arch/arm/dts/fsl-lx2160a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP lx2160a SOC common device tree source
   4  *
   5  * Copyright 2018-2020 NXP
   6  *
   7  */
   8
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10
  11 / {
  12         compatible = "fsl,lx2160a";
  13         interrupt-parent = <&gic>;
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         memory@80000000 {
  18                 device_type = "memory";
  19                 reg = <0x00000000 0x80000000 0 0x80000000>;
  20                       /* DRAM space - 1, size : 2 GB DRAM */
  21         };
  22
  23         sysclk: sysclk {
  24                 compatible = "fixed-clock";
  25                 #clock-cells = <0>;
  26                 clock-frequency = <100000000>;
  27                 clock-output-names = "sysclk";
  28         };
  29
  30         clockgen: clocking@1300000 {
  31                 compatible = "fsl,ls2080a-clockgen";
  32                 reg = <0 0x1300000 0 0xa0000>;
  33                 #clock-cells = <2>;
  34                 clocks = <&sysclk>;
  35         };
  36
  37         gic: interrupt-controller@6000000 {
  38                 compatible = "arm,gic-v3";
  39                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  40                       <0x0 0x06200000 0 0x100000>; /* GICR */
  41                 #interrupt-cells = <3>;
  42                 interrupt-controller;
  43                 interrupts = <1 9 0x4>;
  44         };
  45
  46         timer {
  47                 compatible = "arm,armv8-timer";
  48                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  49                              <1 14 0x8>, /* Physical NS PPI, active-low */
  50                              <1 11 0x8>, /* Virtual PPI, active-low */
  51                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  52         };
  53
  54         fspi: flexspi@20c0000 {
  55                 compatible = "nxp,lx2160a-fspi";
  56                 #address-cells = <1>;
  57                 #size-cells = <0>;
  58                 reg = <0x0 0x20c0000 0x0 0x10000>,
  59                         <0x0 0x20000000 0x0 0x10000000>;
  60                 reg-names = "fspi_base", "fspi_mmap";
  61                 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
  62                 clock-names = "fspi_en", "fspi";
  63                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
  64                 status = "disabled";
  65         };
  66
  67         i2c0: i2c@2000000 {
  68                 compatible = "fsl,vf610-i2c";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 reg = <0x0 0x2000000 0x0 0x10000>;
  72                 interrupts = <0 34 4>;
  73                 scl-gpio = <&gpio2 15 0>;
  74                 status = "disabled";
  75         };
  76
  77         i2c1: i2c@2010000 {
  78                 compatible = "fsl,vf610-i2c";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81                 reg = <0x0 0x2010000 0x0 0x10000>;
  82                 interrupts = <0 34 4>;
  83                 status = "disabled";
  84         };
  85
  86         i2c2: i2c@2020000 {
  87                 compatible = "fsl,vf610-i2c";
  88                 #address-cells = <1>;
  89                 #size-cells = <0>;
  90                 reg = <0x0 0x2020000 0x0 0x10000>;
  91                 interrupts = <0 35 4>;
  92                 status = "disabled";
  93         };
  94
  95         i2c3: i2c@2030000 {
  96                 compatible = "fsl,vf610-i2c";
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99                 reg = <0x0 0x2030000 0x0 0x10000>;
 100                 interrupts = <0 35 4>;
 101                 status = "disabled";
 102         };
 103
 104         i2c4: i2c@2040000 {
 105                 compatible = "fsl,vf610-i2c";
 106                 #address-cells = <1>;
 107                 #size-cells = <0>;
 108                 reg = <0x0 0x2040000 0x0 0x10000>;
 109                 interrupts = <0 74 4>;
 110                 scl-gpio = <&gpio2 16 0>;
 111                 status = "disabled";
 112         };
 113
 114         i2c5: i2c@2050000 {
 115                 compatible = "fsl,vf610-i2c";
 116                 #address-cells = <1>;
 117                 #size-cells = <0>;
 118                 reg = <0x0 0x2050000 0x0 0x10000>;
 119                 interrupts = <0 74 4>;
 120                 status = "disabled";
 121         };
 122
 123         i2c6: i2c@2060000 {
 124                 compatible = "fsl,vf610-i2c";
 125                 #address-cells = <1>;
 126                 #size-cells = <0>;
 127                 reg = <0x0 0x2060000 0x0 0x10000>;
 128                 interrupts = <0 75 4>;
 129                 status = "disabled";
 130         };
 131
 132         i2c7: i2c@2070000 {
 133                 compatible = "fsl,vf610-i2c";
 134                 #address-cells = <1>;
 135                 #size-cells = <0>;
 136                 reg = <0x0 0x2070000 0x0 0x10000>;
 137                 interrupts = <0 75 4>;
 138                 status = "disabled";
 139         };
 140
 141         uart0: serial@21c0000 {
 142                 compatible = "arm,pl011";
 143                 reg = <0x0 0x21c0000 0x0 0x1000>;
 144                 clocks = <&clockgen 4 0>;
 145                 status = "disabled";
 146         };
 147
 148         uart1: serial@21d0000 {
 149                 compatible = "arm,pl011";
 150                 reg = <0x0 0x21d0000 0x0 0x1000>;
 151                 clocks = <&clockgen 4 0>;
 152                 status = "disabled";
 153         };
 154
 155         uart2: serial@21e0000 {
 156                 compatible = "arm,pl011";
 157                 reg = <0x0 0x21e0000 0x0 0x1000>;
 158                 clocks = <&clockgen 4 0>;
 159                 status = "disabled";
 160         };
 161
 162         uart3: serial@21f0000 {
 163                 compatible = "arm,pl011";
 164                 reg = <0x0 0x21f0000 0x0 0x1000>;
 165                 clocks = <&clockgen 4 0>;
 166                 status = "disabled";
 167         };
 168
 169         dspi0: dspi@2100000 {
 170                 compatible = "fsl,vf610-dspi";
 171                 #address-cells = <1>;
 172                 #size-cells = <0>;
 173                 reg = <0x0 0x2100000 0x0 0x10000>;
 174                 interrupts = <0 26 0x4>; /* Level high type */
 175                 num-cs = <6>;
 176         };
 177
 178         dspi1: dspi@2110000 {
 179                 compatible = "fsl,vf610-dspi";
 180                 #address-cells = <1>;
 181                 #size-cells = <0>;
 182                 reg = <0x0 0x2110000 0x0 0x10000>;
 183                 interrupts = <0 26 0x4>; /* Level high type */
 184                 num-cs = <6>;
 185         };
 186
 187         dspi2: dspi@2120000 {
 188                 compatible = "fsl,vf610-dspi";
 189                 #address-cells = <1>;
 190                 #size-cells = <0>;
 191                 reg = <0x0 0x2120000 0x0 0x10000>;
 192                 interrupts = <0 241 0x4>; /* Level high type */
 193                 num-cs = <6>;
 194         };
 195
 196         gpio2: gpio@2320000 {
 197                 compatible = "fsl,qoriq-gpio";
 198                 reg = <0x0 0x2320000 0x0 0x10000>;
 199                 interrupts = <0 37 4>;
 200                 gpio-controller;
 201                 little-endian;
 202                 #gpio-cells = <2>;
 203                 interrupt-controller;
 204                 #interrupt-cells = <2>;
 205         };
 206
 207         usb0: usb3@3100000 {
 208                 compatible = "fsl,layerscape-dwc3";
 209                 reg = <0x0 0x3100000 0x0 0x10000>;
 210                 interrupts = <0 80 0x4>; /* Level high type */
 211                 dr_mode = "host";
 212         };
 213
 214         usb1: usb3@3110000 {
 215                 compatible = "fsl,layerscape-dwc3";
 216                 reg = <0x0 0x3110000 0x0 0x10000>;
 217                 interrupts = <0 81 0x4>; /* Level high type */
 218                 dr_mode = "host";
 219         };
 220
 221         esdhc0: esdhc@2140000 {
 222                 compatible = "fsl,esdhc";
 223                 reg = <0x0 0x2140000 0x0 0x10000>;
 224                 interrupts = <0 28 0x4>; /* Level high type */
 225                 clocks = <&clockgen 4 1>;
 226                 voltage-ranges = <1800 1800 3300 3300>;
 227                 sdhci,auto-cmd12;
 228                 little-endian;
 229                 bus-width = <4>;
 230                 status = "disabled";
 231         };
 232
 233         esdhc1: esdhc@2150000 {
 234                 compatible = "fsl,esdhc";
 235                 reg = <0x0 0x2150000 0x0 0x10000>;
 236                 interrupts = <0 63 0x4>; /* Level high type */
 237                 clocks = <&clockgen 4 1>;
 238                 voltage-ranges = <1800 1800 3300 3300>;
 239                 sdhci,auto-cmd12;
 240                 non-removable;
 241                 little-endian;
 242                 bus-width = <4>;
 243                 status = "disabled";
 244         };
 245
 246         sata0: sata@3200000 {
 247                         compatible = "fsl,ls2080a-ahci";
 248                         reg = <0x0 0x3200000 0x0 0x10000>;
 249                         interrupts = <0 133 4>;
 250                         clocks = <&clockgen 4 3>;
 251                         status = "disabled";
 252
 253         };
 254
 255         sata1: sata@3210000 {
 256                         compatible = "fsl,ls2080a-ahci";
 257                         reg = <0x0 0x3210000 0x0 0x10000>;
 258                         interrupts = <0 136 4>;
 259                         clocks = <&clockgen 4 3>;
 260                         status = "disabled";
 261
 262         };
 263
 264         sata2: sata@3220000 {
 265                         compatible = "fsl,ls2080a-ahci";
 266                         reg = <0x0 0x3220000 0x0 0x10000>;
 267                         interrupts = <0 97 4>;
 268                         clocks = <&clockgen 4 3>;
 269                         status = "disabled";
 270
 271         };
 272
 273         sata3: sata@3230000 {
 274                         compatible = "fsl,ls2080a-ahci";
 275                         reg = <0x0 0x3230000 0x0 0x10000>;
 276                         interrupts = <0 100 4>;
 277                         clocks = <&clockgen 4 3>;
 278                         status = "disabled";
 279
 280         };
 281
 282         pcie@3400000 {
 283                 compatible = "fsl,lx2160a-pcie";
 284                 reg = <0x00 0x03400000 0x0 0x80000   /* PAB registers */
 285                        0x00 0x03480000 0x0 0x40000   /* LUT registers */
 286                        0x00 0x034c0000 0x0 0x40000   /* PF control registers */
 287                        0x80 0x00000000 0x0 0x1000>; /* configuration space */
 288                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 289                 #address-cells = <3>;
 290                 #size-cells = <2>;
 291                 device_type = "pci";
 292                 bus-range = <0x0 0xff>;
 293                 ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
 294         };
 295
 296         pcie@3500000 {
 297                 compatible = "fsl,lx2160a-pcie";
 298                 reg = <0x00 0x03500000 0x0 0x80000   /* PAB registers */
 299                        0x00 0x03580000 0x0 0x40000   /* LUT registers */
 300                        0x00 0x035c0000 0x0 0x40000   /* PF control registers */
 301                        0x88 0x00000000 0x0 0x1000>; /* configuration space */
 302                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 303                 #address-cells = <3>;
 304                 #size-cells = <2>;
 305                 device_type = "pci";
 306                 num-lanes = <2>;
 307                 bus-range = <0x0 0xff>;
 308                 ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>;
 309         };
 310
 311         pcie@3600000 {
 312                 compatible = "fsl,lx2160a-pcie";
 313                 reg = <0x00 0x03600000 0x0 0x80000   /* PAB registers */
 314                        0x00 0x03680000 0x0 0x40000   /* LUT registers */
 315                        0x00 0x036c0000 0x0 0x40000   /* PF control registers */
 316                        0x90 0x00000000 0x0 0x1000>; /* configuration space */
 317                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 318                 #address-cells = <3>;
 319                 #size-cells = <2>;
 320                 device_type = "pci";
 321                 bus-range = <0x0 0xff>;
 322                 ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>;
 323         };
 324
 325         pcie@3700000 {
 326                 compatible = "fsl,lx2160a-pcie";
 327                 reg = <0x00 0x03700000 0x0 0x80000   /* PAB registers */
 328                        0x00 0x03780000 0x0 0x40000   /* LUT registers */
 329                        0x00 0x037c0000 0x0 0x40000   /* PF control registers */
 330                        0x98 0x00000000 0x0 0x1000>; /* configuration space */
 331                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 332                 #address-cells = <3>;
 333                 #size-cells = <2>;
 334                 device_type = "pci";
 335                 bus-range = <0x0 0xff>;
 336                 ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>;
 337         };
 338
 339         pcie@3800000 {
 340                 compatible = "fsl,lx2160a-pcie";
 341                 reg = <0x00 0x03800000 0x0 0x80000   /* PAB registers */
 342                        0x00 0x03880000 0x0 0x40000   /* LUT registers */
 343                        0x00 0x038c0000 0x0 0x40000   /* PF control registers */
 344                        0xa0 0x00000000 0x0 0x1000>; /* configuration space */
 345                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 346                 #address-cells = <3>;
 347                 #size-cells = <2>;
 348                 device_type = "pci";
 349                 bus-range = <0x0 0xff>;
 350                 ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>;
 351         };
 352
 353         pcie@3900000 {
 354                 compatible = "fsl,lx2160a-pcie";
 355                 reg = <0x00 0x03900000 0x0 0x80000   /* PAB registers */
 356                        0x00 0x03980000 0x0 0x40000   /* LUT registers */
 357                        0x00 0x039c0000 0x0 0x40000   /* PF control registers */
 358                        0xa8 0x00000000 0x0 0x1000>; /* configuration space */
 359                 reg-names = "ccsr", "lut", "pf_ctrl", "config";
 360                 #address-cells = <3>;
 361                 #size-cells = <2>;
 362                 device_type = "pci";
 363                 bus-range = <0x0 0xff>;
 364                 ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
 365         };
 366
 367         fsl_mc: fsl-mc@80c000000 {
 368                 compatible = "fsl,qoriq-mc", "simple-mfd";
 369                 reg = <0x00000008 0x0c000000 0 0x40>,
 370                       <0x00000000 0x08340000 0 0x40000>;
 371                 #address-cells = <3>;
 372                 #size-cells = <1>;
 373
 374                 /*
 375                  * Region type 0x0 - MC portals
 376                  * Region type 0x1 - QBMAN portals
 377                  */
 378                 ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
 379                           0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
 380
 381                 dpmacs {
 382                         compatible = "simple-mfd";
 383                         #address-cells = <1>;
 384                         #size-cells = <0>;
 385
 386                         dpmac1: dpmac@1 {
 387                                 compatible = "fsl,qoriq-mc-dpmac";
 388                                 reg = <0x1>;
 389                                 status = "disabled";
 390                         };
 391
 392                         dpmac2: dpmac@2 {
 393                                 compatible = "fsl,qoriq-mc-dpmac";
 394                                 reg = <0x2>;
 395                                 status = "disabled";
 396                         };
 397
 398                         dpmac3: dpmac@3 {
 399                                 compatible = "fsl,qoriq-mc-dpmac";
 400                                 reg = <0x3>;
 401                                 status = "disabled";
 402                         };
 403
 404                         dpmac4: dpmac@4 {
 405                                 compatible = "fsl,qoriq-mc-dpmac";
 406                                 reg = <0x4>;
 407                                 status = "disabled";
 408                         };
 409
 410                         dpmac5: dpmac@5 {
 411                                 compatible = "fsl,qoriq-mc-dpmac";
 412                                 reg = <0x5>;
 413                                 status = "disabled";
 414                         };
 415
 416                         dpmac6: dpmac@6 {
 417                                 compatible = "fsl,qoriq-mc-dpmac";
 418                                 reg = <0x6>;
 419                                 status = "disabled";
 420                         };
 421
 422                         dpmac7: dpmac@7 {
 423                                 compatible = "fsl,qoriq-mc-dpmac";
 424                                 reg = <0x7>;
 425                                 status = "disabled";
 426                         };
 427
 428                         dpmac8: dpmac@8 {
 429                                 compatible = "fsl,qoriq-mc-dpmac";
 430                                 reg = <0x8>;
 431                                 status = "disabled";
 432                         };
 433
 434                         dpmac9: dpmac@9 {
 435                                 compatible = "fsl,qoriq-mc-dpmac";
 436                                 reg = <0x9>;
 437                                 status = "disabled";
 438                         };
 439
 440                         dpmac10: dpmac@a {
 441                                 compatible = "fsl,qoriq-mc-dpmac";
 442                                 reg = <0xa>;
 443                                 status = "disabled";
 444                         };
 445
 446                         dpmac11: dpmac@b {
 447                                 compatible = "fsl,qoriq-mc-dpmac";
 448                                 reg = <0xb>;
 449                                 status = "disabled";
 450                         };
 451
 452                         dpmac12: dpmac@c {
 453                                 compatible = "fsl,qoriq-mc-dpmac";
 454                                 reg = <0xc>;
 455                                 status = "disabled";
 456                         };
 457
 458                         dpmac13: dpmac@d {
 459                                 compatible = "fsl,qoriq-mc-dpmac";
 460                                 reg = <0xd>;
 461                                 status = "disabled";
 462                         };
 463
 464                         dpmac14: dpmac@e {
 465                                 compatible = "fsl,qoriq-mc-dpmac";
 466                                 reg = <0xe>;
 467                                 status = "disabled";
 468                         };
 469
 470                         dpmac15: dpmac@f {
 471                                 compatible = "fsl,qoriq-mc-dpmac";
 472                                 reg = <0xf>;
 473                                 status = "disabled";
 474                         };
 475
 476                         dpmac16: dpmac@10 {
 477                                 compatible = "fsl,qoriq-mc-dpmac";
 478                                 reg = <0x10>;
 479                                 status = "disabled";
 480                         };
 481
 482                         dpmac17: dpmac@11 {
 483                                 compatible = "fsl,qoriq-mc-dpmac";
 484                                 reg = <0x11>;
 485                                 status = "disabled";
 486                         };
 487
 488                         dpmac18: dpmac@12 {
 489                                 compatible = "fsl,qoriq-mc-dpmac";
 490                                 reg = <0x12>;
 491                                 status = "disabled";
 492                         };
 493                 };
 494         };
 495
 496         /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
 497         emdio1: mdio@8b96000 {
 498                 compatible = "fsl,ls-mdio";
 499                 reg = <0x0 0x8b96000 0x0 0x1000>;
 500                 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 501                 #address-cells = <1>;
 502                 #size-cells = <0>;
 503                 status = "disabled";
 504         };
 505
 506         /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
 507         emdio2: mdio@8b97000 {
 508                 compatible = "fsl,ls-mdio";
 509                 reg = <0x0 0x8b97000 0x0 0x1000>;
 510                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 511                 #address-cells = <1>;
 512                 #size-cells = <0>;
 513                 status = "disabled";
 514         };
 515         firmware {
 516                 optee {
 517                         compatible = "linaro,optee-tz";
 518                         method = "smc";
 519                 };
 520         };
 521 };