SPDX: Convert all of our multiple license tags to Linux Kernel style
[oweals/u-boot.git] / arch / arm / dts / rk3368-lion.dts
1 // SPDX-License-Identifier: GPL-2.0+ OR X11
2 /*
3  * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
4  */
5
6 /dts-v1/;
7 #include "rk3368.dtsi"
8 #include "rk3368-lion-u-boot.dtsi"
9 #include <dt-bindings/input/input.h>
10
11 / {
12         model = "Theobroma Systems RK3368-uQ7 SoM";
13         compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368";
14
15         aliases {
16                 mmc0 = &emmc;
17                 mmc1 = &sdmmc;
18         };
19
20         memory@0 {
21                 device_type = "memory";
22                 reg = <0x0 0x0 0x0 0x80000000>;
23         };
24
25         ext_gmac: gmac-clk {
26                 compatible = "fixed-clock";
27                 clock-frequency = <125000000>;
28                 clock-output-names = "ext_gmac";
29                 #clock-cells = <0>;
30         };
31
32         vcc_sys: vcc-sys-regulator {
33                 compatible = "regulator-fixed";
34                 regulator-name = "vcc_sys";
35                 regulator-min-microvolt = <5000000>;
36                 regulator-max-microvolt = <5000000>;
37                 regulator-always-on;
38                 regulator-boot-on;
39         };
40 };
41
42 &uart0 {
43         status = "okay";
44 };
45
46 &emmc {
47         status = "okay";
48         bus-width = <8>;
49         cap-mmc-highspeed;
50         clock-frequency = <150000000>;
51         disable-wp;
52         keep-power-in-suspend;
53         non-removable;
54         num-slots = <1>;
55         vmmc-supply = <&vcc33_io>;
56         vqmmc-supply = <&vcc18_io>;
57         pinctrl-names = "default";
58         pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
59 };
60
61 &sdmmc {
62         status = "okay";
63 };
64
65 &gmac {
66         status = "okay";
67         phy-supply = <&vcc33_io>;
68         phy-mode = "rgmii";
69         clock_in_out = "input";
70         snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
71         snps,reset-active-low;
72         snps,reset-delays-us = <2 10000 50000>;
73         assigned-clocks = <&cru SCLK_MAC>;
74         assigned-clock-parents = <&ext_gmac>;
75         pinctrl-names = "default";
76         pinctrl-0 = <&rgmii_pins>;
77         tx_delay = <0x10>;
78         rx_delay = <0x10>;
79 };
80
81 &i2c0 {
82         status = "okay";
83
84         rk808: pmic@1b {
85                 compatible = "rockchip,rk808";
86                 reg = <0x1b>;
87                 interrupt-parent = <&gpio0>;
88                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
89                 rockchip,system-power-controller;
90                 vcc1-supply = <&vcc_sys>;
91                 vcc2-supply = <&vcc_sys>;
92                 vcc3-supply = <&vcc_sys>;
93                 vcc4-supply = <&vcc_sys>;
94                 vcc6-supply = <&vcc_sys>;
95                 vcc7-supply = <&vcc_sys>;
96                 vcc8-supply = <&vcc_sys>;
97                 vcc9-supply = <&vcc_sys>;
98                 vcc10-supply = <&vcc_sys>;
99                 vcc11-supply = <&vcc_sys>;
100                 vcc12-supply = <&vcc_sys>;
101                 clock-output-names = "xin32k", "rk808-clkout2";
102                 #clock-cells = <1>;
103
104                 regulators {
105                         vdd_cpu: DCDC_REG1 {
106                                 regulator-always-on;
107                                 regulator-boot-on;
108                                 regulator-min-microvolt = <700000>;
109                                 regulator-max-microvolt = <1500000>;
110                                 regulator-name = "vdd_cpu";
111                         };
112
113                         vdd_log: DCDC_REG2 {
114                                 regulator-always-on;
115                                 regulator-boot-on;
116                                 regulator-min-microvolt = <700000>;
117                                 regulator-max-microvolt = <1500000>;
118                                 regulator-name = "vdd_log";
119                         };
120
121                         vcc_ddr: DCDC_REG3 {
122                                 regulator-always-on;
123                                 regulator-boot-on;
124                                 regulator-name = "vcc_ddr";
125                         };
126
127                         vcc33_io: DCDC_REG4 {
128                                 regulator-always-on;
129                                 regulator-boot-on;
130                                 regulator-min-microvolt = <3300000>;
131                                 regulator-max-microvolt = <3300000>;
132                                 regulator-name = "vcc33_io";
133                         };
134
135                         vcc33_video: LDO_REG2 {
136                                 regulator-always-on;
137                                 regulator-boot-on;
138                                 regulator-min-microvolt = <3300000>;
139                                 regulator-max-microvolt = <3300000>;
140                                 regulator-name = "vcc33_video";
141                         };
142
143                         vdd10_pll: LDO_REG3 {
144                                 regulator-always-on;
145                                 regulator-boot-on;
146                                 regulator-min-microvolt = <1000000>;
147                                 regulator-max-microvolt = <1000000>;
148                                 regulator-name = "vdd10_pll";
149                         };
150
151                         vcc18_io: LDO_REG4 {
152                                 regulator-boot-on;
153                                 regulator-min-microvolt = <1800000>;
154                                 regulator-max-microvolt = <1800000>;
155                                 regulator-name = "vcc18_io";
156                         };
157
158                         vdd10_video: LDO_REG6 {
159                                 regulator-always-on;
160                                 regulator-boot-on;
161                                 regulator-min-microvolt = <1000000>;
162                                 regulator-max-microvolt = <1000000>;
163                                 regulator-name = "vdd10_video";
164                         };
165
166                         vcc18_video: LDO_REG8 {
167                                 regulator-always-on;
168                                 regulator-boot-on;
169                                 regulator-min-microvolt = <1800000>;
170                                 regulator-max-microvolt = <1800000>;
171                                 regulator-name = "vcc18_video";
172                         };
173                 };
174         };
175 };
176
177 &uart0 {
178         status = "okay";
179 };
180
181 &spi1 {
182         status = "okay";
183
184         #address-cells = <1>;
185         #size-cells = <0>;
186
187         spiflash: w25q32dw@0 {
188                 compatible = "spi-flash";
189                 reg = <0>;
190                 spi-max-frequency = <49500000>;
191                 spi-cpol;
192                 spi-cpha;
193         };
194 };