arch/arm/dts/rk3399-roc-pc.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
   4  */
   5
   6 /dts-v1/;
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         model = "Firefly ROC-RK3399-PC Board";
  14         compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
  15
  16         chosen {
  17                 stdout-path = "serial2:1500000n8";
  18         };
  19
  20         backlight: backlight {
  21                 compatible = "pwm-backlight";
  22                 pwms = <&pwm0 0 25000 0>;
  23         };
  24
  25         clkin_gmac: external-gmac-clock {
  26                 compatible = "fixed-clock";
  27                 clock-frequency = <125000000>;
  28                 clock-output-names = "clkin_gmac";
  29                 #clock-cells = <0>;
  30         };
  31
  32         adc-keys {
  33                 compatible = "adc-keys";
  34                 io-channels = <&saradc 1>;
  35                 io-channel-names = "buttons";
  36                 keyup-threshold-microvolt = <1500000>;
  37                 poll-interval = <100>;
  38
  39                 recovery {
  40                         label = "Recovery";
  41                         linux,code = <KEY_VENDOR>;
  42                         press-threshold-microvolt = <18000>;
  43                 };
  44         };
  45
  46         gpio-keys {
  47                 compatible = "gpio-keys";
  48                 autorepeat;
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&pwr_key_l>;
  51
  52                 power {
  53                         debounce-interval = <100>;
  54                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  55                         label = "GPIO Key Power";
  56                         linux,code = <KEY_POWER>;
  57                         wakeup-source;
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63                 pinctrl-names = "default";
  64                 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
  65
  66                 work-led {
  67                         label = "green:work";
  68                         gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
  69                         default-state = "on";
  70                         linux,default-trigger = "heartbeat";
  71                 };
  72
  73                 diy-led {
  74                         label = "red:diy";
  75                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
  76                         default-state = "off";
  77                         linux,default-trigger = "mmc1";
  78                 };
  79
  80                 yellow-led {
  81                         label = "yellow:yellow-led";
  82                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  83                         default-state = "off";
  84                         linux,default-trigger = "mmc0";
  85                 };
  86         };
  87
  88         sdio_pwrseq: sdio-pwrseq {
  89                 compatible = "mmc-pwrseq-simple";
  90                 clocks = <&rk808 1>;
  91                 clock-names = "ext_clock";
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&wifi_enable_h>;
  94
  95                 /*
  96                  * On the module itself this is one of these (depending
  97                  * on the actual card populated):
  98                  * - SDIO_RESET_L_WL_REG_ON
  99                  * - PDN (power down when low)
 100                  */
 101                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 102         };
 103
 104         vcc_vbus_typec0: vcc-vbus-typec0 {
 105                 compatible = "regulator-fixed";
 106                 regulator-name = "vcc_vbus_typec0";
 107                 regulator-always-on;
 108                 regulator-boot-on;
 109                 regulator-min-microvolt = <5000000>;
 110                 regulator-max-microvolt = <5000000>;
 111         };
 112
 113         /*
 114          * should be placed inside mp8859, but not until mp8859 has
 115          * its own dt-binding.
 116          */
 117         dc_12v: mp8859-dcdc1 {
 118                 compatible = "regulator-fixed";
 119                 regulator-name = "dc_12v";
 120                 regulator-always-on;
 121                 regulator-boot-on;
 122                 regulator-min-microvolt = <12000000>;
 123                 regulator-max-microvolt = <12000000>;
 124                 vin-supply = <&vcc_vbus_typec0>;
 125         };
 126
 127         /* switched by pmic_sleep */
 128         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 129                 compatible = "regulator-fixed";
 130                 regulator-name = "vcc1v8_s3";
 131                 regulator-always-on;
 132                 regulator-boot-on;
 133                 regulator-min-microvolt = <1800000>;
 134                 regulator-max-microvolt = <1800000>;
 135                 vin-supply = <&vcc_1v8>;
 136         };
 137
 138         vcc3v0_sd: vcc3v0-sd {
 139                 compatible = "regulator-fixed";
 140                 enable-active-high;
 141                 gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&vcc3v0_sd_en>;
 144                 regulator-name = "vcc3v0_sd";
 145                 regulator-boot-on;
 146                 regulator-min-microvolt = <3000000>;
 147                 regulator-max-microvolt = <3000000>;
 148                 vin-supply = <&vcc3v3_sys>;
 149         };
 150
 151         vcc3v3_sys: vcc3v3-sys {
 152                 compatible = "regulator-fixed";
 153                 regulator-name = "vcc3v3_sys";
 154                 regulator-always-on;
 155                 regulator-boot-on;
 156                 regulator-min-microvolt = <3300000>;
 157                 regulator-max-microvolt = <3300000>;
 158                 vin-supply = <&dc_12v>;
 159         };
 160
 161         vcca_0v9: vcca-0v9 {
 162                 compatible = "regulator-fixed";
 163                 regulator-name = "vcca_0v9";
 164                 regulator-always-on;
 165                 regulator-boot-on;
 166                 regulator-min-microvolt = <900000>;
 167                 regulator-max-microvolt = <900000>;
 168                 vin-supply = <&vcc3v3_sys>;
 169         };
 170
 171         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 172         vcc5v0_host: vcc5v0-host-regulator {
 173                 compatible = "regulator-fixed";
 174                 enable-active-high;
 175                 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 176                 pinctrl-names = "default";
 177                 pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
 178                 regulator-name = "vcc5v0_host";
 179                 regulator-always-on;
 180                 vin-supply = <&vcc_sys>;
 181         };
 182
 183         vcc_vbus_typec1: vcc-vbus-typec1 {
 184                 compatible = "regulator-fixed";
 185                 enable-active-high;
 186                 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 187                 pinctrl-names = "default";
 188                 pinctrl-0 = <&vcc_vbus_typec1_en>;
 189                 regulator-name = "vcc_vbus_typec1";
 190                 regulator-always-on;
 191                 vin-supply = <&vcc_sys>;
 192         };
 193
 194         vcc_sys: vcc-sys {
 195                 compatible = "regulator-fixed";
 196                 enable-active-high;
 197                 gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
 198                 pinctrl-names = "default";
 199                 pinctrl-0 = <&vcc_sys_en>;
 200                 regulator-name = "vcc_sys";
 201                 regulator-always-on;
 202                 regulator-boot-on;
 203                 regulator-min-microvolt = <5000000>;
 204                 regulator-max-microvolt = <5000000>;
 205                 vin-supply = <&dc_12v>;
 206         };
 207
 208         vdd_log: vdd-log {
 209                 compatible = "pwm-regulator";
 210                 pwms = <&pwm2 0 25000 1>;
 211                 regulator-name = "vdd_log";
 212                 regulator-always-on;
 213                 regulator-boot-on;
 214                 regulator-min-microvolt = <450000>;
 215                 regulator-max-microvolt = <1400000>;
 216                 pwm-supply = <&vcc3v3_sys>;
 217         };
 218 };
 219
 220 &cpu_l0 {
 221         cpu-supply = <&vdd_cpu_l>;
 222 };
 223
 224 &cpu_l1 {
 225         cpu-supply = <&vdd_cpu_l>;
 226 };
 227
 228 &cpu_l2 {
 229         cpu-supply = <&vdd_cpu_l>;
 230 };
 231
 232 &cpu_l3 {
 233         cpu-supply = <&vdd_cpu_l>;
 234 };
 235
 236 &cpu_b0 {
 237         cpu-supply = <&vdd_cpu_b>;
 238 };
 239
 240 &cpu_b1 {
 241         cpu-supply = <&vdd_cpu_b>;
 242 };
 243
 244 &emmc_phy {
 245         status = "okay";
 246 };
 247
 248 &gmac {
 249         assigned-clocks = <&cru SCLK_RMII_SRC>;
 250         assigned-clock-parents = <&clkin_gmac>;
 251         clock_in_out = "input";
 252         phy-supply = <&vcc_lan>;
 253         phy-mode = "rgmii";
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&rgmii_pins>;
 256         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 257         snps,reset-active-low;
 258         snps,reset-delays-us = <0 10000 50000>;
 259         tx_delay = <0x28>;
 260         rx_delay = <0x11>;
 261         status = "okay";
 262 };
 263
 264 &gpu {
 265         mali-supply = <&vdd_gpu>;
 266         status = "okay";
 267 };
 268
 269 &hdmi {
 270         ddc-i2c-bus = <&i2c3>;
 271         pinctrl-names = "default";
 272         pinctrl-0 = <&hdmi_cec>;
 273         status = "okay";
 274 };
 275
 276 &hdmi_sound {
 277         status = "okay";
 278 };
 279
 280 &i2c0 {
 281         clock-frequency = <400000>;
 282         i2c-scl-rising-time-ns = <168>;
 283         i2c-scl-falling-time-ns = <4>;
 284         status = "okay";
 285
 286         rk808: pmic@1b {
 287                 compatible = "rockchip,rk808";
 288                 reg = <0x1b>;
 289                 interrupt-parent = <&gpio1>;
 290                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 291                 #clock-cells = <1>;
 292                 clock-output-names = "xin32k", "rk808-clkout2";
 293                 pinctrl-names = "default";
 294                 pinctrl-0 = <&pmic_int_l>;
 295                 rockchip,system-power-controller;
 296                 wakeup-source;
 297
 298                 vcc1-supply = <&vcc3v3_sys>;
 299                 vcc2-supply = <&vcc3v3_sys>;
 300                 vcc3-supply = <&vcc3v3_sys>;
 301                 vcc4-supply = <&vcc3v3_sys>;
 302                 vcc6-supply = <&vcc3v3_sys>;
 303                 vcc7-supply = <&vcc3v3_sys>;
 304                 vcc8-supply = <&vcc3v3_sys>;
 305                 vcc9-supply = <&vcc3v3_sys>;
 306                 vcc10-supply = <&vcc3v3_sys>;
 307                 vcc11-supply = <&vcc3v3_sys>;
 308                 vcc12-supply = <&vcc3v3_sys>;
 309                 vcc13-supply = <&vcc3v3_sys>;
 310                 vcc14-supply = <&vcc3v3_sys>;
 311                 vddio-supply = <&vcc_3v0>;
 312
 313                 regulators {
 314                         vdd_center: DCDC_REG1 {
 315                                 regulator-name = "vdd_center";
 316                                 regulator-always-on;
 317                                 regulator-boot-on;
 318                                 regulator-min-microvolt = <750000>;
 319                                 regulator-max-microvolt = <1350000>;
 320                                 regulator-ramp-delay = <6001>;
 321                                 regulator-state-mem {
 322                                         regulator-off-in-suspend;
 323                                 };
 324                         };
 325
 326                         vdd_cpu_l: DCDC_REG2 {
 327                                 regulator-name = "vdd_cpu_l";
 328                                 regulator-always-on;
 329                                 regulator-boot-on;
 330                                 regulator-min-microvolt = <750000>;
 331                                 regulator-max-microvolt = <1350000>;
 332                                 regulator-ramp-delay = <6001>;
 333                                 regulator-state-mem {
 334                                         regulator-off-in-suspend;
 335                                 };
 336                         };
 337
 338                         vcc_ddr: DCDC_REG3 {
 339                                 regulator-name = "vcc_ddr";
 340                                 regulator-always-on;
 341                                 regulator-boot-on;
 342                                 regulator-state-mem {
 343                                         regulator-on-in-suspend;
 344                                 };
 345                         };
 346
 347                         vcc_1v8: DCDC_REG4 {
 348                                 regulator-name = "vcc_1v8";
 349                                 regulator-always-on;
 350                                 regulator-boot-on;
 351                                 regulator-min-microvolt = <1800000>;
 352                                 regulator-max-microvolt = <1800000>;
 353                                 regulator-state-mem {
 354                                         regulator-on-in-suspend;
 355                                         regulator-suspend-microvolt = <1800000>;
 356                                 };
 357                         };
 358
 359                         vcca1v8_codec: LDO_REG1 {
 360                                 regulator-name = "vcca1v8_codec";
 361                                 regulator-always-on;
 362                                 regulator-boot-on;
 363                                 regulator-min-microvolt = <1800000>;
 364                                 regulator-max-microvolt = <1800000>;
 365                                 regulator-state-mem {
 366                                         regulator-off-in-suspend;
 367                                 };
 368                         };
 369
 370                         vcc1v8_hdmi: LDO_REG2 {
 371                                 regulator-name = "vcc1v8_hdmi";
 372                                 regulator-always-on;
 373                                 regulator-boot-on;
 374                                 regulator-min-microvolt = <1800000>;
 375                                 regulator-max-microvolt = <1800000>;
 376                                 regulator-state-mem {
 377                                         regulator-off-in-suspend;
 378                                 };
 379                         };
 380
 381                         vcc1v8_pmu: LDO_REG3 {
 382                                 regulator-name = "vcc1v8_pmu";
 383                                 regulator-always-on;
 384                                 regulator-boot-on;
 385                                 regulator-min-microvolt = <1800000>;
 386                                 regulator-max-microvolt = <1800000>;
 387                                 regulator-state-mem {
 388                                         regulator-on-in-suspend;
 389                                         regulator-suspend-microvolt = <1800000>;
 390                                 };
 391                         };
 392
 393                         vcc_sdio: LDO_REG4 {
 394                                 regulator-name = "vcc_sdio";
 395                                 regulator-always-on;
 396                                 regulator-boot-on;
 397                                 regulator-min-microvolt = <1800000>;
 398                                 regulator-max-microvolt = <3000000>;
 399                                 regulator-state-mem {
 400                                         regulator-on-in-suspend;
 401                                         regulator-suspend-microvolt = <3000000>;
 402                                 };
 403                         };
 404
 405                         vcca3v0_codec: LDO_REG5 {
 406                                 regulator-name = "vcca3v0_codec";
 407                                 regulator-always-on;
 408                                 regulator-boot-on;
 409                                 regulator-min-microvolt = <3000000>;
 410                                 regulator-max-microvolt = <3000000>;
 411                                 regulator-state-mem {
 412                                         regulator-off-in-suspend;
 413                                 };
 414                         };
 415
 416                         vcc_1v5: LDO_REG6 {
 417                                 regulator-name = "vcc_1v5";
 418                                 regulator-always-on;
 419                                 regulator-boot-on;
 420                                 regulator-min-microvolt = <1500000>;
 421                                 regulator-max-microvolt = <1500000>;
 422                                 regulator-state-mem {
 423                                         regulator-on-in-suspend;
 424                                         regulator-suspend-microvolt = <1500000>;
 425                                 };
 426                         };
 427
 428                         vcca0v9_hdmi: LDO_REG7 {
 429                                 regulator-name = "vcca0v9_hdmi";
 430                                 regulator-always-on;
 431                                 regulator-boot-on;
 432                                 regulator-min-microvolt = <900000>;
 433                                 regulator-max-microvolt = <900000>;
 434                                 regulator-state-mem {
 435                                         regulator-off-in-suspend;
 436                                 };
 437                         };
 438
 439                         vcc_3v0: LDO_REG8 {
 440                                 regulator-name = "vcc_3v0";
 441                                 regulator-always-on;
 442                                 regulator-boot-on;
 443                                 regulator-min-microvolt = <3000000>;
 444                                 regulator-max-microvolt = <3000000>;
 445                                 regulator-state-mem {
 446                                         regulator-on-in-suspend;
 447                                         regulator-suspend-microvolt = <3000000>;
 448                                 };
 449                         };
 450
 451                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 452                                 regulator-name = "vcc3v3_s3";
 453                                 regulator-always-on;
 454                                 regulator-boot-on;
 455                                 regulator-state-mem {
 456                                         regulator-off-in-suspend;
 457                                 };
 458                         };
 459
 460                         vcc3v3_s0: SWITCH_REG2 {
 461                                 regulator-name = "vcc3v3_s0";
 462                                 regulator-always-on;
 463                                 regulator-boot-on;
 464                                 regulator-state-mem {
 465                                         regulator-off-in-suspend;
 466                                 };
 467                         };
 468                 };
 469         };
 470
 471         vdd_cpu_b: regulator@40 {
 472                 compatible = "silergy,syr827";
 473                 reg = <0x40>;
 474                 fcs,suspend-voltage-selector = <1>;
 475                 pinctrl-names = "default";
 476                 pinctrl-0 = <&vsel1_gpio>;
 477                 regulator-name = "vdd_cpu_b";
 478                 regulator-min-microvolt = <712500>;
 479                 regulator-max-microvolt = <1500000>;
 480                 regulator-ramp-delay = <1000>;
 481                 regulator-always-on;
 482                 regulator-boot-on;
 483                 vin-supply = <&vcc3v3_sys>;
 484
 485                 regulator-state-mem {
 486                         regulator-off-in-suspend;
 487                 };
 488         };
 489
 490         vdd_gpu: regulator@41 {
 491                 compatible = "silergy,syr828";
 492                 reg = <0x41>;
 493                 fcs,suspend-voltage-selector = <1>;
 494                 pinctrl-names = "default";
 495                 pinctrl-0 = <&vsel2_gpio>;
 496                 regulator-name = "vdd_gpu";
 497                 regulator-min-microvolt = <712500>;
 498                 regulator-max-microvolt = <1500000>;
 499                 regulator-ramp-delay = <1000>;
 500                 vin-supply = <&vcc3v3_sys>;
 501
 502                 regulator-state-mem {
 503                         regulator-off-in-suspend;
 504                 };
 505         };
 506 };
 507
 508 &i2c1 {
 509         i2c-scl-rising-time-ns = <300>;
 510         i2c-scl-falling-time-ns = <15>;
 511         status = "okay";
 512 };
 513
 514 &i2c3 {
 515         i2c-scl-rising-time-ns = <450>;
 516         i2c-scl-falling-time-ns = <15>;
 517         status = "okay";
 518 };
 519
 520 &i2c4 {
 521         i2c-scl-rising-time-ns = <600>;
 522         i2c-scl-falling-time-ns = <20>;
 523         status = "okay";
 524
 525         fusb1: usb-typec@22 {
 526                 compatible = "fcs,fusb302";
 527                 reg = <0x22>;
 528                 interrupt-parent = <&gpio1>;
 529                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 530                 pinctrl-names = "default";
 531                 pinctrl-0 = <&fusb1_int>;
 532                 vbus-supply = <&vcc_vbus_typec1>;
 533                 status = "okay";
 534         };
 535 };
 536
 537 &i2c7 {
 538         i2c-scl-rising-time-ns = <600>;
 539         i2c-scl-falling-time-ns = <20>;
 540         status = "okay";
 541
 542         fusb0: usb-typec@22 {
 543                 compatible = "fcs,fusb302";
 544                 reg = <0x22>;
 545                 interrupt-parent = <&gpio1>;
 546                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 547                 pinctrl-names = "default";
 548                 pinctrl-0 = <&fusb0_int>;
 549                 vbus-supply = <&vcc_vbus_typec0>;
 550                 status = "okay";
 551         };
 552 };
 553
 554 &i2s0 {
 555         rockchip,playback-channels = <8>;
 556         rockchip,capture-channels = <8>;
 557         status = "okay";
 558 };
 559
 560 &i2s1 {
 561         rockchip,playback-channels = <2>;
 562         rockchip,capture-channels = <2>;
 563         status = "okay";
 564 };
 565
 566 &i2s2 {
 567         status = "okay";
 568 };
 569
 570 &io_domains {
 571         audio-supply = <&vcca1v8_codec>;
 572         bt656-supply = <&vcc_3v0>;
 573         gpio1830-supply = <&vcc_3v0>;
 574         sdmmc-supply = <&vcc_sdio>;
 575         status = "okay";
 576 };
 577
 578 &pmu_io_domains {
 579         pmu1830-supply = <&vcc_3v0>;
 580         status = "okay";
 581 };
 582
 583 &pinctrl {
 584         buttons {
 585                 pwr_key_l: pwr-key-l {
 586                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 587                 };
 588         };
 589
 590         lcd-panel {
 591                 lcd_panel_reset: lcd-panel-reset {
 592                         rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 593                 };
 594         };
 595
 596         leds {
 597                 diy_led_gpio: diy_led-gpio {
 598                         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 599                 };
 600
 601                 work_led_gpio: work_led-gpio {
 602                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 603                 };
 604
 605                 yellow_led_gpio: yellow_led-gpio {
 606                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 607                 };
 608         };
 609
 610         pmic {
 611                 vsel1_gpio: vsel1-gpio {
 612                         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 613                 };
 614
 615                 vsel2_gpio: vsel2-gpio {
 616                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 617                 };
 618         };
 619
 620         sdio-pwrseq {
 621                 wifi_enable_h: wifi-enable-h {
 622                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 623                 };
 624         };
 625
 626         sdmmc {
 627                 vcc3v0_sd_en: vcc3v0-sd-en {
 628                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 629                 };
 630         };
 631
 632         pmic {
 633                 pmic_int_l: pmic-int-l {
 634                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 635                 };
 636         };
 637
 638         usb2 {
 639                 vcc5v0_host_en: vcc5v0-host-en {
 640                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 641                 };
 642
 643                 vcc_sys_en: vcc-sys-en {
 644                         rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 645                 };
 646
 647                 hub_rst: hub-rst {
 648                         rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
 649                 };
 650         };
 651
 652         usb-typec {
 653                 vcc_vbus_typec1_en: vcc-vbus-typec1-en {
 654                         rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 655                 };
 656         };
 657
 658         fusb30x {
 659                 fusb0_int: fusb0-int {
 660                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 661                 };
 662
 663                 fusb1_int: fusb1-int {
 664                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 665                 };
 666         };
 667 };
 668
 669 &pwm0 {
 670         status = "okay";
 671 };
 672
 673 &pwm2 {
 674         status = "okay";
 675 };
 676
 677 &saradc {
 678         vref-supply = <&vcca1v8_s3>;
 679         status = "okay";
 680 };
 681
 682 &sdmmc {
 683         bus-width = <4>;
 684         cap-sd-highspeed;
 685         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 686         disable-wp;
 687         max-frequency = <150000000>;
 688         pinctrl-names = "default";
 689         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 690         sd-uhs-sdr104;
 691         vmmc-supply = <&vcc3v0_sd>;
 692         vqmmc-supply = <&vcc_sdio>;
 693         status = "okay";
 694 };
 695
 696 &sdhci {
 697         bus-width = <8>;
 698         non-removable;
 699         status = "okay";
 700 };
 701
 702 &spi1 {
 703         status = "okay";
 704
 705         flash@0 {
 706                 compatible = "jedec,spi-nor";
 707                 reg = <0>;
 708                 spi-max-frequency = <10000000>;
 709         };
 710 };
 711
 712 &tcphy0 {
 713         status = "okay";
 714 };
 715
 716 &tcphy1 {
 717         status = "okay";
 718 };
 719
 720 &tsadc {
 721         /* tshut mode 0:CRU 1:GPIO */
 722         rockchip,hw-tshut-mode = <1>;
 723         /* tshut polarity 0:LOW 1:HIGH */
 724         rockchip,hw-tshut-polarity = <1>;
 725         status = "okay";
 726 };
 727
 728 &u2phy0 {
 729         status = "okay";
 730
 731         u2phy0_otg: otg-port {
 732                 phy-supply = <&vcc_vbus_typec0>;
 733                 status = "okay";
 734         };
 735
 736         u2phy0_host: host-port {
 737                 phy-supply = <&vcc5v0_host>;
 738                 status = "okay";
 739         };
 740 };
 741
 742 &u2phy1 {
 743         status = "okay";
 744
 745         u2phy1_otg: otg-port {
 746                 phy-supply = <&vcc_vbus_typec1>;
 747                 status = "okay";
 748         };
 749
 750         u2phy1_host: host-port {
 751                 phy-supply = <&vcc5v0_host>;
 752                 status = "okay";
 753         };
 754 };
 755
 756 &uart0 {
 757         pinctrl-names = "default";
 758         pinctrl-0 = <&uart0_xfer &uart0_cts>;
 759         status = "okay";
 760 };
 761
 762 &uart2 {
 763         status = "okay";
 764 };
 765
 766 &usb_host0_ehci {
 767         status = "okay";
 768 };
 769
 770 &usb_host0_ohci {
 771         status = "okay";
 772 };
 773
 774 &usb_host1_ehci {
 775         status = "okay";
 776 };
 777
 778 &usb_host1_ohci {
 779         status = "okay";
 780 };
 781
 782 &usbdrd3_0 {
 783         status = "okay";
 784 };
 785
 786 &usbdrd_dwc3_0 {
 787         status = "okay";
 788 };
 789
 790 &usbdrd3_1 {
 791         status = "okay";
 792 };
 793
 794 &usbdrd_dwc3_1 {
 795         status = "okay";
 796         dr_mode = "host";
 797 };
 798
 799 &vopb {
 800         status = "okay";
 801 };
 802
 803 &vopb_mmu {
 804         status = "okay";
 805 };
 806
 807 &vopl {
 808         status = "okay";
 809 };
 810
 811 &vopl_mmu {
 812         status = "okay";
 813 };