arch/arm/dts/rk3399-roc-pc.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
   4  */
   5
   6 /dts-v1/;
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         model = "Firefly ROC-RK3399-PC Board";
  14         compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
  15
  16         chosen {
  17                 stdout-path = "serial2:1500000n8";
  18         };
  19
  20         backlight: backlight {
  21                 compatible = "pwm-backlight";
  22                 pwms = <&pwm0 0 25000 0>;
  23         };
  24
  25         clkin_gmac: external-gmac-clock {
  26                 compatible = "fixed-clock";
  27                 clock-frequency = <125000000>;
  28                 clock-output-names = "clkin_gmac";
  29                 #clock-cells = <0>;
  30         };
  31
  32         adc-keys {
  33                 compatible = "adc-keys";
  34                 io-channels = <&saradc 1>;
  35                 io-channel-names = "buttons";
  36                 keyup-threshold-microvolt = <1500000>;
  37                 poll-interval = <100>;
  38
  39                 recovery {
  40                         label = "Recovery";
  41                         linux,code = <KEY_VENDOR>;
  42                         press-threshold-microvolt = <18000>;
  43                 };
  44         };
  45
  46         gpio-keys {
  47                 compatible = "gpio-keys";
  48                 autorepeat;
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&pwr_key_l>;
  51
  52                 power {
  53                         debounce-interval = <100>;
  54                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  55                         label = "GPIO Key Power";
  56                         linux,code = <KEY_POWER>;
  57                         wakeup-source;
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63                 pinctrl-names = "default";
  64                 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
  65
  66                 work-led {
  67                         label = "green:work";
  68                         gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
  69                         default-state = "on";
  70                         linux,default-trigger = "heartbeat";
  71                 };
  72
  73                 diy-led {
  74                         label = "red:diy";
  75                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
  76                         default-state = "off";
  77                         linux,default-trigger = "mmc1";
  78                 };
  79
  80                 yellow-led {
  81                         label = "yellow:yellow-led";
  82                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  83                         default-state = "off";
  84                         linux,default-trigger = "mmc0";
  85                 };
  86         };
  87
  88         sdio_pwrseq: sdio-pwrseq {
  89                 compatible = "mmc-pwrseq-simple";
  90                 clocks = <&rk808 1>;
  91                 clock-names = "ext_clock";
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&wifi_enable_h>;
  94
  95                 /*
  96                  * On the module itself this is one of these (depending
  97                  * on the actual card populated):
  98                  * - SDIO_RESET_L_WL_REG_ON
  99                  * - PDN (power down when low)
 100                  */
 101                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 102         };
 103
 104         vcc_vbus_typec0: vcc-vbus-typec0 {
 105                 compatible = "regulator-fixed";
 106                 regulator-name = "vcc_vbus_typec0";
 107                 regulator-always-on;
 108                 regulator-boot-on;
 109                 regulator-min-microvolt = <5000000>;
 110                 regulator-max-microvolt = <5000000>;
 111         };
 112
 113         /* switched by pmic_sleep */
 114         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 115                 compatible = "regulator-fixed";
 116                 regulator-name = "vcc1v8_s3";
 117                 regulator-always-on;
 118                 regulator-boot-on;
 119                 regulator-min-microvolt = <1800000>;
 120                 regulator-max-microvolt = <1800000>;
 121                 vin-supply = <&vcc_1v8>;
 122         };
 123
 124         vcc3v0_sd: vcc3v0-sd {
 125                 compatible = "regulator-fixed";
 126                 enable-active-high;
 127                 gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
 128                 pinctrl-names = "default";
 129                 pinctrl-0 = <&vcc3v0_sd_en>;
 130                 regulator-name = "vcc3v0_sd";
 131                 regulator-boot-on;
 132                 regulator-min-microvolt = <3000000>;
 133                 regulator-max-microvolt = <3000000>;
 134                 vin-supply = <&vcc3v3_sys>;
 135         };
 136
 137         vcc3v3_sys: vcc3v3-sys {
 138                 compatible = "regulator-fixed";
 139                 regulator-name = "vcc3v3_sys";
 140                 regulator-always-on;
 141                 regulator-boot-on;
 142                 regulator-min-microvolt = <3300000>;
 143                 regulator-max-microvolt = <3300000>;
 144                 vin-supply = <&dc_12v>;
 145         };
 146
 147         vcca_0v9: vcca-0v9 {
 148                 compatible = "regulator-fixed";
 149                 regulator-name = "vcca_0v9";
 150                 regulator-always-on;
 151                 regulator-boot-on;
 152                 regulator-min-microvolt = <900000>;
 153                 regulator-max-microvolt = <900000>;
 154                 vin-supply = <&vcc3v3_sys>;
 155         };
 156
 157         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 158         vcc5v0_host: vcc5v0-host-regulator {
 159                 compatible = "regulator-fixed";
 160                 enable-active-high;
 161                 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 162                 pinctrl-names = "default";
 163                 pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
 164                 regulator-name = "vcc5v0_host";
 165                 vin-supply = <&vcc_sys>;
 166         };
 167
 168         vcc_vbus_typec1: vcc-vbus-typec1 {
 169                 compatible = "regulator-fixed";
 170                 enable-active-high;
 171                 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 172                 pinctrl-names = "default";
 173                 pinctrl-0 = <&vcc_vbus_typec1_en>;
 174                 regulator-name = "vcc_vbus_typec1";
 175                 regulator-always-on;
 176                 vin-supply = <&vcc_sys>;
 177         };
 178
 179         vcc_sys: vcc-sys {
 180                 compatible = "regulator-fixed";
 181                 enable-active-high;
 182                 gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
 183                 pinctrl-names = "default";
 184                 pinctrl-0 = <&vcc_sys_en>;
 185                 regulator-name = "vcc_sys";
 186                 regulator-boot-on;
 187                 regulator-min-microvolt = <5000000>;
 188                 regulator-max-microvolt = <5000000>;
 189                 vin-supply = <&dc_12v>;
 190         };
 191
 192         vdd_log: vdd-log {
 193                 compatible = "pwm-regulator";
 194                 pwms = <&pwm2 0 25000 1>;
 195                 regulator-name = "vdd_log";
 196                 regulator-always-on;
 197                 regulator-boot-on;
 198                 regulator-min-microvolt = <450000>;
 199                 regulator-max-microvolt = <1400000>;
 200                 pwm-supply = <&vcc3v3_sys>;
 201         };
 202 };
 203
 204 &cpu_l0 {
 205         cpu-supply = <&vdd_cpu_l>;
 206 };
 207
 208 &cpu_l1 {
 209         cpu-supply = <&vdd_cpu_l>;
 210 };
 211
 212 &cpu_l2 {
 213         cpu-supply = <&vdd_cpu_l>;
 214 };
 215
 216 &cpu_l3 {
 217         cpu-supply = <&vdd_cpu_l>;
 218 };
 219
 220 &cpu_b0 {
 221         cpu-supply = <&vdd_cpu_b>;
 222 };
 223
 224 &cpu_b1 {
 225         cpu-supply = <&vdd_cpu_b>;
 226 };
 227
 228 &emmc_phy {
 229         status = "okay";
 230 };
 231
 232 &gmac {
 233         assigned-clocks = <&cru SCLK_RMII_SRC>;
 234         assigned-clock-parents = <&clkin_gmac>;
 235         clock_in_out = "input";
 236         phy-supply = <&vcc_lan>;
 237         phy-mode = "rgmii";
 238         pinctrl-names = "default";
 239         pinctrl-0 = <&rgmii_pins>;
 240         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 241         snps,reset-active-low;
 242         snps,reset-delays-us = <0 10000 50000>;
 243         tx_delay = <0x28>;
 244         rx_delay = <0x11>;
 245         status = "okay";
 246 };
 247
 248 &gpu {
 249         mali-supply = <&vdd_gpu>;
 250         status = "okay";
 251 };
 252
 253 &hdmi {
 254         ddc-i2c-bus = <&i2c3>;
 255         pinctrl-names = "default";
 256         pinctrl-0 = <&hdmi_cec>;
 257         status = "okay";
 258 };
 259
 260 &hdmi_sound {
 261         status = "okay";
 262 };
 263
 264 &i2c0 {
 265         clock-frequency = <400000>;
 266         i2c-scl-rising-time-ns = <168>;
 267         i2c-scl-falling-time-ns = <4>;
 268         status = "okay";
 269
 270         rk808: pmic@1b {
 271                 compatible = "rockchip,rk808";
 272                 reg = <0x1b>;
 273                 interrupt-parent = <&gpio1>;
 274                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 275                 #clock-cells = <1>;
 276                 clock-output-names = "xin32k", "rk808-clkout2";
 277                 pinctrl-names = "default";
 278                 pinctrl-0 = <&pmic_int_l>;
 279                 rockchip,system-power-controller;
 280                 wakeup-source;
 281
 282                 vcc1-supply = <&vcc3v3_sys>;
 283                 vcc2-supply = <&vcc3v3_sys>;
 284                 vcc3-supply = <&vcc3v3_sys>;
 285                 vcc4-supply = <&vcc3v3_sys>;
 286                 vcc6-supply = <&vcc3v3_sys>;
 287                 vcc7-supply = <&vcc3v3_sys>;
 288                 vcc8-supply = <&vcc3v3_sys>;
 289                 vcc9-supply = <&vcc3v3_sys>;
 290                 vcc10-supply = <&vcc3v3_sys>;
 291                 vcc11-supply = <&vcc3v3_sys>;
 292                 vcc12-supply = <&vcc3v3_sys>;
 293                 vcc13-supply = <&vcc3v3_sys>;
 294                 vcc14-supply = <&vcc3v3_sys>;
 295                 vddio-supply = <&vcc_3v0>;
 296
 297                 regulators {
 298                         vdd_center: DCDC_REG1 {
 299                                 regulator-name = "vdd_center";
 300                                 regulator-always-on;
 301                                 regulator-boot-on;
 302                                 regulator-min-microvolt = <750000>;
 303                                 regulator-max-microvolt = <1350000>;
 304                                 regulator-ramp-delay = <6001>;
 305                                 regulator-state-mem {
 306                                         regulator-off-in-suspend;
 307                                 };
 308                         };
 309
 310                         vdd_cpu_l: DCDC_REG2 {
 311                                 regulator-name = "vdd_cpu_l";
 312                                 regulator-always-on;
 313                                 regulator-boot-on;
 314                                 regulator-min-microvolt = <750000>;
 315                                 regulator-max-microvolt = <1350000>;
 316                                 regulator-ramp-delay = <6001>;
 317                                 regulator-state-mem {
 318                                         regulator-off-in-suspend;
 319                                 };
 320                         };
 321
 322                         vcc_ddr: DCDC_REG3 {
 323                                 regulator-name = "vcc_ddr";
 324                                 regulator-always-on;
 325                                 regulator-boot-on;
 326                                 regulator-state-mem {
 327                                         regulator-on-in-suspend;
 328                                 };
 329                         };
 330
 331                         vcc_1v8: DCDC_REG4 {
 332                                 regulator-name = "vcc_1v8";
 333                                 regulator-always-on;
 334                                 regulator-boot-on;
 335                                 regulator-min-microvolt = <1800000>;
 336                                 regulator-max-microvolt = <1800000>;
 337                                 regulator-state-mem {
 338                                         regulator-on-in-suspend;
 339                                         regulator-suspend-microvolt = <1800000>;
 340                                 };
 341                         };
 342
 343                         vcca1v8_codec: LDO_REG1 {
 344                                 regulator-name = "vcca1v8_codec";
 345                                 regulator-always-on;
 346                                 regulator-boot-on;
 347                                 regulator-min-microvolt = <1800000>;
 348                                 regulator-max-microvolt = <1800000>;
 349                                 regulator-state-mem {
 350                                         regulator-off-in-suspend;
 351                                 };
 352                         };
 353
 354                         vcc1v8_hdmi: LDO_REG2 {
 355                                 regulator-name = "vcc1v8_hdmi";
 356                                 regulator-always-on;
 357                                 regulator-boot-on;
 358                                 regulator-min-microvolt = <1800000>;
 359                                 regulator-max-microvolt = <1800000>;
 360                                 regulator-state-mem {
 361                                         regulator-off-in-suspend;
 362                                 };
 363                         };
 364
 365                         vcc1v8_pmu: LDO_REG3 {
 366                                 regulator-name = "vcc1v8_pmu";
 367                                 regulator-always-on;
 368                                 regulator-boot-on;
 369                                 regulator-min-microvolt = <1800000>;
 370                                 regulator-max-microvolt = <1800000>;
 371                                 regulator-state-mem {
 372                                         regulator-on-in-suspend;
 373                                         regulator-suspend-microvolt = <1800000>;
 374                                 };
 375                         };
 376
 377                         vcc_sdio: LDO_REG4 {
 378                                 regulator-name = "vcc_sdio";
 379                                 regulator-boot-on;
 380                                 regulator-min-microvolt = <1800000>;
 381                                 regulator-max-microvolt = <3000000>;
 382                                 regulator-state-mem {
 383                                         regulator-on-in-suspend;
 384                                         regulator-suspend-microvolt = <3000000>;
 385                                 };
 386                         };
 387
 388                         vcca3v0_codec: LDO_REG5 {
 389                                 regulator-name = "vcca3v0_codec";
 390                                 regulator-always-on;
 391                                 regulator-boot-on;
 392                                 regulator-min-microvolt = <3000000>;
 393                                 regulator-max-microvolt = <3000000>;
 394                                 regulator-state-mem {
 395                                         regulator-off-in-suspend;
 396                                 };
 397                         };
 398
 399                         vcc_1v5: LDO_REG6 {
 400                                 regulator-name = "vcc_1v5";
 401                                 regulator-always-on;
 402                                 regulator-boot-on;
 403                                 regulator-min-microvolt = <1500000>;
 404                                 regulator-max-microvolt = <1500000>;
 405                                 regulator-state-mem {
 406                                         regulator-on-in-suspend;
 407                                         regulator-suspend-microvolt = <1500000>;
 408                                 };
 409                         };
 410
 411                         vcca0v9_hdmi: LDO_REG7 {
 412                                 regulator-name = "vcca0v9_hdmi";
 413                                 regulator-always-on;
 414                                 regulator-boot-on;
 415                                 regulator-min-microvolt = <900000>;
 416                                 regulator-max-microvolt = <900000>;
 417                                 regulator-state-mem {
 418                                         regulator-off-in-suspend;
 419                                 };
 420                         };
 421
 422                         vcc_3v0: LDO_REG8 {
 423                                 regulator-name = "vcc_3v0";
 424                                 regulator-always-on;
 425                                 regulator-boot-on;
 426                                 regulator-min-microvolt = <3000000>;
 427                                 regulator-max-microvolt = <3000000>;
 428                                 regulator-state-mem {
 429                                         regulator-on-in-suspend;
 430                                         regulator-suspend-microvolt = <3000000>;
 431                                 };
 432                         };
 433
 434                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 435                                 regulator-name = "vcc3v3_s3";
 436                                 regulator-always-on;
 437                                 regulator-boot-on;
 438                                 regulator-state-mem {
 439                                         regulator-off-in-suspend;
 440                                 };
 441                         };
 442
 443                         vcc3v3_s0: SWITCH_REG2 {
 444                                 regulator-name = "vcc3v3_s0";
 445                                 regulator-always-on;
 446                                 regulator-boot-on;
 447                                 regulator-state-mem {
 448                                         regulator-off-in-suspend;
 449                                 };
 450                         };
 451                 };
 452         };
 453
 454         vdd_cpu_b: regulator@40 {
 455                 compatible = "silergy,syr827";
 456                 reg = <0x40>;
 457                 fcs,suspend-voltage-selector = <1>;
 458                 pinctrl-names = "default";
 459                 pinctrl-0 = <&vsel1_gpio>;
 460                 regulator-name = "vdd_cpu_b";
 461                 regulator-min-microvolt = <712500>;
 462                 regulator-max-microvolt = <1500000>;
 463                 regulator-ramp-delay = <1000>;
 464                 regulator-always-on;
 465                 regulator-boot-on;
 466                 vin-supply = <&vcc3v3_sys>;
 467
 468                 regulator-state-mem {
 469                         regulator-off-in-suspend;
 470                 };
 471         };
 472
 473         vdd_gpu: regulator@41 {
 474                 compatible = "silergy,syr828";
 475                 reg = <0x41>;
 476                 fcs,suspend-voltage-selector = <1>;
 477                 pinctrl-names = "default";
 478                 pinctrl-0 = <&vsel2_gpio>;
 479                 regulator-name = "vdd_gpu";
 480                 regulator-min-microvolt = <712500>;
 481                 regulator-max-microvolt = <1500000>;
 482                 regulator-ramp-delay = <1000>;
 483                 vin-supply = <&vcc3v3_sys>;
 484
 485                 regulator-state-mem {
 486                         regulator-off-in-suspend;
 487                 };
 488         };
 489 };
 490
 491 &i2c1 {
 492         i2c-scl-rising-time-ns = <300>;
 493         i2c-scl-falling-time-ns = <15>;
 494         status = "okay";
 495 };
 496
 497 &i2c3 {
 498         i2c-scl-rising-time-ns = <450>;
 499         i2c-scl-falling-time-ns = <15>;
 500         status = "okay";
 501 };
 502
 503 &i2c4 {
 504         i2c-scl-rising-time-ns = <600>;
 505         i2c-scl-falling-time-ns = <20>;
 506         status = "okay";
 507
 508         fusb1: usb-typec@22 {
 509                 compatible = "fcs,fusb302";
 510                 reg = <0x22>;
 511                 interrupt-parent = <&gpio1>;
 512                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 513                 pinctrl-names = "default";
 514                 pinctrl-0 = <&fusb1_int>;
 515                 vbus-supply = <&vcc_vbus_typec1>;
 516                 status = "okay";
 517         };
 518 };
 519
 520 &i2c7 {
 521         i2c-scl-rising-time-ns = <600>;
 522         i2c-scl-falling-time-ns = <20>;
 523         status = "okay";
 524
 525         fusb0: usb-typec@22 {
 526                 compatible = "fcs,fusb302";
 527                 reg = <0x22>;
 528                 interrupt-parent = <&gpio1>;
 529                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 530                 pinctrl-names = "default";
 531                 pinctrl-0 = <&fusb0_int>;
 532                 vbus-supply = <&vcc_vbus_typec0>;
 533                 status = "okay";
 534         };
 535
 536         mp8859: regulator@66 {
 537                 compatible = "mps,mp8859";
 538                 reg = <0x66>;
 539                 dc_12v: mp8859_dcdc {
 540                         regulator-name = "dc_12v";
 541                         regulator-min-microvolt = <12000000>;
 542                         regulator-max-microvolt = <12000000>;
 543                         regulator-always-on;
 544                         regulator-boot-on;
 545                         vin-supply = <&vcc_vbus_typec0>;
 546
 547                         regulator-state-mem {
 548                                 regulator-on-in-suspend;
 549                                 regulator-suspend-microvolt = <12000000>;
 550                         };
 551                 };
 552         };
 553 };
 554
 555 &i2s0 {
 556         rockchip,playback-channels = <8>;
 557         rockchip,capture-channels = <8>;
 558         status = "okay";
 559 };
 560
 561 &i2s1 {
 562         rockchip,playback-channels = <2>;
 563         rockchip,capture-channels = <2>;
 564         status = "okay";
 565 };
 566
 567 &i2s2 {
 568         status = "okay";
 569 };
 570
 571 &io_domains {
 572         audio-supply = <&vcca1v8_codec>;
 573         bt656-supply = <&vcc_3v0>;
 574         gpio1830-supply = <&vcc_3v0>;
 575         sdmmc-supply = <&vcc_sdio>;
 576         status = "okay";
 577 };
 578
 579 &pmu_io_domains {
 580         pmu1830-supply = <&vcc_3v0>;
 581         status = "okay";
 582 };
 583
 584 &pinctrl {
 585         buttons {
 586                 pwr_key_l: pwr-key-l {
 587                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 588                 };
 589         };
 590
 591         lcd-panel {
 592                 lcd_panel_reset: lcd-panel-reset {
 593                         rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 594                 };
 595         };
 596
 597         leds {
 598                 diy_led_gpio: diy_led-gpio {
 599                         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 600                 };
 601
 602                 work_led_gpio: work_led-gpio {
 603                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 604                 };
 605
 606                 yellow_led_gpio: yellow_led-gpio {
 607                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 608                 };
 609         };
 610
 611         pmic {
 612                 vsel1_gpio: vsel1-gpio {
 613                         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 614                 };
 615
 616                 vsel2_gpio: vsel2-gpio {
 617                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 618                 };
 619         };
 620
 621         sdio-pwrseq {
 622                 wifi_enable_h: wifi-enable-h {
 623                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 624                 };
 625         };
 626
 627         sdmmc {
 628                 vcc3v0_sd_en: vcc3v0-sd-en {
 629                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 630                 };
 631         };
 632
 633         pmic {
 634                 pmic_int_l: pmic-int-l {
 635                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 636                 };
 637         };
 638
 639         usb2 {
 640                 vcc5v0_host_en: vcc5v0-host-en {
 641                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 642                 };
 643
 644                 vcc_sys_en: vcc-sys-en {
 645                         rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 646                 };
 647
 648                 hub_rst: hub-rst {
 649                         rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
 650                 };
 651         };
 652
 653         usb-typec {
 654                 vcc_vbus_typec1_en: vcc-vbus-typec1-en {
 655                         rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 656                 };
 657         };
 658
 659         fusb30x {
 660                 fusb0_int: fusb0-int {
 661                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 662                 };
 663
 664                 fusb1_int: fusb1-int {
 665                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 666                 };
 667         };
 668 };
 669
 670 &pwm0 {
 671         status = "okay";
 672 };
 673
 674 &pwm2 {
 675         status = "okay";
 676 };
 677
 678 &saradc {
 679         vref-supply = <&vcca1v8_s3>;
 680         status = "okay";
 681 };
 682
 683 &sdmmc {
 684         bus-width = <4>;
 685         cap-sd-highspeed;
 686         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 687         disable-wp;
 688         max-frequency = <150000000>;
 689         pinctrl-names = "default";
 690         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 691         sd-uhs-sdr104;
 692         vmmc-supply = <&vcc3v0_sd>;
 693         vqmmc-supply = <&vcc_sdio>;
 694         status = "okay";
 695 };
 696
 697 &sdhci {
 698         bus-width = <8>;
 699         non-removable;
 700         status = "okay";
 701 };
 702
 703 &spi1 {
 704         status = "okay";
 705
 706         flash@0 {
 707                 compatible = "jedec,spi-nor";
 708                 reg = <0>;
 709                 spi-max-frequency = <10000000>;
 710         };
 711 };
 712
 713 &tcphy0 {
 714         status = "okay";
 715 };
 716
 717 &tcphy1 {
 718         status = "okay";
 719 };
 720
 721 &tsadc {
 722         /* tshut mode 0:CRU 1:GPIO */
 723         rockchip,hw-tshut-mode = <1>;
 724         /* tshut polarity 0:LOW 1:HIGH */
 725         rockchip,hw-tshut-polarity = <1>;
 726         status = "okay";
 727 };
 728
 729 &u2phy0 {
 730         status = "okay";
 731
 732         u2phy0_otg: otg-port {
 733                 phy-supply = <&vcc_vbus_typec0>;
 734                 status = "okay";
 735         };
 736
 737         u2phy0_host: host-port {
 738                 phy-supply = <&vcc5v0_host>;
 739                 status = "okay";
 740         };
 741 };
 742
 743 &u2phy1 {
 744         status = "okay";
 745
 746         u2phy1_otg: otg-port {
 747                 phy-supply = <&vcc_vbus_typec1>;
 748                 status = "okay";
 749         };
 750
 751         u2phy1_host: host-port {
 752                 phy-supply = <&vcc5v0_host>;
 753                 status = "okay";
 754         };
 755 };
 756
 757 &uart0 {
 758         pinctrl-names = "default";
 759         pinctrl-0 = <&uart0_xfer &uart0_cts>;
 760         status = "okay";
 761 };
 762
 763 &uart2 {
 764         status = "okay";
 765 };
 766
 767 &usb_host0_ehci {
 768         status = "okay";
 769 };
 770
 771 &usb_host0_ohci {
 772         status = "okay";
 773 };
 774
 775 &usb_host1_ehci {
 776         status = "okay";
 777 };
 778
 779 &usb_host1_ohci {
 780         status = "okay";
 781 };
 782
 783 &usbdrd3_0 {
 784         status = "okay";
 785 };
 786
 787 &usbdrd_dwc3_0 {
 788         status = "okay";
 789 };
 790
 791 &usbdrd3_1 {
 792         status = "okay";
 793 };
 794
 795 &usbdrd_dwc3_1 {
 796         status = "okay";
 797         dr_mode = "host";
 798 };
 799
 800 &vopb {
 801         status = "okay";
 802 };
 803
 804 &vopb_mmu {
 805         status = "okay";
 806 };
 807
 808 &vopl {
 809         status = "okay";
 810 };
 811
 812 &vopl_mmu {
 813         status = "okay";
 814 };