                         status = "disabled";
284                         #address-cells = <1>;
285                         #size-cells = <0>;
286                 };
287
288                 mmc1: mmc@4021000 {
289                         compatible = "allwinner,sun50i-h6-mmc",
290                                      "allwinner,sun50i-a64-mmc";
291                         reg = <0x04021000 0x1000>;
292                         clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
293                         clock-names = "ahb", "mmc";
294                         resets = <&ccu RST_BUS_MMC1>;
295                         reset-names = "ahb";
296                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
297                         status = "disabled";
298                         #address-cells = <1>;
299                         #size-cells = <0>;
300                 };
301
302                 mmc2: mmc@4022000 {
303                         compatible = "allwinner,sun50i-h6-emmc",
304                                      "allwinner,sun50i-a64-emmc";
305                         reg = <0x04022000 0x1000>;
306                         clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
307                         clock-names = "ahb", "mmc";
308                         resets = <&ccu RST_BUS_MMC2>;
309                         reset-names = "ahb";
310                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
311                         pinctrl-names = "default";
312                         pinctrl-0 = <&mmc2_pins>;
313                         status = "disabled";
314                         #address-cells = <1>;
315                         #size-cells = <0>;
316                 };
317
318                 uart0: serial@5000000 {
319                         compatible = "snps,dw-apb-uart";
320                         reg = <0x05000000 0x400>;
321                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
322                         reg-shift = <2>;
323                         reg-io-width = <4>;
324                         clocks = <&ccu CLK_BUS_UART0>;
325                         resets = <&ccu RST_BUS_UART0>;
326                         status = "disabled";
327                 };
328
329                 uart1: serial@5000400 {
330                         compatible = "snps,dw-apb-uart";
331                         reg = <0x05000400 0x400>;
332                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
333                         reg-shift = <2>;
334                         reg-io-width = <4>;
335                         clocks = <&ccu CLK_BUS_UART1>;
336                         resets = <&ccu RST_BUS_UART1>;
337                         status = "disabled";
338                 };
339
340                 uart2: serial@5000800 {
341                         compatible = "snps,dw-apb-uart";
342                         reg = <0x05000800 0x400>;
343                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
344                         reg-shift = <2>;
345                         reg-io-width = <4>;
346                         clocks = <&ccu CLK_BUS_UART2>;
347                         resets = <&ccu RST_BUS_UART2>;
348                         status = "disabled";
349                 };
350
351                 uart3: serial@5000c00 {
352                         compatible = "snps,dw-apb-uart";
353                         reg = <0x05000c00 0x400>;
354                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
355                         reg-shift = <2>;
356                         reg-io-width = <4>;
357                         clocks = <&ccu CLK_BUS_UART3>;
358                         resets = <&ccu RST_BUS_UART3>;
359                         status = "disabled";
360                 };
361
362                 emac: ethernet@5020000 {
363                         compatible = "allwinner,sun50i-h6-emac",
364                                      "allwinner,sun50i-a64-emac";
365                         syscon = <&syscon>;
366                         reg = <0x05020000 0x10000>;
367                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
368                         interrupt-names = "macirq";
369                         resets = <&ccu RST_BUS_EMAC>;
370                         reset-names = "stmmaceth";
371                         clocks = <&ccu CLK_BUS_EMAC>;
372                         clock-names = "stmmaceth";
373                         status = "disabled";
374
375                         mdio: mdio {
376                                 compatible = "snps,dwmac-mdio";
377                                 #address-cells = <1>;
378                                 #size-cells = <0>;
379                         };
380                 };
381
382                 usb2otg: usb@5100000 {
383                         compatible = "allwinner,sun50i-h6-musb",
384                                      "allwinner,sun8i-a33-musb";
385                         reg = <0x05100000 0x0400>;
386                         clocks = <&ccu CLK_BUS_OTG>;
387                         resets = <&ccu RST_BUS_OTG>;
388                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
389                         interrupt-names = "mc";
390                         phys = <&usb2phy 0>;
391                         phy-names = "usb";
392                         extcon = <&usb2phy 0>;
393                         status = "disabled";
394                 };
395
396                 usb2phy: phy@5100400 {
397                         compatible = "allwinner,sun50i-h6-usb-phy";
398                         reg = <0x05100400 0x24>,
399                               <0x05101800 0x4>,
400                               <0x05311800 0x4>;
401                         reg-names = "phy_ctrl",
402                                     "pmu0",
403                                     "pmu3";
404                         clocks = <&ccu CLK_USB_PHY0>,
405                                  <&ccu CLK_USB_PHY3>;
406                         clock-names = "usb0_phy",
407                                       "usb3_phy";
408                         resets = <&ccu RST_USB_PHY0>,
409                                  <&ccu RST_USB_PHY3>;
410                         reset-names = "usb0_reset",
411                                       "usb3_reset";
412                         status = "disabled";
413                         #phy-cells = <1>;
414                 };
415
416                 ehci0: usb@5101000 {
417                         compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
418                         reg = <0x05101000 0x100>;
419                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
420                         clocks = <&ccu CLK_BUS_OHCI0>,
421                                  <&ccu CLK_BUS_EHCI0>,
422                                  <&ccu CLK_USB_OHCI0>;
423                         resets = <&ccu RST_BUS_OHCI0>,
424                                  <&ccu RST_BUS_EHCI0>;
425                         status = "disabled";
426                 };
427
428                 ohci0: usb@5101400 {
429                         compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
430                         reg = <0x05101400 0x100>;
431                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
432                         clocks = <&ccu CLK_BUS_OHCI0>,
433                                  <&ccu CLK_USB_OHCI0>;
434                         resets = <&ccu RST_BUS_OHCI0>;
435                         status = "disabled";
436                 };
437
438                 ehci3: usb@5311000 {
439                         compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
440                         reg = <0x05311000 0x100>;
441                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
442                         clocks = <&ccu CLK_BUS_OHCI3>,
443                                  <&ccu CLK_BUS_EHCI3>,
444                                  <&ccu CLK_USB_OHCI3>;
445                         resets = <&ccu RST_BUS_OHCI3>,
446                                  <&ccu RST_BUS_EHCI3>;
447                         phys = <&usb2phy 3>;
448                         phy-names = "usb";
449                         status = "disabled";
450                 };
451
452                 ohci3: usb@5311400 {
453                         compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
454                         reg = <0x05311400 0x100>;
455                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
456                         clocks = <&ccu CLK_BUS_OHCI3>,
457                                  <&ccu CLK_USB_OHCI3>;
458                         resets = <&ccu RST_BUS_OHCI3>;
459                         phys = <&usb2phy 3>;
460                         phy-names = "usb";
461                         status = "disabled";
462                 };
463
464                 hdmi: hdmi@6000000 {
465                         compatible = "allwinner,sun50i-h6-dw-hdmi";
466                         reg = <0x06000000 0x10000>;
467                         reg-io-width = <1>;
468                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
469                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
470                                  <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
471                                  <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
472                         clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
473                                       "hdcp-bus";
474                         resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
475                         reset-names = "ctrl", "hdcp";
476                         phys = <&hdmi_phy>;
477                         phy-names = "hdmi-phy";
478                         pinctrl-names = "default";
479                         pinctrl-0 = <&hdmi_pins>;
480                         status = "disabled";
481
482                         ports {
483                                 #address-cells = <1>;
484                                 #size-cells = <0>;
485
486                                 hdmi_in: port@0 {
487                                         reg = <0>;
488
489                                         hdmi_in_tcon_top: endpoint {
490                                                 remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
491                                         };
492                                 };
493
494                                 hdmi_out: port@1 {
495                                         reg = <1>;
496                                 };
497                         };
498                 };
499
500                 hdmi_phy: hdmi-phy@6010000 {
501                         compatible = "allwinner,sun50i-h6-hdmi-phy";
502                         reg = <0x06010000 0x10000>;
503                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
504                         clock-names = "bus", "mod";
505                         resets = <&ccu RST_BUS_HDMI>;
506                         reset-names = "phy";
507                         #phy-cells = <0>;
508                 };
509
510                 tcon_top: tcon-top@6510000 {
511                         compatible = "allwinner,sun50i-h6-tcon-top";
512                         reg = <0x06510000 0x1000>;
513                         clocks = <&ccu CLK_BUS_TCON_TOP>,
514                                  <&ccu CLK_TCON_TV0>;
515                         clock-names = "bus",
516                                       "tcon-tv0";
517                         clock-output-names = "tcon-top-tv0";
518                         resets = <&ccu RST_BUS_TCON_TOP>;
519                         reset-names = "rst";
520                         #clock-cells = <1>;
521
522                         ports {
523                                 #address-cells = <1>;
524                                 #size-cells = <0>;
525
526                                 tcon_top_mixer0_in: port@0 {
527                                         #address-cells = <1>;
528                                         #size-cells = <0>;
529                                         reg = <0>;
530
531                                         tcon_top_mixer0_in_mixer0: endpoint@0 {
532                                                 reg = <0>;
533                                                 remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
534                                         };
535                                 };
536
537                                 tcon_top_mixer0_out: port@1 {
538                                         #address-cells = <1>;
539                                         #size-cells = <0>;
540                                         reg = <1>;
541
542                                         tcon_top_mixer0_out_tcon_tv: endpoint@2 {
543                                                 reg = <2>;
544                                                 remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
545                                         };
546                                 };
547
548                                 tcon_top_hdmi_in: port@4 {
549                                         #address-cells = <1>;
550                                         #size-cells = <0>;
551                                         reg = <4>;
552
553                                         tcon_top_hdmi_in_tcon_tv: endpoint@0 {
554                                                 reg = <0>;
555                                                 remote-endpoint = <&tcon_tv_out_tcon_top>;
556                                         };
557                                 };
558
559                                 tcon_top_hdmi_out: port@5 {
560                                         reg = <5>;
561
562                                         tcon_top_hdmi_out_hdmi: endpoint {
563                                                 remote-endpoint = <&hdmi_in_tcon_top>;
564                                         };
565                                 };
566                         };
567                 };
568
569                 tcon_tv: lcd-controller@6515000 {
570                         compatible = "allwinner,sun50i-h6-tcon-tv",
571                                      "allwinner,sun8i-r40-tcon-tv";
572                         reg = <0x06515000 0x1000>;
573                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
574                         clocks = <&ccu CLK_BUS_TCON_TV0>,
575                                  <&tcon_top CLK_TCON_TOP_TV0>;
576                         clock-names = "ahb",
577                                       "tcon-ch1";
578                         resets = <&ccu RST_BUS_TCON_TV0>;
579                         reset-names = "lcd";
580
581                         ports {
582                                 #address-cells = <1>;
583                                 #size-cells = <0>;
584
585                                 tcon_tv_in: port@0 {
586                                         reg = <0>;
587
588                                         tcon_tv_in_tcon_top_mixer0: endpoint {
589                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
590                                         };
591                                 };
592
593                                 tcon_tv_out: port@1 {
594                                         #address-cells = <1>;
595                                         #size-cells = <0>;
596                                         reg = <1>;
597
598                                         tcon_tv_out_tcon_top: endpoint@1 {
599                                                 reg = <1>;
600                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
601                                         };
602                                 };
603                         };
604                 };
605
606                 r_ccu: clock@7010000 {
607                         compatible = "allwinner,sun50i-h6-r-ccu";
608                         reg = <0x07010000 0x400>;
609                         clocks = <&osc24M>, <&osc32k>, <&iosc>,
610                                  <&ccu CLK_PLL_PERIPH0>;
611                         clock-names = "hosc", "losc", "iosc", "pll-periph";
612                         #clock-cells = <1>;
613                         #reset-cells = <1>;
614                 };
615
616                 r_intc: interrupt-controller@7021000 {
617                         compatible = "allwinner,sun50i-h6-r-intc",
618                                      "allwinner,sun6i-a31-r-intc";
619                         interrupt-controller;
620                         #interrupt-cells = <2>;
621                         reg = <0x07021000 0x400>;
622                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
623                 };
624
625                 r_pio: pinctrl@7022000 {
626                         compatible = "allwinner,sun50i-h6-r-pinctrl";
627                         reg = <0x07022000 0x400>;
628                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
629                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
630                         clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
631                         clock-names = "apb", "hosc", "losc";
632                         gpio-controller;
633                         #gpio-cells = <3>;
634                         interrupt-controller;
635                         #interrupt-cells = <3>;
636
637                         r_i2c_pins: r-i2c-pins {
638                                 pins = "PL0", "PL1";
639                                 function = "s_i2c";
640                         };
641                 };
642
643                 r_i2c: i2c@7081400 {
644                         compatible = "allwinner,sun6i-a31-i2c";
645                         reg = <0x07081400 0x400>;
646                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
647                         clocks = <&r_ccu CLK_R_APB2_I2C>;
648                         resets = <&r_ccu RST_R_APB2_I2C>;
649                         pinctrl-names = "default";
650                         pinctrl-0 = <&r_i2c_pins>;
651                         status = "disabled";
652                         #address-cells = <1>;
653                         #size-cells = <0>;
654                 };
655         };
656 };