arch/arm/dts/r8a7790-lager.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Lager board
   4  *
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7790.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Lager";
  45         compatible = "renesas,lager", "renesas,r8a7790";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scifa1;
  50                 i2c8 = &gpioi2c1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &i2cexio0;
  53                 i2c11 = &i2cexio1;
  54                 i2c12 = &i2chdmi;
  55                 i2c13 = &i2cpwr;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@140000000 {
  69                 device_type = "memory";
  70                 reg = <1 0x40000000 0 0xc0000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 one {
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  87                 };
  88                 two {
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
  94                 };
  95                 three {
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 101                 };
 102                 four {
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110
 111         leds {
 112                 compatible = "gpio-leds";
 113                 led6 {
 114                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 115                 };
 116                 led7 {
 117                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 118                 };
 119                 led8 {
 120                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 121                 };
 122         };
 123
 124         fixedregulator3v3: regulator-3v3 {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "fixed-3.3V";
 127                 regulator-min-microvolt = <3300000>;
 128                 regulator-max-microvolt = <3300000>;
 129                 regulator-boot-on;
 130                 regulator-always-on;
 131         };
 132
 133         vcc_sdhi0: regulator-vcc-sdhi0 {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "SDHI0 Vcc";
 137                 regulator-min-microvolt = <3300000>;
 138                 regulator-max-microvolt = <3300000>;
 139
 140                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142         };
 143
 144         vccq_sdhi0: regulator-vccq-sdhi0 {
 145                 compatible = "regulator-gpio";
 146
 147                 regulator-name = "SDHI0 VccQ";
 148                 regulator-min-microvolt = <1800000>;
 149                 regulator-max-microvolt = <3300000>;
 150
 151                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 152                 gpios-states = <1>;
 153                 states = <3300000 1
 154                           1800000 0>;
 155         };
 156
 157         vcc_sdhi2: regulator-vcc-sdhi2 {
 158                 compatible = "regulator-fixed";
 159
 160                 regulator-name = "SDHI2 Vcc";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163
 164                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 165                 enable-active-high;
 166         };
 167
 168         vccq_sdhi2: regulator-vccq-sdhi2 {
 169                 compatible = "regulator-gpio";
 170
 171                 regulator-name = "SDHI2 VccQ";
 172                 regulator-min-microvolt = <1800000>;
 173                 regulator-max-microvolt = <3300000>;
 174
 175                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 176                 gpios-states = <1>;
 177                 states = <3300000 1
 178                           1800000 0>;
 179         };
 180
 181         audio_clock: audio_clock {
 182                 compatible = "fixed-clock";
 183                 #clock-cells = <0>;
 184                 clock-frequency = <11289600>;
 185         };
 186
 187         rsnd_ak4643: sound {
 188                 compatible = "simple-audio-card";
 189
 190                 simple-audio-card,format = "left_j";
 191                 simple-audio-card,bitclock-master = <&sndcodec>;
 192                 simple-audio-card,frame-master = <&sndcodec>;
 193
 194                 sndcpu: simple-audio-card,cpu {
 195                         sound-dai = <&rcar_sound>;
 196                 };
 197
 198                 sndcodec: simple-audio-card,codec {
 199                         sound-dai = <&ak4643>;
 200                         clocks = <&audio_clock>;
 201                 };
 202         };
 203
 204         vga-encoder {
 205                 compatible = "adi,adv7123";
 206
 207                 ports {
 208                         #address-cells = <1>;
 209                         #size-cells = <0>;
 210
 211                         port@0 {
 212                                 reg = <0>;
 213                                 adv7123_in: endpoint {
 214                                         remote-endpoint = <&du_out_rgb>;
 215                                 };
 216                         };
 217                         port@1 {
 218                                 reg = <1>;
 219                                 adv7123_out: endpoint {
 220                                         remote-endpoint = <&vga_in>;
 221                                 };
 222                         };
 223                 };
 224         };
 225
 226         vga {
 227                 compatible = "vga-connector";
 228
 229                 port {
 230                         vga_in: endpoint {
 231                                 remote-endpoint = <&adv7123_out>;
 232                         };
 233                 };
 234         };
 235
 236         hdmi-in {
 237                 compatible = "hdmi-connector";
 238                 type = "a";
 239
 240                 port {
 241                         hdmi_con_in: endpoint {
 242                                 remote-endpoint = <&adv7612_in>;
 243                         };
 244                 };
 245         };
 246
 247         cec_clock: cec-clock {
 248                 compatible = "fixed-clock";
 249                 #clock-cells = <0>;
 250                 clock-frequency = <12000000>;
 251         };
 252
 253         hdmi-out {
 254                 compatible = "hdmi-connector";
 255                 type = "a";
 256
 257                 port {
 258                         hdmi_con_out: endpoint {
 259                                 remote-endpoint = <&adv7511_out>;
 260                         };
 261                 };
 262         };
 263
 264         x2_clk: x2-clock {
 265                 compatible = "fixed-clock";
 266                 #clock-cells = <0>;
 267                 clock-frequency = <148500000>;
 268         };
 269
 270         x13_clk: x13-clock {
 271                 compatible = "fixed-clock";
 272                 #clock-cells = <0>;
 273                 clock-frequency = <148500000>;
 274         };
 275
 276         gpioi2c1: i2c-8 {
 277                 #address-cells = <1>;
 278                 #size-cells = <0>;
 279                 compatible = "i2c-gpio";
 280                 status = "disabled";
 281                 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 282                 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 283                 i2c-gpio,delay-us = <5>;
 284         };
 285
 286         gpioi2c2: i2c-9 {
 287                 #address-cells = <1>;
 288                 #size-cells = <0>;
 289                 compatible = "i2c-gpio";
 290                 status = "disabled";
 291                 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 292                 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 293                 i2c-gpio,delay-us = <5>;
 294         };
 295
 296         /*
 297          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 298          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 299          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 300          * Note: For testing the I2C slave feature, it is convenient to connect this
 301          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 302          * instantiate the slave device at runtime according to the documentation.
 303          * You can then communicate with the slave via IIC3.
 304          *
 305          * IIC0/I2C0 does not appear to support fallback to GPIO.
 306          */
 307         i2cexio0: i2c-10 {
 308                 compatible = "i2c-demux-pinctrl";
 309                 i2c-parent = <&iic0>, <&i2c0>;
 310                 i2c-bus-name = "i2c-exio0";
 311                 #address-cells = <1>;
 312                 #size-cells = <0>;
 313         };
 314
 315         /*
 316          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 317          * This is similar to the arangement described for i2cexio0 (above)
 318          * with a fallback to GPIO also provided.
 319          */
 320         i2cexio1: i2c-11 {
 321                 compatible = "i2c-demux-pinctrl";
 322                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 323                 i2c-bus-name = "i2c-exio1";
 324                 #address-cells = <1>;
 325                 #size-cells = <0>;
 326         };
 327
 328         /*
 329          * IIC2 and I2C2 may be switched using pinmux.
 330          * A fallback to GPIO is also provided.
 331          */
 332         i2chdmi: i2c-12 {
 333                 compatible = "i2c-demux-pinctrl";
 334                 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 335                 i2c-bus-name = "i2c-hdmi";
 336                 #address-cells = <1>;
 337                 #size-cells = <0>;
 338
 339                 ak4643: codec@12 {
 340                         compatible = "asahi-kasei,ak4643";
 341                         #sound-dai-cells = <0>;
 342                         reg = <0x12>;
 343                 };
 344
 345                 composite-in@20 {
 346                         compatible = "adi,adv7180";
 347                         reg = <0x20>;
 348                         remote = <&vin1>;
 349
 350                         port {
 351                                 adv7180: endpoint {
 352                                         bus-width = <8>;
 353                                         remote-endpoint = <&vin1ep0>;
 354                                 };
 355                         };
 356                 };
 357
 358                 hdmi@39 {
 359                         compatible = "adi,adv7511w";
 360                         reg = <0x39>;
 361                         interrupt-parent = <&gpio1>;
 362                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 363                         clocks = <&cec_clock>;
 364                         clock-names = "cec";
 365
 366                         adi,input-depth = <8>;
 367                         adi,input-colorspace = "rgb";
 368                         adi,input-clock = "1x";
 369                         adi,input-style = <1>;
 370                         adi,input-justification = "evenly";
 371
 372                         ports {
 373                                 #address-cells = <1>;
 374                                 #size-cells = <0>;
 375
 376                                 port@0 {
 377                                         reg = <0>;
 378                                         adv7511_in: endpoint {
 379                                                 remote-endpoint = <&lvds0_out>;
 380                                         };
 381                                 };
 382
 383                                 port@1 {
 384                                         reg = <1>;
 385                                         adv7511_out: endpoint {
 386                                                 remote-endpoint = <&hdmi_con_out>;
 387                                         };
 388                                 };
 389                         };
 390                 };
 391
 392                 hdmi-in@4c {
 393                         compatible = "adi,adv7612";
 394                         reg = <0x4c>;
 395                         interrupt-parent = <&gpio1>;
 396                         interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 397                         default-input = <0>;
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 port@0 {
 404                                         reg = <0>;
 405                                         adv7612_in: endpoint {
 406                                                 remote-endpoint = <&hdmi_con_in>;
 407                                         };
 408                                 };
 409
 410                                 port@2 {
 411                                         reg = <2>;
 412                                         adv7612_out: endpoint {
 413                                                 remote-endpoint = <&vin0ep2>;
 414                                         };
 415                                 };
 416                         };
 417                 };
 418         };
 419
 420         /*
 421          * IIC3 and I2C3 may be switched using pinmux.
 422          * IIC3/I2C3 does not appear to support fallback to GPIO.
 423          */
 424         i2cpwr: i2c-13 {
 425                 compatible = "i2c-demux-pinctrl";
 426                 i2c-parent = <&iic3>, <&i2c3>;
 427                 i2c-bus-name = "i2c-pwr";
 428                 #address-cells = <1>;
 429                 #size-cells = <0>;
 430
 431                 pmic@58 {
 432                         compatible = "dlg,da9063";
 433                         reg = <0x58>;
 434                         interrupt-parent = <&irqc0>;
 435                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 436                         interrupt-controller;
 437
 438                         rtc {
 439                                 compatible = "dlg,da9063-rtc";
 440                         };
 441
 442                         wdt {
 443                                 compatible = "dlg,da9063-watchdog";
 444                         };
 445                 };
 446
 447                 vdd_dvfs: regulator@68 {
 448                         compatible = "dlg,da9210";
 449                         reg = <0x68>;
 450                         interrupt-parent = <&irqc0>;
 451                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 452
 453                         regulator-min-microvolt = <1000000>;
 454                         regulator-max-microvolt = <1000000>;
 455                         regulator-boot-on;
 456                         regulator-always-on;
 457                 };
 458         };
 459 };
 460
 461 &du {
 462         pinctrl-0 = <&du_pins>;
 463         pinctrl-names = "default";
 464         status = "okay";
 465
 466         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
 467                  <&x13_clk>, <&x2_clk>;
 468         clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 469
 470         ports {
 471                 port@0 {
 472                         endpoint {
 473                                 remote-endpoint = <&adv7123_in>;
 474                         };
 475                 };
 476         };
 477 };
 478
 479 &lvds0 {
 480         status = "okay";
 481
 482         ports {
 483                 port@1 {
 484                         endpoint {
 485                                 remote-endpoint = <&adv7511_in>;
 486                         };
 487                 };
 488         };
 489 };
 490
 491 &lvds1 {
 492         ports {
 493                 port@1 {
 494                         lvds_connector: endpoint {
 495                         };
 496                 };
 497         };
 498 };
 499
 500 &extal_clk {
 501         clock-frequency = <20000000>;
 502 };
 503
 504 &pfc {
 505         pinctrl-0 = <&scif_clk_pins>;
 506         pinctrl-names = "default";
 507
 508         du_pins: du {
 509                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 510                 function = "du";
 511         };
 512
 513         scif0_pins: scif0 {
 514                 groups = "scif0_data";
 515                 function = "scif0";
 516         };
 517
 518         scif_clk_pins: scif_clk {
 519                 groups = "scif_clk";
 520                 function = "scif_clk";
 521         };
 522
 523         ether_pins: ether {
 524                 groups = "eth_link", "eth_mdio", "eth_rmii";
 525                 function = "eth";
 526         };
 527
 528         phy1_pins: phy1 {
 529                 groups = "intc_irq0";
 530                 function = "intc";
 531         };
 532
 533         scifa1_pins: scifa1 {
 534                 groups = "scifa1_data";
 535                 function = "scifa1";
 536         };
 537
 538         sdhi0_pins: sd0 {
 539                 groups = "sdhi0_data4", "sdhi0_ctrl";
 540                 function = "sdhi0";
 541                 power-source = <3300>;
 542         };
 543
 544         sdhi0_pins_uhs: sd0_uhs {
 545                 groups = "sdhi0_data4", "sdhi0_ctrl";
 546                 function = "sdhi0";
 547                 power-source = <1800>;
 548         };
 549
 550         sdhi2_pins: sd2 {
 551                 groups = "sdhi2_data4", "sdhi2_ctrl";
 552                 function = "sdhi2";
 553                 power-source = <3300>;
 554         };
 555
 556         sdhi2_pins_uhs: sd2_uhs {
 557                 groups = "sdhi2_data4", "sdhi2_ctrl";
 558                 function = "sdhi2";
 559                 power-source = <1800>;
 560         };
 561
 562         mmc1_pins: mmc1 {
 563                 groups = "mmc1_data8", "mmc1_ctrl";
 564                 function = "mmc1";
 565         };
 566
 567         qspi_pins: qspi {
 568                 groups = "qspi_ctrl", "qspi_data4";
 569                 function = "qspi";
 570         };
 571
 572         msiof1_pins: msiof1 {
 573                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 574                                  "msiof1_tx";
 575                 function = "msiof1";
 576         };
 577
 578         i2c0_pins: i2c0 {
 579                 groups = "i2c0";
 580                 function = "i2c0";
 581         };
 582
 583         iic0_pins: iic0 {
 584                 groups = "iic0";
 585                 function = "iic0";
 586         };
 587
 588         i2c1_pins: i2c1 {
 589                 groups = "i2c1";
 590                 function = "i2c1";
 591         };
 592
 593         iic1_pins: iic1 {
 594                 groups = "iic1";
 595                 function = "iic1";
 596         };
 597
 598         i2c2_pins: i2c2 {
 599                 groups = "i2c2";
 600                 function = "i2c2";
 601         };
 602
 603         iic2_pins: iic2 {
 604                 groups = "iic2";
 605                 function = "iic2";
 606         };
 607
 608         i2c3_pins: i2c3 {
 609                 groups = "i2c3";
 610                 function = "i2c3";
 611         };
 612
 613         iic3_pins: iic3 {
 614                 groups = "iic3";
 615                 function = "iic3";
 616         };
 617
 618         hsusb_pins: hsusb {
 619                 groups = "usb0_ovc_vbus";
 620                 function = "usb0";
 621         };
 622
 623         usb0_pins: usb0 {
 624                 groups = "usb0";
 625                 function = "usb0";
 626         };
 627
 628         usb1_pins: usb1 {
 629                 groups = "usb1";
 630                 function = "usb1";
 631         };
 632
 633         usb2_pins: usb2 {
 634                 groups = "usb2";
 635                 function = "usb2";
 636         };
 637
 638         vin0_pins: vin0 {
 639                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 640                 function = "vin0";
 641         };
 642
 643         vin1_pins: vin1 {
 644                 groups = "vin1_data8", "vin1_clk";
 645                 function = "vin1";
 646         };
 647
 648         sound_pins: sound {
 649                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 650                 function = "ssi";
 651         };
 652
 653         sound_clk_pins: sound_clk {
 654                 groups = "audio_clk_a";
 655                 function = "audio_clk";
 656         };
 657 };
 658
 659 &ether {
 660         pinctrl-0 = <&ether_pins &phy1_pins>;
 661         pinctrl-names = "default";
 662
 663         phy-handle = <&phy1>;
 664         renesas,ether-link-active-low;
 665         status = "okay";
 666
 667         phy1: ethernet-phy@1 {
 668                 reg = <1>;
 669                 interrupt-parent = <&irqc0>;
 670                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 671                 micrel,led-mode = <1>;
 672         };
 673 };
 674
 675 &cmt0 {
 676         status = "okay";
 677 };
 678
 679 &mmcif1 {
 680         pinctrl-0 = <&mmc1_pins>;
 681         pinctrl-names = "default";
 682
 683         vmmc-supply = <&fixedregulator3v3>;
 684         bus-width = <8>;
 685         non-removable;
 686         status = "okay";
 687 };
 688
 689 &sata1 {
 690         status = "okay";
 691 };
 692
 693 &qspi {
 694         pinctrl-0 = <&qspi_pins>;
 695         pinctrl-names = "default";
 696
 697         status = "okay";
 698
 699         flash: flash@0 {
 700                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 701                 reg = <0>;
 702                 spi-max-frequency = <30000000>;
 703                 spi-tx-bus-width = <4>;
 704                 spi-rx-bus-width = <4>;
 705                 spi-cpha;
 706                 spi-cpol;
 707                 m25p,fast-read;
 708
 709                 partitions {
 710                         compatible = "fixed-partitions";
 711                         #address-cells = <1>;
 712                         #size-cells = <1>;
 713
 714                         partition@0 {
 715                                 label = "loader";
 716                                 reg = <0x00000000 0x00040000>;
 717                                 read-only;
 718                         };
 719                         partition@40000 {
 720                                 label = "user";
 721                                 reg = <0x00040000 0x00400000>;
 722                                 read-only;
 723                         };
 724                         partition@440000 {
 725                                 label = "flash";
 726                                 reg = <0x00440000 0x03bc0000>;
 727                         };
 728                 };
 729         };
 730 };
 731
 732 &scif0 {
 733         pinctrl-0 = <&scif0_pins>;
 734         pinctrl-names = "default";
 735
 736         status = "okay";
 737 };
 738
 739 &scifa1 {
 740         pinctrl-0 = <&scifa1_pins>;
 741         pinctrl-names = "default";
 742
 743         status = "okay";
 744 };
 745
 746 &scif_clk {
 747         clock-frequency = <14745600>;
 748 };
 749
 750 &msiof1 {
 751         pinctrl-0 = <&msiof1_pins>;
 752         pinctrl-names = "default";
 753
 754         status = "okay";
 755
 756         pmic: pmic@0 {
 757                 compatible = "renesas,r2a11302ft";
 758                 reg = <0>;
 759                 spi-max-frequency = <6000000>;
 760                 spi-cpol;
 761                 spi-cpha;
 762         };
 763 };
 764
 765 &sdhi0 {
 766         pinctrl-0 = <&sdhi0_pins>;
 767         pinctrl-1 = <&sdhi0_pins_uhs>;
 768         pinctrl-names = "default", "state_uhs";
 769
 770         vmmc-supply = <&vcc_sdhi0>;
 771         vqmmc-supply = <&vccq_sdhi0>;
 772         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 773         sd-uhs-sdr50;
 774         sd-uhs-sdr104;
 775         status = "okay";
 776 };
 777
 778 &sdhi2 {
 779         pinctrl-0 = <&sdhi2_pins>;
 780         pinctrl-1 = <&sdhi2_pins_uhs>;
 781         pinctrl-names = "default", "state_uhs";
 782
 783         vmmc-supply = <&vcc_sdhi2>;
 784         vqmmc-supply = <&vccq_sdhi2>;
 785         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 786         sd-uhs-sdr50;
 787         status = "okay";
 788 };
 789
 790 &cpu0 {
 791         cpu0-supply = <&vdd_dvfs>;
 792 };
 793
 794 &i2c0   {
 795         pinctrl-0 = <&i2c0_pins>;
 796         pinctrl-names = "i2c-exio0";
 797 };
 798
 799 &iic0   {
 800         pinctrl-0 = <&iic0_pins>;
 801         pinctrl-names = "i2c-exio0";
 802 };
 803
 804 &i2c1   {
 805         pinctrl-0 = <&i2c1_pins>;
 806         pinctrl-names = "i2c-exio1";
 807 };
 808
 809 &iic1   {
 810         pinctrl-0 = <&iic1_pins>;
 811         pinctrl-names = "i2c-exio1";
 812 };
 813
 814 &i2c2   {
 815         pinctrl-0 = <&i2c2_pins>;
 816         pinctrl-names = "i2c-hdmi";
 817
 818         clock-frequency = <100000>;
 819 };
 820
 821 &iic2   {
 822         pinctrl-0 = <&iic2_pins>;
 823         pinctrl-names = "i2c-hdmi";
 824
 825         clock-frequency = <100000>;
 826 };
 827
 828 &i2c3   {
 829         pinctrl-0 = <&i2c3_pins>;
 830         pinctrl-names = "i2c-pwr";
 831 };
 832
 833 &iic3   {
 834         pinctrl-0 = <&iic3_pins>;
 835         pinctrl-names = "i2c-pwr";
 836 };
 837
 838 &pci0 {
 839         status = "okay";
 840         pinctrl-0 = <&usb0_pins>;
 841         pinctrl-names = "default";
 842 };
 843
 844 &pci1 {
 845         status = "okay";
 846         pinctrl-0 = <&usb1_pins>;
 847         pinctrl-names = "default";
 848 };
 849
 850 &xhci {
 851         status = "okay";
 852         pinctrl-0 = <&usb2_pins>;
 853         pinctrl-names = "default";
 854 };
 855
 856 &pci2 {
 857         status = "okay";
 858         pinctrl-0 = <&usb2_pins>;
 859         pinctrl-names = "default";
 860 };
 861
 862 &hsusb {
 863         status = "okay";
 864         pinctrl-0 = <&hsusb_pins>;
 865         pinctrl-names = "default";
 866         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 867 };
 868
 869 &usbphy {
 870         status = "okay";
 871 };
 872
 873 /* HDMI video input */
 874 &vin0 {
 875         pinctrl-0 = <&vin0_pins>;
 876         pinctrl-names = "default";
 877
 878         status = "okay";
 879
 880         port {
 881                 vin0ep2: endpoint {
 882                         remote-endpoint = <&adv7612_out>;
 883                         bus-width = <24>;
 884                         hsync-active = <0>;
 885                         vsync-active = <0>;
 886                         pclk-sample = <1>;
 887                         data-active = <1>;
 888                 };
 889         };
 890 };
 891
 892 /* composite video input */
 893 &vin1 {
 894         pinctrl-0 = <&vin1_pins>;
 895         pinctrl-names = "default";
 896
 897         status = "okay";
 898
 899         port {
 900                 vin1ep0: endpoint {
 901                         remote-endpoint = <&adv7180>;
 902                         bus-width = <8>;
 903                 };
 904         };
 905 };
 906
 907 &rcar_sound {
 908         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 909         pinctrl-names = "default";
 910
 911         /* Single DAI */
 912         #sound-dai-cells = <0>;
 913
 914         status = "okay";
 915
 916         rcar_sound,dai {
 917                 dai0 {
 918                         playback = <&ssi0 &src2 &dvc0>;
 919                         capture  = <&ssi1 &src3 &dvc1>;
 920                 };
 921         };
 922 };
 923
 924 &rwdt {
 925         timeout-sec = <60>;
 926         status = "okay";
 927 };
 928
 929 &ssi1 {
 930         shared-pin;
 931 };